- 10 Oct, 2008 1 commit
-
-
Randy Dunlap authored
The sbpcd tester program is not included in the kernel source tree, so remove the reference to it. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Reported-by:
Nick Warne <nick@ukfsn.org> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
- 09 Oct, 2008 39 commits
-
-
Randy Dunlap authored
Fix kernel-doc in new functions: Error(mmotm-2008-1002-1617//fs/block_dev.c:895): duplicate section name 'Description' Error(mmotm-2008-1002-1617//fs/block_dev.c:924): duplicate section name 'Description' Warning(mmotm-2008-1002-1617//fs/block_dev.c:1282): No description found for parameter 'pathname' Signed-off-by:
-
Jens Axboe authored
Signed-off-by: -
Denis ChengRq authored
Since all bio_split calls refer the same single bio_split_pool, the bio_split function can use bio_split_pool directly instead of the mempool_t parameter; then the mempool_t parameter can be removed from bio_split param list, and bio_split_pool is only referred in fs/bio.c file, can be marked static. Signed-off-by:
Denis ChengRq <crquan@gmail.com> Signed-off-by:
-
Martin K. Petersen authored
Helper function to find the sector offset in a bio given bvec index and page offset. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
This is a wrapper for accessing a gendisk's integrity bits. It allows the integrity support in MD to be compiled with BLK_DEV_INTEGRITY off. Signed-off-by:
-
Martin K. Petersen authored
The DM and MD integrity support now depends on being able to use gendisks instead of block_devices when comparing integrity profiles. Change function parameters accordingly. Also update comparison logic so that two NULL profiles are a valid configuration. Signed-off-by:
-
Martin K. Petersen authored
- kobject_del already puts the parent. - Set integrity profile to NULL to prevent stale data. Signed-off-by:
-
Martin K. Petersen authored
A filesystem might supply its own integrity metadata. Introduce a flag that indicates whether the filesystem or the block layer owns the integrity buffer. Signed-off-by:
-
Jens Axboe authored
We need bdev_get_integrity() to support the pending md/dm patches. Signed-off-by: -
Alberto Bertogli authored
The whole bio_integrity() definition is inside an #ifdef CONFIG_BLK_DEV_INTEGRITY, there's no need for the conditional code. Signed-off-by:
Alberto Bertogli <albertito@blitiri.com.ar> Signed-off-by:
-
Kiyoshi Ueda authored
This patch removes end_queued_request() and end_dequeued_request(), which are no longer used. As a results, users of __end_request() became only end_request(). So the actual code in __end_request() is moved to end_request() and __end_request() is removed. Signed-off-by:
Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Kiyoshi Ueda authored
This patch converts elevator to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' arguments is converted to 'error'. Signed-off-by: -
Kiyoshi Ueda authored
This patch converts gdrom to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. gd.transfer is '1' in error cases and '0' in non-error cases, so gdrom hasn't been propagating any error code to the block layer. We can just convert error cases to '-EIO'. Signed-off-by: -
Kiyoshi Ueda authored
This patch converts memstick to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Signed-off-by: -
Kiyoshi Ueda authored
This patch converts virtio_blk to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' argument is converted to 'error'. Signed-off-by: -
Jens Axboe authored
Define as 32, which is is what BDEVNAME_SIZE is/was as well. This keeps the user interface the same and gets rid of the difference between kernel and user api here. Signed-off-by: -
Kiyoshi Ueda authored
This patch adds an new interface, blk_lld_busy(), to check lld's busy state from the block layer. blk_lld_busy() calls down into low-level drivers for the checking if the drivers set q->lld_busy_fn() using blk_queue_lld_busy(). This resolves a performance problem on request stacking devices below. Some drivers like scsi mid layer stop dispatching request when they detect busy state on its low-level device like host/target/device. It allows other requests to stay in the I/O scheduler's queue for a chance of merging. Request stacking drivers like request-based dm should follow the same logic. However, there is no generic interface for the stacked device to check if the underlying device(s) are busy. If the request stacking driver dispatches and submits requests to the busy underlying device, the requests will stay in the underlying device's queue without a chance of merging. This causes performance problem on burst I/O load. With this patch, busy state of the underlying device is exported via q->lld_busy_fn(). So the request stacking driver can check it and stop dispatching requests if busy. The underlying device driver must return the busy state appropriately: 1: when the device driver can't process requests immediately. 0: when the device driver can process requests immediately, including abnormal situations where the device driver needs to kill all requests. Signed-off-by: -
Elias Oltmanns authored
blk_start_queueing() should act like the generic queue unplugging and kicking and ignore a stopped queue. Such a queue may not be run until after a call to blk_start_queue(). Signed-off-by:
Elias Oltmanns <eo@nebensachen.de> Signed-off-by:
-
Sven Schuetz authored
This header file is of interest for user space programming, i.e. for tools that process blktrace data. We would like to use it for a tool on-top of blktrace which processes data provided by blktrace. For this purpose, it would be helpful if the blktrace API would make it to /usr/include/linux. The git tree for the blktrace tools comes with its own copy of this header file. I didn't manage to replace that copy with the file generated by the patch below yet. A few more cleanups would be needed. For example, the blktrace ioctl numbers, which are currently defined in usr/include/fs.h, might need to be moved. Should be feasible, though. Signed-off-by:
Sven Schuetz <sven@linux.vnet.ibm.com> Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Signed-off-by:
-
Jens Axboe authored
By only allowing async IO to consume 3/4 ths of the tag depth, we always have slots free to serve sync IO. This is important to avoid having writes fill the entire tag queue, thus starving reads. Original patch and idea from Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: -
Jens Axboe authored
We really need to know about the hardware tagging support as well, since if the SSD does not do tagging then we still want to idle. Otherwise have the same dependent sync IO vs flooding async IO problem as on rotational media. Signed-off-by: -
Jens Axboe authored
SSD devices should give an RPM setting of 1 in word 217 of the ID page. If we see such a device, tell the block layer about it. Signed-off-by: -
Jens Axboe authored
We don't want to idle in AS/CFQ if the device doesn't have a seek penalty. So add a QUEUE_FLAG_NONROT to indicate a non-rotational device, low level drivers should set this flag upon discovery of an SSD or similar device type. Signed-off-by: -
Keith Wansbrough authored
The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by:
Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: <mike.miller@hp.com> Signed-off-by:
-
scameron@beardog.cca.cpqcorp.net authored
Fix cciss SCSI rescan code to better notice device changes. If you hot-unplug a tape drive, then hot-plug a different tape drive into the same slot in a storage enclosure, the cciss driver wouldn't notice anything had changed, as it was only looking at the LUN address and device type. Now it looks at the inquiry page 0x83 device identifier, and vendor and model strings as well. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by:
-
FUJITA Tomonori authored
This example isn't the proper way to handle scatterlists (can't handle sg chaining). Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
Kiyoshi Ueda authored
This patch adds a queue flag to indicate the block device can be used for request stacking. Request stacking drivers need to stack their devices on top of only devices of which q->request_fn is functional. Since bio stacking drivers (e.g. md, loop) basically initialize their queue using blk_alloc_queue() and don't set q->request_fn, the check of (q->request_fn == NULL) looks enough for that purpose. However, dm will become both types of stacking driver (bio-based and request-based). And dm will always set q->request_fn even if the dm device is bio-based of which q->request_fn is not functional actually. So we need something else to distinguish the type of the device. Adding a queue flag is a solution for that. The reason why dm always sets q->request_fn is to keep the compatibility of dm user-space tools. Currently, all dm user-space tools are using bio-based dm without specifying the type of the dm device they use. To use request-based dm without changing such tools, the kernel must decide the type of the dm device automatically. The automatic type decision can't be done at the device creation time and needs to be deferred until such tools load a mapping table, since the actual type is decided by dm target type included in the mapping table. So a dm device has to be initialized using blk_init_queue() so that we can load either type of table. Then, all queue stuffs are set (e.g. q->request_fn) and we have no element to distinguish that it is bio-based or request-based, even after a table is loaded and the type of the device is decided. By the way, some stuffs of the queue (e.g. request_list, elevator) are needless when the dm device is used as bio-based. But the memory size is not so large (about 20[KB] per queue on ia64), so I hope the memory loss can be acceptable for bio-based dm users. Signed-off-by:
-
Kiyoshi Ueda authored
This patch adds blk_insert_cloned_request(), a generic request submission interface for request stacking drivers. Request-based dm will use it to submit their clones to underlying devices. blk_rq_check_limits() is also added because it is possible that the lower queue has stronger limitations than the upper queue if multiple drivers are stacking at request-level. Not only for blk_insert_cloned_request()'s internal use, the function will be used by request-based dm when the queue limitation is modified (e.g. by replacing dm's table). Signed-off-by:
-
Kiyoshi Ueda authored
This patch adds blk_update_request(), which updates struct request with completing its data part, but doesn't complete the struct request itself. Though it looks like end_that_request_first() of older kernels, blk_update_request() should be used only by request stacking drivers. Request-based dm will use it in bio->bi_end_io callback to update the original request when a data part of a cloned request completes. Followings are additional background information of why request-based dm needs this interface. - Request stacking drivers can't use blk_end_request() directly from the lower driver's completion context (bio->bi_end_io or rq->end_io), because some device drivers (e.g. ide) may try to complete their request with queue lock held, and it may cause deadlock. See below for detailed description of possible deadlock: <http://marc.info/?l=linux-kernel&m=120311479108569&w=2> - To solve that, request-based dm offloads the completion of cloned struct request to softirq context (i.e. using blk_complete_request() from rq->end_io). - Though it is possible to use the same solution from bio->bi_end_io, it will delay the notification of bio completion to the original submitter. Also, it will cause inefficient partial completion, because the lower driver can't perform the cloned request anymore and request-based dm needs to requeue and redispatch it to the lower driver again later. That's not good. - So request-based dm needs blk_update_request() to perform the bio completion in the lower driver's completion context, which is more efficient. Signed-off-by: -
Jens Axboe authored
When a driver calls blk_cleanup_queue(), the device should be fully idle. However, the block layer may have pending plugging timers and the IO schedulers may have pending work in the work queues. So quisce the device by waiting for the timer and flushing the work queues. Signed-off-by: -
Chris Lalancette authored
Until recently, the maximum number of xvd block devices you could attach to a Xen domU was 16. This limitation turned out to be problematic for some users, so it was expanded to handle a much larger number of disks. However, this requires a couple of changes in the way that blkfront scans for disks. This functionality is already present in the Xen linux-2.6.18-xen.hg tree; the attached patch adds this functionality to the mainline xen-blkfront implementation. I successfully tested it on a 2.6.25 tree, and build tested it on 2.6.27-rc3. Signed-off-by:
Chris Lalancette <clalance@redhat.com> Acked-by:
Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Jens Axboe authored
Don't put functions that are only used in fs/bio-integrity.c in blkdev.h, it's much cleaner to just keep it in there. Also kill completely unused bdev_get_tag_size() Signed-off-by: -
Jens Axboe authored
We cannot abort a request if we raced with the timeout handler already, or with the IO completion. So make blk_abort_request() mark the request as complete, and only continue if we succeeded. Found and suggested by Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: -
Jens Axboe authored
Only works for the generic request timer handling. Allows one to sporadically ignore request completions, thus exercising the timeout handling. Signed-off-by: -
Jens Axboe authored
Not all callers need (or want!) the mempool backing guarentee, it essentially means that you can only use bio_alloc() for short allocations and not for preallocating some bio's at setup or init time. So add bio_kmalloc() which does the same thing as bio_alloc(), except it just uses kmalloc() as the backing instead of the bio mempools. Signed-off-by: -
Hugh Dickins authored
Two mods to blkdev_issue_discard(), thinking ahead to its use on swap: 1. Add gfp_mask argument, so swap allocation can use it where GFP_KERNEL might deadlock but GFP_NOIO is safe. 2. Enlarge nr_sects argument from unsigned to sector_t: unsigned long is enough to cover a whole swap area, but sector_t suits any partition. Change sb_issue_discard()'s nr_blocks to sector_t too; but no need seen for a gfp_mask there, just pass GFP_KERNEL down to blkdev_issue_discard(). Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
FUJITA Tomonori authored
blk_rq_unmap_user in sg_finish_rem_req can take care of all the cases. Signed-off-by:
-
FUJITA Tomonori authored
sg_read_xfer was used to copy data to user space for READ commands. blk_rq_unmap_user does the job so sg_read_xfer does nothing useful. Signed-off-by:
-
