1. 30 Oct, 2019 3 commits
    • Michael Ellerman's avatar
      powerpc: Add build-time check of ptrace PT_xx defines · b9e0805a
      Michael Ellerman authored
      As part of the uapi we export a lot of PT_xx defines for each register
      in struct pt_regs. These are expressed as an index from gpr[0], in
      units of unsigned long.
      
      Currently there's nothing tying the values of those defines to the
      actual layout of the struct.
      
      But we *don't* want to change the uapi defines to derive the PT_xx
      values based on the layout of the struct, those values are ABI and
      must never change.
      
      Instead we want to do the reverse, make sure that the layout of the
      struct never changes vs the PT_xx defines. So add build time checks of
      that.
      
      This probably seems paranoid, but at least once in the past someone
      has sent a patch that would have broken the ABI if it hadn't been
      spotted. Although it probably would have been detected via testing,
      it's preferable to just quash any issues at the source.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Link: https://lore.kernel.org/r/20191030111231.22720-1-mpe@ellerman.id.au
      b9e0805a
    • Mathieu Malaterre's avatar
      powerpc/ptrace: Add prototype for function pt_regs_check · 5c74f799
      Mathieu Malaterre authored
      `pt_regs_check` is a dummy function, its purpose is to break the build
      if struct pt_regs and struct user_pt_regs don't match.
      
      This function has no functionnal purpose, and will get eliminated at
      link time or after init depending on CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
      
      This commit adds a prototype to fix warning at W=1:
      
        arch/powerpc/kernel/ptrace.c:3339:13: error: no previous prototype for ‘pt_regs_check’ [-Werror=missing-prototypes]
      Suggested-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
      Signed-off-by: default avatarMathieu Malaterre <malat@debian.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Link: https://lore.kernel.org/r/20181208154624.6504-1-malat@debian.org
      5c74f799
    • Michael Ellerman's avatar
      selftests/powerpc: Add a test of spectre_v2 mitigations · c790c3d2
      Michael Ellerman authored
      This test uses the PMU to count branch prediction hits/misses for a
      known loop, and compare the result to the reported spectre v2
      mitigation.
      
      This gives us a way of sanity checking that the reported mitigation is
      actually in effect.
      
      Sample output for some cases, eg:
      
        Power9:
          sysfs reports: 'Vulnerable'
           PM_BR_PRED_CCACHE: result        368 running/enabled 5792777124
          PM_BR_MPRED_CCACHE: result        319 running/enabled 5792775546
           PM_BR_PRED_PCACHE: result 2147483281 running/enabled 5792773128
          PM_BR_MPRED_PCACHE: result  213604201 running/enabled 5792771640
          Miss percent 9 %
          OK - Measured branch prediction rates match reported spectre v2 mitigation.
      
          sysfs reports: 'Mitigation: Indirect branch serialisation (kernel only)'
           PM_BR_PRED_CCACHE: result        895 running/enabled 5780320920
          PM_BR_MPRED_CCACHE: result        822 running/enabled 5780312414
           PM_BR_PRED_PCACHE: result 2147482754 running/enabled 5780308836
          PM_BR_MPRED_PCACHE: result  213639731 running/enabled 5780307912
          Miss percent 9 %
          OK - Measured branch prediction rates match reported spectre v2 mitigation.
      
          sysfs reports: 'Mitigation: Indirect branch cache disabled'
           PM_BR_PRED_CCACHE: result 2147483649 running/enabled 20540186160
          PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 20540180056
           PM_BR_PRED_PCACHE: result          0 running/enabled 20540176090
          PM_BR_MPRED_PCACHE: result          0 running/enabled 20540174182
          Miss percent 100 %
          OK - Measured branch prediction rates match reported spectre v2 mitigation.
      
        Power8:
          sysfs reports: 'Vulnerable'
           PM_BR_PRED_CCACHE: result 2147483649 running/enabled 3505888142
          PM_BR_MPRED_CCACHE: result          9 running/enabled 3505882788
          Miss percent 0 %
          OK - Measured branch prediction rates match reported spectre v2 mitigation.
      
          sysfs reports: 'Mitigation: Indirect branch cache disabled'
           PM_BR_PRED_CCACHE: result 2147483649 running/enabled 16931421988
          PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 16931416478
          Miss percent 100 %
          OK - Measured branch prediction rates match reported spectre v2 mitigation.
          success: spectre_v2
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Link: https://lore.kernel.org/r/20190520105520.22274-1-mpe@ellerman.id.au
      c790c3d2
  2. 29 Oct, 2019 1 commit
    • Michael Ellerman's avatar
      selftests/powerpc: Fixup clobbers for TM tests · a02cbc7f
      Michael Ellerman authored
      Some of our TM (Transactional Memory) tests, list "r1" (the stack
      pointer) as a clobbered register.
      
      GCC >= 9 doesn't accept this, and the build breaks:
      
        ptrace-tm-spd-tar.c: In function 'tm_spd_tar':
        ptrace-tm-spd-tar.c:31:2: error: listing the stack pointer register 'r1' in a clobber list is deprecated [-Werror=deprecated]
           31 |  asm __volatile__(
              |  ^~~
        ptrace-tm-spd-tar.c:31:2: note: the value of the stack pointer after an 'asm' statement must be the same as it was before the statement
      
      We do have some fairly large inline asm blocks in these tests, and
      some of them do change the value of r1. However they should all return
      to C with the value in r1 restored, so I think it's legitimate to say
      r1 is not clobbered.
      
      As Segher points out, the r1 clobbers may have been added because of
      the use of `or 1,1,1`, however that doesn't actually clobber r1.
      
      Segher also points out that some of these tests do clobber LR, because
      they call functions, and that is not listed in the clobbers, so add
      that where appropriate.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Link: https://lore.kernel.org/r/20191029095324.14669-1-mpe@ellerman.id.au
      a02cbc7f
  3. 28 Oct, 2019 9 commits
  4. 24 Oct, 2019 1 commit
  5. 13 Oct, 2019 1 commit
  6. 11 Oct, 2019 7 commits
  7. 10 Oct, 2019 1 commit
  8. 09 Oct, 2019 4 commits
  9. 06 Oct, 2019 4 commits
    • Linus Torvalds's avatar
      Linux 5.4-rc2 · da0c9ea1
      Linus Torvalds authored
      da0c9ea1
    • Linus Torvalds's avatar
      elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings · b212921b
      Linus Torvalds authored
      In commit 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") we
      changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
      executable mappings.
      
      Then, people reported that it broke some binaries that had overlapping
      segments from the same file, and commit ad55eac7 ("elf: enforce
      MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
      overlaying elf segment cases.  But only some - despite the summary line
      of that commit, it only did it when it also does a temporary brk vma for
      one obvious overlapping case.
      
      Now Russell King reports another overlapping case with old 32-bit x86
      binaries, which doesn't trigger that limited case.  End result: we had
      better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.
      
      Yes, it's a sign of old binaries generated with old tool-chains, but we
      do pride ourselves on not breaking existing setups.
      
      This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
      and the old load_elf_library() use-cases, because nobody has reported
      breakage for those. Yet.
      
      Note that in all the cases seen so far, the overlapping elf sections
      seem to be just re-mapping of the same executable with different section
      attributes.  We could possibly introduce a new MAP_FIXED_NOFILECHANGE
      flag or similar, which acts like NOREPLACE, but allows just remapping
      the same executable file using different protection flags.
      
      It's not clear that would make a huge difference to anything, but if
      people really hate that "elf remaps over previous maps" behavior, maybe
      at least a more limited form of remapping would alleviate some concerns.
      
      Alternatively, we should take a look at our elf_map() logic to see if we
      end up not mapping things properly the first time.
      
      In the meantime, this is the minimal "don't do that then" patch while
      people hopefully think about it more.
      Reported-by: default avatarRussell King <linux@armlinux.org.uk>
      Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map")
      Fixes: ad55eac7 ("elf: enforce  MAP_FIXED on overlaying elf segments")
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Kees Cook <keescook@chromium.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b212921b
    • Linus Torvalds's avatar
      Merge tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping · 7cdb85df
      Linus Torvalds authored
      Pull dma-mapping regression fix from Christoph Hellwig:
       "Revert an incorret hunk from a patch that caused problems on various
        arm boards (Andrey Smirnov)"
      
      * tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping:
        dma-mapping: fix false positive warnings in dma_common_free_remap()
      7cdb85df
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc · 43b815c6
      Linus Torvalds authored
      Pull ARM SoC fixes from Olof Johansson:
       "A few fixes this time around:
      
         - Fixup of some clock specifications for DRA7 (device-tree fix)
      
         - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
           warnings at boot
      
         - A few more minor fixups for OMAPs, most around display
      
         - Enable STM32 QSPI as =y since their rootfs sometimes comes from
           there
      
         - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool
      
         - Fix of thermal zone definition for ux500 (5.4 regression)"
      
      * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
        ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
        ARM: dts: ux500: Fix up the CPU thermal zone
        arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
        ARM: dts: am4372: Set memory bandwidth limit for DISPC
        ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
        ARM: OMAP2+: Add missing LCDC midlemode for am335x
        ARM: OMAP2+: Fix missing reset done flag for am3 and am43
        ARM: dts: Fix gpio0 flags for am335x-icev2
        ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
        ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
        DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
        ARM: dts: Fix wrong clocks for dra7 mcasp
        clk: ti: dra7: Fix mcasp8 clock bits
      43b815c6
  10. 05 Oct, 2019 9 commits
    • Linus Torvalds's avatar
      Merge tag 'kbuild-fixes-v5.4' of... · 2d00aee2
      Linus Torvalds authored
      Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
      
      Pull Kbuild fixes from Masahiro Yamada:
      
       - remove unneeded ar-option and KBUILD_ARFLAGS
      
       - remove long-deprecated SUBDIRS
      
       - fix modpost to suppress false-positive warnings for UML builds
      
       - fix namespace.pl to handle relative paths to ${objtree}, ${srctree}
      
       - make setlocalversion work for /bin/sh
      
       - make header archive reproducible
      
       - fix some Makefiles and documents
      
      * tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
        kheaders: make headers archive reproducible
        kbuild: update compile-test header list for v5.4-rc2
        kbuild: two minor updates for Documentation/kbuild/modules.rst
        scripts/setlocalversion: clear local variable to make it work for sh
        namespace: fix namespace.pl script to support relative paths
        video/logo: do not generate unneeded logo C files
        video/logo: remove unneeded *.o pattern from clean-files
        integrity: remove pointless subdir-$(CONFIG_...)
        integrity: remove unneeded, broken attempt to add -fshort-wchar
        modpost: fix static EXPORT_SYMBOL warnings for UML build
        kbuild: correct formatting of header in kbuild module docs
        kbuild: remove SUBDIRS support
        kbuild: remove ar-option and KBUILD_ARFLAGS
      2d00aee2
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 126195c9
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "Twelve patches mostly small but obvious fixes or cosmetic but small
        updates"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: qla2xxx: Fix Nport ID display value
        scsi: qla2xxx: Fix N2N link up fail
        scsi: qla2xxx: Fix N2N link reset
        scsi: qla2xxx: Optimize NPIV tear down process
        scsi: qla2xxx: Fix stale mem access on driver unload
        scsi: qla2xxx: Fix unbound sleep in fcport delete path.
        scsi: qla2xxx: Silence fwdump template message
        scsi: hisi_sas: Make three functions static
        scsi: megaraid: disable device when probe failed after enabled device
        scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
        scsi: qedf: Remove always false 'tmp_prio < 0' statement
        scsi: ufs: skip shutdown if hba is not powered
        scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
      126195c9
    • Linus Torvalds's avatar
      Merge branch 'readdir' (readdir speedup and sanity checking) · 4f11918a
      Linus Torvalds authored
      This makes getdents() and getdents64() do sanity checking on the
      pathname that it gives to user space.  And to mitigate the performance
      impact of that, it first cleans up the way it does the user copying, so
      that the code avoids doing the SMAP/PAN updates between each part of the
      dirent structure write.
      
      I really wanted to do this during the merge window, but didn't have
      time.  The conversion of filldir to unsafe_put_user() is something I've
      had around for years now in a private branch, but the extra pathname
      checking finally made me clean it up to the point where it is mergable.
      
      It's worth noting that the filename validity checking really should be a
      bit smarter: it would be much better to delay the error reporting until
      the end of the readdir, so that non-corrupted filenames are still
      returned.  But that involves bigger changes, so let's see if anybody
      actually hits the corrupt directory entry case before worrying about it
      further.
      
      * branch 'readdir':
        Make filldir[64]() verify the directory entry filename is valid
        Convert filldir[64]() from __put_user() to unsafe_put_user()
      4f11918a
    • Linus Torvalds's avatar
      Make filldir[64]() verify the directory entry filename is valid · 8a23eb80
      Linus Torvalds authored
      This has been discussed several times, and now filesystem people are
      talking about doing it individually at the filesystem layer, so head
      that off at the pass and just do it in getdents{64}().
      
      This is partially based on a patch by Jann Horn, but checks for NUL
      bytes as well, and somewhat simplified.
      
      There's also commentary about how it might be better if invalid names
      due to filesystem corruption don't cause an immediate failure, but only
      an error at the end of the readdir(), so that people can still see the
      filenames that are ok.
      
      There's also been discussion about just how much POSIX strictly speaking
      requires this since it's about filesystem corruption.  It's really more
      "protect user space from bad behavior" as pointed out by Jann.  But
      since Eric Biederman looked up the POSIX wording, here it is for context:
      
       "From readdir:
      
         The readdir() function shall return a pointer to a structure
         representing the directory entry at the current position in the
         directory stream specified by the argument dirp, and position the
         directory stream at the next entry. It shall return a null pointer
         upon reaching the end of the directory stream. The structure dirent
         defined in the <dirent.h> header describes a directory entry.
      
        From definitions:
      
         3.129 Directory Entry (or Link)
      
         An object that associates a filename with a file. Several directory
         entries can associate names with the same file.
      
        ...
      
         3.169 Filename
      
         A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
         characters composing the name may be selected from the set of all
         character values excluding the slash character and the null byte. The
         filenames dot and dot-dot have special meaning. A filename is
         sometimes referred to as a 'pathname component'."
      
      Note that I didn't bother adding the checks to any legacy interfaces
      that nobody uses.
      
      Also note that if this ends up being noticeable as a performance
      regression, we can fix that to do a much more optimized model that
      checks for both NUL and '/' at the same time one word at a time.
      
      We haven't really tended to optimize 'memchr()', and it only checks for
      one pattern at a time anyway, and we really _should_ check for NUL too
      (but see the comment about "soft errors" in the code about why it
      currently only checks for '/')
      
      See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
      lookup code looks for pathname terminating characters in parallel.
      
      Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Jann Horn <jannh@google.com>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8a23eb80
    • Linus Torvalds's avatar
      Convert filldir[64]() from __put_user() to unsafe_put_user() · 9f79b78e
      Linus Torvalds authored
      We really should avoid the "__{get,put}_user()" functions entirely,
      because they can easily be mis-used and the original intent of being
      used for simple direct user accesses no longer holds in a post-SMAP/PAN
      world.
      
      Manually optimizing away the user access range check makes no sense any
      more, when the range check is generally much cheaper than the "enable
      user accesses" code that the __{get,put}_user() functions still need.
      
      So instead of __put_user(), use the unsafe_put_user() interface with
      user_access_{begin,end}() that really does generate better code these
      days, and which is generally a nicer interface.  Under some loads, the
      multiple user writes that filldir() does are actually quite noticeable.
      
      This also makes the dirent name copy use unsafe_put_user() with a couple
      of macros.  We do not want to make function calls with SMAP/PAN
      disabled, and the code this generates is quite good when the
      architecture uses "asm goto" for unsafe_put_user() like x86 does.
      
      Note that this doesn't bother with the legacy cases.  Nobody should use
      them anyway, so performance doesn't really matter there.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9f79b78e
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 9819a30c
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.
      
       2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
          Dumazet.
      
       3) txq null deref in mac80211, from Miaoqing Pan.
      
       4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.
      
       5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.
      
       6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.
      
       7) Various xgmac fixes in stmmac driver from Jose Abreu.
      
       8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
          Michal Kubecek.
      
       9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.
      
      10) Fix sleep while atomic in sja1105, from Vladimir Oltean.
      
      11) Suspend/resume deadlock in stmmac, from Thierry Reding.
      
      12) Various UDP GSO fixes from Josh Hunt.
      
      13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
          Dumazet.
      
      14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.
      
      15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
        selftests/net: add nettest to .gitignore
        net: qlogic: Fix memory leak in ql_alloc_large_buffers
        nfc: fix memory leak in llcp_sock_bind()
        sch_dsmark: fix potential NULL deref in dsmark_init()
        net: phy: at803x: use operating parameters from PHY-specific status
        net: phy: extract pause mode
        net: phy: extract link partner advertisement reading
        net: phy: fix write to mii-ctrl1000 register
        ipv6: Handle missing host route in __ipv6_ifa_notify
        net: phy: allow for reset line to be tied to a sleepy GPIO controller
        net: ipv4: avoid mixed n_redirects and rate_tokens usage
        r8152: Set macpassthru in reset_resume callback
        cxgb4:Fix out-of-bounds MSI-X info array access
        Revert "ipv6: Handle race in addrconf_dad_work"
        net: make sock_prot_memory_pressure() return "const char *"
        rxrpc: Fix rxrpc_recvmsg tracepoint
        qmi_wwan: add support for Cinterion CLS8 devices
        tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
        lib: textsearch: fix escapes in example code
        udp: only do GSO if # of segs > 1
        ...
      9819a30c
    • Linus Torvalds's avatar
      Merge tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · 6fe137cb
      Linus Torvalds authored
      Pull s390 fixes from Vasily Gorbik:
      
       - defconfig updates
      
       - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
         constraint for function arguments. Two kvm changes acked-by Christian
         Borntraeger.
      
       - Fix -Wunused-but-set-variable warnings in mm code.
      
       - Avoid a constant misuse in qdio.
      
       - Handle a case when cpumf is temporarily unavailable.
      
      * tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
        KVM: s390: mark __insn32_query() as __always_inline
        KVM: s390: fix __insn32_query() inline assembly
        s390: update defconfigs
        s390/pci: mark function(s) __always_inline
        s390/mm: mark function(s) __always_inline
        s390/jump_label: mark function(s) __always_inline
        s390/cpu_mf: mark function(s) __always_inline
        s390/atomic,bitops: mark function(s) __always_inline
        s390/mm: fix -Wunused-but-set-variable warnings
        s390: mark __cpacf_query() as __always_inline
        s390/qdio: clarify size of the QIB parm area
        s390/cpumf: Fix indentation in sampling device driver
        s390/cpumsf: Check for CPU Measurement sampling
        s390/cpumf: Use consistant debug print format
      6fe137cb
    • Heiko Carstens's avatar
      KVM: s390: mark __insn32_query() as __always_inline · d0dea733
      Heiko Carstens authored
      __insn32_query() will not compile if the compiler decides to not
      inline it, since it contains an inline assembly with an "i" constraint
      with variable contents.
      Acked-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: default avatarVasily Gorbik <gor@linux.ibm.com>
      d0dea733
    • Heiko Carstens's avatar
      KVM: s390: fix __insn32_query() inline assembly · b1c41ac3
      Heiko Carstens authored
      The inline assembly constraints of __insn32_query() tell the compiler
      that only the first byte of "query" is being written to. Intended was
      probably that 32 bytes are written to.
      
      Fix and simplify the code and just use a "memory" clobber.
      
      Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte")
      Cc: stable@vger.kernel.org # v5.2+
      Acked-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: default avatarVasily Gorbik <gor@linux.ibm.com>
      b1c41ac3