Use the new set_pXd()/set_pte() helper functions at all places where
page table entries are modified.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Add set_pte_bit()/clear_pte_bit() and set_pXd_bit()/clear_pXd_bit
helper functions which are supposed to be used if bits within
ptes/pXds are set/cleared.
The only point of these helper functions is to get more readable
code. This is quite similar to what arm64 has.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Add set_pXd()/set_pte() helper functions which must be used to update
page table entries. The new helpers use WRITE_ONCE() to make sure that
a page table entry is written to only once.

Without this the compiler could otherwise generate code which writes
several times to a page table entry when updating its contents from
invalid to valid, which could lead to surprising results especially
for multithreaded processes...
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Remove __s390_indirect_jump_r13use_r14 expoline thunk unused since
commit fbbdfca5 ("s390/entry.S: factor out SIEEXIT macro").
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Finally use epsw to create a complete psw mask within pt_regs. Without
this only some bits are correct, while other bits are (incorrectly)
always zero.

The epsw instruction is quite heavy weight, however given that this
only effects ftrace_regs_caller this seems to be the right thing, so
we finally get a complete psw mask for ftrace kprobed functions.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Remove opencoded offsetof and use offsetof instead.
The generated code is identical before/after this change.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

With commit 57892847 ("s390/smp: reallocate IPL CPU lowcore")
virtual addresses are wrongly passed to memblock_free_late() and
SPX instructions on IPL CPU reinitialization.

Note: this does not fix a bug currently, since virtual and
physical addresses are identical.

Fixes: 57892847 ("s390/smp: reallocate IPL CPU lowcore")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This patch switches the sysfs attribute /sys/bus/ap/scans
from read-only to read-write. If there is something written
to this attribute, an AP bus rescan is forced. If an AP
bus scan is triggered this way a debug feature entry line
reports this in /sys/kernel/debug/s390dbf/ap/sprintf.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jakob Naucke <naucke@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This patch introduces an extension to the ap bus to notify device drivers
when the host AP configuration changes - i.e., adapters, domains or
control domains are added or removed. When an adapter or domain is added to
the host's AP configuration, the AP bus will create the associated queue
devices in the linux sysfs device model. Each new type 10 (i.e., CEX4) or
newer queue device with an APQN that is not reserved for the default device
driver will get bound to the vfio_ap device driver. Likewise, whan an
adapter or domain is removed from the host's AP configuration, the AP bus
will remove the associated queue devices from the sysfs device model. Each
of the queues that is bound to the vfio_ap device driver will get unbound.

With the introduction of hot plug support, binding or unbinding of a
queue device will result in plugging or unplugging one or more queues from
a guest that is using the queue. If there are multiple changes to the
host's AP configuration, it could result in the probe and remove callbacks
getting invoked multiple times. Each time queues are plugged into or
unplugged from a guest, the guest's VCPUs must be taken out of SIE.
If this occurs multiple times due to changes in the host's AP
configuration, that can have an undesirable negative affect on the guest's
performance.

To alleviate this problem, this patch introduces two new callbacks: one to
notify the vfio_ap device driver when the AP bus scan routine detects a
change to the host's AP configuration; and, one to notify the driver when
the AP bus is done scanning. This will allow the vfio_ap driver to do
bulk processing of all affected adapters, domains and control domains for
affected guests rather than plugging or unplugging them one at a time when
the probe or remove callback is invoked. The two new callbacks are:

void (*on_config_changed)(struct ap_config_info *new_config_info,
                          struct ap_config_info *old_config_info);

This callback is invoked at the start of the AP bus scan
function when it determines that the host AP configuration information
has changed since the previous scan. This is done by storing
an old and current QCI info struct and comparing them. If there is any
difference, the callback is invoked.

void (*on_scan_complete)(struct ap_config_info *new_config_info,
                         struct ap_config_info *old_config_info);

The on_scan_complete callback is invoked after the ap bus scan is
completed if the host AP configuration data has changed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Introduces a new driver callback to prevent a root user from re-assigning
the APQN of a queue that is in use by a non-default host device driver to
a default host device driver and vice versa. The callback will be invoked
whenever a change to the AP bus's sysfs apmask or aqmask attributes would
result in one or more APQNs being re-assigned. If the callback responds
in the affirmative for any driver queried, the change to the apmask or
aqmask will be rejected with a device busy error.

For this patch, only non-default drivers will be queried. Currently,
there is only one non-default driver, the vfio_ap device driver. The
vfio_ap device driver facilitates pass-through of an AP queue to a
guest. The idea here is that a guest may be administered by a different
sysadmin than the host and we don't want AP resources to unexpectedly
disappear from a guest's AP configuration (i.e., adapters and domains
assigned to the matrix mdev). This will enforce the proper procedure for
removing AP resources intended for guest usage which is to
first unassign them from the matrix mdev, then unbind them from the
vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Running kprobe test on a kernel built with clang 14 didn't actually
trigger pgm_pre_handler() and no unwinder code was called. Even though
do_report_trap() is a global symbol, clang inlined it in several local
functions including illegal_op() handler, so that kprobbing a global
symbol didn't have a desired effect.

To achieve the same test result (unwinding from a program check
handler) introduce a local function and probe an instruction in the
middle, so that kprobe doesn't take KPROBE_ON_FTRACE path.

While at it, add another test for KPROBE_ON_FTRACE.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

By default no backtraces are printed when a test succeeds, but sometimes
it is useful to spot issues automated test doesn't cover. Add "backtrace"
module parameter to force it.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

- make current_test static
- use current_test consistently
- add TEST_WITH_FLAGS macro to contract parametrized tests definition
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

-mpacked-stack option has been supported by both minimum
gcc and clang versions for a while. With commit e2bc3e91
("scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0
for s390") minimum clang version now also supports a combination
of flags -mpacked-stack -mbackchain -pg -mfentry and fulfills
all requirements to always enable the packed stack layout.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This helps to avoid several merge conflicts later.

* fixes:
  s390/extable: fix exception table sorting
  s390/ftrace: fix arch_ftrace_get_regs implementation
  s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
  s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE
  s390/cio: verify the driver availability for path_event call
  s390/module: fix building test_modules_helpers.o with clang
  MAINTAINERS: downgrade myself to Reviewer for s390
  MAINTAINERS: add Alexander Gordeev as maintainer for s390
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390 has a swap_ex_entry_fixup function, however it is not being used
since common code expects a swap_ex_entry_fixup define. If it is not
defined the default implementation will be used. So fix this by adding
a proper define.
However also the implementation of the function must be fixed, since a
NULL value for handler has a special meaning and must not be adjusted.

Luckily all of this doesn't fix a real bug currently: the main extable
is correctly sorted during build time, and for runtime sorting there
is currently no case where the handler field is not NULL.

Fixes: 05a68e89 ("s390/kernel: expand exception table logic to allow new handling options")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

arch_ftrace_get_regs is supposed to return a struct pt_regs pointer
only if the pt_regs structure contains all register contents, which
means it must have been populated when created via ftrace_regs_caller.

If it was populated via ftrace_caller the contents are not complete
(the psw mask part is missing), and therefore a NULL pointer needs be
returned.

The current code incorrectly always returns a struct pt_regs pointer.

Fix this by adding another pt_regs flag which indicates if the
contents are complete, and fix arch_ftrace_get_regs accordingly.

Fixes: 89497968 ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

ftrace_caller was used for both ftrace_caller and ftrace_regs_caller,
which means that the target address of the hotpatch trampoline was
never updated.

With commit 89497968 ("s390/ftrace: provide separate
ftrace_caller/ftrace_regs_caller implementations") a separate
ftrace_regs_caller entry point was implemeted, however it was
forgotten to implement the necessary changes for ftrace_modify_call
and ftrace_make_call, where the branch target has to be modified
accordingly.

Therefore add the missing code now.

Fixes: 89497968 ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

We need to preserve the values at OLDMEM_BASE and OLDMEM_SIZE which are
used by zgetdump in case when kdump crashes. In that case zgetdump will
attempt to read OLDMEM_BASE and OLDMEM_SIZE in order to find out where
the memory range [0 - OLDMEM_SIZE] belonging to the production kernel is.

Fixes: f1a54694 ("s390/setup: don't reserve memory that occupied decompressor's head")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Use CRST_ALLOC_ORDER to make it more obvious what the order means,
and also to be consistent with other code, e.g. the vmemmap code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

There is a confusion with regard to the source address of
memcpy_real() and calling functions. While the declared
type for a source assumes a virtual address, in fact it
always called with physical address of the source.

This confusion led to bugs in copy_oldmem_kernel() and
copy_oldmem_user() functions, where __pa() macro applied
mistakenly to physical addresses. It does not lead to a
real issue, since virtual and physical addresses are
currently the same.

Fix both the bugs and memcpy_real() prototype by making
type of source address consistent to the function name
and the way it actually used.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Virtual addresses of vmcore_info and os_info members are
wrongly passed to copy_oldmem_kernel(), while the function
expects physical address of the source. Instead, __pa()
macro should have been applied.

Yet, use of __pa() macro could be somehow confusing, since
copy_oldmem_kernel() may treat the source as an offset, not
as a direct physical address (that depens from the oldmem
availability and location).

Fix the virtual vs physical address confusion and make the
way the old lowcore is read consistent across all sources.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call.

Fixes: 32ef9388 ("s390/cio: Add support for FCES status notification")
Cc: stable@vger.kernel.org
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

It is quite pointless to use memcpy to copy two bytes, besides that
this construct will also partially remove type and size sanity checks.

Therefore simply use an assignment.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Due to historical reasons os_info handling functions misuse
the notion of physical vs virtual addresses difference.

Note: this does not fix a bug currently, since virtual
and physical addresses are identical.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Due to historical reasons sclp_sdias_copy() misuses
the notion of physical vs virtual addresses difference.

Note: this does not fix a bug currently, since virtual
and physical addresses are identical.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Due to historical reasons memcpy_absolute() and friend functions
misuse the notion of physical vs virtual addresses difference.

Note: this does not fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

commit 72b3942a ("scripts: ftrace - move the
sort-processing in ftrace_init") had the unexpected
side effect that wrong code locations were patched.
To prevent this from happening again, verify the
opcode before patching it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Remove my old invalid email address which can be found in a couple of
files. Instead of updating it, just remove my contact data completely
from source files.
We have git and other tools which allow to figure out who is responsible
for what with recent contact data.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This patch adds s390dbf logging to the function that executes the
PQAP(AQIC) instruction on behalf of the guest to which the queue for which
interrupts are being enabled or disabled is attached.

Currently, the vfio_ap_irq_enable function sets status response code 06
(notification indicator byte address (nib) invalid) in the status word
when the vfio_pin_pages function - called to pin the page containing the
nib - returns an error or a different number of pages pinned than
requested.

Setting the response code returned to userspace without also logging a
message in the kernel makes it impossible to determine whether the response
was due to an error detected by the vfio_ap device driver or because the
response code was returned by the firmware in response to the PQAP(AQIC)
instruction.

In addition to logging a warning for the situation above, this patch adds
the following:

* A function to validate the nib address invoked prior to calling the
  vfio_pin_pages function. This allows for logging a message informing
  the reader of the reason the page containing the nib can not be pinned
  if the nib address is not valid. Response code 06 (invalid nib address)
  will be set in the status word returned to the guest from the
  instruction.

* Checks the return value from the kvm_s390_gisc_register and logs a
  message informing the reader of the failure. Status response code 08
  (invalid gisa) will be set in the status word returned to the guest from
  the PQAP(AQIC) instruction.

* Checks the status response code returned from execution of the PQAP(AQIC)
  instruction and if it indicates an error, logs a message informing the
  reader.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This patch adds s390dbf logging to the function that handles interception
of the PQAP(AQIC) instruction. Several items of data are validated before
ultimately calling the functions that execute the PQAP(AQIC) instruction on
behalf of the guest to which the queue for which interrupts are being
enabled or disabled is attached.

Currently, the handle_pqap function sets status response code 01 (queue not
available) in the status word that is normally returned from the
PQAP(AQIC) instruction under the following conditions:

* Set when the function pointer to the handler is not set in the
  kvm_s390_crypto object (i.e., the PQAP hook is not registered).

* Set when the KVM pointer is not set in the ap_matrix_mdev object
  (i.e., the matrix mdev is not passed through to a guest).

* Set when the queue for which interrupts are being enabled or
  disabled is either not bound to the vfio_ap device driver or not assigned
  to the matrix mdev.

Setting the response code returned to userspace without also logging a
message in the kernel makes it impossible to determine whether the response
was due to an error detected by the vfio_ap device driver or because the
response code was returned by the firmware in response to the PQAP(AQIC)
instruction, so this patch logs a message to the s390dbf log for the
vfio_ap device driver for each of the situations described above.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Changed the MAINTAINERS file to include the new
drivers/s390/crypto/vfio_ap_debug.h file path.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Sets up an s390dbf debug log for the vfio_ap device driver for logging
events occurring during the lifetime of the driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Move test_modules_return_* prototypes into a header file in order to
placate -Wmissing-prototypes.

Fixes: 90c53187 ("s390/module: test loading modules with a lot of relocations")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Now that Alexander Gordeev has volunteered to be a co-maintainer for
s390, I can act as a reviewer instead of being a maintainer for s390.
With Alexander, Heiko, and Vasily we are in really good shape.
I will continue to act as the maintainer for KVM on s390 together with
Janosch.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Change Alexander Gordeev's status so he is maintainer
instead of reviewer for s390.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Pull ext4 fixes from Ted Ts'o:
 "Various bug fixes for ext4 fast commit and inline data handling.

  Also fix regression introduced as part of moving to the new mount API"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  fs/ext4: fix comments mentioning i_mutex
  ext4: fix incorrect type issue during replay_del_range
  jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
  ext4: fix potential NULL pointer dereference in ext4_fill_super()
  jbd2: refactor wait logic for transaction updates into a common function
  jbd2: cleanup unused functions declarations from jbd2.h
  ext4: fix error handling in ext4_fc_record_modified_inode()
  ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
  ext4: fix error handling in ext4_restore_inline_data()
  ext4: fast commit may miss file actions
  ext4: fast commit may not fallback for ineligible commit
  ext4: modify the logic of ext4_mb_new_blocks_simple
  ext4: prevent used blocks from being allocated during fast commit replay