Pull ARM SoC fixes from Arnd BergmannL
 "The introduction of vmap-stack on 32-bit arm caused a regression on a
  few omap3/omap4 machines that pass a stack variable into a firmware
  interface.

  The early pre-ACPI AMD Seattle machines have been broken for a while,
  Ard Biesheuvel has a series to bring them back for now.

  A few machines with multiple DMA channels used on a device have the
  channels in the wrong order according to the binding, which causes a
  harmless warning. Reversing the order is easier than fixing the tools
  to suppress the warning"

* tag 'soc-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: ls1046a: Update i2c node dma properties
  arm64: dts: ls1043a: Update i2c dma properties
  ARM: dts: spear1340: Update serial node properties
  ARM: dts: spear13xx: Update SPI dma properties
  ARM: OMAP2+: Fix regression for smc calls for vmap stack
  dt: amd-seattle: add a description of the CPUs and caches
  dt: amd-seattle: disable IPMI controller and some GPIO blocks on B0
  dt: amd-seattle: add description of the SATA/CCP SMMUs
  dt: amd-seattle: add a description of the PCIe SMMU
  dt: amd-seattle: fix PCIe legacy interrupt routing
  dt: amd-seattle: upgrade AMD Seattle XGBE to new SMMU binding
  dt: amd-seattle: remove Overdrive revision A0 support
  dt: amd-seattle: remove Husky platform

Merge still more updates from Andrew Morton:
 "16 patches.

  Subsystems affected by this patch series: ofs2, nilfs2, mailmap, and
  mm (madvise, mlock, mfence, memory-failure, kasan, debug, kmemleak,
  and damon)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/damon: prevent activated scheme from sleeping by deactivated schemes
  mm/kmemleak: reset tag when compare object pointer
  doc/vm/page_owner.rst: remove content related to -c option
  tools/vm/page_owner_sort.c: remove -c option
  mm, kasan: fix __GFP_BITS_SHIFT definition breaking LOCKDEP
  mm,hwpoison: unmap poisoned page before invalidation
  mailmap: update Kirill's email
  mm: kfence: fix objcgs vector allocation
  mm/munlock: protect the per-CPU pagevec by a local_lock_t
  mm/munlock: update Documentation/vm/unevictable-lru.rst
  mm/munlock: add lru_add_drain() to fix memcg_stat_test
  nilfs2: get rid of nilfs_mapping_init()
  nilfs2: fix lockdep warnings during disk space reclamation
  nilfs2: fix lockdep warnings in page operations for btree nodes
  ocfs2: fix crash when mount with quota enabled
  Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"

In the DAMON, the minimum wait time of the schemes decides whether the
kernel wakes up 'kdamon_fn()'.  But since the minimum wait time is
initialized to zero, there are corner cases against the original
objective.

For example, if we have several schemes for one target, and if the wait
time of the first scheme is zero, the minimum wait time will set zero,
which means 'kdamond_fn()' should wake up to apply this scheme.
However, in the following scheme, wait time can be set to non-zero.
Thus, the mininum wait time will be set to non-zero, which can cause
sleeping this interval for 'kdamon_fn()' due to one deactivated last
scheme.

This commit prevents making DAMON monitoring inactive state due to other
deactivated schemes.

Link: https://lkml.kernel.org/r/20220330105302.32114-1-tome01@ajou.ac.krSigned-off-by: Jonghyeon Kim <tome01@ajou.ac.kr>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When we use HW-tag based kasan and enable vmalloc support, we hit the
following bug.  It is due to comparison between tagged object and
non-tagged pointer.

We need to reset the kasan tag when we need to compare tagged object and
non-tagged pointer.

  kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440
  CPU: 4 PID: 1 Comm: init Tainted: G S      W         5.15.25-android13-0-g5cacf919c2bc #1
  Hardware name: MT6983(ENG) (DT)
  Call trace:
   add_scan_area+0xc4/0x244
   kmemleak_scan_area+0x40/0x9c
   layout_and_allocate+0x1e8/0x288
   load_module+0x2c8/0xf00
   __se_sys_finit_module+0x190/0x1d0
   __arm64_sys_finit_module+0x20/0x30
   invoke_syscall+0x60/0x170
   el0_svc_common+0xc8/0x114
   do_el0_svc+0x28/0xa0
   el0_svc+0x60/0xf8
   el0t_64_sync_handler+0x88/0xec
   el0t_64_sync+0x1b4/0x1b8
  kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768):
  kmemleak: [name:kmemleak&]  comm "init", pid 1, jiffies 4294894197
  kmemleak: [name:kmemleak&]  min_count = 0
  kmemleak: [name:kmemleak&]  count = 0
  kmemleak: [name:kmemleak&]  flags = 0x1
  kmemleak: [name:kmemleak&]  checksum = 0
  kmemleak: [name:kmemleak&]  backtrace:
       module_alloc+0x9c/0x120
       move_module+0x34/0x19c
       layout_and_allocate+0x1c4/0x288
       load_module+0x2c8/0xf00
       __se_sys_finit_module+0x190/0x1d0
       __arm64_sys_finit_module+0x20/0x30
       invoke_syscall+0x60/0x170
       el0_svc_common+0xc8/0x114
       do_el0_svc+0x28/0xa0
       el0_svc+0x60/0xf8
       el0t_64_sync_handler+0x88/0xec
       el0t_64_sync+0x1b4/0x1b8

Link: https://lkml.kernel.org/r/20220318034051.30687-1-Kuan-Ying.Lee@mediatek.comSigned-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

-c option has been removed from page_owner_sort.c.

Remove the usage of -c option from Documentation.

This work is coauthored by
        Shenghong Han
        Yixuan Cao
        Chongxi Zhao
        Jiajian Ye
        Yuhong Feng
        Yongqiang Liu

Link: https://lkml.kernel.org/r/20220326085920.1470081-2-zhangyinan2019@email.szu.edu.cnSigned-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The -c option is used to cull by stacktrace.  Now, --cull option has
been Added in page_owner_sort.c.  Culling by stacktrace is one of the
function of "--cull".  No need to set an extra parameter.  So remove -c
option.

Remove parsing of -c when parse parameter and remove "-c" from usage.

This work is coauthored by
        Shenghong Han
        Yixuan Cao
        Chongxi Zhao
        Jiajian Ye
        Yuhong Feng
        Yongqiang Liu

Link: https://lkml.kernel.org/r/20220326085920.1470081-1-zhangyinan2019@email.szu.edu.cnSigned-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KASAN changes that added new GFP flags mistakenly updated
__GFP_BITS_SHIFT as the total number of GFP bits instead of as a shift
used to define __GFP_BITS_MASK.

This broke LOCKDEP, as __GFP_BITS_MASK now gets the 25th bit enabled
instead of the 28th for __GFP_NOLOCKDEP.

Update __GFP_BITS_SHIFT to always count KASAN GFP bits.

In the future, we could handle all combinations of KASAN and LOCKDEP to
occupy as few bits as possible.  For now, we have enough GFP bits to be
inefficient in this quick fix.

Link: https://lkml.kernel.org/r/462ff52742a1fcc95a69778685737f723ee4dfb3.1648400273.git.andreyknvl@google.com
Fixes: 9353ffa6 ("kasan, page_alloc: allow skipping memory init for HW_TAGS")
Fixes: 53ae233c ("kasan, page_alloc: allow skipping unpoisoning for HW_TAGS")
Fixes: f49d9c5b ("kasan, mm: only define ___GFP_SKIP_KASAN_POISON with HW_TAGS")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In some cases it appears the invalidation of a hwpoisoned page fails
because the page is still mapped in another process.  This can cause a
program to be continuously restarted and die when it page faults on the
page that was not invalidated.  Avoid that problem by unmapping the
hwpoisoned page when we find it.

Another issue is that sometimes we end up oopsing in finish_fault, if
the code tries to do something with the now-NULL vmf->page.  I did not
hit this error when submitting the previous patch because there are
several opportunities for alloc_set_pte to bail out before accessing
vmf->page, and that apparently happened on those systems, and most of
the time on other systems, too.

However, across several million systems that error does occur a handful
of times a day.  It can be avoided by returning VM_FAULT_NOPAGE which
will cause do_read_fault to return before calling finish_fault.

Link: https://lkml.kernel.org/r/20220325161428.5068d97e@imladris.surriel.com
Fixes: e53ac737 ("mm: invalidate hwpoison page cache page in fault path")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

My new email address is kirill.tkhai@openvz.org.

Link: https://lkml.kernel.org/r/164846762354.278960.13129571556274098855.stgit@proSigned-off-by: Kirill Tkhai <kirill.tkhai@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the kfence object is allocated to be used for objects vector, then
this slot of the pool eventually being occupied permanently since the
vector is never freed.  The solutions could be (1) freeing vector when
the kfence object is freed or (2) allocating all vectors statically.

Since the memory consumption of object vectors is low, it is better to
chose (2) to fix the issue and it is also can reduce overhead of vectors
allocating in the future.

Link: https://lkml.kernel.org/r/20220328132843.16624-1-songmuchun@bytedance.com
Fixes: d3fb45f3 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The access to mlock_pvec is protected by disabling preemption via
get_cpu_var() or implicit by having preemption disabled by the caller
(in mlock_page_drain() case).  This breaks on PREEMPT_RT since
folio_lruvec_lock_irq() acquires a sleeping lock in this section.

Create struct mlock_pvec which consits of the local_lock_t and the
pagevec.  Acquire the local_lock() before accessing the per-CPU pagevec.
Replace mlock_page_drain() with a _local() version which is invoked on
the local CPU and acquires the local_lock_t and a _remote() version
which uses the pagevec from a remote CPU which offline.

Link: https://lkml.kernel.org/r/YjizWi9IY0mpvIfb@linutronix.deSigned-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update Documentation/vm/unevictable-lru.rst to reflect the changes made
by the mm/munlock series: keeping an mlock_count instead of page_mlock()
(formerly try_to_munlock()) and munlock_vma_pages_all() etc.  Also make
other little updates or cleanups wherever noticed.

But, I apologize, this is already out of date, in that "folio" appears
nowhere: 5.18 will be in a transitional state from "page" to "folio",
and documenting its current mix of the two does not help to understand
"the Unevictable LRU".  Should be revisited when naming is more settled.

Link: https://lkml.kernel.org/r/3753962-d491-bf60-f59f-51bfe84fd6a0@google.comSigned-off-by: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mike reports that LTP memcg_stat_test usually leads to

  memcg_stat_test 3 TINFO: Test unevictable with MAP_LOCKED
  memcg_stat_test 3 TINFO: Running memcg_process --mmap-lock1 -s 135168
  memcg_stat_test 3 TINFO: Warming up pid: 3460
  memcg_stat_test 3 TINFO: Process is still here after warm up: 3460
  memcg_stat_test 3 TFAIL: unevictable is 122880, 135168 expected

but may also lead to

  memcg_stat_test 4 TINFO: Test unevictable with mlock
  memcg_stat_test 4 TINFO: Running memcg_process --mmap-lock2 -s 135168
  memcg_stat_test 4 TINFO: Warming up pid: 4271
  memcg_stat_test 4 TINFO: Process is still here after warm up: 4271
  memcg_stat_test 4 TFAIL: unevictable is 122880, 135168 expected

or both.  A wee bit flaky.

follow_page_pte() used to have an lru_add_drain() per each page mlocked,
and the test came to rely on accurate stats.  The pagevec to be drained
is different now, but still covered by lru_add_drain(); and, never mind
the test, I believe it's in everyone's interest that a bulk faulting
interface like populate_vma_page_range() or faultin_vma_page_range()
should drain its local pagevecs at the end, to save others sometimes
needing the much more expensive lru_add_drain_all().

This does not absolutely guarantee exact stats - the mlocking task can
be migrated between CPUs as it proceeds - but it's good enough and the
tests pass.

Link: https://lkml.kernel.org/r/47f6d39c-a075-50cb-1cfb-26dd957a48af@google.com
Fixes: b67bf49c ("mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After applying the lockdep warning fixes, nilfs_mapping_init() is no
longer used, so delete it.

Link: https://lkml.kernel.org/r/1647867427-30498-4-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hao Sun <sunhao.th@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During disk space reclamation, nilfs2 still emits the following lockdep
warning due to page/folio operations on shadowed page caches that nilfs2
uses to get a snapshot of DAT file in memory:

  WARNING: CPU: 0 PID: 2643 at include/linux/backing-dev.h:272 __folio_mark_dirty+0x645/0x670
  ...
  RIP: 0010:__folio_mark_dirty+0x645/0x670
  ...
  Call Trace:
    filemap_dirty_folio+0x74/0xd0
    __set_page_dirty_nobuffers+0x85/0xb0
    nilfs_copy_dirty_pages+0x288/0x510 [nilfs2]
    nilfs_mdt_save_to_shadow_map+0x50/0xe0 [nilfs2]
    nilfs_clean_segments+0xee/0x5d0 [nilfs2]
    nilfs_ioctl_clean_segments.isra.19+0xb08/0xf40 [nilfs2]
    nilfs_ioctl+0xc52/0xfb0 [nilfs2]
    __x64_sys_ioctl+0x11d/0x170

This fixes the remaining warning by using inode objects to hold those
page caches.

Link: https://lkml.kernel.org/r/1647867427-30498-3-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "nilfs2 lockdep warning fixes".

The first two are to resolve the lockdep warning issue, and the last one
is the accompanying cleanup and low priority.

Based on your comment, this series solves the issue by separating inode
object as needed.  Since I was worried about the impact of the object
composition changes, I tested the series carefully not to cause
regressions especially for delicate functions such like disk space
reclamation and snapshots.

This patch (of 3):

If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at
inode_to_wb() during page/folio operations for btree nodes:

  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline]
  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline]
  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
  Modules linked in:
  ...
  RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline]
  RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline]
  RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
  ...
  Call Trace:
    __set_page_dirty include/linux/pagemap.h:834 [inline]
    mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145
    nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline]
    nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085
    nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
    nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625
    nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009
    nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048
    nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline]
    nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline]
    nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036
    nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372
    nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline]
    nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563
    kthread+0x405/0x4f0 kernel/kthread.c:327
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

This is because nilfs2 uses two page caches for each inode and
inode->i_mapping never points to one of them, the btree node cache.

This causes inode_to_wb(inode) to refer to a different page cache than
the caller page/folio operations such like __folio_start_writeback(),
__folio_end_writeback(), or __folio_mark_dirty() acquired the lock.

This patch resolves the issue by allocating and using an additional
inode to hold the page cache of btree nodes.  The inode is attached
one-to-one to the traditional nilfs2 inode if it requires a block
mapping with b-tree.  This setup change is in memory only and does not
affect the disk format.

Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com
Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org
Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com
Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a reported crash when mounting ocfs2 with quota enabled.

  RIP: 0010:ocfs2_qinfo_lock_res_init+0x44/0x50 [ocfs2]
  Call Trace:
    ocfs2_local_read_info+0xb9/0x6f0 [ocfs2]
    dquot_load_quota_sb+0x216/0x470
    dquot_load_quota_inode+0x85/0x100
    ocfs2_enable_quotas+0xa0/0x1c0 [ocfs2]
    ocfs2_fill_super.cold+0xc8/0x1bf [ocfs2]
    mount_bdev+0x185/0x1b0
    legacy_get_tree+0x27/0x40
    vfs_get_tree+0x25/0xb0
    path_mount+0x465/0xac0
    __x64_sys_mount+0x103/0x140

It is caused by when initializing dqi_gqlock, the corresponding dqi_type
and dqi_sb are not properly initialized.

This issue is introduced by commit 6c85c2c7, which wants to avoid
accessing uninitialized variables in error cases.  So make global quota
info properly initialized.

Link: https://lkml.kernel.org/r/20220323023644.40084-1-joseph.qi@linux.alibaba.com
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1007141
Fixes: 6c85c2c7 ("ocfs2: quota_local: fix possible uninitialized-variable access in ocfs2_local_read_info()")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Dayvison <sathlerds@gmail.com>
Tested-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 08095d63 ("mm: madvise: skip unmapped vma holes
passed to process_madvise") as process_madvise() fails to return the
exact processed bytes in other cases too.

As an example: if process_madvise() hits mlocked pages after processing
some initial bytes passed in [start, end), it just returns EINVAL
although some bytes are processed.  Thus making an exception only for
ENOMEM is partially fixing the problem of returning the proper advised
bytes.

Thus revert this patch and return proper bytes advised.

Link: https://lkml.kernel.org/r/e73da1304a88b6a8a11907045117cccf4c2b8374.1648046642.git.quic_charante@quicinc.com
Fixes: 08095d63 ("mm: madvise: skip unmapped vma holes passed to process_madvise")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "Just a few fixes that have been gathered since the previous pull:

   - An additional fix for potential PCM deadlocks

   - A series of HD-audio CS8409 codec patches for new models

   - Other device specific fixes for HD-audio, ASoC mediatek, Intel,
     fsl, rockchip"

* tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
  ALSA: hda: Avoid unsol event during RPM suspending
  ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
  ALSA: hda/cs8409: Add new Dolphin HW variants
  ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg
  ALSA: hda/cs8409: Support new Warlock MLK Variants
  ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants
  ALSA: hda/cs8409: Re-order quirk table into ascending order
  ALSA: hda/cs8409: Fix Warlock to use mono mic configuration
  ALSA: cs4236: fix an incorrect NULL check on list iterator
  ALSA: hda/realtek: Enable headset mic on Lenovo P360
  ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
  ALSA: hda/realtek: Add mute and micmut LED support for Zbook Fury 17 G9
  ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B
  ASoC: fsl-asoc-card: Fix jack_event() always return 0
  ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs

Pull gpio fixes from Bartosz Golaszewski:

 - grammar and formatting fixes in comments for gpio-ts4900

 - correct links in gpio-ts5500

 - fix a warning in doc generation for the core GPIO documentation

* tag 'gpio-fixes-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: ts5500: Fix Links to Technologic Systems web resources
  gpio: Properly document parent data union
  gpio: ts4900: Fix comment formatting and grammar

Pull input updates from Dmitry Torokhov:

 - a revert of a patch resetting extra buttons on touchpads claiming to
   be buttonpads as this caused regression on certain Dell devices

 - a new driver for Mediatek MT6779 keypad

 - a new driver for Imagis touchscreen

 - rework of Google/Chrome OS "Vivaldi" keyboard handling

 - assorted driver fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (31 commits)
  Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
  Input: adi - remove redundant variable z
  Input: add Imagis touchscreen driver
  dt-bindings: input/touchscreen: bindings for Imagis
  Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMD
  Input: stmfts - fix reference leak in stmfts_input_open
  Input: add bounds checking to input_set_capability()
  Input: iqs5xx - use local input_dev pointer
  HID: google: modify HID device groups of eel
  HID: google: Add support for vivaldi to hid-hammer
  HID: google: extract Vivaldi hid feature mapping for use in hid-hammer
  Input: extract ChromeOS vivaldi physmap show function
  HID: google: switch to devm when registering keyboard backlight LED
  Input: mt6779-keypad - fix signedness bug
  Input: mt6779-keypad - add MediaTek keypad driver
  dt-bindings: input: Add bindings for Mediatek matrix keypad
  Input: da9063 - use devm_delayed_work_autocancel()
  Input: goodix - fix race on driver unbind
  Input: goodix - use input_copy_abs() helper
  Input: add input_copy_abs() function
  ...

Pull RTC updates from Alexandre Belloni:
 "The bulk of the patches are about replacing the uie_unsupported struct
  rtc_device member by a feature bit.

  Subsystem:

   - remove uie_unsupported, all users have been converted to clear
     RTC_FEATURE_UPDATE_INTERRUPT and provide a reason

   - RTCs with an alarm with a resolution of a minute are now letting
     the core handle rounding down the alarm time

   - fix use-after-free on device removal

  New driver:

   - OP-TEE RTC PTA

  Drivers:

   - sun6i: Add H616 support

   - cmos: Fix the AltCentury for AMD platforms

   - spear: set range"

* tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits)
  rtc: check if __rtc_read_time was successful
  rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
  rtc: mc146818-lib: Fix the AltCentury for AMD platforms
  rtc: optee: add RTC driver for OP-TEE RTC PTA
  rtc: pm8xxx: Return -ENODEV if set_time disallowed
  rtc: pm8xxx: Attach wake irq to device
  clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h
  rtc: remove uie_unsupported
  rtc: xgene: stop using uie_unsupported
  rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
  rtc: hym8563: let the core handle the alarm resolution
  rtc: hym8563: switch to devm_rtc_allocate_device
  rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
  rtc: efi: switch to devm_rtc_allocate_device
  rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature
  rtc: spear: fix spear_rtc_read_time
  rtc: spear: drop uie_unsupported
  rtc: spear: set range
  rtc: spear: switch to devm_rtc_allocate_device
  rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
  ...

This reverts commit 37ef4c19.

The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.

In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:

	[Precision 7x50 Touchpad]
	MatchBus=i2c
	MatchUdevType=touchpad
	MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50*
	AttrInputPropDisable=INPUT_PROP_BUTTONPAD

However, because of the change introduced in 37ef4c19 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.

In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull UML updates from Richard Weinberger:

 - Devicetree support (for testing)

 - Various cleanups and fixes: UBD, port_user, uml_mconsole

 - Maintainer update

* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: run_helper: Write error message to kernel log on exec failure on host
  um: port_user: Improve error handling when port-helper is not found
  um: port_user: Allow setting path to port-helper using UML_PORT_HELPER envvar
  um: port_user: Search for in.telnetd in PATH
  um: clang: Strip out -mno-global-merge from USER_CFLAGS
  docs: UML: Mention telnetd for port channel
  um: Remove unused timeval_to_ns() function
  um: Fix uml_mconsole stop/go
  um: Cleanup syscall_handler_t definition/cast, fix warning
  uml: net: vector: fix const issue
  um: Fix WRITE_ZEROES in the UBD Driver
  um: Migrate vector drivers to NAPI
  um: Fix order of dtb unflatten/early init
  um: fix and optimize xor select template for CONFIG64 and timetravel mode
  um: Document dtb command line option
  lib/logic_iomem: correct fallback config references
  um: Remove duplicated include in syscalls_64.c
  MAINTAINERS: Update UserModeLinux entry

Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
 "JFFS2:
   - Fixes for various memory issues

  UBI:
   - Fix for a race condition in cdev ioctl handler

  UBIFS:
   - Fixes for O_TMPFILE and whiteout handling

   - Fixes for various memory issues"

* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: rename_whiteout: correct old_dir size computing
  jffs2: fix memory leak in jffs2_scan_medium
  jffs2: fix memory leak in jffs2_do_mount_fs
  jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
  fs/jffs2: fix comments mentioning i_mutex
  ubi: fastmap: Return error code if memory allocation fails in add_aeb()
  ubifs: Fix to add refcount once page is set private
  ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
  ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
  ubifs: Rectify space amount budget for mkdir/tmpfile operations
  ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work
  ubifs: Rename whiteout atomically
  ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
  ubifs: Fix wrong number of inodes locked by ui_mutex in ubifs_inode comment
  ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
  ubifs: rename_whiteout: Fix double free for whiteout_ui->data
  ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl

Pull gfs2 fixes from Andreas Gruenbacher:

 - To avoid deadlocks, actively cancel dlm locking requests when we give
   up on them.

   Further dlm operations on the same lock will return -EBUSY until the
   cancel has been completed, so in that case, wait and repeat. (This is
   rare.)

 - Lock inversion fixes in gfs2_inode_lookup() and gfs2_create_inode().

 - Some more fallout from the gfs2 mmap + page fault deadlock fixes
   (merged in commit c03098d4: "Merge tag 'gfs2-v5.15-rc5-mmap-fault'").

 - Various other minor bug fixes and cleanups.

* tag 'gfs2-v5.17-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Make sure FITRIM minlen is rounded up to fs block size
  gfs2: Make sure not to return short direct writes
  gfs2: Remove dead code in gfs2_file_read_iter
  gfs2: Fix gfs2_file_buffered_write endless loop workaround
  gfs2: Minor retry logic cleanup
  gfs2: Disable page faults during lockless buffered reads
  gfs2: Fix should_fault_in_pages() logic
  gfs2: Remove return value for gfs2_indirect_init
  gfs2: Initialize gh_error in gfs2_glock_nq
  gfs2: Make use of list_is_first
  gfs2: Switch lock order of inode and iopen glock
  gfs2: cancel timed-out glock requests
  gfs2: Expect -EBUSY after canceling dlm locking requests
  gfs2: gfs2_setattr_size error path fix
  gfs2: assign rgrp glock before compute_bitstructs

Pull netfs updates from David Howells:
 "Netfs prep for write helpers.

  Having had a go at implementing write helpers and content encryption
  support in netfslib, it seems that the netfs_read_{,sub}request
  structs and the equivalent write request structs were almost the same
  and so should be merged, thereby requiring only one set of
  alloc/get/put functions and a common set of tracepoints.

  Merging the structs also has the advantage that if a bounce buffer is
  added to the request struct, a read operation can be performed to fill
  the bounce buffer, the contents of the buffer can be modified and then
  a write operation can be performed on it to send the data wherever it
  needs to go using the same request structure all the way through. The
  I/O handlers would then transparently perform any required crypto.
  This should make it easier to perform RMW cycles if needed.

  The potentially common functions and structs, however, by their names
  all proclaim themselves to be associated with the read side of things.

  The bulk of these changes alter this in the following ways:

   - Rename struct netfs_read_{,sub}request to netfs_io_{,sub}request.

   - Rename some enums, members and flags to make them more appropriate.

   - Adjust some comments to match.

   - Drop "read"/"rreq" from the names of common functions. For
     instance, netfs_get_read_request() becomes netfs_get_request().

   - The ->init_rreq() and ->issue_op() methods become ->init_request()
     and ->issue_read(). I've kept the latter as a read-specific
     function and in another branch added an ->issue_write() method.

  The driver source is then reorganised into a number of files:

        fs/netfs/buffered_read.c        Create read reqs to the pagecache
        fs/netfs/io.c                   Dispatchers for read and write reqs
        fs/netfs/main.c                 Some general miscellaneous bits
        fs/netfs/objects.c              Alloc, get and put functions
        fs/netfs/stats.c                Optional procfs statistics.

  and future development can be fitted into this scheme, e.g.:

        fs/netfs/buffered_write.c       Modify the pagecache
        fs/netfs/buffered_flush.c       Writeback from the pagecache
        fs/netfs/direct_read.c          DIO read support
        fs/netfs/direct_write.c         DIO write support
        fs/netfs/unbuffered_write.c     Write modifications directly back

  Beyond the above changes, there are also some changes that affect how
  things work:

   - Make fscache_end_operation() generally available.

   - In the netfs tracing header, generate enums from the symbol ->
     string mapping tables rather than manually coding them.

   - Add a struct for filesystems that uses netfslib to put into their
     inode wrapper structs to hold extra state that netfslib is
     interested in, such as the fscache cookie. This allows netfslib
     functions to be set in filesystem operation tables and jumped to
     directly without having to have a filesystem wrapper.

   - Add a member to the struct added above to track the remote inode
     length as that may differ if local modifications are buffered. We
     may need to supply an appropriate EOF pointer when storing data (in
     AFS for example).

   - Pass extra information to netfs_alloc_request() so that the
     ->init_request() hook can access it and retain information to
     indicate the origin of the operation.

   - Make the ->init_request() hook return an error, thereby allowing a
     filesystem that isn't allowed to cache an inode (ceph or cifs, for
     example) to skip readahead.

   - Switch to using refcount_t for subrequests and add tracepoints to
     log refcount changes for the request and subrequest structs.

   - Add a function to consolidate dispatching a read request. Similar
     code is used in three places and another couple are likely to be
     added in the future"

Link: https://lore.kernel.org/all/2639515.1648483225@warthog.procyon.org.uk/

* tag 'netfs-prep-20220318' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Maintain netfs_i_context::remote_i_size
  netfs: Keep track of the actual remote file size
  netfs: Split some core bits out into their own file
  netfs: Split fs/netfs/read_helper.c
  netfs: Rename read_helper.c to io.c
  netfs: Prepare to split read_helper.c
  netfs: Add a function to consolidate beginning a read
  netfs: Add a netfs inode context
  ceph: Make ceph_init_request() check caps on readahead
  netfs: Change ->init_request() to return an error code
  netfs: Refactor arguments for netfs_alloc_read_request
  netfs: Adjust the netfs_failure tracepoint to indicate non-subreq lines
  netfs: Trace refcounting on the netfs_io_subrequest struct
  netfs: Trace refcounting on the netfs_io_request struct
  netfs: Adjust the netfs_rreq tracepoint slightly
  netfs: Split netfs_io_* object handling out
  netfs: Finish off rename of netfs_read_request to netfs_io_request
  netfs: Rename netfs_read_*request to netfs_io_*request
  netfs: Generate enums from trace symbol mapping lists
  fscache: export fscache_end_operation()

Reorder dmas and dma-names properties for i2c controller node to make it
compliant with bindings.

Fixes: 8126d881 ("arm64: dts: add QorIQ LS1046A SoC support")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
CC: soc@kernel.org
Link: https://lore.kernel.org/r/20220326042313.97862-5-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reorder dmas and dma-names properties for i2c controller node to make it
compliant with bindings.

Fixes: 6d453cd2 ("arm64: dts: add Freescale LS1043a SoC support")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
CC: soc@kernel.org
Link: https://lore.kernel.org/r/20220326042313.97862-4-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reorder dma and dma-names property for serial node to make it compliant
with bindings.

Fixes: 6e8887f6 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-3-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reorder dmas and dma-names property for spi controller node to make it
compliant with bindings.

Fixes: 6e8887f6 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-2-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull random number generator fixes from Jason Donenfeld:

 - If a hardware random number generator passes a sufficiently large
   chunk of entropy to random.c during early boot, we now skip the
   "fast_init" business and let it initialize the RNG.

   This makes CONFIG_RANDOM_TRUST_BOOTLOADER=y actually useful.

 - We already have the command line `random.trust_cpu=0/1` option for
   RDRAND, which let distros enable CONFIG_RANDOM_TRUST_CPU=y while
   placating concerns of more paranoid users.

   Now we add `random.trust_bootloader=0/1` so that distros can
   similarly enable CONFIG_RANDOM_TRUST_BOOTLOADER=y.

 - Re-add a comment that got removed by accident in the recent revert.

 - Add the spec-compliant ACPI CID for vmgenid, which Microsoft added to
   the vmgenid spec at Ard's request during earlier review.

 - Restore build-time randomness via the latent entropy plugin, which
   was lost when we transitioned to using a hash function.

* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: mix build-time latent entropy into pool at init
  virt: vmgenid: recognize new CID added by Hyper-V
  random: re-add removed comment about get_random_{u32,u64} reseeding
  random: treat bootloader trust toggle the same way as cpu trust toggle
  random: skip fast_init if hwrng provides large chunk of entropy

Pull watchdog updates from Wim Van Sebroeck:

 - add support for BCM4908

 - renesas_wdt: add R-Car Gen4 support

 - improve watchdog_dev function documentation

 - sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during
   initialization

 - several other small improvements and fixes

* tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  Watchdog: sp5100_tco: Enable Family 17h+ CPUs
  Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  Watchdog: sp5100_tco: Refactor MMIO base address initialization
  Watchdog: sp5100_tco: Move timer initialization into function
  watchdog: ixp4xx: Implement restart
  watchdog: orion_wdt: support pretimeout on Armada-XP
  watchdog: allow building BCM7038_WDT for BCM4908
  watchdog: renesas_wdt: Add R-Car Gen4 support
  dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
  watchdog: Improve watchdog_dev function documentation
  watchdog: aspeed: add nowayout support
  watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
  watchdog: imx2_wdg: Alow ping on suspend

Pull auxdisplay updates from Miguel Ojeda:
 "A few auxdisplay lcd2s improvements from Andy Shevchenko"

* tag 'auxdisplay-for-linus-v5.18-rc1' of https://github.com/ojeda/linux:
  auxdisplay: lcd2s: Use array size explicitly in lcd2s_gotoxy()
  auxdisplay: lcd2s: Switch to i2c ->probe_new()
  auxdisplay: lcd2s: use module_i2c_driver to simplify the code
  auxdisplay: lcd2s: make use of device property API
  auxdisplay: lcd2s: Fix multi-line comment style

Pull virtio updates from Michael Tsirkin:

 - vdpa generic device type support

 - more virtio hardening for broken devices (but on the same theme,
   revert some virtio hotplug hardening patches - they were misusing
   some interrupt flags and had to be reverted)

 - RSS support in virtio-net

 - max device MTU support in mlx5 vdpa

 - akcipher support in virtio-crypto

 - shared IRQ support in ifcvf vdpa

 - a minor performance improvement in vhost

 - enable virtio mem for ARM64

 - beginnings of advance dma support

 - cleanups, fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
  vdpa/mlx5: Avoid processing works if workqueue was destroyed
  vhost: handle error while adding split ranges to iotlb
  vdpa: support exposing the count of vqs to userspace
  vdpa: change the type of nvqs to u32
  vdpa: support exposing the config size to userspace
  vdpa/mlx5: re-create forwarding rules after mac modified
  virtio: pci: check bar values read from virtio config space
  Revert "virtio_pci: harden MSI-X interrupts"
  Revert "virtio-pci: harden INTX interrupts"
  drivers/net/virtio_net: Added RSS hash report control.
  drivers/net/virtio_net: Added RSS hash report.
  drivers/net/virtio_net: Added basic RSS support.
  drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
  virtio: use virtio_device_ready() in virtio_device_restore()
  tools/virtio: compile with -pthread
  tools/virtio: fix after premapped buf support
  virtio_ring: remove flags check for unmap packed indirect desc
  virtio_ring: remove flags check for unmap split indirect desc
  virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
  net/mlx5: Add support for configuring max device MTU
  ...

Prior, the "input_pool_data" array needed no real initialization, and so
it was easy to mark it with __latent_entropy to populate it during
compile-time. In switching to using a hash function, this required us to
specifically initialize it to some specific state, which means we
dropped the __latent_entropy attribute. An unfortunate side effect was
this meant the pool was no longer seeded using compile-time random data.
In order to bring this back, we declare an array in rand_initialize()
with __latent_entropy and call mix_pool_bytes() on that at init, which
accomplishes the same thing as before. We make this __initconst, so that
it doesn't take up space at runtime after init.

Fixes: 6e8ec255 ("random: use computational hash for entropy extraction")
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Commit 9c46929e ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor
systems") started triggering an issue with smc calls hanging on boot as
VMAP_STACK is now enabled by default.

Based on discussions on the #armlinux irc channel, Arnd noticed that omaps
are using __pa() for stack for smc calls. This does not work with vmap
stack.

Let's fix the issue by changing the param arrays to use static param[5] for
each function for __pa() to work. This consumes a bit more memory compared
to adding a single static buffer, but avoids potential races with the smc
calls initializing the shared buffer. For omap_secure_dispatcher(), we need
to use a cpu specific buffer as there's nothing currently ensuring it only
gets called from cpu0.

Fixes: 9c46929e ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems")
Link: https://lore.kernel.org/r/20220331171737.48211-1-tony@atomide.comSuggested-by: Ard Biesheuvel <ardb@kernel.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull more ACPI updates from Rafael Wysocki:
 "These are fixes and cleanup on top of the previously merged ACPI
  material.

  Specifics:

   - Avoid out-of-bounds access when parsing _CPC data (Rafael Wysocki)

   - Change default error code and clean up debug messages in ACPI CPPC
     probe (Rafael Wysocki)

   - Replace usage of found with dedicated list iterator variable in the
     ACPI IPMI driver (Jakob Koschel)

   - Clean up variable name confusion in APEI (Jakob Koschel)

   - Make LAPIC_ADDR_OVR address readable in a message parsed during
     MADT parsing (Vasant Hegde)"

* tag 'acpi-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: CPPC: Change default error code and clean up debug messages in probe
  ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
  ACPI: tables: Make LAPIC_ADDR_OVR address readable in message
  ACPI: IPMI: replace usage of found with dedicated list iterator variable
  ACPI, APEI: Use the correct variable for sizeof()

Pull more documentation updates from Jonathan Corbet:
 "Some late-arriving documentation improvements.

  This is mostly build-system fixes from Mauro and Akira; I also took
  the liberty of dropping in my 'messy diffstat' document"

* tag 'docs-5.18-2' of git://git.lwn.net/linux:
  docs: Add a document on how to fix a messy diffstat
  docs: sphinx/requirements: Limit jinja2<3.1
  Documentation: kunit: Fix cross-referencing warnings
  scripts/kernel-doc: change the line number meta info
  scripts/get_abi: change the file/line number meta info
  docs: kernel_include.py: add sphinx build dependencies
  docs: kernel_abi.py: add sphinx build dependencies
  docs: kernel_feat.py: add build dependencies
  scripts/get_feat.pl: allow output the parsed file names
  docs: kfigure.py: Don't warn of missing PDF converter in 'make htmldocs'
  Documentation: Fix duplicate statement about raw_spinlock_t type

Pull Kbuild updates from Masahiro Yamada:

 - Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
   additional flags to be passed to user-space programs.

 - Fix missing fflush() bugs in Kconfig and fixdep

 - Fix a minor bug in the comment format of the .config file

 - Make kallsyms ignore llvm's local labels, .L*

 - Fix UAPI compile-test for cross-compiling with Clang

 - Extend the LLVM= syntax to support LLVM=<suffix> form for using a
   particular version of LLVm, and LLVM=<prefix> form for using custom
   LLVM in a particular directory path.

 - Clean up Makefiles

* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Make $(LLVM) more flexible
  kbuild: add --target to correctly cross-compile UAPI headers with Clang
  fixdep: use fflush() and ferror() to ensure successful write to files
  arch: syscalls: simplify uapi/kapi directory creation
  usr/include: replace extra-y with always-y
  certs: simplify empty certs creation in certs/Makefile
  certs: include certs/signing_key.x509 unconditionally
  kallsyms: ignore all local labels prefixed by '.L'
  kconfig: fix missing '# end of' for empty menu
  kconfig: add fflush() before ferror() check
  kbuild: replace $(if A,A,B) with $(or A,B)
  kbuild: Add environment variables for userprogs flags
  kbuild: unify cmd_copy and cmd_shipped