Add trace operations for Intel based HDA DSPs
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support or HDA DSP stream operations for Intel HDA DSPs.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use hdac_io_ops and configure all required spin_locks/mutex to use
hdac_hda_ext library. Keep the code conditional so that the HDA link
and audio codec support can be removed.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add PCM operations for Intel HDA based DSPs.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for loading DSP firmware on Intel HDA based platforms.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for PCI based DSP devices.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support ACPI based SOF DSP devices.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add HDA specific IPC mechanism for Intel DSP HW.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for various PM and core reset/run state transitions.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Support HDA controller operations for DSP and provide space for future
DSP HDA FW integration.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add SOF hardware DSP support for Intel Apollolake and Cannonlake based
devices.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add IPC support required for devices introduced before Skylake
(Merrifield, baytrail, CherryTrail, Haswell, Broadwell)
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add SOF support for Intel Broadwell based devices.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for the audio DSP hardware found on Intel Baytrail,
Cherrytrail and Braswell based devices.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Helpers to set-up back-ends, create platform devices and common
IO/block read/write operations
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add common directory for xtensa architecture
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a simple "fallback" machine driver that can be used to enable SOF
on boards with no codec device. This machine driver can also be forced
for debug/development.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for saving and restoring DSP context in D3 to host DDR.

The suspend callback includes: suspend all pcm's stream that are running,
send CTX_SAVE ipc, drop all ipc's, release trace dma and then
power off the DSP.

And the resume callback performs the following steps: load FW, run FW,
re-initialize trace, restore pipeline, restore the kcontrol values
and finally send the ctx restore ipc to the dsp.

The streams that are suspended are resumed by the ALSA resume trigger.
If the streams are paused during system suspend, they are marked
explicitly so they can be restored during PAUSE_RELEASE.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add userspace ABI for audio userspace application IO outside of regular
ALSA PCM and kcontrols. This is intended to be used to format
coefficients and data for custom processing components.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

The firmware loader exports APIs that can be called by core to load and
process multiple different file formats.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add operation pointers that can be called by core to control a wide
variety of DSP targets. The DSP HW drivers will fill in these
operations.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for real-time DSP logging (timestamped events
and bespoke binary data) for firmware debug. The current solution
relies on DMA transfers to system memory that is then accessed by
userspace tools such as sof-logger. For Intel platforms, two types of
DMAs are currently used (GP-DMA for Baytrail/CherryTrail and HDaudio
DMA for SKL+)

Due to historical reasons, the driver code follows the DSP firmware
conventions and refers to 'traces', but it is currently unrelated to
the Linux trace subsystem. Future solutions will include support for
more advanced hardware (e.g. MIPI Sys-T), additional formats and the
ability to enable/disable specific traces dynamically.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

SOF uses topology to define the DAPM graphs and widgets, DAIs, PCMs and set
parameters for init and run time usage. This patch loads topology and
maps it to IPC commands that are build the topology on the DSP.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for exposing PCMs to userspace. PCMs are defined by topology
and the operations in this patch map to SOF IPC calls.

The .get_module_upon_open field is set to allow for module load/unload
tests. There is no risk of the sof-pci/acpi-dev module being removed
while the platform components are in use. This may need to be
revisited when DT platforms are supported.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Define an IPC ABI for all host <--> DSP communication. This ABI should
be transport agnostic. i.e. it should work on MMIO and SPI/I2C style
interfaces.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add debugFS files that can be used to expose DSP memories and
and peripherals to userspace to assist with firmware debugging.

Since we cannot rely on debugFS, errors are logged but don't stop
execution.

When a resource cannot be read in D3, it is optionally cached on
suspend. Copying memories from IO will increase the suspend latency,
this should only used in engineering builds w/ debug options. This
part will have to be enhanced when support for D0ix states is
provided, currently only D0 and D3 are supported.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

SOF exposes regular ALSA Kcontrols that are defined by topology. This
patch converts the Kcontrol IO to DSP IPC.

The current implementation is aligned with previous Intel solutions,
but is not optimal and can be improved:
a) for every get/put the host wakes up the DSP and generates an
IPC. The kernel should cache the values and generate an IPC only when
strictly necessary.
b) the firmware can be implemented to only instantiate the pipelines
and related control-related parts that are needed at a given time, and
power-gate the relevant SRAM blocks.

The development tasks for these two improvements has started, once
validated they will be provided in an update.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

The Sound Open Firmware driver core is a generic architecture
independent layer that allows SOF to be used on many different
architectures and platforms. It abstracts DSP operations and IO
methods so that the target DSP can be an internal memory mapped or
external SPI or I2C based device. This abstraction also allows SOF to
be run on many different VMs on the same physical HW.

SOF also requires some data in ASoC PCM runtime data for looking up
SOF data during ASoC PCM operations.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Suppress the useless dynamic allocation of the dai driver structure.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When the routing path between a widget (e.g. "Speaker") and the codec
goes through an external amplifier, having a pin switch for this widget
allows the amplifier to be disabled when the widget is not to be used
(e.g. when using headphones).
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Mark Brown <broonie@kernel.org>

Build warning being reported:
    sound/soc/fsl/fsl_sai.c: In function 'fsl_sai_remove':
    sound/soc/fsl/fsl_sai.c:921:1: warning: no return statement in
    function returning non-void [-Wreturn-type]

So this patch just adds a "return 0" to fix it.

Fixes: 812ad463 ("ASoC: fsl_sai: Add support for runtime pm")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This function is a helper that permits to create pin switch controls for
a list of widgets whose names are listed in the PREFIX "pin-switches"
devicetree property.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Mark Brown <broonie@kernel.org>

disable = 1
enable = 0
prevent AP wake up, when not AP BTSCO scenario
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

As discussed on alsa-devel, a zero value is useful to get rid of all
quirks. Set default to -1 and align types as done in other machine
drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

As discussed on alsa-devel, a zero value is useful to get rid of all
quirks. Set default to -1 and align types as done in other machine
drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Remove warning below, align with other machine drivers.

bytcht_es8316.c:508:11: warning: cast from pointer to integer of
different size [-Wpointer-to-int-cast]

   quirk = (int)dmi_id->driver_data;
           ^
Fixes: a8d218f4 ('ASoC: Intel: bytcht_es8316: Add quirk for the Teclast X98+ II')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Basically the same actions as for system PM, so make use
of pm_runtime_force_suspend/pm_runtime_force_resume.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

is_slave_mode defaults to false because sai structure
that contains it is kzalloc'ed.

Anyhow, if we decide to set the following configuration
SAI slave -> SAI master, is_slave_mode will remain set on true
although SAI being master it should be set to false.

Fix this by updating is_slave_mode for each call of
fsl_sai_set_dai_fmt.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The simple-audio-card,pin-switches property can contain the list of
widget names for which pin switches must be created.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Mark Brown <broonie@kernel.org>