- 17 Feb, 2012 7 commits
-
-
Takashi Iwai authored
It needs a few extra setups for EAPD, but others look fairly straightforward. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Clevo machines with ALC880 are all well with proper BIOS setup. It seems still requiring the additional COEF setup for the EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Refactor the DAC filling function to be used for both the primary line outputs and extra outputs using the individual badness tables. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
ALC880 model=lg could work fine with the auto-parser due to the recent rewrite, but it still needs the manual adjustment; namely, the BIOS leaves unused pins as some real active jacks. This confuses the parser. Thus we just cover these pins and override the pin-configs as a fix-up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Try harder to fit the multi-io pins also by checking the hard-wired connections for multi-ios. Also, the badness values are adjusted to prioritize the multi-ios as more valuable. These changes will enable the multi-io on some machines without losing the current capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 Feb, 2012 13 commits
-
-
Takashi Iwai authored
So far, the Realtek driver tires to assign the single-connected routes for all pins only once at the beginning. However, since some DACs have been already mapped, the rest pins might have also single conections. In this patch, the driver does the single-connection assignment in a loop until all possbile single-connections are checked. This will improve the DAC assignment, e.g. for ASUS G72. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This patch improves the Realtek auto-parser for assigning the DACs and mixers in more suitable ways by evaluating the assignment with "badness" calculations. When assigning a DAC hinders the assignment of individual DACs for other pins, some badness point is given. Similarly, when it blocks the assignment of unique mixer controls, another badness point is added. Also, if no DAC, even shared DAC, can be assigned, more badness is pointed. Finally, comparing the accumulated badness, the best route is chosen among several trials. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When the connections from the pin selector contain only two widgets, a route to DAC and the aa-mixer, it's certainly a single connection. In such a case, get_dac_if_single() should return the connected DAC, too. This will improve the detection of the individual DAC assignment for each pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The fix for bitmap-overflow in Realtek codec driver is needed for the further development of the auto-parser with badness evaluation.
-
Takashi Iwai authored
The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix missing volume controls with ALC260] is too narrow for some codecs, which may have more NIDs than 0x20, thus it may overflow the bitmap array on them. Just double the number to cover all and also add a sanity-check code to be safer. Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We've enabled the static fixups for ASUS machines with ALC269 codec, just for making things compatible during the transition to the auto- parser. However, it seems that the static configurations do more harmful than good, as some of entries don't match with the actual hardware setups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Now we can clean up all static quirks for ALC260. Also many codes in alc_quirks.c can be ripped off since they have been used only by ALC260 static quirks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The model works with the auto-parser as is, thus now good to drop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It's working with the auto-parser just with the standard GPIO 1 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1 per the jack state, in addition to the COEF setup used for other Acer laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The ALC260 model=acer needs GPIO1 setup. It could be selected well if the codec SSID is set properly by BIOS, but to make sure, enable it forcibly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Feb, 2012 1 commit
-
-
Xi Wang authored
A malicious USB device could feed in a large nr_rates value. This would cause the subsequent call to kmemdup() to allocate a smaller buffer than expected, leading to out-of-bounds access. This patch validates the nr_rates value and reuses the limit introduced in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow in parse_uac2_sample_rate_range()"). Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Feb, 2012 2 commits
-
-
Daniel T Chen authored
BugLink: https://bugs.launchpad.net/bugs/930842 The reporter states that audio is inaudible by default without muting 'External Amplifier'. Add a quirk to handle his SSID so that changing the control is not necessary. Reported-and-tested-by: Benjamin Carlson <elderbubba0810@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
A simple fix from Morimoto-san for the pointer() operation in the FSI driver.
-
- 13 Feb, 2012 8 commits
-
-
Takashi Iwai authored
Conflicts: sound/pci/hda/patch_realtek.c Merged back the fix for Acer Aspire 6935 with ALC889 codec. The fix commit was based on 3.2 kernel so that it can be applied to stable kernel cleanly.
-
Takashi Iwai authored
Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
VT1705 codec has two ADCs where the secondary ADC has no MUX but only a fixed connection to the mic pin. This confused the driver and it tries always overriding the input-source selection by assumption of the existing MUX for the secondary ADC, resulted in resetting the input-source at each time PM (including power-saving) occurs. The fix is simply to check the existence of MUX for secondary ADCs in the initialization code. Tested-by: Anisse Astier <anisse@astier.eu> Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add the jack-detect suppression for an ASUS machine with ALC892 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add a new flag to indicate that the codec has no jack-detection cap. This flag should be set for hardwares that have no jack-detect implementation although the codec chip itself supports it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It's a bit too big and used too often as an inline function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Necessary for working on the jack-detection suppression feature.
-
- 09 Feb, 2012 2 commits
-
-
Kuninori Morimoto authored
current fsi_pointer() calculation was not correct for FSI driver. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
The new HP laptops turns off the mute LED with VREF50 or VREF80, but not in HIZ unlike the previous models. Since VREF50 (also 80) works with the previous models, let's use VREF50 for all. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 08 Feb, 2012 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
A few small WM8994 updates to go on top of the previous lot of things that were sent. They collide with some -next work so I'd really like to get them into 3.3-rc3 if possible to merge back up into the -next code. All driver specific and unexciting in the grand scheme of things.
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The VMID ramp rate is supposed to be 0x3, not 11b. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
Clemens Ladisch authored
The driver accidentally exchanged the left/right fields for stereo AC'97 mixer registers. This affected only the aux and CD inputs because the line input bypasses the AC'97 codec and the mic input is mono; cards without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected. Reported-and-tested-by: Abby Cedar <abbycedar@yahoo.com.au> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.31+ <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Clemens Ladisch authored
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Seth Heasley authored
This patch adds the HD Audio DeviceIDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Feb, 2012 1 commit
-
-
Jaroslav Kysela authored
This hardware requires same fixup for the node 0x0f like Asus A6Rp. More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-