Leave that to actual ethernet/phy drivers.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14202/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Delete legacy hack for broken bootloaders. The warning has been in kernel
for several years, and if there are still users using such bootloaders,
they can fix the boot by supplying a proper DTB.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14201/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

In many of clk_disable() implementations, it is a no-op for a NULL
pointer input, but this is one of the exceptions.

Making it treewide consistent will allow clock consumers to call
clk_disable() without NULL pointer check.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-arm-kernel@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/14264/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch removes creating a fake pci device in MIPS early config
access and instead just uses the pci bus to get the same functionality.
The struct pci_dev is too large to allocate on the stack, and was relying
on compiler optimizations to remove its usage.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14253/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Replace the custom minimal clock implementation for Toshiba TXx9 by a
basic implementation using the Common Clock Framework.

The only clocks that are provided are those needed by TXx9-specific
drivers ("imbus" and "spi" (TX4938 only)), and their common parent
clock "gbus". Other clocks can be added when needed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14239/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

While the custom minimal TXx9 clock implementation doesn't need or use
clock (un)prepare calls (they are dummies if !CONFIG_HAVE_CLK_PREPARE),
they are mandatory when using the Common Clock Framework.

Hence add them, to prepare for the advent of CCF.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14238/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

txx9_gpio_init() calls gpiochip_add_data(), which fails with -ENOMEM as
it is called too early in the boot process. This causes all subsequent
GPIO operations to fail silently (before commit 54d77198 ("gpio:
bail out silently on NULL descriptors") it printed the error message
"gpiod_direction_output_raw: invalid GPIO" on RBTX49[23]7).

Postpone all GPIO setup to .arch_init() time to fix this.
Suggested-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linux-gpio@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14237/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

txx9_gpio_init() calls gpiochip_add_data(), which fails with -ENOMEM as
it is called too early in the boot process. This causes all subsequent
GPIO operations to fail silently.

Postpone all GPIO setup to .arch_init() time to fix this.
Suggested-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linux-gpio@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13967/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove unneeded variables and assignments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14260/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The patch adds RTC support for Loongson1C board, and enable the external
crystal when the RTC is first powered up.
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Cc: keguang.zhang@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14214/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

These files were only including module.h for exception table
related functions.  We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.

In the case of traps.c we can't dump the module.h include since it is
also used to provide "print_modules".
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13934/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The Kconfig currently controlling compilation of this code is:

arch/mips/lantiq/Kconfig:config XRX200_PHY_FW
arch/mips/lantiq/Kconfig:       bool "XRX200 PHY firmware loader"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

We don't replace module.h with init.h since the file doesn't need that.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13932/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The Makefile entry controlling compilation of this code is:

arch/mips/lantiq/xway/vmmc.o
   ---> arch/mips/lantiq/xway/Makefile:obj-y += vmmc.o

...meaning that it currently is not being built as a module by anyone.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We replace module.h with export.h since the file does actually use
EXPORT_SYMBOL.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13930/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The Makefile entry controlling compilation of this code is "obj-y"
meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

We don't replace module.h with init.h since the file already has that.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13931/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The Makefile entry controlling compilation of this code is "obj-y"
meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13933/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 7eb8c99d ("MIPS: Delete smp-gic.c") removed the file from the
Makefile and the option to build it from KConfig, but left the file
itself floating in the tree.

Remove the unused source file.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: paul.burton@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13883/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

According to commit 9f6b6877
("android: remove timed output/gpio driver")
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13904/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The field "owner" is set by the core.
Thus delete an unneeded initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: John Crispin <john@phrozen.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: kernel-janitors@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13929/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The addition of VPE information to /proc/cpuinfo used to be in smp-mt.c.
This file is not used by MIPS r6 kernels, so the Virtual Processor
information was not present for these CPU types.

Move the code to print VPE information into proc.c, add a case for MIPS
r6 CPUS, and remove the block from smp-mt.c.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13847/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Cc: keguang.zhang@gmail.com
Cc: chenhc@lemote.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13305/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Adds basic platform devices for Loongson1C, including serial port
and ethernet.
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Cc: keguang.zhang@gmail.com
Cc: chenhc@lemote.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13304/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Loongson1C is a 32-bit SoC designed by Loongson Technology Co., Ltd,
with many features similar to Loongson1B.
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Cc: paul.burton@imgtec.com
Cc: markos.chandras@imgtec.com
Cc: james.hogan@imgtec.com
Cc: kumba@gentoo.org
Cc: macro@imgtec.com
Cc: david.daney@cavium.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13303/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Rename upper case variables.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Sivasubramanian Palanisamy <sivasubramanian.palanisamy@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13352/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Take all memory into use by default, instead of limiting to 512 MB.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Sivasubramanian Palanisamy <sivasubramanian.palanisamy@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13353/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This adds a device tree example for SFR NeufBox 6.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13844/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

BCM6362 is a BMIPS4350 SoC which needs the same fixup as BCM6368 in order to
enable SMP support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13845/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This adds a device tree example for Netgear CVG834G.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13843/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

BCM3368 has a shared TLB which conflicts with current SMP support, so it must
be disabled for now.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13840/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This adds a device tree example for Comtrend VR-3032u, which
also serves as a real example for brcm,bcm6328-leds.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13842/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The prefix bcm9* should only be used for reference and evaluation boards from
Broadcom.
Also adds missing console output to bootargs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13841/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 380e4270 added support for bcm97435svmb.dtb but missed adding it to
DT_NONE.
Also refactor DT_NONE dtbs in order to add larger names in the future.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13839/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Only one defconfig has a STACKPROTECTOR value.  And it asks for
the strong variant, which isn't supported by older toolchains.

Due to the nature of MIPS having more platform specific code than say
x86, the allyesconfig and allmodconfig aren't as effective for build
coverage.  So, in addition, I like to use a trivial script to walk all
the defconfigs and build each one.

However I will get false positives on unsupported stackprotector values
with an older toolchain like gcc-4.6.3.  As in this instance I am just
using the compiler as a glorified syntax checker on a machine where I
build a bunch of other arch for the same reason, there is no real
motivation to get a newer toolchain for improved optimization etc.

Since there is only one of them, and there is nothing about these
settings that are board/platform specific, I propose we just eliminate
the existing instance and take the default.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: James Hartley <james.hartley@imgtec.com>
Cc: Ionela Voinescu <ionela.voinescu@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13846/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull ARM fixes from Russell King:
 "Three relatively small fixes for ARM:

   - Roger noticed that dma_max_pfn() was calculating the upper limit
     wrongly, by adding the PFN offset of memory twice.

   - A fix from Robin to correct parsing of MPIDR values when the
     address size is larger than one BE32 unit.

   - A fix from Srinivas to ensure that we do not rely on the boot
     loader (or previous Linux kernel) setting the translation table
     base register a certain way in the decompressor, which can lead to
     crashes"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
  ARM: 8617/1: dma: fix dma_max_pfn()
  ARM: 8616/1: dt: Respect property size when parsing CPUs

If the bootloader uses the long descriptor format and jumps to
kernel decompressor code, TTBCR may not be in a right state.
Before enabling the MMU, it is required to clear the TTBCR.PD0
field to use TTBR0 for translation table walks.

The commit dbece458 ("ARM: 7501/1: decompressor:
reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
doesn't consider all the bits for the size of TTBCR.N.

Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
indicate the use of TTBR0 and the correct base address width.

Fixes: dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull x86 fixes from Thomas Gleixner:
 "The last regression fixes for 4.8 final:

   - Two patches addressing the fallout of the CR4 optimizations which
     caused CR4-less machines to fail.

   - Fix the VDSO build on big endian machines

   - Take care of FPU initialization if no CPUID is available otherwise
     task struct size ends up being zero

   - Fix up context tracking in case load_gs_index fails"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Fix context tracking state warning when load_gs_index fails
  x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID
  x86/vdso: Fix building on big endian host
  x86/boot: Fix another __read_cr4() case on 486
  x86/init: Fix cr4_init_shadow() on CR4-less machines

Pull MIPS fixes from Ralf Baechle:
 "Another round of fixes:

   - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
   - CPS: Avoid BUG() when offlining pre-r6 CPUs
   - DEC: Avoid gas warnings due to suspicious instruction scheduling by
     manually expanding assembler macros.
   - FTLB: Fix configuration by moving confiuguratoin after probing
   - FTLB: clear execution hazard after changing FTLB enable
   - Highmem: Fix detection of unsupported highmem with cache aliases
   - I6400: Don't touch FTLBP chicken bits
   - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE
   - Malta: Fix IOCU disable switch read for MIPS64
   - Octeon: Fix probing of devices attached to GPIO lines
   - uprobes: Misc small fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
  MIPS: Fix detection of unsupported highmem with cache aliases
  MIPS: Malta: Fix IOCU disable switch read for MIPS64
  MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS
  MIPS: clear execution hazard after changing FTLB enable
  MIPS: Configure FTLB after probing TLB sizes from config4
  MIPS: Stop setting I6400 FTLBP
  MIPS: DEC: Avoid la pseudo-instruction in delay slots
  MIPS: Octeon: mark GPIO controller node not populated after IRQ init.
  MIPS: uprobes: fix use of uninitialised variable
  MIPS: uprobes: remove incorrect set_orig_insn
  MIPS: fix uretprobe implementation
  MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs

Pull sparc fixes from David Miller:

 1) Fix section mismatches in some builds, from Paul Gortmaker.

 2) Need to count huge zero page mappings when doing TSB sizing, from
    Mike Kravetz.

 3) Fix handing of cpu_possible_mask when nr_cpus module option is
    specified, from Atish Patra.

 4) Don't allocate irq stacks until nr_irqs has been processed, also
    from Atish Patra.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix non-SMP build.
  sparc64: Fix irq stack bootmem allocation.
  sparc64: Fix cpu_possible_mask if nr_cpus is set
  sparc64 mm: Fix more TSB sizing issues
  sparc64: fix section mismatch in find_numa_latencies_for_group

Pull networking fixes from David Miller:

 1) Fix wrong TCP checksums on MTU probing when checksum offloading is
    disabled, from Douglas Caetano dos Santos.

 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang.

 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(),
    fix from Lance Richardson.

 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6,
    fix from Nikolay Aleksandrov.

 5) Fix packet alignment in fec driver, from Eric Nelson.

 6) Fix perf regression in sctp due to struct layout and cache misses,
    from Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock
  sctp: change to check peer prsctp_capable when using prsctp polices
  sctp: remove prsctp_param from sctp_chunk
  sctp: move sent_count to the memory hole in sctp_chunk
  tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
  act_ife: Fix false encoding
  act_ife: Fix external mac header on encode
  VSOCK: Don't dec ack backlog twice for rejected connections
  Revert "net: ethernet: bcmgenet: use phydev from struct net_device"
  net: fec: align IP header in hardware
  net: fec: remove QUIRK_HAS_RACC from i.mx27
  net: fec: remove QUIRK_HAS_RACC from i.mx25
  ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
  ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
  tcp: fix a compile error in DBGUNDO()
  tcp: fix wrong checksum calculation on MTU probing
  sch_sfb: keep backlog updated with qlen
  sch_qfq: keep backlog updated with qlen
  can: dev: fix deadlock reported after bus-off

When discovering the number of VPEs per core, smp_num_siblings will be
incorrect for kernels built without support for the MIPS MultiThreading
(MT) ASE running on systems which implement said ASE. This leads to
accesses to VPEs in secondary cores being performed incorrectly since
mips_cm_vp_id calculates the wrong ID to write to the local "other"
registers. Fix this by examining the number of VPEs in the core as
reported by the CM.

This patch presumes that the number of VPEs will be the same in each
core of the system. As this path only applies to systems with CM version
2.5 or lower, and this property is true of all such known systems, this
is likely to be fine but is described in a comment for good measure.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14338/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>