- 24 Mar, 2009 36 commits
-
-
Thierry Vignaud authored
Remove old comments about USB_EHCI_HCD. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
James Woodcock authored
A USB-serial converter device is plugged into a system, and a process opens it's device node. If the device is physically removed whilst the process still has its device node open, then other processes can sucessfully open the now non-existent device's node. I would expect that open() on a device that has been physically removed should return ENODEV. This is manifesting itself with getty on my system. I do the following: 1. set up inittab to spawn getty on ttyUSB0, eg: T1:23:respawn:/sbin/getty -L ttyUSB0 115200 vt100 2. Plug in USB-serial converter cable 3. Wait for a login prompt on a terminal program attached to the serial cable 4. Login 5. Pull the USB-serial converter cable from the box 6. getty doesn't realise that ttyUSB0 no longer exists as /dev/ttyUSB0 can still be opened. 7. Re-insert the USB-serial converter cable 8. You should no longer get a login prompt over the serial cable, as the the USB-serial cable now shows up as /dev/ttyUSB1, and getty is trying to talk to /dev/ttyUSB0. The attached patch will cause open("/dev/ttyUSB0", O_RDONLY) to return ENODEV after the USB-serial converter has been pulled. The patch was created against 2.6.28.1. I can supply it against something else if needs be. It is fairly simple, so should be OK. I am using a pl2303 device, although I don't think that makes any difference. From: James Woodcock <James.Woodcock@ACULAB.COM> Signed-off-by: -
Oliver Neukum authored
This removes the fallback to the generic method. It is cleaner to explicitely request it. Introducing this was my mistake. This will be solved by an explicit test and the driver being allowed to request what it needs to be done upon resumption. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Matt Kraai authored
338b67b0 removed the info macro and replaced its uses with dev_info. This patch does so for usb-skeleton.c, which was missed. Signed-off-by:
Matt Kraai <kraai@ftbfs.org> Signed-off-by:
-
Borislav Petkov authored
Make lines about usb_storage depending on SCSI visible when configuring the kernel in a 80x25 console Signed-off-by:
Borislav Petkov <petkovbb@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This lets userspace determine what the state of the RTS line is, which is what is needed to properly handle data flow for this device (it raises RTS when there is data to be sent from it.) Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by: -
Greg Kroah-Hartman authored
This patch allows data to be sent to the scanner. Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by: -
Ajay Kumar Gupta authored
NOP transceiver is used by all the usb transceiver which are mostly autonomous and doesn't require any programming or which are built into the usb ip itself.NOP transceiver only allocates the memory for struct xceiv and calls otg_set_transceiver() so function call to otg_get_transceiver() will return a valid transceiver. NOP transceiver device should be registered by calling usb_nop_xceiv_register() from platform files. Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Remove some pointless messages from the FTDI serial driver; I found these filling up syslog on one system. Also remove a pointless "break" after a "return" in the same area. Signed-off-by:
-
Frank Seidel authored
According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing peaces here for the usb subsystem. Signed-off-by:
Frank Seidel <frank@f-seidel.de> Signed-off-by:
-
Oliver Neukum authored
This patch makes use of the generic method if a serial driver provides no implementation. This simplifies implementing suspend/resume support in serial drivers. Signed-off-by:
-
Oliver Neukum authored
This exports a symbol for usb_serial_generic_resume, so that modules can use it. Signed-off-by:
-
Oliver Neukum authored
This removes an unnecessary check for autoresume from the generic resume method. The check has been obsoleted by the now delayed increase of the usage counter which makes the error this check prevented impossible. This change allows drivers which only use the bulk read URB the use of the generic method even if they support autosuspend. Signed-off-by:
-
Oliver Neukum authored
USB: serial: introduce a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension This patch introduces a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension. That is necessary to let drivers know whether they should report an error back. Signed-off-by: -
Roel Kluin authored
With a postfix decrement count will reach -1 rather than 0, so the warning will not be issued. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
-
Oliver Neukum authored
this does the standard support for suspend/resume for the opticon driver. Signed-off-by:
-
Oliver Neukum authored
This patch implements suspend and resume methods for the option driver. With my hardware I can even suspend the system and keep up a connection for a short time. Signed-off-by:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Darius Augulis authored
Workaround of hw bug in IMX UDC. This bug causes wrong handling of CFG_CHG interrupt. Workaround is documented inline source code. Signed-off-by:
Darius Augulis <augulis.darius@gmail.com> Signed-off-by:
-
Darius Augulis authored
Fix ep0 interrupt handling in IMX UDC Gadget. Signed-off-by:
-
Darius Augulis authored
Fix code style errors in IMX UDC Gadget. Signed-off-by:
-
Darius Augulis authored
Fix small bugs and add some omptimization in IMX UDC Gadget. Signed-off-by:
-
Werner Cornelius authored
Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds: - support all baudrates, not just a hard-coded set - support for controlling DTR, RTS and CTS Features still missing: - character length other than 8 bits - parity settings - break control I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for refusing a similar patch from Tollef Fog Heen. Usage example by Tollef Fog Heen : TEMPer USB thermometer <http://err.no/src/TEMPer.c> Signed-off-by:Werner Cornelius <Werner.Cornelius@cornelius-consult.de> Signed-off-by:
Boris Hajduk <boris@hajduk.org> Signed-off-by:
-
Huang Weiyi authored
Removed duplicated #include in drivers/usb/gadget/ci13xxx_udc.c Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Acked-by:
-
Julia Lawall authored
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
priv is checked not to be NULL near the beginning of the function and not changed subsequently, making the test redundant. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by:
-
Julia Lawall authored
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by:
-
Julia Lawall authored
The functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) are moved from include/linux/usb.h to include/linux/usb/ch9.h. include/linux/usb/ch9.h makes more sense for these functions because they only depend on constants that are defined in this file. Signed-off-by:
-
Robert Jarzmik authored
Add the vbus_draw() callback to inform the transceiver, if it exists, how much current may be drawn. The decision is taken on gadget driver side using the configuration chosen by the host and its bMaxPower field. Some systems can use the host's VBUS supply to augment or recharge a battery. (There's also a default of 100 mA for unconfigured devices, or 8 mA if they're OTG devices.) Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Robert Jarzmik authored
When a transceiver driver is used, no automatic udc enable is done. The transceiver (OTG or not) should : - take care of VBus sensing - call usb_gadget_vbus_connect() - call usb_gadget_vbus_disconnect() The pullup should remain within this driver's management, either by gpio_pullup of udc_command() fields. Signed-off-by:
-
Robert Jarzmik authored
On vbus_session() call, optionally activate D+ pullup resistor and enable the udc, or deactivate D+ pullup resistor and disable the udc. It is intentional to not handle any VBus sense related irq. An external transceiver driver (like gpio_vbus) should catch VBus sense signal, and call usb_gadget_vbus_connect() or usb_gadget_vbus_disconnect(). Signed-off-by:
-
Robert Jarzmik authored
Prepare pxa27x_udc to handle usb D+ pullup properly : it should connect the pullup resistor and disconnect it only if no external transceiver is handling it. [ dbrownell@users.sourceforge.net: kerneldoc and gpio fixes ] Signed-off-by:
-
Robert Jarzmik authored
Call usb_gadget_vbus_connect() and ...disconnect() from a workqueue rather than from an irq handler, allowing msleep() calls in vbus_session. Update kerneldoc to match. [ dbrownell@users.sourceforge.net: more kerneldoc updates ] Signed-off-by:
-
Pete Zaitcev authored
The usblp in 2.6.18 polled for status regardless if we actually needed it. At some point I dropped it, to save the batteries if nothing else. As it turned out, printers exist (e.g. Canon BJC-3000) that need prodding this way or else they stop. This patch restores the old behaviour. If you want to save battery, don't leave jobs in the print queue. I tested this on my printers by printing and examining usbmon traces to make sure status is being requested and printers continue to print. Tuomas Jäntti verified the fix on BJC-3000. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Alan Stern authored
This patch (as1203) increases the max_sector limit for USB tape drives. By default usb-storage sets max_sectors to 240 (i.e., 120 KB) for all devices. But tape drives need a higher limit, since tapes can and do have very large block sizes. Without the ability to transfer an entire large block in a single command, such tapes can't be used. This fixes Bugzilla #12207. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Phil Mitchell <philipm@sybase.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Restore some code that was wrongly dropped from the RNDIS driver, and caused interop problems observed with OpenMoko. The issue is with hardware which needs help conforming to part of the USB 2.0 spec (section 8.5.3.2); some can automagically send a ZLP in response to an unexpected IN, but not all chips will do that. We don't need to check the packet length ourselves the way earlier code did, since the UDC must already check it. But we do need to tell the UDC when it must force a short packet termination of the data stage. (Based on a patch from Aric D. Blumer <aric at sdgsystems.com>) Signed-off-by:
-
Alan Stern authored
Apparently the Configuration and Interface strings aren't used as often as the Vendor, Product, and Serial strings. In at least one device (a Saitek Cyborg Gold 3D joystick), attempts to read the Configuration string cause the device to stop responding to Control requests. This patch (as1226) adds a quirks flag, telling the kernel not to read a device's Configuration or Interface strings, together with a new quirk for the offending joystick. Reported-by:
Melchior FRANZ <melchior.franz@gmail.com> Tested-by:
-
- 23 Mar, 2009 4 commits
-
-
Linus Torvalds authored
-
Kyle McMartin authored
With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jody McIntyre authored
Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by:
Jody McIntyre <scjody@sun.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
-
