- 16 Nov, 2020 10 commits
-
-
Ville Syrjälä authored
On icl+ we want to populate both crtc_state.{shared_dpll,dpll_hw_state} and crtc_state.port_dplls[] during readout, whereas on pre-icl we want to leave the latter stuff untouched. Rather than adding more ifs into hsw_get_ddi_port_state() to copy the DPLL hw state around let's just move the whole dpll readout into hsw_get_ddi_dpll() & co. Slightly repetitive, but meh. Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201109231239.17002-2-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Add a wrapper for the pll .get_hw_state() vfunc. Makes life a bit less miserable when you don't have to worry where the function pointer is stored. Signed-off-by:
-
Ville Syrjälä authored
Replace skl_adjusted_plane_pixel_rate() with the generic intel_plane_pixel_rate(). The two should produce identical results. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
Store the relative data rate for planes in the crtc state so that we don't have to use intel_atomic_crtc_state_for_each_plane_state() to compute it even for the planes that are no part of the current state. Should probably just nuke this stuff entirely an use the normal plane data rate instead. The two are slightly different since this relative data rate doesn't factor in the actual pixel clock, so it's a bit odd thing to even call a "data rate". And since the watermarks are computed based on the actual data rate anyway I don't really see what the point of this relative data rate is. But that's for the future... Signed-off-by:
-
Ville Syrjälä authored
In order to remove intel_atomic_crtc_state_for_each_plane_state() from skl_crtc_can_enable_sagv() we can simply precompute whether each wm level can tolerate the SAGV block time latency or not. This has the nice side benefit that we remove the duplicated wm level latency calculation. In fact the copy of that code we had in skl_crtc_can_enable_sagv() didn't even handle WaIncreaseLatencyIPCEnabled/Display WA #1141 whereas the copy in skl_compute_plane_wm() did. So now we just have the one copy which handles all the w/as. Signed-off-by:
-
Ville Syrjälä authored
Document what each of the "raw" vs. "optimal" vs. "intermediate" watermarks do. Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Ville Syrjälä authored
intel_atomic_crtc_state_for_each_plane_state() peeks at the plane's current state without holding the plane's mutex, trusting that the crtc's mutex will protect it. In practice that does work since our planes can't move between pipes, but it sets a bad example. intel_atomic_crtc_state_for_each_plane_state() also relies on crtc_state.uapi.plane_mask which may be full of lies when it comes to the bigjoiner stuff, so soon we can't use it as is anyway. So best to just get rid of it entirely. Which we can easily do by switching to the g4x/vlv "raw" watermark approach. Later on we should even be able to move the "raw" watermark computation into the normal .plane_check() code, leaving only the merging/clamping of the final watermarks to the later stages. But that will require adjusting the ilk+ wm code similarly as well. Signed-off-by:
-
Ville Syrjälä authored
Pass the whole intel_atomic_state to skl_build_pipe_wm() and skl_allocate_pipe_ddb() so we can start to iterate stuff containerd in the commit. Signed-off-by:
-
Manasi Navare authored
No functional changes here, just adds a from_crtc_state as a prep for bigjoiner v2: * More prep with intel_atomic_state (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Manasi Navare authored
No functional changes, to align with previous cleanups pass intel_atomic_state instead of drm_atomic_state. Also pass this intel_atomic_state with crtc_state to some of the atomic_check functions. v2: * Squash some changes from next patch (Ville) Signed-off-by:
-
- 13 Nov, 2020 6 commits
-
-
Maarten Lankhorst authored
With bigjoiner, there will be 2 pipes driving 2 halves of 1 transcoder, because of this, we need a pipe_mode for various calculations, including for example watermarks, plane clipping, etc. v10: * remove redundant pipe_mode assignment (Ville) v9: * pipe_mode in state dump nd state check (Ville) v8: * Add pipe_mode in readout in verify_crtc_state (Ville) v7: * Remove redundant comment (Ville) * Just keep mode instead of pipe_mode (Ville) v6: * renaming in separate function, only pipe_mode here (Ville) * Add description (Maarten) v5: * Rebase (Manasi) v4: * Manual rebase (Manasi) v3: * Change state to crtc_state, fix rebase err (Manasi) v2: * Manual Rebase (Manasi) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> [vsyrjala: * Fix state checker * Fix state dump * Use pipe_mode for linetime watermarks * Make sure pipe_mode normal timings are correct since the silly ddb code uses them * Drop the redundant pipe_mode copies from intel_modeset_pipe_config() and intel_crtc_copy_uapi_to_hw_state() * Use drm_mode_copy() all over] Signed-off-by:
-
Ville Syrjälä authored
Collect up a bunch of derived state "readout" into a common helper, which we can call from both intel_encoder_get_config() and intel_crtc_get_pipe_config(). Signed-off-by:
-
Ville Syrjälä authored
Generalize intel_mode_from_pipe_config() to work on any two arbitrary modes. Also relocate the code for the future, and make it static since it's not needed elsewhere. Signed-off-by:
-
Ville Syrjälä authored
No reason to make the callers of intel_crtc_get_pipe_config() populate hw.active. Let's do it in intel_crtc_get_pipe_config() itself. hw.enable we leave up to the callers since it's slightly different for readout vs. state check. Signed-off-by:
-
Manasi Navare authored
Create a new function intel_crtc_get_pipe_config() that calls platform specific hooks for get_pipe_config() No functional change here. Suggested-by:
-
Manasi Navare authored
No functional changes, create a separate intel_encoder_get_config() function that calls encoder->get_config hook. This is needed so that later we can add beigjoienr related readout here. Signed-off-by:
-
- 12 Nov, 2020 3 commits
-
-
Manasi Navare authored
No functional changes. This patch just moves some mode checks around to prepare for adding bigjoiner related mode validation Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
José Roberto de Souza authored
Just following what we do in many other places, DG1 is a exception so move it to the top instead of add it inside of INTEL_GEN(dev_priv) >= 12. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201111162408.98002-2-jose.souza@intel.com
-
José Roberto de Souza authored
DC9 has a separate HW flow from the rest of the DC states and it is available in GEN9 LP platforms and on GEN11 and newer, so here moving the assignment of the mask to a single conditional block to simplifly code. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
- 11 Nov, 2020 7 commits
-
-
Lucas De Marchi authored
Now that hpd/display related calls are split from the rest in intel_irq_init(), skip all of that in case we don't have display. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Lucas De Marchi authored
In intel_irq_init() move what's display/hpd related after what is gt and guc. This makes it easier to support !HAS_DISPLAY() in future. Signed-off-by:
-
Lucas De Marchi authored
Use the convention of new platforms first. No need to special case HAS_GMCH() since that stopped being true at the lattest on gen8 (for cherryview). Signed-off-by:
-
Jani Nikula authored
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so return earlier from intel_modeset_init() for clarity. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Display is always disabled and enabled when resetting any engine, but if there is no display it should not do anything with display and only reset the needed engines. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Rename intel_finish_reset to intel_display_finish_reset, so it's clear from gt/ that we are calling out the display code. Signed-off-by:
-
Lucas De Marchi authored
Rename intel_prepare_reset to intel_display_prepare_reset, so it's clear from gt/ that we are calling out the display code. Signed-off-by:
-
- 10 Nov, 2020 1 commit
-
-
Ville Syrjälä authored
Reduce this maintenance nightmare a bit by converting the plane min/max width/height stuff into vfuncs. Now, if I could just think of a nice way to also use this for intel_mode_valid_max_plane_size()... Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com>
-
- 09 Nov, 2020 2 commits
-
-
Tejas Upadhyay authored
JSL has update in vswing table for eDP. BSpec: 21257 Changes since V1: - Fixed few checkpatch errors Cc: Souza Jose <jose.souza@intel.com> Signed-off-by:Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by:
-
Lucas De Marchi authored
DG1 uses 2 registers for the ddi clock mapping, with PHY A and B using DPCLKA_CFGCR0 and PHY C and D using DPCLKA1_CFGCR0. Hide this behind a single macro that chooses the correct register according to the phy being accessed, use the correct bitfields for each pll/phy and implement separate functions for DG1 since it doesn't share much with ICL/TGL anymore. The previous values were correct for PHY A and B since they were using the same register as before and the bitfields were matching. v2: Add comment and try to simplify DG1_DPCLKA* macros by reusing previous ones v3: - Fix DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK() after wrong macro reuse - Move phy -> id map to a separate macro (Aditya) - Remove DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK where not required (Aditya) - Use drm_WARN_ON Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Clinton Taylor <Clinton.A.Taylor@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
-
- 06 Nov, 2020 2 commits
-
-
Ville Syrjälä authored
To help diagnose modifier related issues let's include that information in the various state dumps. Cc: Simon Ser <contact@emersion.fr> Signed-off-by:
Simon Ser <contact@emersion.fr>
-
Ville Syrjälä authored
Sort the EHL/JSL PCI IDs numerically. Some order seems better than randomness. v2: Deal with the JSL vs. EHL split v3: Rebase due to 0x4500 removal Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> #v1 Signed-off-by:
-
- 05 Nov, 2020 3 commits
-
-
Tejas Upadhyay authored
As per W/A implemented for TGL to program half of the nominal DCO divider fraction value which is also applicable on EHL. Changes since V2: - Apply stepping B0 till FOREVER - B0 - revid update as per Bspec 29153 Changes since V1: - ehl_ used as to keep earliest platform prefix - WA required B0 stepping onwards Cc: Deak Imre <imre.deak@intel.com> Signed-off-by: -
José Roberto de Souza authored
Replace the previous approach to force compute the initial PSR state after i915 take over from firmware by the better and recently added initial_fastset_check() hook. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Jani Nikula authored
Catch up with v5.10-rc2 and drm-misc-next. Signed-off-by:
-
- 04 Nov, 2020 4 commits
-
-
Imre Deak authored
Fix a typo that led to some MST short pulse event handling issue (the short pulse event was handled for both encoder instances, each having its own state). Fixes: 1d8ca002 ("drm/i915: Add PORT_TCn aliases to enum port") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-queued-2020-11-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v5.11 Highlights: - More DG1 enabling (Lucas, Matt, Aditya, Anshuman, Clinton, Matt, Stuart, Venkata) - Integer scaling filter support (Pankaj Bharadiya) - Asynchronous flip support (Karthik) Generic: - Fix gen12 forcewake tables (Matt) - Haswell PCI ID updates (Alexei Podtelezhnikov) Display: - ICL+ DSI command mode enabling (Vandita) - Shutdown displays grafecully on reboot/shutdown (Ville) - Don't register display debugfs when there is no display (Lucas) - Fix RKL CDCLK table (Matt) - Limit EHL/JSL eDP to HBR2 (José) - Handle incorrectly set (by BIOS) PLLs and DP link rates at probe (Imre) - Fix mode valid check wrt bpp for "YCbCr 4:2:0 only" modes (Ville) - State checker and dump fixes (Ville) - DP AUX backlight updates (Aaron Ma, Sean Paul) - Add DP LTTPR non-transparent link training mode (Imre) - PSR2 selective fetch enabling (José) - VBT updates (José) - HDCP updates (Ramalingam) Cleanups and refactoring: - HPD pin, AUX channel, and Type-C port identifier cleanup (Ville) - Hotplug and irq refactoring (Ville) - Better DDI encoder and AUX channel names (Ville) - Color LUT code cleanups (Ville) - Combo PHY code cleanups (Ville) - LSPCON code cleanups (Ville) - Documentation fixes (Mauro, Chris) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87o8kehbaj.fsf@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.11: UAPI Changes: - doc: rules for EBUSY on non-blocking commits; requirements for fourcc modifiers; on parsing EDID - fbdev/sbuslib: Remove unused FBIOSCURSOR32 - fourcc: deprecate DRM_FORMAT_MOD_NONE - virtio: Support blob resources for memory allocations; Expose host-visible and cross-device features Cross-subsystem Changes: - devicetree: Add vendor Prefix for Yes Optoelectronics, Shanghai Top Display Optoelectronics - dma-buf: Add struct dma_buf_map that stores DMA pointer and I/O-memory flag; dma_buf_vmap()/vunmap() return address in dma_buf_map; Use struct_size() macro Core Changes: - atomic: pass full state to CRTC atomic enable/disable; warn for EBUSY during non-blocking commits - dp: Prepare for DP 2.0 DPCD - dp_mst: Receive extended DPCD caps - dma-buf: Documentation - doc: Format modifiers; dma-buf-map; Cleanups - fbdev: Don't use compat_alloc_user_space(); mark as orphaned - fb-helper: Take lock in drm_fb_helper_restore_work_fb() - gem: Convert implementation and drivers to GEM object functions, remove GEM callbacks from struct drm_driver (expect gem_prime_mmap) - panel: Cleanups - pci: Add legacy infix to drm_irq_by_busid() - sched: Avoid infinite waits in drm_sched_entity_destroy() - switcheroo: Cleanups - ttm: Remove AGP support; Don't modify caching during swapout; Major refactoring of the implementation and API that affects all depending drivers; Add ttm_bo_wait_ctx(); Add ttm_bo_pin()/unpin() in favor of TTM_PL_FLAG_NO_EVICT; Remove ttm_bo_create(); Remove fault_reserve_notify() callback; Push move() implementation into drivers; Remove TTM_PAGE_FLAG_WRITE; Replace caching flags with init-time cache setting; Push ttm_tt_bind() into drivers; Replace move_notify() with delete_mem_notify(); No overlapping memcpy(); no more ttm_set_populated() - vram-helper: Fix BO top-down placement; TTM-related changes; Init GEM object functions with defaults; Default placement in system memory; Cleanups Driver Changes: - amdgpu: Use GEM object functions - armada: Use GEM object functions - aspeed: Configure output via sysfs; Init struct drm_driver with - ast: Reload LUT after FB format changes - bridge: Add driver and DT bindings for anx7625; Cleanups - bridge/dw-hdmi: Constify ops - bridge/ti-sn65dsi86: Add retries for link training - bridge/lvds-codec: Add support for regulator - bridge/tc358768: Restore connector support DRM_GEM_CMA_DRIVEROPS; Cleanups - display/ti,j721e-dss: Add DT properies assigned-clocks, assigned-clocks-parent and dma-coherent - display/ti,am65s-dss: Add DT properies assigned-clocks, assigned-clocks-parent and dma-coherent - etnaviv: Use GEM object functions - exynos: Use GEM object functions - fbdev: Cleanups and compiler fixes throughout framebuffer drivers - fbdev/cirrusfb: Avoid division by 0 - gma500: Use GEM object functions; Fix double-free of connector; Cleanups - hisilicon/hibmc: I2C-based DDC support; Use to_hibmc_drm_device(); Cleanups - i915: Use GEM object functions - imx/dcss: Init driver with DRM_GEM_CMA_DRIVER_OPS; Cleanups - ingenic: Reset pixel clock when parent clock changes; support reserved memory; Alloc F0 and F1 DMA channels at once; Support different pixel formats; Revert support for cached mmap buffers on F0/F1; support 30-bit/24-bit/8-bit-palette modes - komeda: Use DEFINE_SHOW_ATTRIBUTE - mcde: Detect platform_get_irq() errors - mediatek: Use GEM object functions - msm: Use GEM object functions - nouveau: Cleanups; TTM-related changes; Use GEM object functions - omapdrm: Use GEM object functions - panel: Add driver and DT bindings for Novatak nt36672a; Add driver and DT bindings for YTC700TLAG-05-201C; Add driver and DT bindings for TDO TL070WSH30; Cleanups - panel/mantix: Fix reset; Fix deref of NULL pointer in mantix_get_modes() - panel/otm8009a: Allow non-continuous dsi clock; Cleanups - panel/rm68200: Allow non-continuous dsi clock; Fix mode to 50 FPS - panfrost: Fix job timeout handling; Cleanups - pl111: Use GEM object functions - qxl: Cleanups; TTM-related changes; Pin new BOs with ttm_bo_init_reserved() - radeon: Cleanups; TTM-related changes; Use GEM object functions - rockchip: Use GEM object functions - shmobile: Cleanups - tegra: Use GEM object functions - tidss: Set drm_plane_helper_funcs.prepare_fb - tilcdc: Don't keep vblank interrupt enabled all the time - tve200: Detect platform_get_irq() errors - vc4: Use GEM object functions; Only register components once DSI is attached; Add Maxime as maintainer - vgem: Use GEM object functions - via: Simplify critical section in via_mem_alloc() - virtgpu: Use GEM object functions - virtio: Implement blob resources, host-visible and cross-device features; Support mapping of host-allocated resources; Use UUID APi; Cleanups - vkms: Use GEM object functions; Switch to SHMEM - vmwgfx: TTM-related changes; Inline ttm_bo_swapout_all() - xen: Use GEM object functions - xlnx: Use GEM object functions Signed-off-by: -
Anusha Srivatsa authored
Update the EHL PCI IDs from BSpec. Remove the invalid ones. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
- 03 Nov, 2020 1 commit
-
-
Jani Nikula authored
Signed-off-by:
-
- 01 Nov, 2020 1 commit
-
-
Linus Torvalds authored
-
