We can now fully support sharing the same MSIX for all mqprio TX rings
belonging to the same ethtool channel with the new infrastructure:

1. Allocate the proper entries for cp_ring_arr in struct bnxt_cp_ring_info
to support the additional TX rings.

2. Populate the tx_ring array in struct bnxt_napi for all TX rings
sharing the same NAPI.

3. bnxt_num_tx_to_cp() returns the proper NQ/completion rings to support
the TX rings in the input.

4. Adjust bnxt_get_num_ring_stats() for the reduced number of ring
counters with the new scheme.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add 3 macros that handle to conversions between TC numbers and TX
ring numbers.  These will help to clarify the existing logic and the
new logic in the next patch.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Up until now, each TX ring always requires a completion ring/NQ/MSIX.
bnxt_trim_rings() and the assignment of bp->cp_nr_rings always make
this assumption.  This will no longer be true in the next patches, so
we refactor and add helper functions to determine the proper relationship
between TX rings and the required completion ring/NQ/MSIX.  This patch
does not change the 1:1 relationship yet.

Note that on P5 chips, each RX and TX ring still requires a completion
ring.  Only the number of NQs has been reduced.  We should no longer call
bnxt_trim_rings() to adjust the RX and TX rings on P5 chips.  Replace with
simple logic to check that RX + TX < CP and adjust accordingly.

bnxt_check_rings() should call _bnxt_get_max_rings() to get the raw
number of rings instead of bnxt_get_max_rings().  If we are about to
create TCs, bnxt_get_max_rings() would not be able to calculate the max
rings correctly.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For each mqprio TC, we allocate a set of TX rings to map to the new
hardware CoS queue.  Expand the tx_ring pointer in struct bnxt_napi
to an array of 8 to support up to 8 TX rings, one for each TC.
Only array entry 0 is used at this time.  The rest of the array
entries will be used in later patches.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add 2 helper functions to set coalescing for each RX and TX rings.  This
will make it easier to expand the number of TX rings per MSIX in the
next patches.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to support multiple TX rings on the same MSIX, we'll use the
upper byte of the TX opaque field to store the ring index in the new
tx_napi_idx field.  This tx_napi_idx field is currently always 0 until
more infrastructure is added in later patches.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_tx_int() processes the only one TX ring from the bnxt_napi pointer.
To prepare for more TX rings associated with the bnxt_napi structure,
add a new __bnxt_tx_int() function that takes the bnxt_tx_ring_info
pointer to process that one TX ring.  No functional change.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These 2 constants were used for the one RX and one TX completion
ring pointer in the cpr->cp_ring_arr fixed array.  Now that we've
changed to allocating the array for the exact number of entries to
support more TX rings, we no longer use these constants.

The array index as well as the type of completion ring (RX/TX) are
now encoded in the handle for the completion ring.  This will allow
us to locate the completion ring during NAPI for any number of
completion rings sharing the same MSIX.  In the following patches,
we'll be adding support for more TX rings associated with the same
MSIX vector.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

From the TX or RX ring structure, we need to find the corresponding
completion ring during initialization.  On P5 chips, we use the MSIX/napi
entry to locate the completion ring because there is only one RX/TX
ring per MSIX.  To allow multiple TX rings for each MSIX, we need
to add a direct pointer from the TX ring and RX ring structures.
This also simplifies the existing logic.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cp_ring_arr is currently a fixed array of 2 pointers for the
TX and RX completion rings.  These pointers are allocated during
ring initialization.  Currntly, we support up to 2 completion rings
for each MSIX.  In order to support more completion rings, we change
this fixed array to a pointer and allocate the required entries
during ring initialization.  This patch keeps the current scheme of
allocating only 2 entries when needed.  Later patches will expand
and allocate more entries when required.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

From the TX or RX ring structure, we need to find the corresponding
completion ring during initialization.  On P5 chips, we use the MSIX/napi
entry to locate the completion ring because there is only one RX/TX
ring per MSIX.  To allow multiple TX rings for each MSIX, we need
to add a direct pointer from the TX ring and RX ring structures.
This also simplifies the existing logic.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the opaque field in the TX BD is only used for debugging.
The TX completion logic relies on getting one TX completion for each
packet and they always complete in order.

Improve this scheme by putting the producer information (ring index plus
number of BDs for the packet) in the opaque field.  This way, we can
handle TX completion processing by looking at the last TX completion
instead of counting the number of completions.

Since we no longer need to count the exact number of completions, we can
optimize xmit_more by disabling TX completion when the xmit_more
condition is true.  This will be done in later patches.

This patch is only initializing the opaque field in the TX BD and is
not changing the driver's TX completion logic yet.
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-11-13 (i40e)

This series contains updates to i40e driver only.

Justin Bronder increases number of allowable descriptors for XL710
devices.

Su Hui adds error check, and unroll, for RSS configuration.

Andrii changes module read error message to debug and makes it more
verbose.

Ivan Vecera performs numerous clean-ups and refactors to driver such as
removing unused defines and fields, converting use of flags to bitmaps,
adding helpers, re-organizing code, etc.
====================

Link: https://lore.kernel.org/r/20231113231047.548659-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

From commit 9eed69a9 ("i40e: Drop FCoE code from core driver files")
the field i40e_mac_info.san_addr is unused (never filled).
The field i40e_mac_info.max_fcoeq is unused from the beginning.
Remove both.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Co-developed-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-16-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move version check helper functions from i40e_type.h to
i40e_prototype.h as per discussion [1].

[1] https://lore.kernel.org/all/cdcd6b97-1138-4cd7-854f-b3faa1f475f8@intel.com/#t

Cc: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-15-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The i40e_hw.mac.type cannot to be equal to I40E_MAC_VF or
I40E_MAC_X722_VF so remove helper i40e_is_vf(), simplify
i40e_adminq_init_regs() and remove enums for these VF MAC types.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-14-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use new helpers to check versions of running FW and provided
AQ API to make the code more readable.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-13-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add another helper functions that will be used by subsequent
patch to refactor existing open-coded checks whether the version
of running firmware and AdminQ API is recent enough to provide
certain capabilities.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-12-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move i40e_is_aq_api_ver_ge helper function (used to check if AdminQ
API version is recent enough) to header so it can be used from
other .c files.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-11-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some i40e_hw.caps bits are set in i40e_set_hw_caps(), some of them
in i40e_init_adminq() and the rest of them in i40e_sw_init().
Consolidate the initialization to single proper place i40e_set_hw_caps().
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-10-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fields .caps in i40e_hw and .hw_features in i40e_pf both indicate
capabilities provided by hardware. Move and merge i40e_pf.hw_features
into i40e_hw.caps as this is more appropriate place for them and
adjust their names to I40E_HW_CAP_... convention.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-9-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert flags field in i40e_hw from u64 to bitmap and its usage
to use bit access functions and rename the field to 'caps' as
this field describes capabilities that are set once on init and
read many times later.

Changes:
- Convert "hw_ptr->flags & FLAG" to "test_bit(FLAG, ...)"
- Convert "hw_ptr->flags |= FLAG" to "set_bit(FLAG, ...)"
- Convert "hw_ptr->flags &= ~FLAG" to "clear_bit(FLAG, ...)"
- Rename i40e_hw.flags to i40e_hw.caps
- Rename i40e_set_hw_flags() to i40e_set_hw_caps()
- Adjust caps names so they are prefixed by I40E_HW_CAP_ and existing
  _CAPABLE suffixes are stripped
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-8-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert flags and hw_features fields from i40e_pf from u32 to
bitmaps and their usage to use bit access functions.

Changes:
- Convert "pf_ptr->(flags|hw_features) & FL" to "test_bit(FL, ...)"
- Convert "pf_ptr->(flags|hw_features) |= FL" to "set_bit(FL, ...)"
- Convert "pf_ptr->(flags|hw_features) &= ~FL" to "clear_bit(FL, ...)"
- Rename flag field to bitno in i40e_priv_flags and adjust ethtool
  callbacks to work with flags bitmap
- Rename flag names where '_ENABLED'->'_ENA' and '_DISABLED'->'_DIS'
  like in ice driver
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-7-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Enum type names should not be suffixed by '_t'. Either to use
'typedef enum name name_t' to so plain 'name_t var' instead of
'enum name_t var'.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-6-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The flag I40E_FLAG_RX_CSUM_ENABLED and I40E_HW_FLAG_DROP_MODE are
set and never read. Remove them.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-5-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make the driver not produce an error message on
"ethtool -m ethX" command when a non-SFP module is encountered
hence there is no possibility to read the EEPROM.
Make the message to appear in the debug log rather
than as an error string.

Change the return code to -EOPNOTSUPP and the string to make
it more verbose.
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
CC: Stefan Assmann <sassmann@redhat.com>
CC: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-4-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

check the value of 'ret' after calling 'i40e_vsi_config_rss'.
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-3-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In Tables 8-12 and 8-22 in the X710/XXV710/XL710 datasheet, the QLEN
description states that the maximum size of the descriptor queue is 8k
minus 32, or 8160.
Signed-off-by: Justin Bronder <jsbronder@cold-front.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-2-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No functional change, uses the existing ETH_P_REALTEK constant already
defined in if_ether.h.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231113165030.2440083-1-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - sched: fix SKB_NOT_DROPPED_YET splat under debug config

  Current release - new code bugs:

   - tcp:
       - fix usec timestamps with TCP fastopen
       - fix possible out-of-bounds reads in tcp_hash_fail()
       - fix SYN option room calculation for TCP-AO

   - tcp_sigpool: fix some off by one bugs

   - bpf: fix compilation error without CGROUPS

   - ptp:
       - ptp_read() should not release queue
       - fix tsevqs corruption

  Previous releases - regressions:

   - llc: verify mac len before reading mac header

  Previous releases - always broken:

   - bpf:
       - fix check_stack_write_fixed_off() to correctly spill imm
       - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
       - check map->usercnt after timer->timer is assigned

   - dsa: lan9303: consequently nested-lock physical MDIO

   - dccp/tcp: call security_inet_conn_request() after setting IP addr

   - tg3: fix the TX ring stall due to incorrect full ring handling

   - phylink: initialize carrier state at creation

   - ice: fix direction of VF rules in switchdev mode

  Misc:

   - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"

* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  net: ti: icss-iep: fix setting counter value
  ptp: fix corrupted list in ptp_open
  ptp: ptp_read should not release queue
  net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
  net: kcm: fill in MODULE_DESCRIPTION()
  net/sched: act_ct: Always fill offloading tuple iifidx
  netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
  netfilter: xt_recent: fix (increase) ipv6 literal buffer length
  ipvs: add missing module descriptions
  netfilter: nf_tables: remove catchall element in GC sync path
  netfilter: add missing module descriptions
  drivers/net/ppp: use standard array-copy-function
  net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
  virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
  r8169: respect userspace disabling IFF_MULTICAST
  selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
  bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
  net: phylink: initialize carrier state at creation
  test/vsock: add dobule bind connect test
  test/vsock: refactor vsock_accept
  ...

Pull crypto fixes from Herbert Xu:
 "This fixes a regression in ahash and hides the Kconfig sub-options for
  the jitter RNG"

* tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ahash - Set using_shash for cloned ahash wrapper over shash
  crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT

Pull input updates from Dmitry Torokhov:

 - a number of input drivers has been converted to use facilities
   provided by the device core to instantiate driver-specific attributes
   instead of using devm_device_add_group() and similar APIs

 - platform input devices have been converted to use remove() callback
   returning void

 - a fix for use-after-free when tearing down a Synaptics RMI device

 - a few flexible arrays in input structures have been annotated with
   __counted_by to help hardening efforts

 - handling of vddio supply in cyttsp5 driver

 - other miscellaneous fixups

* tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
  Input: walkera0701 - use module_parport_driver macro to simplify the code
  Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
  dt-bindings: input: fsl,scu-key: Document wakeup-source
  Input: cyttsp5 - add handling for vddio regulator
  dt-bindings: input: cyttsp5: document vddio-supply
  Input: tegra-kbc - use device_get_match_data()
  Input: Annotate struct ff_device with __counted_by
  Input: axp20x-pek - avoid needless newline removal
  Input: mt - annotate struct input_mt with __counted_by
  Input: leds - annotate struct input_leds with __counted_by
  Input: evdev - annotate struct evdev_client with __counted_by
  Input: synaptics-rmi4 - replace deprecated strncpy
  Input: wm97xx-core - convert to platform remove callback returning void
  Input: wm831x-ts - convert to platform remove callback returning void
  Input: ti_am335x_tsc - convert to platform remove callback returning void
  Input: sun4i-ts - convert to platform remove callback returning void
  Input: stmpe-ts - convert to platform remove callback returning void
  Input: pcap_ts - convert to platform remove callback returning void
  Input: mc13783_ts - convert to platform remove callback returning void
  Input: mainstone-wm97xx - convert to platform remove callback returning void
  ...

Pull more i2c updates from Wolfram Sang:
 "This contains one patch which slipped through the cracks (iproc), a
  core sanitizing improvement as the new memdup_array_user() helper went
  upstream (i2c-dev), and two driver bugfixes (designware, cp2615)"

* tag 'for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cp2615: Fix 'assignment to __be16' warning
  i2c: dev: copy userspace array safely
  i2c: designware: Disable TX_EMPTY irq while waiting for block length byte
  i2c: iproc: handle invalid slave state

Pull watchdog updates from Wim Van Sebroeck:

 - add support for Amlogic C3 and S4 SoCs

 - add IT8613 ID

 - add MSM8226 and MSM8974 compatibles

 - other small fixes and improvements

* tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  dt-bindings: watchdog: Add support for Amlogic C3 and S4 SoCs
  watchdog: mlx-wdt: Parameter desctiption warning fix
  watchdog: aspeed: Add support for aspeed,reset-mask DT property
  dt-bindings: watchdog: aspeed-wdt: Add aspeed,reset-mask property
  watchdog: apple: Deactivate on suspend
  dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles
  dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output'
  wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset
  drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_ms
  drivers: watchdog: marvell_gti: fix zero pretimeout handling
  watchdog: marvell_gti: Replace of_platform.h with explicit includes
  watchdog: imx_sc_wdt: continue if the wdog already enabled
  watchdog: st_lpc: Use device_get_match_data()
  watchdog: wdat_wdt: Add timeout value as a param in ping method
  watchdog: gpio_wdt: Make use of device properties
  sbsa_gwdt: Calculate timeout with 64-bit math
  watchdog: ixp4xx: Make sure restart always works
  watchdog: it87_wdt: add IT8613 ID
  watchdog: marvell_gti_wdt: Fix error code in probe()
  Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for platform_get_irq()
  ...

Merge tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This contains a few fixes and a bunch of cleanups, a lot of which is
  in preparation for Uwe's character device support that may be ready in
  time for the next merge window"

* tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: samsung: Document new member .channel in struct samsung_pwm_chip
  pwm: bcm2835: Add support for suspend/resume
  pwm: brcmstb: Checked clk_prepare_enable() return value
  pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
  pwm: pxa: Explicitly include correct DT includes
  pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe()
  pwm: samsung: Consistently use the same name for driver data
  pwm: vt8500: Simplify using devm functions
  pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe()
  pwm: sprd: Provide a helper to cast a chip to driver data
  pwm: spear: Simplify using devm functions
  pwm: mtk-disp: Simplify using devm_pwmchip_add()
  pwm: imx-tpm: Simplify using devm functions
  pwm: brcmstb: Simplify using devm functions
  pwm: bcm2835: Simplify using devm functions
  pwm: bcm-iproc: Simplify using devm functions
  pwm: Adapt sysfs API documentation to reality
  pwm: dwc: add PWM bit unset in get_state call
  pwm: dwc: make timer clock configurable
  pwm: dwc: split pci out of core driver
  ...

Pull iommu updates from Joerg Roedel:
 "Core changes:
   - Make default-domains mandatory for all IOMMU drivers
   - Remove group refcounting
   - Add generic_single_device_group() helper and consolidate drivers
   - Cleanup map/unmap ops
   - Scaling improvements for the IOVA rcache depot
   - Convert dart & iommufd to the new domain_alloc_paging()

  ARM-SMMU:
   - Device-tree binding update:
       - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
   - SMMUv2:
       - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
   - SMMUv3:
       - Large refactoring of the context descriptor code to move the CD
         table into the master, paving the way for '->set_dev_pasid()'
         support on non-SVA domains
   - Minor cleanups to the SVA code

  Intel VT-d:
   - Enable debugfs to dump domain attached to a pasid
   - Remove an unnecessary inline function

  AMD IOMMU:
   - Initial patches for SVA support (not complete yet)

  S390 IOMMU:
   - DMA-API conversion and optimized IOTLB flushing

  And some smaller fixes and improvements"

* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
  iommu/dart: Remove the force_bypass variable
  iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
  iommu/dart: Convert to domain_alloc_paging()
  iommu/dart: Move the blocked domain support to a global static
  iommu/dart: Use static global identity domains
  iommufd: Convert to alloc_domain_paging()
  iommu/vt-d: Use ops->blocked_domain
  iommu/vt-d: Update the definition of the blocking domain
  iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
  Revert "iommu/vt-d: Remove unused function"
  iommu/amd: Remove DMA_FQ type from domain allocation path
  iommu: change iommu_map_sgtable to return signed values
  iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
  iommu/vt-d: debugfs: Support dumping a specified page table
  iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
  iommu/vt-d: debugfs: Dump entry pointing to huge page
  iommu/vt-d: Remove unused function
  iommu/arm-smmu-v3-sva: Remove bond refcount
  iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
  iommu/arm-smmu-v3: Rename cdcfg to cd_table
  ...

Currently icss_iep_set_counter() writes the upper 32-bits of the
counter value to both the lower and upper counter registers, so
fix this by writing the appropriate value to the lower register.

Fixes: c1e0230e ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://lore.kernel.org/r/20231107120037.1513546-1-diogo.ivo@siemens.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There is no lock protection when writing ptp->tsevqs in ptp_open() and
ptp_release(), which can cause data corruption, use spin lock to avoid this
issue.

Moreover, ptp_release() should not be used to release the queue in ptp_read(),
and it should be deleted altogether.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reported-and-tested-by: syzbot+df3f3ef31f60781fa911@syzkaller.appspotmail.com
Fixes: 8f5de6fb ("ptp: support multiple timestamp event readers")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_CD19564FFE8DA8A5918DFE92325D92DD8107@qq.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Firstly, queue is not the memory allocated in ptp_read;
Secondly, other processes may block at ptp_read and wait for conditions to be
met to perform read operations.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reported-and-tested-by: syzbot+df3f3ef31f60781fa911@syzkaller.appspotmail.com
Fixes: 8f5de6fb ("ptp: support multiple timestamp event readers")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_18747D76F1675A3C633772960237544AAA09@qq.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-11-06 (ice)

This series contains updates to ice driver only.

Dave removes SR-IOV LAG attribute for only the interface being disabled
to allow for proper unwinding of all interfaces.

Michal Schmidt changes some LAG allocations from GFP_KERNEL to GFP_ATOMIC
due to non-allowed sleeping.

Aniruddha and Marcin fix redirection and drop rules for switchdev by
properly setting and marking egress/ingress type.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix VF-VF direction matching in drop rule in switchdev
  ice: Fix VF-VF filter rules in switchdev mode
  ice: lag: in RCU, use atomic allocation
  ice: Fix SRIOV LAG disable on non-compliant aggregate
====================

Link: https://lore.kernel.org/r/20231107004844.655549-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>