- 12 Mar, 2017 40 commits
-
-
Masato Suzuki authored
commit 7bb3a371 upstream. The introduction of the multi-device feature partially broke the support for zoned block devices. In the function f2fs_scan_devices, sbi->devs allocation and initialization is skipped in the case of a single device mount. This result in no device information structure being allocated for the device. This is fine if the device is a regular device, but in the case of a zoned block device, the device zone type array is not initialized, which causes the function __f2fs_issue_discard_zone to fail as get_blkz_type is unable to determine the zone type of a section. Fix this by always allocating and initializing the sbi->devs device information array even in the case of a single device if that device is zoned. For this particular case, make sure to obtain a reference on the single device so that the call to blkdev_put() in destroy_device_list operates as expected. Fixes: 3c62be17 ("f2fs: support multiple devices") Signed-off-by:
Masato Suzuki <masato.suzuki@wdc.com> Acked-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jaegeuk Kim authored
commit 8b107f5b upstream. If segs_per_sec is over 1 like under SMR, previously f2fs issues discard commands redundantly on the same section, since we didn't move end position for the previous discard command. E.g., start end | | prefree_bitmap = [01111100111100] And, after issue discard for this section, end start | | prefree_bitmap = [01111100111100] Select this section again by searching from (end + 1), start end | | prefree_bitmap = [01111100111100] Fixes: 36abef4e ("f2fs: introduce mode=lfs mount option") Cc: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Hou Pengyang authored
commit e93b9865 upstream. For foreground gc, greedy algorithm should be adapted, which makes this formula work well: (2 * (100 / config.overprovision + 1) + 6) But currently, we fg_gc have a prior to select bg_gc victim segments to gc first, these victims are selected by cost-benefit algorithm, we can't guarantee such segments have the small valid blocks, which may destroy the f2fs rule, on the worstest case, would consume all the free segments. This patch fix this by add a filter in check_bg_victims, if segment's has # of valid blocks over overprovision ratio, skip such segments. Signed-off-by:
Hou Pengyang <houpengyang@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Jaegeuk Kim authored
commit 88c5c13a upstream. It turns out a stakable filesystem like sdcardfs in AOSP can trigger multiple vfs_create() to lower filesystem. In that case, f2fs will add multiple dentries having same name which breaks filesystem consistency. Until upper layer fixes, let's work around by f2fs, which shows actually not much performance regression. Signed-off-by:
-
Yunlei He authored
commit 7855eba4 upstream. This patch fix a problem of using memory after free in function __try_merge_extent_node. Fixes: 0f825ee6 ("f2fs: add new interfaces for extent tree") Signed-off-by:
Yunlei He <heyunlei@huawei.com> Reviewed-by:
-
Weston Andros Adamson authored
commit ed92d8c1 upstream. We're not taking into account that the space needed for the (variable length) attr bitmap, with the result that we'd sometimes get a spurious ERANGE when the ACL data got close to the end of a page. Just add in an extra page to make sure. Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
J. Bruce Fields authored
commit 6682c14b upstream. Bitmap and attrlen follow immediately after the op reply header. This was an oversight from commit bf118a34. Consequences of this are just minor efficiency (extra calls to xdr_shrink_bufhead). Fixes: bf118a34 "NFSv4: include bitmap in nfsv4 get acl data" Reviewed-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit a5e14c93 upstream. This reverts commit 2cf10cdd. The patch has been seen to cause excessive looping. Reported-by:
Olga Kornievskaia <aglo@umich.edu> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit df3ab232 upstream. If we see that our pNFS READ/WRITE/COMMIT operation failed, but we also see that our layout segment is no longer valid, then we need to get a new layout segment before retrying. Fixes: 90816d1d ("NFSv4.1/flexfiles: Don't mark the entire deviceid...") Signed-off-by:
-
Trond Myklebust authored
commit 9d8cacbf upstream. Copy offload code needs to be hooked into the code for handling NFS4ERR_BAD_STATEID by ensuring that we set the "stateid" field in struct nfs4_exception. Reported-by:
-
Trond Myklebust authored
commit a974deee upstream. If we exit because the file access check failed, we currently leak the struct nfs4_state. We need to attach it to the open context before returning. Fixes: 3efb9722 ("NFSv4: Refactor _nfs4_open_and_get_state..") Signed-off-by:
-
Christoph Hellwig authored
commit 783112f7 upstream. Both the NFS protocols and the Linux VFS use a setattr operation with a bitmap of attributes to set to set various file attributes including the file size and the uid/gid. The Linux syscalls never mix size updates with unrelated updates like the uid/gid, and some file systems like XFS and GFS2 rely on the fact that truncates don't update random other attributes, and many other file systems handle the case but do not update the other attributes in the same transaction. NFSD on the other hand passes the attributes it gets on the wire more or less directly through to the VFS, leading to updates the file systems don't expect. XFS at least has an assert on the allowed attributes, which caught an unusual NFS client setting the size and group at the same time. To handle this issue properly this splits the notify_change call in nfsd_setattr into two separate ones. Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Christoph Hellwig authored
commit 758e99fe upstream. Simplify exit paths, size_change use. Signed-off-by:
-
Stefano Babic authored
commit 9797484b upstream. Commit 050c3d52 ("vme: make core vme support explicitly non-modular") dropped the remove function because it appeared as if it was for removal of the bus, which is not supported. However, vme_bus_remove() is called when a VME device is removed from the bus and not when the bus is removed; as it calls the VME device driver's cleanup function. Without this function, the remove() in the VME device driver is never called and VME device drivers cannot be reloaded again. Here we restore the remove function that was deleted in that commit, and the reference to the function in the bus structure. Fixes: 050c3d52 ("vme: make core vme support explicitly non-modular") Cc: Manohar Vanga <manohar.vanga@gmail.com> Acked-by:
Martyn Welch <martyn@welchs.me.uk> Cc: devel@driverdev.osuosl.org Signed-off-by:
Stefano Babic <sbabic@denx.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Larry Finger authored
commit 6773386f upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Ping-Ke Shih authored
commit 40b368af upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Bjorn Andersson authored
commit 3e8b571a upstream. The "fw" firmware object is passed from the remoteproc core and should not be overwritten, as that results in leaked buffers and a double free of the the last firmware object. Fixes: 051fb70f ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Andrew Price authored
commit f38e5fb9 upstream. We must hold the rcu read lock across looking up glocks and trying to bump their refcount to prevent the glocks from being freed in between. Signed-off-by:
Andrew Price <anprice@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Steve Wise authored
commit f2625f7d upstream. cma_accept_iw() needs to return an error if conn_params is NULL. Since this is coming from user space, we can crash. Reported-by:
Shaobo He <shaobo@cs.utah.edu> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 55efcfcd upstream. The RDMA core uses ib_pack() to convert from unpacked CPU structs to on-the-wire bitpacked structs. This process requires that 1 bit fields are declared as u8 in the unpacked struct, otherwise the packing process does not read the value properly and the packed result is wired to 0. Several places wrongly used int. Crucially this means the kernel has never, set reversible correctly in the path record request. It has always asked for irreversible paths even if the ULP requests otherwise. When the kernel is used with a SM that supports this feature, it completely breaks communication management if reversible paths are not properly requested. The only reason this ever worked is because opensm ignores the reversible bit. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit d77044d1 upstream. VSS may use a char device to support the communication between the user level daemon and the driver. When the VSS channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new VSS offer from the host. Implement this logic. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 20951c75 upstream. Fcopy may use a char device to support the communication between the user level daemon and the driver. When the Fcopy channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new Fcopy offer from the host. Implement this logic. Signed-off-by:
-
K. Y. Srinivasan authored
commit 5a66fecb upstream. KVP may use a char device to support the communication between the user level daemon and the driver. When the KVP channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new KVP offer from the host. Implement this logic. Signed-off-by:
-
K. Y. Srinivasan authored
commit ccb61f8a upstream. The host can rescind a channel that has been offered to the guest and once the channel is rescinded, the host does not respond to any requests on that channel. Deal with the case where the guest may be blocked waiting for a response from the host. Signed-off-by:
-
K. Y. Srinivasan authored
commit e7e97dd8 upstream. After the channel is rescinded, the host does not read from the rescinded channel. Fail writes to a channel that has already been rescinded. If we permit writes on a rescinded channel, since the host will not respond we will have situations where we will be unable to unload vmbus drivers that cannot have any outstanding requests to the host at the point they are unoaded. Signed-off-by:
-
Vitaly Kuznetsov authored
commit 56ef6718 upstream. It may happen that secondary CPUs are still alive and resetting hv_context.tsc_page will cause a consequent crash in read_hv_clock_tsc() as we don't check for it being not NULL there. It is safe as we're not freeing this page anyways. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 3c7630d3 upstream. Initializing hv_context.percpu_list in hv_synic_alloc() helps to prevent a crash in percpu_channel_enq() when not all CPUs were online during initialization and it naturally belongs there. Signed-off-by:
-
Vitaly Kuznetsov authored
commit 421b8f20 upstream. It may happen that not all CPUs are online when we do hv_synic_alloc() and in case more CPUs come online later we may try accessing these allocated structures. Signed-off-by:
-
Krzysztof Opasiak authored
commit 749494b6 upstream. Since commit: ba1582f2 ("usb: gadget: f_hid: use alloc_ep_req()") we cannot allocate any requests in bind() as we check if we should align request buffer based on endpoint descriptor which is assigned in set_alt(). Allocating request in bind() function causes a NULL pointer dereference. This commit moves allocation of IN request from bind() to set_alt() to prevent this issue. Fixes: ba1582f2 ("usb: gadget: f_hid: use alloc_ep_req()") Tested-by:
David Lechner <david@lechnology.com> Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Krzysztof Opasiak authored
commit 33e4c1a9 upstream. As IN request has to be allocated in set_alt() and released in disable() we cannot use mutex to protect it as we cannot sleep in those funcitons. Let's replace this mutex with a spinlock. Tested-by:
-
Krzysztof Opasiak authored
commit aa65d11a upstream. When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by:
-
Krzysztof Opasiak authored
commit 20d2ca95 upstream. Requests for out endpoint are allocated in bind() function but never released. This commit ensures that all pending requests are released when we disable out endpoint. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by:
-
Magnus Lilja authored
commit 5528954a upstream. Commit 304f7e5e ("usb: gadget: Refactor request completion") removed check if req->req.complete is non-NULL, resulting in a NULL pointer derefence and a kernel panic. This patch adds an empty complete function instead of re-introducing the req->req.complete check. Fixes: 304f7e5e ("usb: gadget: Refactor request completion") Signed-off-by:
Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by:
-
Krzysztof Opasiak authored
commit 8236800d upstream. Since: commit 855ed04a ("usb: gadget: udc-core: independent registration of gadgets and gadget drivers") if we load gadget module but there is no free udc available then it will be stored on a pending gadgets list. $ modprobe g_zero.ko $ modprobe g_ether.ko [] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers We scan this list each time when new UDC appears in system. But we can get a free UDC each time after gadget unbind. This commit add scanning of that list directly after unbinding gadget from udc. Thanks to this, when we unload first gadget: $ rmmod g_zero.ko gadget which is pending is automatically attached to that UDC (if name matches). Fixes: 855ed04a ("usb: gadget: udc-core: independent registration of gadgets and gadget drivers") Signed-off-by:
-
William wu authored
commit 5de4e1ea upstream. The commit 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") move add hcd to the end of probe, this cause hcc_params uninitiated, because xHCI driver sets hcc_params in xhci_gen_setup() called from usb_add_hcd(). This patch checks the Maximum Primary Stream Array Size in the hcc_params register after add primary hcd. Signed-off-by:
William wu <william.wu@rock-chips.com> Acked-by:
Roger Quadros <rogerq@ti.com> Fixes: 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") Signed-off-by:
-
Felipe Balbi authored
commit ffb80fc6 upstream. At least macOS seems to be sending ClearFeature(ENDPOINT_HALT) to endpoints which aren't Halted. This makes DWC3's CLEARSTALL command time out which causes several issues for the driver. Instead, let's just return 0 and bail out early. Signed-off-by:
-
Alexandre Bailon authored
commit a994ce2d upstream. DA8xx driver is registering and using the CPPI 3.0 DMA controller but actually, the DA8xx has a CPPI 4.1 DMA controller. Remove the CPPI 3.0 quirk and methods. Fixes: f8e9f34f ("usb: musb: Fix up DMA related macros") Fixes: 7f6283ed ("usb: musb: Set up function pointers for DMA") Signed-off-by:
Alexandre Bailon <abailon@baylibre.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 61cd1b4c upstream. ds2490 driver was doing USB transfers from / to buffers on a stack. This is not permitted and made the driver non-working with vmapped stacks. Since all these transfers are done under the same bus_mutex lock we can simply use shared buffers in a device private structure for two most common of them. While we are at it, let's also fix a comparison between int and size_t in ds9490r_search() which made the driver spin in this function if state register get requests were failing. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Maciej S. Szmigiero authored
commit d2ce4ea1 upstream. Near the beginning of w1_attach_slave_device() we increment a w1 master reference count. Later, when we are going to exit this function without actually attaching a slave device (due to failure of __w1_attach_slave_device()) we need to decrement this reference count back. Signed-off-by:
-
Marc Kleine-Budde authored
commit 7c426313 upstream. The priv->cmd_msg_buffer is allocated in the probe function, but never kfree()ed. This patch converts the kzalloc() to resource-managed kzalloc. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
