- 27 Feb, 2006 36 commits
-
-
Michael Krufky authored
Make buffer a static const Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Hackmann authored
The probing code for tda8290 changes the state of the tda9887 GP ports. The patch assumes that if probing for tda8290 failed, this must be a tda9887 and restores its power on defaults. This should solve the module load order issue with some pinnacle cards. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Thilo Berger authored
Support for Satelco EasyWatch DVB-S light. Signed-off-by:
Thilo Berger <thilo_berger@gmx.net> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Alan Cox authored
There has been a CPIA2 driver out of kernel for a long time and it has been pretty clean for some time too. This is an import of the sourceforge driver which has been stripped of - 2.4 back compatibility - 2.4 old style MJPEG ioctls A couple of functions have been made static and the docs have been repackaged into Documentation/video4linux. The rvmalloc/free functions now match the cpia driver again. Other than that this is the code as is. Tested on x86-64 with a QX5 microscope. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Andreas Oberritter authored
Add two new ioctls to read the 33 bit presentation time stamp from audio and video devices as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1. Acked-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Some cleanup on printing enum names. v4l2_memory now translated also to name. Signed-off-by: -
Mauro Carvalho Chehab authored
Adds field and type name to debug message. Also prints now format for type=capture. Signed-off-by: -
Mauro Carvalho Chehab authored
Previously, only NTSC and PAL/M were associated to 30fps and 525 lines, so, PAL/60 were not handled properly. Signed-off-by: -
Mauro Carvalho Chehab authored
Added a new function that allows printing ioctl arguments. This makes easier to include debug code under v4l ioctl handling. Also fixed some declarations on internal ioctl. Signed-off-by: -
Rudo Thomas authored
The remote controller on the LifeView FlyDVB-T Duo card work flawlessly with the same settings as the LifeView FlyDVB-T LR301 card. Signed-off-by:
Rudo Thomas <rudo@matfyz.cz> Signed-off-by:
-
Michael Krufky authored
Standard video using the cx88 broadcast decoder is working, but blackbird isn't working yet, audio is only working correctly for television mode. S-Video and Composite are working for video-only, so I have them disabled for now. Signed-off-by:
-
Curt Meyers authored
- Enable the tuv1236 tuner on the Kworld-ATSC110 card so that the tuner can be identified when tuners.ko loads. - With this change it is no longer necessary to remove and reload the tuner module in order to get the tuv1236 identified. - This code was copied from the ATI HDTV Wonder init routine (in cx88-cards.c) which also uses the TUV1236D. Signed-off-by:
Curt Meyers <cmeyers@boilerbots.com> Signed-off-by:
-
Michael Krufky authored
- There is no radio with this tuner card... Thanks-to: Dwaine Garden <DwaineGarden@rogers.com> - fixed capitalization in card name. Signed-off-by:
-
Curt Meyers authored
- corrected composite input. - verified s-video input. Signed-off-by:
-
Curt Meyers authored
- When tuning VSB, use ANT input - When tuning QAM, use CABLE input Signed-off-by:
-
Andrew Burri authored
Signed-off-by:
Andrew Burri <andrew.burri@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Michael Krufky authored
The following are specific to lgdt3303, and are being renamed to reflect this. - cxusb_lgdt330x_config renamed to cxusb_lgdt3303_config. - cxusb_lgdt330x_frontend_attach renamed to cxusb_lgdt3303_frontend_attach. Signed-off-by:
-
BoyZonder authored
The remote control interface for this board is the same as the one for BTTV_BOARD_CONCEPTRONIC_CTVFMI2 Signed-off-by:
Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by:
-
Ricardo Cerqueira authored
When multiple cards were installed, only the first card would have audio initialized, because only the first position in the array parameter defaulted to "1" To make things worse, the "enable" parameter wasn't enabled, so there was no workaround. Signed-off-by:
-
Karsten Suehring authored
This patch adds another composite input to the Pinnacle PCTV 100i definition which filters the chrominace signal from the luma input. This improves video quality for Composite signals on the S-Video connector of the card. In addition the name string of the card is changed to include PCTV 40i and 50i since these cards are identical. Signed-off-by:
Karsten Suehring <ksuehring@gmx.net> Signed-off-by:
-
Tamuki Shoichi authored
Add support for ELSA EX-VISION 700TV, which is the ELSA Japan's flagship model of the software encoding TV capture card. All inputs (Television, Composite1 and S-Video) have been tested. Signed-off-by:
Tamuki Shoichi <tamuki@linet.gr.jp> Signed-off-by:
-
Michael Krufky authored
- KWorld HardwareMpegTV XPert must set gpio2 Signed-off-by:
-
Michael Krufky authored
- add radio support for KWorld HardwareMpegTV XPert - fix GPIO settings for tv and radio Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - update the Kconfig help to mention the VP310 - merge vp310_attach and mt312_attach into a new vp310_mt312_attach to remove some code duplication Signed-off-by:
-
Michael Krufky authored
- use one Author per line, which allows us to add more authors later without creating a mess. - Add Michael Krufky due to -git commit 2cbeddc9Signed-off-by:
-
Michael Krufky authored
- remove tuner.ko build dependency on xc3028.o , which will be added again later. - fix the following build error when using the "make kernel-links" build method to symlink the latest code from the v4l-dvb repository into the kernel source: drivers/media/video/xc3028.c:31:20: em28xx.h: No such file or directory drivers/media/video/xc3028.c: In function `xc3028_init': drivers/media/video/xc3028.c:120: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:121: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:139: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:140: error: dereferencing pointer to incomplete type make[3]: *** [drivers/media/video/xc3028.o] Error 1 Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
- Current xc3028 support is still experimental, requiring more work to be sent to mainstream. So, it was marked inside some defines, in order to be removed by gentree.pl stript. Script also updated to remove it. Signed-off-by: -
Markus Rechberger authored
Fixed amux hauppauge hvr900/terratec hybrid xs Signed-off-by:
Markus Rechberger <mrechberger@gmail.com> Signed-off-by:
-
Markus Rechberger authored
Fixed xc3028 firmware extractor for terratec's emBDA.sys firmware Fixed delay in firmwareupload, now terratec's firmware also works Signed-off-by:
-
Markus Rechberger authored
Added support for xc3028 to v4l which adds support for: * Terratec Hybrid XS (analogue) * Hauppauge HVR 900 (analogue) Signed-off-by:
-
Mauro Carvalho Chehab authored
StGit genreates patches-* when you run stg export command. It makes no sense to show such directories as changes on git status. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
- 07 Feb, 2006 4 commits
-
-
Markus Rechberger authored
Adding support for Terratec Prodigy XS Signed-off-by:
-
Markus Rechberger authored
disabled debug on by default in tvp5150 Signed-off-by:
-
Hans Verkuil authored
Forgot to take the NTSC frequency offset into account. Signed-off-by:
-
Adrian Bunk authored
The at76c651 and tda80xx frontends are currently completely unused, IOW their only effect is making the kernel larger for people accitentially enabling them. The current in-kernel drivers differ from the drivers at cvs.tuxbox.org, and re-adding them when parts of the dbox2 project get merged should be trivial. Signed-off-by:
-
