Rename the macros defined in wilc_wlan_if.h header to have clear
namespace. As convention used 'WILC_FW_' prefix for constants defined for
firmware and 'WILC_' prefix for driver constants.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Restructure the code to have a proper namespace for macro defined to
handle the security types. Move them as part of wilc_wlan_if.h header as
along with other macro defined for firmware.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clubbed mac status constants inside the enum constant and also added
'WILC_' prefix to have better namespace.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Moved sdio_cmd52 & sdio_cmd53 struct from wilc_wlan_if.h, as its used in
wilc_sdio.cfile.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unused macros and struct members in
host_interface.h header file.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of WLAN_PMKID_LEN macro provided by ieee80211.h header instead
of PMKID_LEN.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of ieee80211.h provided macros and removed the extra macro
defined for the same purpose.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat arguments in a few functions in gasket_page_table.c to better
follow linux kernel formatting standards.
Signed-off-by: Robert Deal <robert.edward.deal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After removing cfg_values member, cfg_values_lock that was used to protect
it can also be removed.
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

host_if_drv.cfg_values is a write only member, and can be removed
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Validate cfg parameters after being called by cfg80211 in set_wiphy_params
before scheduling the work executed in handle_cfg_param
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces around '*' to conform with kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use __func__ instead of hardcoded function name.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit adds pci device tree bindings for the Mt7621 pci controller.
This is a temporal file included in staging driver directory and will be
moved to its correct location when this driver gets out of staging.

Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function 'mt7621_pcie_init_ports' is never called in atomic context.
It calls mdelay() to busily wait, which is not necessary. mdelay()
can be replaced with msleep().
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some clocks bits related code is in driver probe function and can
perfectly be moved into 'mt7621_pcie_init_ports' function which is
a more accurate place for it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function 'mt7621_pcie_enable_ports' tries to enable all PCI ports.
To make it more readable the single port initialization part has
been factor out into a new 'mt7621_pcie_enable_port' function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Interrupt is being enabled in port initialization when the port phy
has not been initialized yet. Just enable the interrupt when the port
is being enabled which is a more accurate place for this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCIE_PORT_LINKUP is defined and can be used to check if link is up
for each controller. Use it instead of use a hardcode value.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver is using gpio control instead of each port PERST_N
bit. Use PERST_N bit of each port cleaning all the ugly
gpio code in driver probe function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of use hardcoded values when calling 'rt_sysc_m32' for enabling
and disabling RALINK_PCIE_CLK_GEN and RALINK_PCIE_CLK_GEN1 create
some preprocessor definitions.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are some hardcoded values in the process for enabling and
disabling some stuff inside 'mt7621_pcie_enable_ports' function.
Create some preprocessor definitions to make code more readable.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The RC FTS configuration is done using hardcoded registers
and bitshift operations. Make it a bit clean defining some
prepocessor definitions and simple macros.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make some function definition changes in order to get all the
functions in the code with the same style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a comment at the beggining which has no sense at all.
Remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reorder a bit register definitions and some values into
logical groups adding some comments for each group. Also
unify all of register to use 16 bit in definitions instead
of having some with 16 bits and some with 8 bits.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are some preprocessor definition which are not being used at
all. Remove them cleaning the code a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of just inline this code in the probe driver function factor
out a new 'mt7621_pcie_init_ports' function to achieve this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'pcie_link_status' is a global variable which is being used as a
mask to know which virtual bridges are or not enabled. Instead of
this extract a new 'mt7621_pcie_init_virtual_bridges' function where
a similar local variable is used for the same task. This allow us to
properly configure the virtual PCI-PCI bridges in configuration
registers of the mt7621 pci controller. For a correct initiation of
which is connected use 'enabled' field of 'mt7621_pcie_port' struct.
With this change driver probe function gets a bit cleaner and readable.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver probe function check for a bit in 'pcie_link_status' for
enabling the pcie port or not. Instead of this add 'enabled' field
in 'mt7621_pcie_port' structure and check its value to achieve this
inside a new 'mt7621_pcie_enable_ports' function. The offsets for
the correct port are derived from the slot of the port. This field
'enabled' is properly initilized in 'mt7621_pcie_init_port'. Also
depending of the number of ports enabled we have to properly init
its registers taking into account that we will use virtual bridges
from zero to num_slots_enabled as follows:
    - Only one enabled -> only enable virtual bridge 0.
    - Two enabled -> enable virtual bridges 0 and 1.
    - Three enabled -> enable virtual bridges 0, 1 and 2.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch script is complaining about the use of printk instead
of use more proper dev_* kernel functions. Replace all of them
removing warnings.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Chackpatch script is compalining about one comment which
is not following the kernel style. Fix it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are some pointer read and writes which can be replaced
properly using sysctl registers readed from device tree. Remap
sysctl registers and replace in proper places.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing system control registers address in pcie node of
the device tree.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename function 'mt7621_pcie_enable_port' with a name which is better
for what the function is really doing calling it 'mt7621_pcie_init_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move debug for the port N_FTS from driver probe function to the more
appropiate one 'mt7621_pcie_enable_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out a new function 'mt7621_enable_phy' for enabling the
pcie phy for each port and call it from 'mt7621_pcie_enable_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function 'bypass_pipe_rst' and 'set_phy_for_ssc' can be
written in a cleaner way. Instead of use comments to see which
bits are the ones which are being enabled add new macros with
that information using BIT and GENMASK kernel macros. Avoid the
use of set_pcie_phy which is kind of dark and use new macros also
resetting and adding bits using bitwise operators directly in the
code. Now these function are offset-based on the port to use them
cleaner in driver probe functio and improving readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reset bits related macros are in different parts. Reagroup
all of them together to  improve readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>