Fix issue with the sleeping calling hid_hw_request under spinlock.
When i2c is used as HID transport, this is calling kmalloc, which
can sleep. So remove call to this function while under spinlock.
 [ 1067.021961] Call Trace:
 [ 1067.021970]  [<ffffffff8192f5f2>] dump_stack+0x4d/0x6f
 [ 1067.021976]  [<ffffffff811109f2>] __might_sleep+0xd2/0xf0
 [ 1067.021981]  [<ffffffff811ea15b>] __kmalloc+0xeb/0x200
 [ 1067.021989]  [<ffffffff816e0cb3>] ? hid_alloc_report_buf+0x23/0x30
 [ 1067.021993]  [<ffffffff816e0cb3>] hid_alloc_report_buf+0x23/0x30
 [ 1067.021997]  [<ffffffff816f4cb7>] i2c_hid_request+0x57/0x110
 [ 1067.022006]  [<ffffffffa02bc61c>] sensor_hub_input_attr_get_raw_value+0xbc/0x100 [hid_sensor_hub]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

It has been reported that there is a new hardware version of the G27
in the 'wild'. This patch add's this new revision so that it can be
sent the command to switch to native mode.
Reported-by: "Ivan Baldo" <ibaldo@adinet.com.uy>
Tested-by: "evilcow" <evilcow93@yahoo.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

I noticed that after hot unplugging a Logitech unifying receiver
(drivers/hid/hid-logitech-dj.c) the kernel would occasionally spew a
stack trace similar to this:

usb 1-1.1.2: USB disconnect, device number 7
WARNING: CPU: 0 PID: 2865 at fs/sysfs/group.c:216 device_del+0x40/0x1b0()
sysfs group ffffffff8187fa20 not found for kobject 'hidraw0'
[...]
CPU: 0 PID: 2865 Comm: upowerd Tainted: G        W 3.14.0-rc4 #7
Hardware name: LENOVO 7783PN4/        , BIOS 9HKT43AUS 07/11/2011
 0000000000000009 ffffffff814cd684 ffff880427ccfdf8 ffffffff810616e7
 ffff88041ec61800 ffff880427ccfe48 ffff88041e444d80 ffff880426fab8e8
 ffff880429359960 ffffffff8106174c ffffffff81714b98 0000000000000028
Call Trace:
 [<ffffffff814cd684>] ? dump_stack+0x41/0x51
 [<ffffffff810616e7>] ? warn_slowpath_common+0x77/0x90
 [<ffffffff8106174c>] ? warn_slowpath_fmt+0x4c/0x50
 [<ffffffff81374fd0>] ? device_del+0x40/0x1b0
 [<ffffffff8137516f>] ? device_unregister+0x2f/0x50
 [<ffffffff813751fa>] ? device_destroy+0x3a/0x40
 [<ffffffffa03ca245>] ? drop_ref+0x55/0x120 [hid]
 [<ffffffffa03ca3e6>] ? hidraw_release+0x96/0xb0 [hid]
 [<ffffffff811929da>] ? __fput+0xca/0x210
 [<ffffffff8107fe17>] ? task_work_run+0x97/0xd0
 [<ffffffff810139a9>] ? do_notify_resume+0x69/0xa0
 [<ffffffff814dbd22>] ? int_signal+0x12/0x17
---[ end trace 63f4a46f6566d737 ]---

During device removal hid_disconnect() is called via hid_hw_stop() to
stop the device and free all its resources, including the sysfs
files. The problem is that if a user space process, such as upowerd,
holds a reference to a hidraw file the corresponding sysfs files will
be kept around (drop_ref() does not call device_destroy() if the open
counter is not 0) and it will be usb_disconnect() who, by calling
device_del() for the USB device, will indirectly remove the sysfs
files of the hidraw device (sysfs_remove_dir() is recursive these
days). Because of this, by the time user space releases the last
reference to the hidraw file and drop_ref() tries to destroy the
device the sysfs files are already gone and the kernel will print
the warning above.

Fix this by calling device_destroy() at USB disconnect time.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Cc: stable@vger.kernel.org	# 3.13
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Don't initialize force-feedback for devices that don't support it to avoid calls
to schedule_work() with an uninitialized work_struct.

Move the cancel_work_sync() call out of sony_destroy_ff() since the state worker
is used for the LEDs even when force-feedback is disabled.

Remove sony_destroy_ff() to avoid a compiler warning since it is no longer used.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We need at least HID_MAX_BUFFER_SIZE (4096) bytes as input buffer. HID
core depends on this as it requires every input report to be at least as
big as advertised.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID core expects the input buffers to be at least of size 4096
(HID_MAX_BUFFER_SIZE). Other sizes will result in buffer-overflows if an
input-report is smaller than advertised. We could, like i2c, compute the
biggest report-size instead of using HID_MAX_BUFFER_SIZE, but this will
blow up if report-descriptors are changed after ->start() has been called.
So lets be safe and just use the biggest buffer we have.

Note that this adds an additional copy to the HIDP input path. If there is
a way to make sure the skb-buf is big enough, we should use that instead.

The best way would be to make hid-core honor the @size argument, though,
that sounds easier than it is. So lets just fix the buffer-overflows for
now and afterwards look for a faster way for all transport drivers.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Added STM sensor hub vendor id in HID_SENSOR_HUB_ENUM_QUIRK to
fix report descriptors. These devices uses old FW which uses
logical 0 as minimum. In these, HID reports are not using proper
collection classes. So we need to fix report descriptors,for
such devices. This will not have any impact, if the FW uses
logical 1 as minimum.

We look for usage id for "power and report state", and modify
logical minimum value to 1.

This is a follow-up patch to commit id 875e36f8.
Signed-off-by: Archana Patni <archana.patni@linux.intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add Apple wireless keyboard 2011 JIS model (05ac:0257).
Signed-off-by: Huei-Horng Yo <hiroshi@ghostsinthelab.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When using hid_output_report(), the buffer should be allocated by hid_alloc_report_buf(),
not a custom malloc.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch adds runtime PM support for the HID over I2C driver. When the
i2c-hid device is first opened we power it on and on the last close we
power it off. This is actually what the driver is already doing but in
addition it allows subsystems, like ACPI power domain to power off the
device during runtime PM suspend, which should save even more power.

The implementation is not the most power efficient because it needs some
interaction from the userspace (e.g close the device node whenever we are
no more interested in getting events), nevertheless it allows us to save
some power and works with devices that are not wake capable.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add raw_request, set_raw_report and output_report transport-driver functions to
the HIDP driver.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add the uhid_output_report transport-driver function to the uhid driver.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add raw_request, set_raw_report and output_report transport-driver functions to
the USB HID driver.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add raw_request and output_report callbacks to the hid_ll_driver struct.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This is a Win7 device which does not work correctly with the default
settings (not the previous default BT).
However, the quirk ALWAYS_TRUE makes it working like a charm.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Microsoft Surface Type/Touch cover 2 devices have the flag HID_DG_CONTACTID
in their reports.This causes the device to bind to the hid-multitouch driver,
which doesn't handle generic keyboard/mouse input events.  The patch adds
the hardware id's of the device to hid-microsoft and to the HID special
driver array, which makes the device get handled by hid-generic/hid-input
properly.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64811Singed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com>
Reviewed-by: Benjamin Tissoires<benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

There is timeout error during initialization:
kernel: [   11.733104] hid-multitouch 0003:1870:0110.0001: usb_submit_urb(ctrl) failed: -1
kernel: [   11.734093] hid-multitouch 0003:1870:0110.0001: timeout initializing reports

Adding quirk HID_QUIRK_NO_INIT_REPORTS can solve the problem.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - quite some work on hid-sony driver in order to have DualShock 4
   device properly supported, from Frank Praznik

 - fixed support for suspending I2C conntected devices, from Mika
   Westerberg

 - regression fix for 0xff05 usage on Microsoft Ergonomy, from Jiri
   Kosina

 - support for Synaptics HD touchscreen, from AceLan Kao

 - workaround for USB 3.0 problem for logitech-dj connected devices,
   from Benjamin Tisssoires

 - support for Logitech Dual Action pads, from Vitaly Katraew

 - quite a few other assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: sony: Use colors for the Dualshock 4 LED names
  HID: sony: Add annotated HID descriptor for the Dualshock 4
  HID: sony: Cache the output report for the Dualshock 4
  HID: sony: Map gyroscopes and accelerometers to axes
  HID: sony: Fix spacing in the device definitions.
  HID: sony: Use standard output reports instead of raw reports to send data to the Dualshock 4.
  HID: sony: Use separate identifiers for USB and Bluetooth connected Dualshock 4 controllers.
  HID: hid-holtek-mouse: add new a070 mouse
  HID: hid-sensor-hub: Fix buggy report descriptors
  HID: logitech-dj: Fix USB 3.0 issue
  HID: sony: Rename worker function
  HID: sony: Add LED controls for the Dualshock 4
  HID: sony: Add force-feedback support for the Dualshock 4
  HID: hidraw: make comment more accurate and nicer
  HID: sony: fix error return code
  HID: input: fix input sysfs path for hid devices
  HID: debug: add labels for some new buttons
  HID: remove SIS entries from hid_have_special_driver[]
  HID: microsoft: no fallthrough in MS ergonomy 0xff05 usage
  HID: add support for SiS multitouch panel in the touch monitor LG 23ET83V
  ...

Pull device-mapper changes from Mike Snitzer:
 "A lot of attention was paid to improving the thin-provisioning
  target's handling of metadata operation failures and running out of
  space.  A new 'error_if_no_space' feature was added to allow users to
  error IOs rather than queue them when either the data or metadata
  space is exhausted.

  Additional fixes/features include:
   - a few fixes to properly support thin metadata device resizing
   - a solution for reliably waiting for a DM device's embedded kobject
     to be released before destroying the device
   - old dm-snapshot is updated to use the dm-bufio interface to take
     advantage of readahead capabilities that improve snapshot
     activation
   - new dm-cache target tunables to control how quickly data is
     promoted to the cache (fast) device
   - improved write efficiency of cluster mirror target by combining
     userspace flush and mark requests"

* tag 'dm-3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
  dm log userspace: allow mark requests to piggyback on flush requests
  dm space map metadata: fix bug in resizing of thin metadata
  dm cache: add policy name to status output
  dm thin: fix pool feature parsing
  dm sysfs: fix a module unload race
  dm snapshot: use dm-bufio prefetch
  dm snapshot: use dm-bufio
  dm snapshot: prepare for switch to using dm-bufio
  dm snapshot: use GFP_KERNEL when initializing exceptions
  dm cache: add block sizes and total cache blocks to status output
  dm btree: add dm_btree_find_lowest_key
  dm space map metadata: fix extending the space map
  dm space map common: make sure new space is used during extend
  dm: wait until embedded kobject is released before destroying a device
  dm: remove pointless kobject comparison in dm_get_from_kobject
  dm snapshot: call destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  dm cache policy mq: introduce three promotion threshold tunables
  dm cache policy mq: use list_del_init instead of list_del + INIT_LIST_HEAD
  dm thin: fix set_pool_mode exposed pool operation races
  dm thin: eliminate the no_free_space flag
  ...

Pull SCSI updates from James Bottomley:
 "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
  qla2xxx.  It also removes the aic7xxx_old driver (which has been
  deprecated for nearly a decade) and adds support for deadlines in
  error handling"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits)
  [SCSI] hpsa: allow SCSI mid layer to handle unit attention
  [SCSI] hpsa: do not require board "not ready" status after hard reset
  [SCSI] hpsa: enable unit attention reporting
  [SCSI] hpsa: rename scsi prefetch field
  [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection
  [SCSI] ipr: increase dump size in ipr driver
  [SCSI] mac_scsi: Fix crash on out of memory
  [SCSI] st: fix enlarge_buffer
  [SCSI] qla1280: Annotate timer on stack so object debug does not complain
  [SCSI] qla4xxx: Update driver version to 5.04.00-k3
  [SCSI] qla4xxx: Recreate chap data list during get chap operation
  [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
  [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct
  [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
  [SCSI] qla4xxx: Add host statistics support
  [SCSI] scsi_transport_iscsi: Add host statistics support
  [SCSI] qla4xxx: Added support for Diagnostics MBOX command
  [SCSI] bfa: Driver version upgrade to 3.2.23.0
  [SCSI] bfa: change FC_ELS_TOV to 20sec
  [SCSI] bfa: Observed auto D-port mode instead of manual
  ...

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...

Pull tracing updates from Steven Rostedt:
 "This pull request has a new feature to ftrace, namely the trace event
  triggers by Tom Zanussi.  A trigger is a way to enable an action when
  an event is hit.  The actions are:

   o  trace on/off - enable or disable tracing
   o  snapshot     - save the current trace buffer in the snapshot
   o  stacktrace   - dump the current stack trace to the ringbuffer
   o  enable/disable events - enable or disable another event

  Namhyung Kim added updates to the tracing uprobes code.  Having the
  uprobes add support for fetch methods.

  The rest are various bug fixes with the new code, and minor ones for
  the old code"

* tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits)
  tracing: Fix buggered tee(2) on tracing_pipe
  tracing: Have trace buffer point back to trace_array
  ftrace: Fix synchronization location disabling and freeing ftrace_ops
  ftrace: Have function graph only trace based on global_ops filters
  ftrace: Synchronize setting function_trace_op with ftrace_trace_function
  tracing: Show available event triggers when no trigger is set
  tracing: Consolidate event trigger code
  tracing: Fix counter for traceon/off event triggers
  tracing: Remove double-underscore naming in syscall trigger invocations
  tracing/kprobes: Add trace event trigger invocations
  tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
  tracing/uprobes: Add @+file_offset fetch method
  uprobes: Allocate ->utask before handler_chain() for tracing handlers
  tracing/uprobes: Add support for full argument access methods
  tracing/uprobes: Fetch args before reserving a ring buffer
  tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
  tracing/probes: Implement 'memory' fetch method for uprobes
  tracing/probes: Add fetch{,_size} member into deref fetch method
  tracing/probes: Move 'symbol' fetch method to kprobes
  tracing/probes: Implement 'stack' fetch method for uprobes
  ...

Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', 'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus

In the cluster evironment, cluster write has poor performance because
userspace_flush() has to contact a userspace program (cmirrord) for
clear/mark/flush requests.  But both mark and flush requests require
cmirrord to communicate the message to all the cluster nodes for each
flush call.  This behaviour is really slow.

To address this we now merge mark and flush requests together to reduce
the kernel-userspace-kernel time.  We allow a new directive,
"integrated_flush" that can be used to instruct the kernel log code to
combine flush and mark requests when directed by userspace.  If not
directed by userspace (due to an older version of the userspace code
perhaps), the kernel will function as it did previously - preserving
backwards compatibility.  Additionally, flush requests are performed
lazily when only clear requests exist.
Signed-off-by: Dongmao Zhang <dmzhang@suse.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge first patch-bomb from Andrew Morton:

 - a couple of misc things

 - inotify/fsnotify work from Jan

 - ocfs2 updates (partial)

 - about half of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  mm/migrate: remove unused function, fail_migrate_page()
  mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages
  mm/migrate: correct failure handling if !hugepage_migration_support()
  mm/migrate: add comment about permanent failure path
  mm, page_alloc: warn for non-blockable __GFP_NOFAIL allocation failure
  mm: compaction: reset scanner positions immediately when they meet
  mm: compaction: do not mark unmovable pageblocks as skipped in async compaction
  mm: compaction: detect when scanners meet in isolate_freepages
  mm: compaction: reset cached scanner pfn's before reading them
  mm: compaction: encapsulate defer reset logic
  mm: compaction: trace compaction begin and end
  memcg, oom: lock mem_cgroup_print_oom_info
  sched: add tracepoints related to NUMA task migration
  mm: numa: do not automatically migrate KSM pages
  mm: numa: trace tasks that fail migration due to rate limiting
  mm: numa: limit scope of lock for NUMA migrate rate limiting
  mm: numa: make NUMA-migrate related functions static
  lib/show_mem.c: show num_poisoned_pages when oom
  mm/hwpoison: add '#' to hwpoison_inject
  mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter
  ...

Pull libata updates from Tejun Heo:
 "Support for some new embedded controllers.

  A couple late (<= a week) fixes have stable cc'd and one patch ("SATA:
  MV: Add support for the optional PHYs") got committed yesterday
  because otherwise the resulting kernel would fail boot on an embedded
  board due to interdependent changes in its platform tree.

  Other than that, nothing too noteworthy"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  SATA: MV: Add support for the optional PHYs
  sata-highbank: Remove unnecessary ahci_platform.h include
  libata: disable LPM for some WD SATA-I devices
  ARM: mvebu: update the SATA compatible string for Armada 370/XP
  ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
  ata: sata_mv: introduce compatible string "marvell, armada-370-sata"
  ata: pata_samsung_cf: Remove unused macros
  ata: pata_samsung_cf: Use devm_ioremap_resource()
  ata: pata_samsung_cf: Merge pata_samsung_cf.h into pata_samsung_cf.c
  ata: pata_samsung_cf: Move plat/regs-ata.h to drivers/ata
  drivers: ata: Mark the function as static in libahci.c
  drivers: ata: Mark the function ahci_init_interrupts() as static in ahci.c
  ahci: imx: fix the error handling in imx_ahci_probe()
  ahci: imx: ahci_imx_softreset() can be static
  ahci: imx: Add i.MX53 support
  ahci: imx: Pull out the clock enable/disable calls
  libata, dt: Document sata_rcar bindings
  sata_rcar: Add R-Car Gen2 SATA PHY support
  ahci: mcp89: enter AHCI mode under Apple BIOS emulation
  ata: libata-eh: Remove unnecessary snprintf arithmetic

Pull cgroup updates from Tejun Heo:
 "The bulk of changes are cleanups and preparations for the upcoming
  kernfs conversion.

   - cgroup_event mechanism which is and will be used only by memcg is
     moved to memcg.

   - pidlist handling is updated so that it can be served by seq_file.

     Also, the list is not sorted if sane_behavior.  cgroup
     documentation explicitly states that the file is not sorted but it
     has been for quite some time.

   - All cgroup file handling now happens on top of seq_file.  This is
     to prepare for kernfs conversion.  In addition, all operations are
     restructured so that they map 1-1 to kernfs operations.

   - Other cleanups and low-pri fixes"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits)
  cgroup: trivial style updates
  cgroup: remove stray references to css_id
  doc: cgroups: Fix typo in doc/cgroups
  cgroup: fix fail path in cgroup_load_subsys()
  cgroup: fix missing unlock on error in cgroup_load_subsys()
  cgroup: remove for_each_root_subsys()
  cgroup: implement for_each_css()
  cgroup: factor out cgroup_subsys_state creation into create_css()
  cgroup: combine css handling loops in cgroup_create()
  cgroup: reorder operations in cgroup_create()
  cgroup: make for_each_subsys() useable under cgroup_root_mutex
  cgroup: css iterations and css_from_dir() are safe under cgroup_mutex
  cgroup: unify pidlist and other file handling
  cgroup: replace cftype->read_seq_string() with cftype->seq_show()
  cgroup: attach cgroup_open_file to all cgroup files
  cgroup: generalize cgroup_pidlist_open_file
  cgroup: unify read path so that seq_file is always used
  cgroup: unify cgroup_write_X64() and cgroup_write_string()
  cgroup: remove cftype->read(), ->read_map() and ->write()
  hugetlb_cgroup: convert away from cftype->read()
  ...

Pull percpu changes from Tejun Heo:
 "Two trivial changes - addition of WARN_ONCE() in lib/percpu-refcount.c
  and use of VMALLOC_TOTAL instead of END - START in percpu.c"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: use VMALLOC_TOTAL instead of VMALLOC_END - VMALLOC_START
  percpu-refcount: Add a WARN() for ref going negative

Pull workqueue update from Tejun Heo:
 "Just one patch to add destroy_work_on_stack() annotations to help
  debugobj debugging"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()

Pull dlm update from David Teigland:
 "A single change to speed up recovery times when using SCTP
  connections"

* tag 'dlm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: set zero linger time on sctp socket

Pull GFS2 updates from Steven Whitehouse:
 "The main topics this time are allocation, in the form of Bob's
  improvements when searching resource groups and several updates to
  quotas which should increase scalability.  The quota changes follow on
  from those in the last merge window, and there will likely be further
  work to come in this area in due course.

  There are also a few patches which help to improve efficiency of
  adding entries into directories, and clean up some of that code.

  One on-disk change is included this time, which is to write some
  additional information which should be useful to fsck and also
  potentially for debugging.

  Other than that, its just a few small random bug fixes and clean ups"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (24 commits)
  GFS2: revert "GFS2: d_splice_alias() can't return error"
  GFS2: Small cleanup
  GFS2: Don't use ENOBUFS when ENOMEM is the correct error code
  GFS2: Fix kbuild test robot reported warning
  GFS2: Move quota bitmap operations under their own lock
  GFS2: Clean up quota slot allocation
  GFS2: Only run logd and quota when mounted read/write
  GFS2: Use RCU/hlist_bl based hash for quotas
  GFS2: No need to invalidate pages for a dio read
  GFS2: Add initialization for address space in super block
  GFS2: Add hints to directory leaf blocks
  GFS2: For exhash conversion, only one block is needed
  GFS2: Increase i_writecount during gfs2_setattr_chown
  GFS2: Remember directory insert point
  GFS2: Consolidate transaction blocks calculation for dir add
  GFS2: Add directory addition info structure
  GFS2: Use only a single address space for rgrps
  GFS2: Use range based functions for rgrp sync/invalidation
  GFS2: Remove test which is always true
  GFS2: Remove gfs2_quota_change_host structure
  ...

fail_migrate_page() isn't used anywhere, so remove it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some part of putback_lru_pages() and putback_movable_pages() is
duplicated, so it could confuse us what we should use.  We can remove
putback_lru_pages() since it is not really needed now.  This makes us
undestand and maintain the code more easily.

And comment on putback_movable_pages() is stale now, so fix it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should remove the page from the list if we fail with ENOSYS, since
migrate_pages() consider error cases except -ENOMEM and -EAGAIN as
permanent failure and it assumes that the page would be removed from the
list.  Without this patch, we could overcount number of failure.

In addition, we should put back the new hugepage if
!hugepage_migration_support().  If not, we would leak hugepage memory.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Let's add a comment about where the failed page goes to, which makes
code more readable.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__GFP_NOFAIL may return NULL when coupled with GFP_NOWAIT or GFP_ATOMIC.

Luckily, nothing currently does such craziness.  So instead of causing
such allocations to loop (potentially forever), we maintain the current
behavior and also warn about the new users of the deprecated flag.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Compaction used to start its migrate and free page scaners at the zone's
lowest and highest pfn, respectively.  Later, caching was introduced to
remember the scanners' progress across compaction attempts so that
pageblocks are not re-scanned uselessly.  Additionally, pageblocks where
isolation failed are marked to be quickly skipped when encountered again
in future compactions.

Currently, both the reset of cached pfn's and clearing of the pageblock
skip information for a zone is done in __reset_isolation_suitable().
This function gets called when:

 - compaction is restarting after being deferred
 - compact_blockskip_flush flag is set in compact_finished() when the scanners
   meet (and not again cleared when direct compaction succeeds in allocation)
   and kswapd acts upon this flag before going to sleep

This behavior is suboptimal for several reasons:

 - when direct sync compaction is called after async compaction fails (in the
   allocation slowpath), it will effectively do nothing, unless kswapd
   happens to process the compact_blockskip_flush flag meanwhile. This is racy
   and goes against the purpose of sync compaction to more thoroughly retry
   the compaction of a zone where async compaction has failed.
   The restart-after-deferring path cannot help here as deferring happens only
   after the sync compaction fails. It is also done only for the preferred
   zone, while the compaction might be done for a fallback zone.

 - the mechanism of marking pageblock to be skipped has little value since the
   cached pfn's are reset only together with the pageblock skip flags. This
   effectively limits pageblock skip usage to parallel compactions.

This patch changes compact_finished() so that cached pfn's are reset
immediately when the scanners meet.  Clearing pageblock skip flags is
unchanged, as well as the other situations where cached pfn's are reset.
This allows the sync-after-async compaction to retry pageblocks not
marked as skipped, such as blocks !MIGRATE_MOVABLE blocks that async
compactions now skips without marking them.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>