- 30 May, 2018 40 commits
-
-
Prashant Bhole authored
[ Upstream commit ddd00103 ] eBPF test fails due to verifier failure because log_buf is too small. Fixed by increasing log_buf size Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Olsa authored
[ Upstream commit fdf7c49c ] When we strip the perf binary, dwarf unwind test stop to work. The reason is that strip will remove static function symbols, which we need to check for unwind. This change will keep this test working in cases where the global symbols are put into dynamic symbol table, which is the case on x86. It still won't work on powerpc. Making those 5 local functions global, and adding 'test_dwarf_unwind__' to their names. Committer testing: Before: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : FAILED! # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 6590 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144 unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5) got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind unwind: '':ip = 0x4a50bb (0xa50bb) failed: got unresolved address 0xa50bb unwind failed test child finished with -1 ---- end ---- DWARF unwind: FAILED! # After: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : Ok # # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 7219 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144 unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044) got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7) got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468) got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8) got: bsearch 0x394d8, expecting bsearch unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1) got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3 unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b) got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2 unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b) got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1 unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605) got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind test child finished with 0 ---- end ---- DWARF unwind: Ok # Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180206181813.10943-17-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
[ Upstream commit e3ebaa46 ] Jin Yao reported memory corrupton in perf report with branch info used for stack trace: > Following command lines will cause perf crash. > perf record -j call -g -a <application> > perf report --branch-history > > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 *** > ======= Backtrace: ========= > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725] > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a] > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc] > perf[0x51b914] > perf(hist_entry_iter__add+0x1e5)[0x51f305] > perf[0x43cf01] > perf[0x4fa3bf] > perf[0x4fa923] > perf[0x4fd396] > perf[0x4f9614] > perf(perf_session__process_events+0x89e)[0x4fc38e] > perf(cmd_report+0x15d2)[0x43f202] > perf[0x4a059f] > perf(main+0x631)[0x427b71] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830] > perf(_start+0x29)[0x427d89] For the cumulative output, we allocate the he_cache array based on the --max-stack option value and populate it with data from 'callchain_cursor'. The --max-stack option value does not ensure now the limit for number of callchain_cursor nodes, so the cumulative iter code will allocate smaller array than it's actually needed and cause above corruption. I think the --max-stack limit does not apply here anyway, because we add callchain data as normal hist entries, while the --max-stack control the limit of single entry callchain depth. Using the callchain_cursor.nr as he_cache array count to fix this. Also removing struct hist_entry_iter::max_stack, because there's no longer any use for it. We need more fixes to ensure that the branch stack code follows properly the logic of --max-stack, which is not the case at the moment. Original-patch-by:
Jin Yao <yao.jin@linux.intel.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit ab6e9a99 ] The symbol search called by machine__find_kernel_symbol_by_name is using internally arch__compare_symbol_names function to compare 2 symbol names, because different archs have different ways of comparing symbols. Mostly for skipping '.' prefixes and similar. In test 1 when we try to find matching symbols in kallsyms and vmlinux, by address and by symbol name. When either is found we compare the pair symbol names by simple strcmp, which is not good enough for reasons explained in previous paragraph. On powerpc this can cause lockup, because even thought we found the pair, the compared names are different and don't match simple strcmp. Following code path is executed, that leads to lockup: - we find the pair in kallsyms by sym->start next_pair: - we compare the names and it fails - we find the pair by sym->name - the pair addresses match so we call goto next_pair because we assume the names match in this case Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Jin Yao authored
[ Upstream commit b40982e8 ] When we use perf report interactive annotate view, we can see the position of jump arrow is not correct. For example, 1. perf record -b ... 2. perf report 3. In interactive mode, select Annotate 'function' Percent│ IPC Cycle │ if (flag) 1.37 │0.4┌── 1 ↓ je 82 │ │ x += x / y + y / x; 0.00 │0.4│ 1310 movsd (%rsp),%xmm0 0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4 │0.4│ movsd 0x8(%rsp),%xmm1 │0.4│ movsd (%rsp),%xmm3 │0.4│ divsd %xmm4,%xmm0 0.00 │0.4│ 579 divsd %xmm3,%xmm1 │0.4│ movsd (%rsp),%xmm2 │0.4│ addsd %xmm1,%xmm0 │0.4│ addsd %xmm2,%xmm0 0.00 │0.4│ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.4└─→ 82: sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 The jump arrow in above example is not correct. It should add the width of IPC and Cycle. With this patch, the result is: Percent│ IPC Cycle │ if (flag) 1.37 │0.48 1 ┌──je 82 │ │ x += x / y + y / x; 0.00 │0.48 1310 │ movsd (%rsp),%xmm0 0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4 │0.48 │ movsd 0x8(%rsp),%xmm1 │0.48 │ movsd (%rsp),%xmm3 │0.48 │ divsd %xmm4,%xmm0 0.00 │0.48 579 │ divsd %xmm3,%xmm1 │0.48 │ movsd (%rsp),%xmm2 │0.48 │ addsd %xmm1,%xmm0 │0.48 │ addsd %xmm2,%xmm0 0.00 │0.48 │ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.48 82:└─→sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 Committer notes: Please note that only from LBRv5 (according to Jiri) onwards, i.e. >= Skylake is that we'll have the cycles counts in each branch record entry, so to see the Cycles and IPC columns, and be able to test this patch, one need a capable hardware. While applying this I first tested it on a Broadwell class machine and couldn't get those columns, will add code to the annotate browser to warn the user about that, i.e. you have branch records, but no cycles, use a more recent hardware to get the cycles and IPC columns. Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 0f19a038 ] Using Fedora 27 and latest Linux kernel the test case trace+probe_libc_inet_pton.sh fails again on s390. This time is the inlining of functions which does not match. After an update of the glibc (from 2.26-16 to 2.26-24) the output is different The expected output is: __inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) .... The actual output is: 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.061/0.061/0.061/0.000 ms 0.000 probe_libc:inet_pton:(3ffb2140448)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) ... Fix this by being less strict on 'inlined' verses library name and accept both Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180214070303.55757-1-tmricht@linux.vnet.ibm.comSigned-off-by:
-
Baoquan He authored
[ Upstream commit bee3204e ] Currently the kdump kernel becomes very slow if 'noapic' is specified. Normal kernel doesn't have this bug. Kernel parameter 'noapic' is used to disable IO-APIC in system for testing or special purpose. Here the root cause is that in kdump kernel LAPIC is disabled since commit: 522e6646 ("x86/apic: Disable I/O APIC before shutdown of the local APIC") In this case we need set up through-local-APIC on boot CPU in setup_local_APIC(). In normal kernel the legacy irq mode is enabled by the BIOS. If it is virtual wire mode, the local-APIC has been enabled and set as through-local-APIC. Though we fixed the regression introduced by commit 522e6646, to further improve robustness set up the through-local-APIC mode explicitly, do not rely on the default boot IRQ mode. Signed-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-7-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ørjan Eide authored
[ Upstream commit 57de50af ] When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Ørjan Eide <orjan.eide@arm.com> Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Joe Perches authored
[ Upstream commit db6775ca ] Using a period after a newline causes bad output. Fixes: 64b139f9 ("MIPS: OCTEON: irq: add CIB and other fixes") Signed-off-by:
Joe Perches <joe@perches.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17886/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Jake Moroni authored
[ Upstream commit 3021efb4 ] The ADVERTISED_Asym_Pause bit was being improperly set when both rx and tx pause were enabled. When rx and tx are both enabled, only the ADVERTISED_Pause bit is supposed to be set. Signed-off-by:
Jake Moroni <mail@jakemoroni.com> Acked-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Takeshi Kihara authored
[ Upstream commit b418c460 ] This patch fixes MOD_SEL1 bit20 and MOD_SEL2 bit20, bit21 pin assignment for SSI pins group. This is a correction to the incorrect implementation of MOD_SEL register pin assignment for R8A7796 SoC specification of R-Car Gen3 Hardware User's Manual Rev.0.51E or later. Fixes: f9aece73 ("pinctrl: sh-pfc: Initial R8A7796 PFC support") Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
-
Niklas Cassel authored
[ Upstream commit 13138de0 ] stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio() instead of rx_queue_routing(). This looks like a copy paste issue, since stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(), and both stmmac_mac_config_rx_queues_routing() and stmmac_mac_config_rx_queues_prio() are very similar in structure. Fixes: abe80fdc ("net: stmmac: RX queue routing configuration") Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Richard Guy Briggs authored
[ Upstream commit 23138ead ] If there is a memory allocation error when trying to change an audit kernel feature value, the ignored allocation error will trigger a NULL pointer dereference oops on subsequent use of that pointer. Return instead. Passes audit-testsuite. See: https://github.com/linux-audit/audit-kernel/issues/76Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> [PM: not necessary (other funcs check for NULL), but a good practice] Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit dbdd0f58 ] There is a problem with PCMCIA system resume callbacks with respect to suspend-to-idle in which the ->suspend_noirq() callback may be invoked after the ->resume_noirq() one without resuming the system entirely in some cases. This doesn't work for PCMCIA because of the lack of symmetry between its system suspend and system resume "noirq" callbacks. The system resume handling in PCMCIA is split between socket_early_resume() and socket_late_resume() which are called in different phases of system resume and both need to run for socket_suspend() (invoked by the system suspend "noirq" callback) to work. Specifically, socket_suspend() returns an error when called after socket_early_resume() without socket_late_resume(), so if the suspend-to-idle core detects a spurious wakeup event and attempts to put the system back to sleep, that is aborted by the error coming from socket_suspend(). Avoid that by using a new socket state flag, SOCKET_IN_RESUME, to indicate that socket_early_resume() has already run for the socket in which case socket_suspend() will do minimum handling and return 0. This change has been tested on my venerable Toshiba Portege R500 (which is where the problem has been discovered in the first place), but admittedly I have no PCMCIA cards to test along with the socket itself. Fixes: 33e4f80e (ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [linux@dominikbrodowski.net: follow same codepaths for both suspend variants; call ->suspend()] Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Henry Zhang authored
[ Upstream commit 1a012cb2 ] BCM2835 ARM Peripherals doc shows gpio pins 4, 5, 6, 12 and 13 carry altenate function, ALT5 for ARM JTAG Fixes: 21ff8439 ("ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.") Signed-off-by:
Henry Zhang <henryzhang62@gmail.com> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 79c81fac ] Since 517e7a15 ("ASoC: bcm2835: move to use the clock framework") the bcm2835-i2s requires a clock as DT property. Unfortunately the necessary DT change has never been applied. While we are at it also fix the first PCM register range to cover the PCM_GRAY register. Fixes: 517e7a15 ("ASoC: bcm2835: move to use the clock framework") Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
-
Ladislav Michl authored
[ Upstream commit dde5953f ] Temperature is measured in tenths of degree Celsius. Fixes: 085bc24d ("Add LTC2941/LTC2943 Battery Gauge Driver") Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit a94cf2a6 ] It appears that the single port Ether controllers having TSU (like SH7734/ R8A7740) need the same kind of treating in sh_eth_tsu_init() as R7S72100 currently has -- they also don't have the TSU registers related e.g. to passing the frames between ports. Add the 'sh_eth_cpu_data::dual_port' flag and use it as a new criterion for taking a "short path" in the TSU init sequence in order to avoid writing to the non-existent registers... Fixes: f0e81fec ("net: sh_eth: Add support SH7734") Fixes: 73a0d907 ("net: sh_eth: add support R8A7740") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by:
-
Jacob Keller authored
[ Upstream commit 6704a3ab ] On hardware which supports timestamping all packets, the timestamps are recorded in the packet buffer, and the driver no longer uses or reads the registers. This makes the logic for checking and clearing Rx timestamp hangs meaningless. If we run the ixgbe_ptp_rx_hang() function in this case, then the driver will continuously spam the log output with "Clearing Rx timestamp hang". These messages are spurious, and confusing to end users. The original code in commit a9763f3c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03) did have a flag PTP_RX_TIMESTAMP_IN_REGISTER which was intended to be used to avoid the Rx timestamp hang check, however it did not actually check the flag before calling the function. Do so now in order to stop the checks and prevent the spurious log messages. Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03) Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 116e5258 ] Currently when UDF filesystem is recorded without uid / gid (ids are set to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid= and gid= mount options. In such case filesystem could not be modified in any way as VFS refuses to modify files with invalid ids (even by root). This is confusing to users and not very useful default since such media mode is generally used for removable media. Use overflow[ug]id instead so that at least root can modify the filesystem. Reported-by:
Steve Kenton <skenton@ou.edu> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Thomas Vincent-Cross authored
[ Upstream commit 832e4e1f ] Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679Signed-off-by:
Thomas Vincent-Cross <me@tvc.id.au> Signed-off-by:
Bjorn Helgaas <helgaas@kernel.org> Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 120d75ec ] An issue in the code mapping the skb fragments into scatter-gather frames was evidentiated by netperf TCP_SENDFILE tests. The size was set wrong for all fragments but the first, affecting the transmission of any skb with more than one fragment. Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit b24b6478 ] Ideally the de-allocation of resources should happen in the exact opposite order in which they were allocated. It helps maintain the code in long term, even if nothing really breaks with incorrect ordering. That wasn't followed in cpufreq_online() and it has some inconsistencies. For example, the symlinks were created from within the locked region while they are removed only after putting the locks. Also ->exit() should have been called only after the symlinks are removed and the lock is dropped, as that was the case when ->init() was first called. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject ] Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 15d2ee42 ] A dma_wmb() is used to guarantee the ordering, with respect to other writes, to cache coherent DMA memory. There is a dma_wmb() in prepare_tx_desc()/prepare_tso_tx_desc() which ensures that TDES0/1/2 is written before TDES3 (which contains the own bit), for First Desc. However, in the rare case that MSS changes, there will be a MSS context descriptor in front of the regular DMA descriptors: <MSS desc> <- DMA Next Descriptor <First Desc> <desc n> <Last Desc> Thus, for this special case, we need a dma_wmb() after prepare_tso_tx_desc()/before writing the own bit to the MSS desc, so that we flush the write to TDES3 for First Desc, in order to ensure that the MSS descriptor is the last descriptor to set the own bit. Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit a6b25da5 ] According to Documentation/memory-barriers.txt, we need to use a dma_rmb() after reading the status/own bit, to ensure that all descriptor fields are read after reading the own bit. This way, we ensure that the DMA engine is done with the DMA descriptor before we read the other descriptor fields, e.g. reading the tx hardware timestamp (if PTP is enabled). Signed-off-by:
-
Monk Liu authored
[ Upstream commit dbf79765 ] issue: sometime GFX/MM ib test hit timeout under SRIOV env, root cause is that engine doesn't come back soon enough so the current IB test considered as timed out. fix: for SRIOV GFX IB test wait time need to be expanded a lot during SRIOV runtimei mode since it couldn't really begin before GFX engine come back. for SRIOV MM IB test it always need more time since MM scheduling is not go together with GFX engine, it is controled by h/w MM scheduler so no matter runtime or exclusive mode MM IB test always need more time. v2: use ring type instead of idx to judge Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Monk Liu authored
[ Upstream commit 9f0178fb ] otherwise there will be DMAR reading error comes out from CP since GFX is still alive and CPC's WPTR_POLL is still enabled, which would lead to DMAR read error. fix: we can hault CPG after hw_fini, but cannot halt CPC becaues KIQ stil need to be alive to let RLCV invoke, but its WPTR_POLL could be disabled. Signed-off-by:
-
Ravikumar Kattekola authored
[ Upstream commit f4aa1bd5 ] Correct vpo_sd_1v8_3v3 regulator max voltage to 3.3V Fixes: 9868bc585ae2 ("ARM: dts: Add support for dra718-evm") Signed-off-by:
Ravikumar Kattekola <rk@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit 215003b4 ] There's no reason to delay initialization of most of the driver (such as mapping memory I/O, getting clocks or enabling runtime PM) to the component master bind handler. This additionally fixes a real PM issue caused enabling runtime PM in the bind handler. The bind handler performs the following sequence of PM operations: pm_runtime_enable(dev); pm_runtime_get_sync(dev); ... (access the hardware to read the device revision) ... pm_runtime_put_sync(dev); If a failure occurs at this point, the error path calls pm_runtime_disable() to balance the pm_runtime_enable() call. To understand the problem, it should be noted that the bind handler is called when one of the component registers itself, which happens in the component's probe handler. Furthermore, as the components are children of the DSS, the device core calls pm_runtime_get_sync() on the DSS platform device before calling the component's probe handler. This increases the DSS power usage count but doesn't runtime resume the device, as runtime PM is disabled at that point. The bind handler is thus called with runtime PM disabled, with the device runtime suspended, but with the power usage count larger than 0. The pm_runtime_get_sync() call will thus further increase the power usage count and runtime resume the device. The pm_runtime_put_sync() handler will decrease the power usage count to a non-zero value and will thus not suspend the device. Finally, the pm_runtime_disable() call will disable runtime PM, preventing the pm_runtime_put() call in the device core from runtime suspending the device. The DSS device is thus left powered on. To fix this, move the initialization code from the bind handler to the probe handler. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 48d163b1 ] When Linux is master of BAM, it can directly read registers to know number of supported channels, however when its remotely controlled reading these registers would trigger a crash if the BAM is not yet initialized or powered up on the remote side. This patch allows driver to read num-channels and num-ees from Device Tree for remotely controlled BAM. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Cornelia Huck authored
[ Upstream commit 9851bc77 ] vfio-ccw only supports command mode for channel programs, not transport mode. User space is supposed to already take care of that and pass us command-mode ORBs only, but better make sure and return an error to the caller instead of trying to process tcws as ccws. Reviewed-by:
Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Acked-by:
Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 7e065fb9 ] Add missing pin group uart5nocts (all pins except cts), which has been supported by the artpec6 pinctrl driver since its initial submission. Fixes: 00df0582 ("pinctrl: Add pincontrol driver for ARTPEC-6 SoC") Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Richard Fitzgerald authored
[ Upstream commit b89405b6 ] When dt_to_map_one_config() is called with a pinctrl_dev passed in, it should only be using this if the node being looked up is a hog. The code was always using the passed pinctrl_dev without checking whether the dt node referred to it. A pin controller can have pinctrl-n dependencies on other pin controllers in these cases: - the pin controller hardware is external, for example I2C, so needs other pin controller(s) to be setup to communicate with the hardware device. - it is a child of a composite MFD so its of_node is shared with the parent MFD and other children of that MFD. Any part of that MFD could have dependencies on other pin controllers. Because of this, dt_to_map_one_config() can't assume that if it has a pinctrl_dev passed in then the node it looks up must be a hog. It could be a reference to some other pin controller. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by:
-
lionel.debieve@st.com authored
[ Upstream commit 326ed382 ] Avoid issue when probing the RNG without reset if bad status has been detected previously Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 3c829f47 ] If devm_reset_control_get_exclusive() fails, asm9260_wdt_probe() returns immediately. But clks has been already enabled at that point, so it is required to disable them or to move the code around. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit e8588e26 ] rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 3e081628 ] This patch fixes an issue that a race condition happens between a client driver and the rcar-dmac driver: - The rcar_dmac_isr_transfer_end() is called. - The done list appears, and desc.running is the next active list. - rcar_dmac_chan_get_residue() is called by a client driver before rcar_dmac_isr_channel_thread() is called. - The rcar_dmac_chan_get_residue() will not find any descriptors. - And, the following WARNING happens: WARN(1, "No descriptor for cookie!"); The sh-sci driver with HSCIF (921,600bps) on R-Car H3 can cause this situation. So, this patch checks the done lists in rcar_dmac_chan_get_residue() and returns zero if the done lists has the argument cookie. Tested-by:
Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Qi Hou authored
[ Upstream commit a3ca8312 ] When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by:
Frank Mori Hess <fmh6jj@gmail.com> Tested-by:
Qi Hou <qi.hou@windriver.com> Signed-off-by:
-
Ming Lei authored
[ Upstream commit 66231ad3 ] On ARM64, the default page size has been 64K on some distributions, and we should allow ARM64 people to play null_blk. This patch fixes the issue by extend page bitmap size for supporting other non-4KB PAGE_SIZE. Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Cc: Shaohua Li <shli@kernel.org> Cc: Kyungchan Koh <kkc6196@fb.com>, Cc: weiping zhang <zhangweiping@didichuxing.com> Cc: Yi Zhang <yi.zhang@redhat.com> Reported-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
