Modify the common SIM header for all ColdFire CPU's to incldue the
new 5282 ColdFire defines.

Create header definitions file to support the ColdFire 5282 CPU.
Unfortunately its register layout and setup is quite different
to previous ColdFire CPU family members.

Start up code for the M5282C3 Motorola ColdFire 5282 evaluation board.

New architecture and board for the m68knommu architecture branch, though
it is not very different to most existing ColdFire eval boards.

This creates specific ColdFire/5282 configuration initialization.

Add ColdFire 5282 support to common ColdFire header file.

Add a function to allow checking if the timer interrupt is pending for
the m68knommu/5206 CPU.  This is used by the architecture timer code for
microsecond accurate time calculations.

Add a function to allow checking if the timer interrupt is pending for
the m68knommu/5249 CPU.  This is used by the architecture timer code for
microsecond accurate time calculations.

Add a function to allow checking if the timer interrupt is pending for
the m68knommu/5206e CPU.  This is used by the architecture timer code
for microsecond accurate time calculations.

Obvious strlcpy conversions in arch/*. In fact, mips and mips64 had an
actual bug in sys_sysmips(). Confirmed with Keith Wesolowski.

So here it is, easy split support for md and dm. Neil, the changes over
your version are merely:

- Make a global bio split pool instead of requring device setup of one.
  Will waste 8 * sizeof(struct bio_pair) of RAM, but... For 2.6 at least
  it has to be a core functionality.

- Various style changes to follow the kernel guide lines.

Add a function to allow checking if the timer interrupt is pending for
the m68knommu/5407 CPU.  This is used by the architecture timer code for
microsecond accurate time calculations.

Add a function to allow checking if the timer interrupt is pending for
the m68knommu/5272 CPU.  This is used by the architecture timer code for
microsecond accurate time calculations.

Add a function to allow checking if the timer interrupt is pending for
the m68knommu/5307 CPU.  This is used by the architecture timer code for
microsecond accurate time calculations.

This adds offset calculcation to the m68knommu/ColdFire timers.  Allows
microsecond accuracy for gettimeofday and friends.

This patch adds appropriate locking around updates of the xtime
structure for the m68knommu ColdFire architecture timers.

This patch updates the defconfig for the m68knommu architecture.

This patch does a couple of things to the m68knommu common linker
script:
 - adds support for the 5282 ColdFire CPU
 - fixes broken setup for the Dragon Engine board

Add dummy VMALLOC_START and VMALLOC_END defines to m68knommu architectures.
Some code in the proc filesystem breaks without them now.

(i) The prototypes for free_vfsmnt(), alloc_vfsmnt(), do_kern_mount()
    so far occurred in several individual c files.  Now they are in
    <linux/mount.h>.

(ii) do_kern_mount() has a third argument name that is typically a
     constant.  It is called with "rootfs", "nfsd", type->name,
     "capifs", "usbdevfs", "binfmt_misc" etc.  So, it should have a
     prototype that expresses this:

	do_kern_mount(const char *fstype, int flags, const char *name, void *data);

This makes the ugly cast

-       return do_kern_mount(type->name, 0, (char *)type->name, NULL);
+       return do_kern_mount(type->name, 0, type->name, NULL);

go away. Now do_kern_mount() calls type->get_sb(), so also get_sb()
must have a const third argument. That is what the patch below does.

If I am not mistaken, precisely two filesystems do not treat this
argument as a constant, namely afs and cifs. A separate patch
gives some cleanup there.

This fixes some ColdFire 5407 cache bogosity.  Previous code was pushing
all cache lines and the invalidating all of the cache.  The push should
be enough, and now with underlying fixes the the cache setup registers
it is.  Removed the whole invalidate cycle.

Original patch cam from Allessandro Rubini.

Correct the wrong cache setup used on the MOTOROLA 5407 based board.
Specifically it enables precise exception mode and write buffering.

Original patch from Alessendra Rubini.

Correct the wrong cache setup used on the CLEOPATRA 5407 based board.
Specifically it enables precise exception mode and write buffering.

Original patch from Alessendra Rubini.

into home.transmeta.com:/home/torvalds/v2.5/linux

This patch takes out the MOD_INC/DEC_USE_COUNT in the airport (Apple
wireless ethernet) driver.  The driver already does SET_MODULE_OWNER
on the netdevice, so the MOD_INC/DEC_USE_COUNT are unnecessary and
just cause warnings.

This patch fixes ppp_synctty.c (used for doing PPP over some synchronous
serial HDLC links) so that it sets the owner field of the tty line
discipline it exports, rather than using MOD_INC/DEC_USE_COUNT.  This
is more or less from Stephen Hemminger.

Please apply.

Thanks,
Paul.

* Cleanup ethtool/mii_ioctl sets of speed/duplex/autoneg by
  stop/set/start driver to ensure sets stick.  Must hold
  xmit_lock around stop/start.

into redhat.com:/garz/repo/net-drivers-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

into redhat.com:/garz/repo/irda-2.5

This patch fixes the build of drivers/ide/ppc/pmac.c.

While going through sound/ for strncpy replacing, I came across this
routine:

/* return the (first) queue matching with the specified name */
queue_t *snd_seq_queue_find_name(char *name)
{
        int i;
        queue_t *q;

        for (i = 0; i < SNDRV_SEQ_MAX_QUEUES; i++) {
                if ((q = queueptr(i)) != NULL) {
                        if (strncpy(q->name, name, sizeof(q->name)) == 0)
                                return q;
                        queuefree(q);
                }
        }
        return NULL;
}


I'm _really_ sure that they meant to use strncmp() here instead.

Like this.

A couple of updates for the non-MMU memory managment code:

 - declare the overcommit variables
 - return a real vma pointer from get_user_pages (it is used by some code)
 - correct args to vmap()

Use strlcpy in root_dev_setup()