- 18 Jan, 2018 4 commits
-
-
Peter Rosin authored
Without such a range, gpiolib fails with -EPROBE_DEFER, pending the addition of the range. So, without a range, gpiolib will keep deferring indefinitely. Cc: stable@vger.kernel.org Fixes: 9e80f906 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver") Fixes: e10f72bf ("gpio: gpiolib: Generalise state persistence beyond sleep") Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Peter Rosin authored
Various gpiolib activity depend on the pinctrl to be up and kicking. Therefore, register the pinctrl before adding a gpiochip. Cc: stable@vger.kernel.org Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Peter Rosin authored
There is no matching call to pinctrl_unregister, so switch to the managed devm_pinctrl_register to clean up properly when done. Cc: stable@vger.kernel.org Fixes: 9e80f906 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 16 Jan, 2018 3 commits
-
-
Markus Elfring authored
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 11 Jan, 2018 7 commits
-
-
Sean Wang authored
Make consistent error handling of all mtk_hw_get_value occurrences using propagating error code from the internal instead of creating a new one. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Sean Wang authored
commit d6ed9355 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") leads to the following static checker warning: drivers/pinctrl/mediatek/pinctrl-mt7622.c:1419 mtk_gpio_get() error: uninitialized symbol 'value'. 1412 static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio) 1413 { 1414 struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent); 1415 int value; 1416 1417 mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value); ^^^^^^^^^^^^^^^^ 1418 1419 return !!value; 1420 } The appropriate error handling must be added to avoid the potential error caused by uninitialized value being returned. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
There is code duplication between uniphier_conf_pin_drive_get() and uniphier_conf_pin_drive_set(). Factor out the common code into uniphier_conf_get_drvctrl_data(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Stefan Agner authored
The decode parameters are constant mark them const. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Stefan Agner authored
Now that imx_pinctrl_probe accepts const struct imx_pinctrl_soc_info we can constify all declarations of struct imx_pinctrl_soc_info. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Stefan Agner authored
Using of_device_get_match_data in imx7d_pinctrl_probe simplifies the function. Also get rid of the void pointer cast since imx_pinctrl_probe now accepts const struct imx_pinctrl_soc_info. Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Stefan Agner authored
For some SoCs the struct imx_pinctrl_soc_info is passed through of_device_id.data which is const. Most variables are already const or otherwise not written. However, some fields are modified at runtime. Move those fields to the dynamically allocated struct imx_pinctrl. Fixes: b3060044 ("pinctrl: freescale: imx7d: make of_device_ids const") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 10 Jan, 2018 1 commit
-
-
hao_zhang authored
Pin function can not be match correctly when SUNXI_PIN describe with mutiple variant and same function. such as: on pinctrl-sun4i-a10.c SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION_VARIANT(0x2, "pwm", /* PWM0 */ PINCTRL_SUN4I_A10 | PINCTRL_SUN7I_A20), SUNXI_FUNCTION_VARIANT(0x3, "pwm", /* PWM0 */ PINCTRL_SUN8I_R40)), it would always match to the first variant function (PINCTRL_SUN4I_A10, PINCTRL_SUN7I_A20) so we should add variant compare on it. Signed-off-by: hao_zhang <hao5781286@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 09 Jan, 2018 5 commits
-
-
Khan, Imran authored
Add initial pinctrl driver to support pin configuration with pinctrl framework for msm8998. Signed-off-by: Imran Khan <kimran@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> [bjorn: Consolidated function groups] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
* Print a line break together with other data in a single function call. * Adjust indentation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Bai Ping authored
On i.MX 6ULL, the BOOT_MODEx and TAMPERx pin MUX and CTRL registers are available in a separate IOMUXC_SNVS module. Add support for the IOMUXC_SNVS module to the i.MX 6UL pinctrl driver. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Alexandre Belloni authored
The Microsemi Ocelot SoC has a few pins that can be used as GPIOs or take multiple other functions. Add a driver for the pinmuxing and the GPIOs. There is currently no support for interrupts. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
desc->mux_setting is set to NULL in pin_free() called just below. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 08 Jan, 2018 6 commits
-
-
Linus Walleij authored
Merge tag 'sh-pfc-for-v4.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.16 (take two) - Add PWM pin groups on various R-Car Gen2 and RZ/G1 SoCs, - Add missing I2C5 pin groups on R-Car E2 and RZ/G1E, - Add SATA pin groups on R-Car H3 ES2.0.
-
Julia Lawall authored
The data field of an of_device_id structure has type const void *, so there is no need for a const-discarding cast when putting const values into such a structure. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Julia Lawall authored
The return value of of_device_get_match_data has type const void *. The desc field of the pctl structure also has a const type, so there is no need for the const-discarding cast between them. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Julia Lawall authored
This driver creates a const structure that it stores in the data field of an of_device_id array. Adding const to the declaration of the location that receives the const value from the data field ensures that the compiler will continue to check that the value is not modified. Furthermore, the const-discarding cast on the extraction from the data field is no longer needed. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Hans de Goede authored
On some systems, some PCB traces attached to GpioInts are routed in such a way that they pick up enough interference to constantly (many times per second) trigger. Enabling glitch-filtering fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 03 Jan, 2018 14 commits
-
-
Markus Elfring authored
Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Krzysztof Kozlowski authored
Replace GPL license statements with SPDX GPL-2.0+ license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
pinctrl: utils: Delete an error message for a failed memory allocation in pinctrl_utils_add_map_configs() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. WARNING: void function return statements are not generally useful Thus remove such a statement in the affected function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Adjust words in these descriptions. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit extra messages for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-