- 16 May, 2022 36 commits
-
-
Qu Wenruo authored
Although we have btrfs_extent_buffer_leak_debug_check() (enabled by CONFIG_BTRFS_DEBUG option) to detect and warn QA testers that we have some extent buffer leakage, it's just pr_err(), not noisy enough for fstests to cache. So here we trigger a WARN_ON() if the allocated_ebs list is not empty. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Anand Jain authored
In the function btrfs_dev_replace_finishing, we dereferenced fs_info->fs_devices 6 times. Use keep local variable for that. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by:
Gabriel Niebler <gniebler@suse.com> Reviewed-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
This function can be simplified by refactoring to use the new iterator macro. No functional changes. Signed-off-by:
-
Gabriel Niebler authored
There is a common pattern when searching for a key in btrfs: * Call btrfs_search_slot to find the slot for the key * Enter an endless loop: * If the found slot is larger than the no. of items in the current leaf, check the next leaf * If it's still not found in the next leaf, terminate the loop * Otherwise do something with the found key * Increment the current slot and continue To reduce code duplication, we can replace this code pattern with an iterator macro, similar to the existing for_each_X macros found elsewhere in the kernel. This also makes the code easier to understand for newcomers by putting a name to the encapsulated functionality. Signed-off-by: -
Qu Wenruo authored
Since the subpage support for scrub, one page no longer always represents one sector, thus scrub_bio::pagev and scrub_bio::sector_count are no longer accurate. Rename them to scrub_bio::sectors and scrub_bio::sector_count respectively. This also involves scrub_ctx::pages_per_bio and other macros involved. Now the renaming of pages involved in scrub is be finished. Signed-off-by:
-
Qu Wenruo authored
Since the subpage support of scrub, scrub_sector is in fact just representing one sector. Thus the name scrub_page is no longer correct, rename it to scrub_sector. This also involves the following renames: - spage -> sector Normally we would just replace "page" with "sector" and result something like "ssector". But the repeating 's' is not really eye friendly. So here we just simple use "sector", as there is nothing from MM layer called "sector" to cause any confusion. - scrub_parity::spages -> sectors_list Normally we use plural to indicate an array, not a list. Rename it to @sectors_list to be more explicit on the list part. - Also reformat and update comments that get changed Signed-off-by:
-
Qu Wenruo authored
The following will be renamed in this patch: - scrub_block::pagev -> sectors - scrub_block::page_count -> sector_count - SCRUB_MAX_PAGES_PER_BLOCK -> SCRUB_MAX_SECTORS_PER_BLOCK - page_num -> sector_num to iterate scrub_block::sectors For now scrub_page is not yet renamed to keep the patch reasonable and it will be updated in a followup. Signed-off-by:
-
Filipe Manana authored
The function btrfs_read_buffer() is useless, it just calls btree_read_extent_buffer_pages() with exactly the same arguments. So remove it and rename btree_read_extent_buffer_pages() to btrfs_read_extent_buffer(), which is a shorter name, has the "btrfs_" prefix (since it's used outside disk-io.c) and the name is clear enough about what it does. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Filipe Manana authored
The comment at the top of read_block_for_search() is very outdated, as it refers to the blocking versus spinning path locking modes. We no longer have these two locking modes after we switched the btree locks from custom code to rw semaphores. So update the comment to stop referring to the blocking mode and put it more up to date. Reviewed-by:
-
Filipe Manana authored
When reading a btree node (or leaf), at read_block_for_search(), if we can't find its extent buffer in the cache (the fs_info->buffer_radix radix tree), then we unlock all upper level nodes before reading the btree node/leaf from disk, to prevent blocking other tasks for too long. However if we find that the extent buffer is in the cache but it is not up to date, we don't unlock upper level nodes before reading it from disk, potentially blocking other tasks on upper level nodes for too long. Fix this inconsistent behaviour by unlocking upper level nodes if we need to read a node/leaf from disk because its in-memory extent buffer is not up to date. If we unlocked upper level nodes then we must return -EAGAIN to the caller, just like the case where the extent buffer is not cached in memory. And like that case, we determine if upper level nodes are locked by checking only if the parent node is locked - if it isn't, then no other upper level nodes are locked. This is actually a rare case, as if we have an extent buffer in memory, it typically has the uptodate flag set and passes all the checks done by btrfs_buffer_uptodate(). Reviewed-by:
-
Filipe Manana authored
When reading a btree node, at read_block_for_search(), if we don't find the node's (or leaf) extent buffer in the cache, we will read it from disk. Since that requires waiting on IO, we release all upper level nodes from our path before reading the target node/leaf, and then return -EAGAIN to the caller, which will make the caller restart the while btree search. However we are causing the restart of btree search even for cases where it is not necessary: 1) We have a path with ->skip_locking set to true, typically when doing a search on a commit root, so we are never holding locks on any node; 2) We are doing a read search (the "ins_len" argument passed to btrfs_search_slot() is 0), or we are doing a search to modify an existing key (the "cow" argument passed to btrfs_search_slot() has a value of 1 and "ins_len" is 0), in which case we never hold locks for upper level nodes; 3) We are doing a search to insert or delete a key, in which case we may or may not have upper level nodes locked. That depends on the current minimum write lock levels at btrfs_search_slot(), if we had to split or merge parent nodes, if we had to COW upper level nodes and if we ever visited slot 0 of an upper level node. It's still common to not have upper level nodes locked, but our current node must be at least at level 1, for insertions, or at least at level 2 for deletions. In these cases when we have locks on upper level nodes, they are always write locks. These cases where we are not holding locks on upper level nodes far outweigh the cases where we are holding locks, so it's completely wasteful to retry the whole search when we have no upper nodes locked. So change the logic to not return -EAGAIN, and make the caller retry the search, when we don't have the parent node locked - when it's not locked it means no other upper level nodes are locked as well. Reviewed-by:
-
Omar Sandoval authored
btrfs_new_inode() inherits the inode flags from the parent directory and the mount options _after_ we fill the inode item. This works because all of the callers of btrfs_new_inode() make further changes to the inode and then call btrfs_update_inode(). It'd be better to fully initialize the inode once to avoid the extra update, so as a first step, set the inode flags _before_ filling the inode item. Reviewed-by:
Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Omar Sandoval authored
Every call of btrfs_new_inode() is immediately preceded by a call to btrfs_get_free_objectid(). Since getting an inode number is part of creating a new inode, this is better off being moved into btrfs_new_inode(). While we're here, get rid of the comment about reclaiming inode numbers, since we only did that when using the ino cache, which was removed by commit 5297199a ("btrfs: remove inode number cache feature"). Reviewed-by:
-
Omar Sandoval authored
For everything other than a subvolume root inode, we get the parent objectid from the parent directory. For the subvolume root inode, the parent objectid is the same as the inode's objectid. We can find this within btrfs_new_inode() instead of passing it. Reviewed-by:
-
Omar Sandoval authored
The passed dentry already contains the name. Reviewed-by:
-
Omar Sandoval authored
Commit 4a8b34af ("btrfs: handle ACLs on idmapped mounts") added this parameter but didn't use it. __btrfs_set_acl() is the low-level helper that writes an ACL to disk. The higher-level btrfs_set_acl() is the one that translates the ACL based on the user namespace. Reviewed-by:
-
Omar Sandoval authored
btrfs_new_inode() already returns an inode with nlink set to 1 (via inode_init_always()). Get rid of the unnecessary set. Reviewed-by:
-
Omar Sandoval authored
new_inode() always returns an inode with i_blocks and i_bytes set to 0 (via inode_init_always()). Remove the unnecessary call to inode_set_bytes() in btrfs_new_inode(). Reviewed-by:
-
Omar Sandoval authored
btrfs_new_inode() always returns an inode with i_size and disk_i_size set to 0 (via inode_init_always() and btrfs_alloc_inode(), respectively). Remove the unnecessary calls to btrfs_i_size_write() in btrfs_mkdir() and btrfs_create_subvol_root(). Reviewed-by:
-
Omar Sandoval authored
This is a trivial wrapper around btrfs_add_link(). The only thing it does other than moving arguments around is translating a > 0 return value to -EEXIST. As far as I can tell, btrfs_add_link() won't return > 0 (and if it did, the existing callsites in, e.g., btrfs_mkdir() would be broken). The check itself dates back to commit 2c90e5d6 ("Btrfs: still corruption hunting"), so it's probably left over from debugging. Let's just get rid of btrfs_add_nondir(). Reviewed-by:
-
Omar Sandoval authored
When btrfs_qgroup_inherit(), btrfs_alloc_tree_block, or btrfs_insert_root() fail in create_subvol(), we return without freeing anon_dev. Reorganize the error handling in create_subvol() to fix this. Reviewed-by:
-
Omar Sandoval authored
btrfs_rename() and btrfs_rename_exchange() don't account for enough items. Replace the incorrect explanations with a specific breakdown of the number of items and account them accurately. Note that this glosses over RENAME_WHITEOUT because the next commit is going to rework that, too. Reviewed-by:
-
Omar Sandoval authored
__btrfs_unlink_inode() calls btrfs_update_inode() on the parent directory in order to update its size and sequence number. Make sure we account for it. Reviewed-by:
-
Linus Torvalds authored
-
- 15 May, 2022 4 commits
-
-
Linus Torvalds authored
Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is one fix, and three documentation updates for 5.18-rc7. The fix is for the firmware loader which resolves a long-reported problem where the credentials of the firmware loader could be set to a userspace process without enough permissions to actually load the firmware image. Many Android vendors have been reporting this for quite some time. The documentation updates are for the embargoed-hardware-issues.rst file to add a new entry, change an existing one, and sort the list to make changes easier in the future. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation/process: Update ARM contact for embargoed hardware issues Documentation/process: Add embargoed HW contact for Ampere Computing Documentation/process: Make groups alphabetical and use tabs consistently firmware_loader: use kernel credentials when reading firmware
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are two small driver fixes for 5.18-rc7 that resolve reported problems: - slimbus driver irq bugfix - interconnect sync state bugfix Both of these have been in linux-next with no reported problems" * tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: slimbus: qcom: Fix IRQ check in qcom_slim_probe interconnect: Restore sync state by ignoring ipa-virt in provider count
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that resolve reported problems. They include: - n_gsm fixes for reported issues - 8250_mtk driver fixes for some platforms - fsl_lpuart driver fix for reported problem. - digicolor driver fix for reported problem. All have been in linux-next for a while with no reported problems" * tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fsl_lpuart: Don't enable interrupts too early tty: n_gsm: fix invalid gsmtty_write_room() result tty: n_gsm: fix mux activation issues in gsm_config() tty: n_gsm: fix buffer over-read in gsm_dlci_data() serial: 8250_mtk: Fix register address for XON/XOFF character serial: 8250_mtk: Make sure to select the right FEATURE_SEL serial: 8250_mtk: Fix UART_EFR register address tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small fixes for reported issues with some USB drivers. They include: - xhci fixes for xhci-mtk platform driver - typec driver fixes for reported problems. - cdc-wdm read-stuck fix - gadget driver fix for reported race condition - new usb-serial driver ids All of these have been in linux-next with no reported problems" * tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci-mtk: remove bandwidth budget table usb: xhci-mtk: fix fs isoc's transfer error usb: gadget: fix race when gadget driver register via ioctl usb: typec: tcpci_mt6360: Update for BMC PHY setting usb: gadget: uvc: allow for application to cleanly shutdown usb: typec: tcpci: Don't skip cleanup in .remove() on error usb: cdc-wdm: fix reading stuck on device close USB: serial: qcserial: add support for Sierra Wireless EM7590 USB: serial: option: add Fibocom MA510 modem USB: serial: option: add Fibocom L610 modem USB: serial: pl2303: add device id for HP LM930 Display
-
