1. 17 Apr, 2012 3 commits
  2. 06 Apr, 2012 5 commits
    • Jan Beulich's avatar
      xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success · f09d8432
      Jan Beulich authored
      The original XenoLinux code has always had things this way, and for
      compatibility reasons (in particular with a subsequent pciback
      adjustment) upstream Linux should behave the same way (allowing for two
      distinct error indications to be returned by the backend).
      Signed-off-by: default avatarJan Beulich <jbeulich@suse.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      f09d8432
    • Jan Beulich's avatar
      xen/pciback: fix XEN_PCI_OP_enable_msix result · 0ee46eca
      Jan Beulich authored
      Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a
      positive value to indicate the number of vectors (less than the amount
      requested) that can be set up for a given device. Returning this as an
      operation value (secondary result) is fine, but (primary) operation
      results are expected to be negative (error) or zero (success) according
      to the protocol. With the frontend fixed to match the XenoLinux
      behavior, the backend can now validly return zero (success) here,
      passing the upper limit on the number of vectors in op->value.
      Signed-off-by: default avatarJan Beulich <jbeulich@suse.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      0ee46eca
    • Srivatsa S. Bhat's avatar
      xen/smp: Remove unnecessary call to smp_processor_id() · e8c9e788
      Srivatsa S. Bhat authored
      There is an extra and unnecessary call to smp_processor_id()
      in cpu_bringup(). Remove it.
      Signed-off-by: default avatarSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      e8c9e788
    • Konrad Rzeszutek Wilk's avatar
      xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' · 2531d64b
      Konrad Rzeszutek Wilk authored
      The above mentioned patch checks the IOAPIC and if it contains
      -1, then it unmaps said IOAPIC. But under Xen we get this:
      
      BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
      IP: [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0
      PGD 0
      Oops: 0002 [#1] SMP
      CPU 0
      Modules linked in:
      
      Pid: 1, comm: swapper/0 Not tainted 3.2.10-3.fc16.x86_64 #1 Dell Inc. Inspiron
      1525                  /0U990C
      RIP: e030:[<ffffffff8134e51f>]  [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0
      RSP: e02b: ffff8800d42cbb70  EFLAGS: 00010202
      RAX: 0000000000000000 RBX: 00000000ffffffef RCX: 0000000000000001
      RDX: 0000000000000040 RSI: 00000000ffffffef RDI: 0000000000000001
      RBP: ffff8800d42cbb80 R08: ffff8800d6400000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffef
      R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000010
      FS:  0000000000000000(0000) GS:ffff8800df5fe000(0000) knlGS:0000000000000000
      CS:  e033 DS: 0000 ES: 0000 CR0:000000008005003b
      CR2: 0000000000000040 CR3: 0000000001a05000 CR4: 0000000000002660
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
      Process swapper/0 (pid: 1, threadinfo ffff8800d42ca000, task ffff8800d42d0000)
      Stack:
       00000000ffffffef 0000000000000010 ffff8800d42cbbe0 ffffffff8134f157
       ffffffff8100a9b2 ffffffff8182ffd1 00000000000000a0 00000000829e7384
       0000000000000002 0000000000000010 00000000ffffffff 0000000000000000
      Call Trace:
       [<ffffffff8134f157>] xen_bind_pirq_gsi_to_irq+0x87/0x230
       [<ffffffff8100a9b2>] ? check_events+0x12+0x20
       [<ffffffff814bab42>] xen_register_pirq+0x82/0xe0
       [<ffffffff814bac1a>] xen_register_gsi.part.2+0x4a/0xd0
       [<ffffffff814bacc0>] acpi_register_gsi_xen+0x20/0x30
       [<ffffffff8103036f>] acpi_register_gsi+0xf/0x20
       [<ffffffff8131abdb>] acpi_pci_irq_enable+0x12e/0x202
       [<ffffffff814bc849>] pcibios_enable_device+0x39/0x40
       [<ffffffff812dc7ab>] do_pci_enable_device+0x4b/0x70
       [<ffffffff812dc878>] __pci_enable_device_flags+0xa8/0xf0
       [<ffffffff812dc8d3>] pci_enable_device+0x13/0x20
      
      The reason we are dying is b/c the call acpi_get_override_irq() is used,
      which returns the polarity and trigger for the IRQs. That function calls
      mp_find_ioapics to get the 'struct ioapic' structure - which along with the
      mp_irq[x] is used to figure out the default values and the polarity/trigger
      overrides. Since the mp_find_ioapics now returns -1 [b/c the IOAPIC is filled
      with 0xffffffff], the acpi_get_override_irq() stops trying to lookup in the
      mp_irq[x] the proper INT_SRV_OVR and we can't install the SCI interrupt.
      
      The proper fix for this is going in v3.5 and adds an x86_io_apic_ops
      struct so that platforms can override it. But for v3.4 lets carry this
      work-around. This patch does that by providing a slightly different variant
      of the fake IOAPIC entries.
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      2531d64b
    • Igor Mammedov's avatar
      xen: only check xen_platform_pci_unplug if hvm · e95ae5a4
      Igor Mammedov authored
      commit b9136d207f08
        xen: initialize platform-pci even if xen_emul_unplug=never
      
      breaks blkfront/netfront by not loading them because of
      xen_platform_pci_unplug=0 and it is never set for PV guest.
      Signed-off-by: default avatarAndrew Jones <drjones@redhat.com>
      Signed-off-by: default avatarIgor Mammedov <imammedo@redhat.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      e95ae5a4
  3. 24 Mar, 2012 1 commit
    • Konrad Rzeszutek Wilk's avatar
      xen/acpi: Fix Kconfig dependency on CPU_FREQ · df7a3ee2
      Konrad Rzeszutek Wilk authored
      The functions: "acpi_processor_*" sound like they depend on CONFIG_ACPI_PROCESSOR
      but in reality they are exposed when CONFIG_CPU_FREQ=[y|m]. As such
      update the Kconfig to have this dependency and fix compile issues:
      
      ERROR: "acpi_processor_unregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
      ERROR: "acpi_processor_notify_smm" [drivers/xen/xen-acpi-processor.ko] undefined!
      ERROR: "acpi_processor_register_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
      ERROR: "acpi_processor_preregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
      
      Note: We still need the CONFIG_ACPI
      Reported-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      df7a3ee2
  4. 22 Mar, 2012 2 commits
    • Igor Mammedov's avatar
      xen: initialize platform-pci even if xen_emul_unplug=never · b9136d20
      Igor Mammedov authored
      When xen_emul_unplug=never is specified on kernel command line
      reading files from /sys/hypervisor is broken (returns -EBUSY).
      It is caused by xen_bus dependency on platform-pci and
      platform-pci isn't initialized when xen_emul_unplug=never is
      specified.
      
      Fix it by allowing platform-pci to ignore xen_emul_unplug=never,
      and do not intialize xen_[blk|net]front instead.
      Signed-off-by: default avatarIgor Mammedov <imammedo@redhat.com>
      Acked-by: default avatarStefano Stabellini <stefano.stabellini@eu.citrix.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      b9136d20
    • Konrad Rzeszutek Wilk's avatar
      xen/smp: Fix bringup bug in AP code. · 106b4438
      Konrad Rzeszutek Wilk authored
      The CPU hotplug code has now a callback to help bring up the CPU.
      Without the call we end up getting:
      
       BUG: soft lockup - CPU#0 stuck for 29s! [migration/0:6]
      Modules linked in:
      CPU ] Pid: 6, comm: migration/0 Not tainted 3.3.0upstream-01180-ged378a52 #1 Dell Inc. PowerEdge T105 /0RR825
      RIP: e030:[<ffffffff810d3b8b>]  [<ffffffff810d3b8b>] stop_machine_cpu_stop+0x7b/0xf0
      RSP: e02b:ffff8800ceaabdb0  EFLAGS: 00000293
      .. snip..
      Call Trace:
       [<ffffffff810d3b10>] ? stop_one_cpu_nowait+0x50/0x50
       [<ffffffff810d3841>] cpu_stopper_thread+0xf1/0x1c0
       [<ffffffff815a9776>] ? __schedule+0x3c6/0x760
       [<ffffffff815aa749>] ? _raw_spin_unlock_irqrestore+0x19/0x30
       [<ffffffff810d3750>] ? res_counter_charge+0x150/0x150
       [<ffffffff8108dc76>] kthread+0x96/0xa0
       [<ffffffff815b27e4>] kernel_thread_helper+0x4/0x10
       [<ffffffff815aacbc>] ? retint_restore_ar
      
      Thix fixes it.
      Acked-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      106b4438
  5. 21 Mar, 2012 1 commit
    • Konrad Rzeszutek Wilk's avatar
      xen/acpi: Remove the WARN's as they just create noise. · 27257fc0
      Konrad Rzeszutek Wilk authored
      When booting the kernel under machines that do not have P-states
      we would end up with:
      
      ------------[ cut here ]------------
       WARNING: at drivers/xen/xen-acpi-processor.c:504
       xen_acpi_processor_init+0x286/0
       x2e0()
       Hardware name: ProLiant BL460c G6
       Modules linked in:
       Pid: 1, comm: swapper Not tainted 2.6.39-200.0.3.el5uek #1
       Call Trace:
        [<ffffffff8191d056>] ? xen_acpi_processor_init+0x286/0x2e0
        [<ffffffff81068300>] warn_slowpath_common+0x90/0xc0
        [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0
        [<ffffffff8106834a>] warn_slowpath_null+0x1a/0x20
        [<ffffffff8191d056>] xen_acpi_processor_init+0x286/0x2e0
        [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0
        [<ffffffff81002168>] do_one_initcall+0xe8/0x130
      
      .. snip..
      
      Which is OK - the machines do not have P-states, so we fail to register
      to process the _PXX states. But there is no need to WARN the user
      of it.
      
      Oracle BZ# 13871288
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      27257fc0
  6. 20 Mar, 2012 5 commits
  7. 16 Mar, 2012 1 commit
  8. 14 Mar, 2012 2 commits
    • Konrad Rzeszutek Wilk's avatar
      xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. · 59a56802
      Konrad Rzeszutek Wilk authored
      This driver solves three problems:
       1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the
           hypervisor - aka P-states (cpufreq data).
       2). Upload the the Cx state information (cpuidle data).
       3). Inhibit CPU frequency scaling drivers from loading.
      
      The reason for wanting to solve 1) and 2) is such that the Xen hypervisor
      is the only one that knows the CPU usage of different guests and can
      make the proper decision of when to put CPUs and packages in proper states.
      Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it
      needs help from the initial domain to provide this information. The reason
      for 3) is that we do not want the initial domain to change P-states while the
      hypervisor is doing it as well - it causes rather some funny cases of P-states
      transitions.
      
      For this to work, the driver parses the Power Management data and uploads said
      information to the Xen hypervisor. It also calls acpi_processor_notify_smm()
      to inhibit the other CPU frequency scaling drivers from being loaded.
      
      Everything revolves around the 'struct acpi_processor' structure which
      gets updated during the bootup cycle in different stages. At the startup, when
      the ACPI parser starts, the C-state information is processed (processor_idle)
      and saved in said structure as 'power' element. Later on, the CPU frequency
      scaling driver (powernow-k8 or acpi_cpufreq), would call the the
      acpi_processor_* (processor_perflib functions) to parse P-states information
      and populate in the said structure the 'performance' element.
      
      Since we do not want the CPU frequency scaling drivers from loading
      we have to call the acpi_processor_* functions to parse the P-states and
      call "acpi_processor_notify_smm" to stop them from loading.
      
      There is also one oddity in this driver which is that under Xen, the
      physical online CPU count can be different from the virtual online CPU count.
      Meaning that the macros 'for_[online|possible]_cpu' would process only
      up to virtual online CPU count. We on the other hand want to process
      the full amount of physical CPUs. For that, the driver checks if the ACPI IDs
      count is different from the APIC ID count - which can happen if the user
      choose to use dom0_max_vcpu argument. In such a case a backup of the PM
      structure is used and uploaded to the hypervisor.
      
      [v1-v2: Initial RFC implementations that were posted]
      [v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
      [v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
      [v5: Cleaned up the driver, fix bug under Athlon XP]
      [v6: Changed the driver to a CPU frequency governor]
      [v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver
           made me rework it as driver that inhibits cpufreq scaling driver]
      [v8: Per Jan's review comments, fixed up the driver]
      [v9: Allow to continue even if acpi_processor_preregister_perf.. fails]
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      59a56802
    • Jan Beulich's avatar
      xen: constify all instances of "struct attribute_group" · ead1d014
      Jan Beulich authored
      The functions these get passed to have been taking pointers to const
      since at least 2.6.16.
      Signed-off-by: default avatarJan Beulich <jbeulich@suse.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      ead1d014
  9. 13 Mar, 2012 5 commits
  10. 10 Mar, 2012 2 commits
    • Konrad Rzeszutek Wilk's avatar
      xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. · 73c154c6
      Konrad Rzeszutek Wilk authored
      For the hypervisor to take advantage of the MWAIT support it needs
      to extract from the ACPI _CST the register address. But the
      hypervisor does not have the support to parse DSDT so it relies on
      the initial domain (dom0) to parse the ACPI Power Management information
      and push it up to the hypervisor. The pushing of the data is done
      by the processor_harveset_xen module which parses the information that
      the ACPI parser has graciously exposed in 'struct acpi_processor'.
      
      For the ACPI parser to also expose the Cx states for MWAIT, we need
      to expose the MWAIT capability (leaf 1). Furthermore we also need to
      expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly
      function.
      
      The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX
      operations, but it can't do it since it needs to be backwards compatible.
      Instead we choose to use the native CPUID to figure out if the MWAIT
      capability exists and use the XEN_SET_PDC query hypercall to figure out
      if the hypervisor wants us to expose the MWAIT_LEAF capability or not.
      
      Note: The XEN_SET_PDC query was implemented in c/s 23783:
      "ACPI: add _PDC input override mechanism".
      
      With this in place, instead of
       C3 ACPI IOPORT 415
      we get now
       C3:ACPI FFH INTEL MWAIT 0x20
      
      Note: The cpu_idle which would be calling the mwait variants for idling
      never gets set b/c we set the default pm_idle to be the hypercall variant.
      Acked-by: default avatarJan Beulich <JBeulich@suse.com>
      [v2: Fix missing header file include and #ifdef]
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      73c154c6
    • Konrad Rzeszutek Wilk's avatar
      xen/setup/pm/acpi: Remove the call to boot_option_idle_override. · cc7335b2
      Konrad Rzeszutek Wilk authored
      We needed that call in the past to force the kernel to use
      default_idle (which called safe_halt, which called xen_safe_halt).
      
      But set_pm_idle_to_default() does now that, so there is no need
      to use this boot option operand.
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      cc7335b2
  11. 26 Feb, 2012 1 commit
  12. 24 Jan, 2012 1 commit
  13. 12 Jan, 2012 4 commits
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Support pci_reset_function, aka FLR or D3 support. · cd9db80e
      Konrad Rzeszutek Wilk authored
      We use the __pci_reset_function_locked to perform the action.
      Also on attaching ("bind") and detaching ("unbind") we save and
      restore the configuration states. When the device is disconnected
      from a guest we use the "pci_reset_function" to also reset the
      device before being passed to another guest.
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      cd9db80e
    • Konrad Rzeszutek Wilk's avatar
      pci: Introduce __pci_reset_function_locked to be used when holding device_lock. · a96d627a
      Konrad Rzeszutek Wilk authored
      The use case of this is when a driver wants to call FLR when a device
      is attached to it using the SysFS "bind" or "unbind" functionality.
      
      The call chain when a user does "bind" looks as so:
      
       echo "0000:01.07.0" > /sys/bus/pci/drivers/XXXX/bind
      
      and ends up calling:
        driver_bind:
          device_lock(dev);  <=== TAKES LOCK
          XXXX_probe:
               .. pci_enable_device()
               ...__pci_reset_function(), which calls
                       pci_dev_reset(dev, 0):
                              if (!0) {
                                      device_lock(dev) <==== DEADLOCK
      
      The __pci_reset_function_locked function allows the the drivers
      'probe' function to call the "pci_reset_function" while still holding
      the driver mutex lock.
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      a96d627a
    • Tang Liang's avatar
      xen: Utilize the restore_msi_irqs hook. · 8605c684
      Tang Liang authored
      to make a hypercall to restore the vectors in the MSI/MSI-X
      configuration space.
      Signed-off-by: default avatarTang Liang <liang.tang@oracle.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      8605c684
    • Linus Torvalds's avatar
      Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci · 7b67e751
      Linus Torvalds authored
      * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
        x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
        PCI: Increase resource array mask bit size in pcim_iomap_regions()
        PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
        PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
        PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
        x86/PCI: amd: factor out MMCONFIG discovery
        PCI: Enable ATS at the device state restore
        PCI: msi: fix imbalanced refcount of msi irq sysfs objects
        PCI: kconfig: English typo in pci/pcie/Kconfig
        PCI/PM/Runtime: make PCI traces quieter
        PCI: remove pci_create_bus()
        xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
        x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
        x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
        x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
        sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
        sparc/PCI: convert to pci_create_root_bus()
        sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
        powerpc/PCI: convert to pci_create_root_bus()
        powerpc/PCI: split PHB part out of pcibios_map_io_space()
        ...
      
      Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
      to the same patches being applied in other branches.
      7b67e751
  14. 11 Jan, 2012 7 commits
    • Ben Hutchings's avatar
      cpu: Register a generic CPU device on architectures that currently do not · 9f13a1fd
      Ben Hutchings authored
      frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
      do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
      which causes a generic CPU device to be registered for each present CPU,
      and make all these architectures select it.
      
      Richard Weinberger <richard@nod.at> covered UML and suggested using
      per_cpu.
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9f13a1fd
    • Ben Hutchings's avatar
      cpu: Do not return errors from cpu_dev_init() which will be ignored · 024f7846
      Ben Hutchings authored
      cpu_dev_init() is only called from driver_init(), which does not check
      its return value.  Therefore make cpu_dev_init() return void.
      
      We must register the CPU subsystem, so panic if this fails.
      
      If sched_create_sysfs_power_savings_entries() fails, the damage is
      contained, so ignore this (as before).
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      024f7846
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · 4f58cb90
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (54 commits)
        crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig
        crypto: serpent-sse2 - remove unneeded LRW/XTS #ifdefs
        crypto: serpent-sse2 - select LRW and XTS
        crypto: twofish-x86_64-3way - remove unneeded LRW/XTS #ifdefs
        crypto: twofish-x86_64-3way - select LRW and XTS
        crypto: xts - remove dependency on EXPERIMENTAL
        crypto: lrw - remove dependency on EXPERIMENTAL
        crypto: picoxcell - fix boolean and / or confusion
        crypto: caam - remove DECO access initialization code
        crypto: caam - fix polarity of "propagate error" logic
        crypto: caam - more desc.h cleanups
        crypto: caam - desc.h - convert spaces to tabs
        crypto: talitos - convert talitos_error to struct device
        crypto: talitos - remove NO_IRQ references
        crypto: talitos - fix bad kfree
        crypto: convert drivers/crypto/* to use module_platform_driver()
        char: hw_random: convert drivers/char/hw_random/* to use module_platform_driver()
        crypto: serpent-sse2 - should select CRYPTO_CRYPTD
        crypto: serpent - rename serpent.c to serpent_generic.c
        crypto: serpent - cleanup checkpatch errors and warnings
        ...
      4f58cb90
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security · e7691a1c
      Linus Torvalds authored
      * 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: (32 commits)
        ima: fix invalid memory reference
        ima: free duplicate measurement memory
        security: update security_file_mmap() docs
        selinux: Casting (void *) value returned by kmalloc is useless
        apparmor: fix module parameter handling
        Security: tomoyo: add .gitignore file
        tomoyo: add missing rcu_dereference()
        apparmor: add missing rcu_dereference()
        evm: prevent racing during tfm allocation
        evm: key must be set once during initialization
        mpi/mpi-mpow: NULL dereference on allocation failure
        digsig: build dependency fix
        KEYS: Give key types their own lockdep class for key->sem
        TPM: fix transmit_cmd error logic
        TPM: NSC and TIS drivers X86 dependency fix
        TPM: Export wait_for_stat for other vendor specific drivers
        TPM: Use vendor specific function for status probe
        tpm_tis: add delay after aborting command
        tpm_tis: Check return code from getting timeouts/durations
        tpm: Introduce function to poll for result of self test
        ...
      
      Fix up trivial conflict in lib/Makefile due to addition of CONFIG_MPI
      and SIGSIG next to CONFIG_DQL addition.
      e7691a1c
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 5cd9599b
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        autofs4: deal with autofs4_write/autofs4_write races
        autofs4: catatonic_mode vs. notify_daemon race
        autofs4: autofs4_wait() vs. autofs4_catatonic_mode() race
        hfsplus: creation of hidden dir on mount can fail
        block_dev: Suppress bdev_cache_init() kmemleak warninig
        fix shrink_dcache_parent() livelock
        coda: switch coda_cnode_make() to sane API as well, clean coda_lookup()
        coda: deal correctly with allocation failure from coda_cnode_makectl()
        securityfs: fix object creation races
      5cd9599b
    • Al Viro's avatar
      autofs4: deal with autofs4_write/autofs4_write races · d668dc56
      Al Viro authored
      Just serialize the actual writing of packets into pipe on
      a new mutex, independent from everything else in the locking
      hierarchy.  As soon as something has started feeding a piece
      of packet into the pipe to daemon, we *want* everything else
      about to try the same to wait until we are done.
      Acked-by: default avatarIan Kent <raven@themaw.net>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      d668dc56
    • Al Viro's avatar
      autofs4: catatonic_mode vs. notify_daemon race · 87533332
      Al Viro authored
      we need to hold ->wq_mutex while we are forming the packet to send,
      lest we have autofs4_catatonic_mode() setting wq->name.name to NULL
      just as autofs4_notify_daemon() decides to memcpy() from it...
      
      We do have check for catatonic mode immediately after that (under
      ->wq_mutex, as it ought to be) and packet won't be actually sent,
      but it'll be too late for us if we oops on that memcpy() from NULL...
      
      Fix is obvious - just extend the area covered by ->wq_mutex over
      that switch and check whether it's catatonic *before* doing anything
      else.
      Acked-by: default avatarIan Kent <raven@themaw.net>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      87533332