- 25 Nov, 2022 23 commits
-
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
This reverts commit 22ca9f4a because CFI no longer breaks cross-module function address equality, so crypto_shash_alg_has_setkey() can now be an inline function like before. This commit should not be backported to kernels that don't have the new CFI implementation. Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
The arm architecture doesn't support CFI yet, and even if it did, the new CFI implementation supports indirect calls to assembly functions. Therefore, there's no need to use a wrapper function for nh_neon(). Acked-by:
-
Eric Biggers authored
sm3_neon_transform() is called via indirect function calls. Therefore it needs to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause its type hash to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure (if the compiler didn't happen to optimize out the indirect call). Fixes: c50d3285 ("arm64: Add types to indirect called assembly functions") Acked-by:
-
Eric Biggers authored
Since the CFI implementation now supports indirect calls to assembly functions, take advantage of that rather than use a wrapper function. Acked-by:
-
Eric Biggers authored
sm4_aesni_avx_ctr_enc_blk8(), sm4_aesni_avx_cbc_dec_blk8(), sm4_aesni_avx_cfb_dec_blk8(), sm4_aesni_avx2_ctr_enc_blk16(), sm4_aesni_avx2_cbc_dec_blk16(), and sm4_aesni_avx2_cfb_dec_blk16() are called via indirect function calls. Therefore they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure. (Or at least that should be the case. For some reason the CFI checks in sm4_avx_cbc_decrypt(), sm4_avx_cfb_decrypt(), and sm4_avx_ctr_crypt() are not always being generated, using current tip-of-tree clang. Anyway, this patch is a good idea anyway.) Fixes: ccace936 ("x86: Add types to indirectly called assembly functions") Signed-off-by:
-
Eric Biggers authored
sm3_transform_avx() is called via indirect function calls. Therefore it needs to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause its type hash to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure (if the compiler didn't happen to optimize out the indirect call). Fixes: ccace936 ("x86: Add types to indirectly called assembly functions") Acked-by:
-
Eric Biggers authored
sha512_transform_ssse3(), sha512_transform_avx(), and sha512_transform_rorx() are called via indirect function calls. Therefore they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure (if the compiler didn't happen to optimize out the indirect calls). Fixes: ccace936 ("x86: Add types to indirectly called assembly functions") Acked-by:
-
Eric Biggers authored
sha256_transform_ssse3(), sha256_transform_avx(), sha256_transform_rorx(), and sha256_ni_transform() are called via indirect function calls. Therefore they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure (if the compiler didn't happen to optimize out the indirect calls). Fixes: ccace936 ("x86: Add types to indirectly called assembly functions") Acked-by:
-
Eric Biggers authored
sha1_transform_ssse3(), sha1_transform_avx(), and sha1_ni_transform() (but not sha1_transform_avx2()) are called via indirect function calls. Therefore they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure (if the compiler didn't happen to optimize out the indirect calls). Fixes: ccace936 ("x86: Add types to indirectly called assembly functions") Acked-by:
-
Eric Biggers authored
Since the CFI implementation now supports indirect calls to assembly functions, take advantage of that rather than use wrapper functions. Acked-by:
-
Eric Biggers authored
aria_aesni_avx_encrypt_16way(), aria_aesni_avx_decrypt_16way(), aria_aesni_avx_ctr_crypt_16way(), aria_aesni_avx_gfni_encrypt_16way(), aria_aesni_avx_gfni_decrypt_16way(), and aria_aesni_avx_gfni_ctr_crypt_16way() are called via indirect function calls. Therefore they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure. Fixes: ccace936 ("x86: Add types to indirectly called assembly functions") Acked-by:
-
Eric Biggers authored
crypto_aegis128_aesni_enc(), crypto_aegis128_aesni_enc_tail(), crypto_aegis128_aesni_dec(), and crypto_aegis128_aesni_dec_tail() are called via indirect function calls. Therefore they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure (if the compiler didn't happen to optimize out the indirect calls). Fixes: ccace936 ("x86: Add types to indirectly called assembly functions") Acked-by:
-
Daniel Jordan authored
list_for_each_entry_reverse() assumes that the iterated list is nonempty and that every list_head is embedded in the same type, but its use in padata_do_serial() breaks both rules. This doesn't cause any issues now because padata_priv and padata_list happen to have their list fields at the same offset, but we really shouldn't be relying on that. Fixes: bfde23ce ("padata: unbind parallel jobs from specific CPUs") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by:
-
Daniel Jordan authored
A deadlock can happen when an overloaded system runs ->parallel() in the context of the current task: padata_do_parallel ->parallel() pcrypt_aead_enc/dec padata_do_serial spin_lock(&reorder->lock) // BHs still enabled <interrupt> ... __do_softirq ... padata_do_serial spin_lock(&reorder->lock) It's a bug for BHs to be on in _do_serial as Steffen points out, so ensure they're off in the "current task" case like they are in padata_parallel_worker to avoid this situation. Reported-by: syzbot+bc05445bc14148d51915@syzkaller.appspotmail.com Fixes: 4611ce22 ("padata: allocate work structures for parallel jobs from a pool") Signed-off-by:Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Zhang Yiqun authored
In the past, the data for mb-skcipher test has been allocated twice, that means the first allcated memory area is without free, which may cause a potential memory leakage. So this patch is to remove one allocation to fix this error. Fixes: e161c593 ("crypto: tcrypt - add multibuf skcipher...") Signed-off-by:
Zhang Yiqun <zhangyiqun@phytium.com.cn> Signed-off-by:
-
Eric Biggers authored
When CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is set, the code in algboss.c that handles CRYPTO_MSG_ALG_REGISTER is unnecessary, so make it be compiled out. Signed-off-by:
-
Eric Biggers authored
Make the kdf_sp800108 self-test only print a message on success when fips_enabled, so that it's consistent with testmgr.c and doesn't spam the kernel log with a message that isn't really important. Signed-off-by:
-
Eric Biggers authored
Make kdf_sp800108 honor the CONFIG_CRYPTO_MANAGER_DISABLE_TESTS kconfig option, so that it doesn't always waste time running its self-test. Signed-off-by:
-
Eric Biggers authored
The crypto_boot_test_finished static key is unnecessary when self-tests are disabled in the kconfig, so optimize it out accordingly, along with the entirety of crypto_start_tests(). This mainly avoids the overhead of an unnecessary static_branch_enable() on every boot. Signed-off-by:
-
Eric Biggers authored
Since algboss always skips testing of algorithms with the CRYPTO_ALG_INTERNAL flag, there is no need to go through the dance of creating the test kthread, which creates a lot of overhead. Instead, we can just directly finish the algorithm registration, like is now done when self-tests are disabled entirely. Signed-off-by:
-
Eric Biggers authored
Currently, registering an algorithm with the crypto API always causes a notification to be posted to the "cryptomgr", which then creates a kthread to self-test the algorithm. However, if self-tests are disabled in the kconfig (as is the default option), then this kthread just notifies waiters that the algorithm has been tested, then exits. This causes a significant amount of overhead, especially in the kthread creation and destruction, which is not necessary at all. For example, in a quick test I found that booting a "minimum" x86_64 kernel with all the crypto options enabled (except for the self-tests) takes about 400ms until PID 1 can start. Of that, a full 13ms is spent just doing this pointless dance, involving a kthread being created, run, and destroyed over 200 times. That's over 3% of the entire kernel start time. Fix this by just skipping the creation of the test larval and the posting of the registration notification entirely, when self-tests are disabled. Signed-off-by:
-
Herbert Xu authored
Merge branch 'i2c/client_device_id_helper-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Merge i2c tree to pick up i2c_client_get_device_id helper.
-
- 22 Nov, 2022 1 commit
-
-
Uwe Kleine-König authored
ccree_init() calls cc_debugfs_global_fini(), the former is an init function and the latter an exit function though. A modular build emits: WARNING: modpost: drivers/crypto/ccree/ccree.o: section mismatch in reference: init_module (section: .init.text) -> cc_debugfs_global_fini (section: .exit.text) (with CONFIG_DEBUG_SECTION_MISMATCH=y). Fixes: 4f1c596d ("crypto: ccree - Remove debugfs when platform_driver_register failed") Signed-off-by:
-
- 18 Nov, 2022 13 commits
-
-
Wenkai Lin authored
Fix that put two or more continuous blank lines inside function. Signed-off-by:
Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by:
Kai Ye <yekai13@huawei.com> Signed-off-by:
-
Kai Ye authored
There are a couple of spelling mistakes in sec2. Fix them. Signed-off-by:
-
Kai Ye authored
Reduce the function complexity by use the function table in the process of dumping queue. The function input parameters are unified. And maintainability is enhanced. Signed-off-by:
-
Kai Ye authored
Considering that the qm feature and debugfs feature are independent. The code related to debugfs is getting larger and larger. It should be separate as a debugfs file. So move some debugfs code to new file from qm file. The qm code logic is not modified. And maintainability is enhanced. Signed-off-by:
-
Kai Ye authored
The last register logic and different register logic are combined. Use "u32" instead of 'int' in the regs function input parameter to simplify some checks. Signed-off-by:
-
Kai Ye authored
There is no security data in the pointer. It is only a value transferred as a structure. It makes no sense to zero a variable that is on the stack. So not need to set the pointer to null. Signed-off-by:
-
Herbert Xu authored
Some sync algorithms may require a large amount of temporary space during its operations. There is no reason why they should be limited just because some legacy users want to place all temporary data on the stack. Such algorithms can now set a flag to indicate that they need extra request context, which will cause them to be invisible to users that go through the sync_skcipher interface. Signed-off-by: -
Xiongfeng Wang authored
pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before q_num_set() returns. Fixes: c8b4b477 ("crypto: hisilicon - add HiSilicon HPRE accelerator") Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by:
Weili Qian <qianweili@huawei.com> Signed-off-by:
-
Herbert Xu authored
cryptd is buggy as it tries to use sync_skcipher without going through the proper sync_skcipher interface. In fact it doesn't even need sync_skcipher since it's already a proper skcipher and can easily access the request context instead of using something off the stack. Fixes: 36b3875a ("crypto: cryptd - Remove VLA usage of skcipher") Signed-off-by:
-
Tianjia Zhang authored
The cpu feature defined by MODULE_DEVICE_TABLE is only referenced when compiling as a module, and the warning of unused variable will be encountered when compiling with intree. The warning can be removed by adding the __maybe_unused flag. Fixes: 03c9a333 ("crypto: arm64/ghash - add NEON accelerated fallback for 64-bit PMULL") Fixes: ae1b83c7 ("crypto: arm64/sm4 - add CE implementation for GCM mode") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
Gaosheng Cui authored
When platform_driver_register failed, we need to remove debugfs, which will caused a resource leak, fix it. Failed logs as follows: [ 32.606488] debugfs: Directory 'ccree' with parent '/' already present! Fixes: 4c3f9727 ("crypto: ccree - introduce CryptoCell driver") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Tomas Marek authored
Use a more meaningful name for the readl return value variable. Link: https://lore.kernel.org/all/Y1J3QwynPFIlfrIv@loth.rohan.me.apana.org.au/Signed-off-by:
Tomas Marek <tomas.marek@elrest.cz> Signed-off-by:
-
Jason A. Donenfeld authored
Most hw_random devices return entropy which is assumed to be of full quality, but driver authors don't bother setting the quality knob. Some hw_random devices return less than full quality entropy, and then driver authors set the quality knob. Therefore, the entropy crediting should be opt-out rather than opt-in per-driver, to reflect the actual reality on the ground. For example, the two Raspberry Pi RNG drivers produce full entropy randomness, and both EDK2 and U-Boot's drivers for these treat them as such. The result is that EFI then uses these numbers and passes the to Linux, and Linux credits them as boot, thereby initializing the RNG. Yet, in Linux, the quality knob was never set to anything, and so on the chance that Linux is booted without EFI, nothing is ever credited. That's annoying. The same pattern appears to repeat itself throughout various drivers. In fact, very very few drivers have bothered setting quality=1024. Looking at the git history of existing drivers and corresponding mailing list discussion, this conclusion tracks. There's been a decent amount of discussion about drivers that set quality < 1024 -- somebody read and interepreted a datasheet, or made some back of the envelope calculation somehow. But there's been very little, if any, discussion about most drivers where the quality is just set to 1024 or unset (or set to 1000 when the authors misunderstood the API and assumed it was base-10 rather than base-2); in both cases the intent was fairly clear of, "this is a hardware random device; it's fine." So let's invert this logic. A hw_random struct's quality knob now controls the maximum quality a driver can produce, or 0 to specify 1024. Then, the module-wide switch called "default_quality" is changed to represent the maximum quality of any driver. By default it's 1024, and the quality of any particular driver is then given by: min(default_quality, rng->quality ?: 1024); This way, the user can still turn this off for weird reasons (and we can replace whatever driver-specific disabling hacks existed in the past), yet we get proper crediting for relevant RNGs. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
- 14 Nov, 2022 1 commit
-
-
Angel Iglesias authored
Introduces new helper function to aid in .probe_new() refactors. In order to use existing i2c_get_device_id() on the probe callback, the device match table needs to be accessible in that function, which would require bigger refactors in some drivers using the deprecated .probe callback. This issue was discussed in more detail in the IIO mailing list. Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/Suggested-by:
Nuno Sá <noname.nuno@gmail.com> Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org>
-
- 11 Nov, 2022 2 commits
-
-
Shashank Gupta authored
The ADF_STATUS_PF_RUNNING bit is set after the successful initialization of the communication between VF to PF in adf_vf2pf_notify_init(). So, it is not required to be set after the execution of the function adf_dev_init(). Signed-off-by:
Shashank Gupta <shashank.gupta@intel.com> Reviewed-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by:
Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by:
-
Yang Li authored
There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. ./drivers/crypto/rockchip/rk3288_crypto.c:351:2-9: line 351 is redundant because platform_get_irq() already prints an error Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2677Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
