- 25 Jan, 2021 16 commits
-
-
Philipp Rosenberger authored
To resume normal operation after a total power loss (no or empty battery) the "Power-On Reset Override (PORO)" facility needs to be disabled. The register reset value sets the PORO enabled and the data sheet recommends setting it to disabled for normal operation. From what I've seen on the PCF2127 and PCF2129 there is no event generated at the interrupt pin (INT), as long the PORO bit is set. This behavior is not documented in the manual. Signed-off-by:
Philipp Rosenberger <p.rosenberger@kunbus.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210118085752.5759-2-p.rosenberger@kunbus.com
-
Dmitry Osipenko authored
TPS65910 is a PMIC MFD device and RTC is one of its functions. The wakeup-source DT property is specified for the parent MFD device and we need to use this property for the RTC in order to allow to use RTC alarm for waking up system from suspend by default, instead of requiring user to enable wakeup manually via sysfs. Tested-by:
Peter Geis <pgwipeout@gmail.com> Tested-by:
Matt Merhar <mattmerhar@protonmail.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20210119220653.677750-5-alexandre.belloni@bootlin.com
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
Alexandre Belloni authored
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by:
-
- 23 Jan, 2021 3 commits
-
-
Arnd Bergmann authored
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by:
Barry Song <baohua@kernel.org> Signed-off-by:
-
- 16 Jan, 2021 20 commits
-
-
Alexandre Belloni authored
Clear RTC_FEATURE_ALARM to signal that alarms are not available instead of having a supplementary struct rtc_class_ops without alarm callbacks. Signed-off-by:
-
Alexandre Belloni authored
Use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of changing the global struct rtc_class_ops, allowing to make it const. Signed-off-by:
-
Alexandre Belloni authored
Use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of changing the global struct rtc_class_ops, allowing to make it const. Signed-off-by:
-
Alexandre Belloni authored
Use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of changing the global struct rtc_class_ops, allowing to make it const. Signed-off-by:
-
Alexandre Belloni authored
Use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of changing the global struct rtc_class_ops, allowing to make it const. Signed-off-by:
-
Alexandre Belloni authored
Use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of changing the global struct rtc_class_ops, allowing to make it const. Signed-off-by:
-
Alexandre Belloni authored
Use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of changing the global struct rtc_class_ops, allowing to make it const. Signed-off-by:
-
Alexandre Belloni authored
Merge both struct rtc_class_ops in a single one and use RTC_FEATURE_ALARM to signal to the core whether alarms are available. Signed-off-by:
-
Alexandre Belloni authored
Merge both struct rtc_class_ops in a single one and use RTC_FEATURE_ALARM to signal to the core whether alarms are available. Signed-off-by:
-
Alexandre Belloni authored
Move the alarm callbacks in pcf85063_rtc_ops and use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of having a supplementary struct rtc_class_ops without alarm callbacks. Signed-off-by:
-
Alexandre Belloni authored
Move the alarm callbacks in pcf2127_rtc_ops and use RTC_FEATURE_ALARM to signal to the core whether alarms are available instead of having a supplementary struct rtc_class_ops without alarm callbacks. Signed-off-by:
-
Alexandre Belloni authored
Clear RTC_FEATURE_ALARM to signal that alarms are not available instead of having a supplementary struct rtc_class_ops without alarm callbacks. Signed-off-by:
-
Alexandre Belloni authored
Move the alarm callbacks in mv_rtc_ops and clear RTC_FEATURE_ALARM to signal that alarms are not available instead of having a supplementary struct rtc_class_ops. Signed-off-by:
-
Alexandre Belloni authored
Clear RTC_FEATURE_ALARM to signal that alarms are not available instead of having a supplementary struct rtc_class_ops with a NULL .set_alarm. Signed-off-by:
-
Alexandre Belloni authored
Clear RTC_FEATURE_ALARM to signal that alarms are not available instead of having a supplementary struct rtc_class_ops with a NULL .set_alarm. Signed-off-by:
-
Alexandre Belloni authored
Clear RTC_FEATURE_ALARM instead of setting set_alarm, read_alarm and alarm_irq_enable to NULL. Signed-off-by:
-
Alexandre Belloni authored
Introduce a bitfield to allow the drivers to announce the available features for an RTC. The main use case would be to better handle alarms, that could be present or not or have a minute resolution or may need a correct week day to be set. Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms are available instead of relying on the presence of ops->set_alarm. Signed-off-by:
-
Bartosz Golaszewski authored
This function can fail if regmap operations fail so check its return value in probe(). Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Bartosz Golaszewski authored
Use the managed variant of i2c_new_dummy_device() to shrink code and remove the goto label. We can drop the remove callback now too. Signed-off-by:
-
Bartosz Golaszewski authored
The rtc-s5m uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it. Fixes: 959df777 ("rtc: Enable compile testing for Maxim and Samsung drivers") Signed-off-by:
-
- 12 Jan, 2021 1 commit
-
-
Alexandre Belloni authored
It is a BCD RTC with 4 digits for the year. Signed-off-by:
-
