- 07 Aug, 2019 10 commits
-
-
Kuninori Morimoto authored
snd_soc_dapm_new_controls() registers controls by using for(... i < num; ...). It means if widget was NULL, num should be zero. Thus, we don't need to check about widget pointer. This patch also cares missing return value. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87ftmdahow.wl-kuninori.morimoto.gx@renesas.comReviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
snd_soc_rtdcom_add() is using both "rtdcom" and "new_rtdcom" as variable name, but these are not used at same time. Let's reuse rtdcom. Signed-off-by:
-
Kuninori Morimoto authored
It doesn't removes list during loop at snd_soc_find_dai_link(). We don't need to use _safe loop. Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_add_dai_link() might return error, we need to check it. Signed-off-by:
-
Kuninori Morimoto authored
soc-core has many for_each_xxx, but it is a little bit difficult to know which list is relead to which for_each_xxx. This patch adds missing comment for it. Signed-off-by:
-
Kuninori Morimoto authored
To be more safety code, let's set NULL to component->debugfs_root when it was cleanuped. Signed-off-by:
-
Daniel Baluta authored
For i.MX7ULP and i.MX8MQ register map is changed. Add two new compatbile strings to differentiate this. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20190806151214.6783-6-daniel.baluta@nxp.comSigned-off-by:
-
Pierre-Louis Bossart authored
The addition of a kernel module parameter to optionally disable MSI had the side effect of permanently disabling it. The return value of pci_alloc_irq_vectors() is the number of allocated vectors or a negative number on error, so testing with the ! operator is not quite right. It was one optimization too far. Restore previous behavior to use MSI by default, unless the user selects not to do so or the allocation of irq_vectors fails. Fixes: 672ff5e3 ('ASoC: SOF: Intel: hda: add a parameter to disable MSI') Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806170603.10815-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Shuming Fan authored
The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.comSigned-off-by:
-
Shuming Fan authored
- The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data Signed-off-by:
-
- 05 Aug, 2019 28 commits
-
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, the code nested deeply, and it makes code difficult to read, and is not good for encapsulation. We want to implement component related function at soc-component.c, but, some of them need to care whole snd_soc_pcm_runtime (= rtd) connected component. Let's call component related function which need to care with for_each_rtdcom() loop as snd_soc_pcm_component_xxx(). This patch adds new snd_soc_pcm_component_pcm_free() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, the code nested deeply, and it makes code difficult to read, and is not good for encapsulation. We want to implement component related function at soc-component.c, but, some of them need to care whole snd_soc_pcm_runtime (= rtd) connected component. Let's call component related function which need to care with for_each_rtdcom() loop as snd_soc_pcm_component_xxx(). This patch adds new snd_soc_pcm_component_pcm() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, the code nested deeply, and it makes code difficult to read, and is not good for encapsulation. We want to implement component related function at soc-component.c, but, some of them need to care whole snd_soc_pcm_runtime (= rtd) connected component. Let's call component related function which need to care with for_each_rtdcom() loop as snd_soc_pcm_component_xxx(). This patch adds new snd_soc_pcm_component_mmap() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, the code nested deeply, and it makes code difficult to read, and is not good for encapsulation. We want to implement component related function at soc-component.c, but, some of them need to care whole snd_soc_pcm_runtime (= rtd) connected component. Let's call component related function which need to care with for_each_rtdcom() loop as snd_soc_pcm_component_xxx(). This patch adds new snd_soc_pcm_component_page() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, the code nested deeply, and it makes code difficult to read, and is not good for encapsulation. We want to implement component related function at soc-component.c, but, some of them need to care whole snd_soc_pcm_runtime (= rtd) connected component. Let's call component related function which need to care with for_each_rtdcom() loop as snd_soc_pcm_component_xxx(). This patch adds new snd_soc_pcm_component_copy_user() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, the code nested deeply, and it makes code difficult to read, and is not good for encapsulation. We want to implement component related function at soc-component.c, but, some of them need to care whole snd_soc_pcm_runtime (= rtd) connected component. Let's call component related function which need to care with for_each_rtdcom() loop as snd_soc_pcm_component_xxx(). This patch adds new snd_soc_pcm_component_ioctrl() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, the code nested deeply, and it makes code difficult to read, and is not good for encapsulation. We want to implement component related function at soc-component.c, but, some of them need to care whole snd_soc_pcm_runtime (= rtd) connected component. Let's call component related function which need to care with for_each_rtdcom() loop as snd_soc_pcm_component_xxx(). This patch adds new snd_soc_pcm_component_pointer() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current soc-dapm / soc-core are using a long way round to call .set_bias_level. if (driver->set_bias_level) dapm->set_bias_level = ...; ... if (dapm->set_bias_level) ret = dapm->set_bias_level(...); We can directly call it via driver->set_bias_level. One note here is that both Card and Component have dapm, but, Card's dapm doesn't have dapm->component. We need to check it. This patch moves snd_soc_component_set_bias_level() to soc-component.c and updates parameters. dapm->set_bias_level is no longer needed Signed-off-by:
-
Kuninori Morimoto authored
Current soc-dapm / soc-core are using a long way round to call .stream_event. if (driver->stream_event) dapm->stream_event = ...; ... if (dapm->stream_event) ret = dapm->stream_event(...); We can directly call it via driver->stream_event. One note here is that both Card and Component have dapm, but, Card's dapm doesn't have dapm->component. We need to check it. This patch moves snd_soc_component_stream_event() to soc-component.c and updates parameters. dapm->stream_event is no longer needed Signed-off-by:
-
Kuninori Morimoto authored
Current soc-dapm / soc-core are using a long way round to call .seq_notifier. if (driver->seq_notifier) dapm->seq_notifier = ...; ... if (dapm->seq_notifier) ret = dapm->seq_notifier(...); We can directly call it via driver->seq_notifier. One note here is that both Card and Component have dapm, but, Card's dapm doesn't have dapm->component. We need to check it. This patch moves snd_soc_component_seq_notifier() to soc-component.c, and updates parameters. dapm->seq_notifier is no longer needed Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_of_xlate_dai_name() and use it Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_of_xlate_dai_id() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_remove() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_probe() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->xxx, But, it is not good for encapsulation. This patch adds new snd_soc_component_is_suspended() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_resume() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_suspend() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_trigger() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_hw_free() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_hw_params() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_prepare() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_close() and use it. Signed-off-by:
-
Kuninori Morimoto authored
Current ALSA SoC is directly using component->driver->ops->xxx, thus, it is deep nested, and makes code difficult to read, and is not good for encapsulation. This patch adds new snd_soc_component_open() and use it. Signed-off-by:
-
Kuninori Morimoto authored
ALSA SoC is calling try_module_get()/module_put() based on component->driver->module_get_upon_open. To keep simple and readable code, we should create its function. This patch adds new snd_soc_component_get/put(). Signed-off-by:
-
Kuninori Morimoto authored
ALSA SoC has many snd_soc_component_xxx(), but these are randomly located in many files. Because of it, code is difficult to read. This patch creates new soc-component.c, and moves existing snd_soc_component_xxx() into it. But not yet fully. We need more cleanup it. Signed-off-by:
-
Kuninori Morimoto authored
No ALSA SoC driver has .fill_silence at component->driver->ops. We can revive it if some-driver want to use it, but let's remove it so far to avoid maintaining complex code Signed-off-by:
-
Kuninori Morimoto authored
No ALSA SoC driver has .copy_kernel at component->driver->ops. We can revive it if some-driver want to use it, but let's remove it so far to avoid maintaining complex code Signed-off-by:
-
Kuninori Morimoto authored
No ALSA SoC driver has .ack at component->driver->ops. We can revive it if some-driver want to use it, but let's remove it so far to avoid maintaining complex code Signed-off-by:
-
- 02 Aug, 2019 1 commit
-
-
Stephen Boyd authored
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-50-swboyd@chromium.orgSigned-off-by:
-
- 01 Aug, 2019 1 commit
-
-
Colin Ian King authored
The value assigned to ts_width is never read on the error return path so the assignment is redundant and can be removed. Remove it. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190731223234.16153-1-colin.king@canonical.comSigned-off-by:
-
