- 06 Apr, 2018 40 commits
-
-
Pavel Tatashin authored
Patch series "optimize memory hotplug", v3. This patchset: - Improves hotplug performance by eliminating a number of struct page traverses during memory hotplug. - Fixes some issues with hotplugging, where boundaries were not properly checked. And on x86 block size was not properly aligned with end of memory - Also, potentially improves boot performance by eliminating condition from __init_single_page(). - Adds robustness by verifying that that struct pages are correctly poisoned when flags are accessed. The following experiments were performed on Xeon(R) CPU E7-8895 v3 @ 2.60GHz with 1T RAM: booting in qemu with 960G of memory, time to initialize struct pages: no-kvm: TRY1 TRY2 BEFORE: 39.433668 39.39705 AFTER: 36.903781 36.989329 with-kvm: BEFORE: 10.977447 11.103164 AFTER: 10.929072 10.751885 Hotplug 896G memory: no-kvm: TRY1 TRY2 BEFORE: 848.740000 846.910000 AFTER: 783.070000 786.560000 with-kvm: TRY1 TRY2 BEFORE: 34.410000 33.57 AFTER: 29.810000 29.580000 This patch (of 6): Start qemu with the following arguments: -m 64G,slots=2,maxmem=66G -object memory-backend-ram,id=mem1,size=2G Which: boots machine with 64G, and adds a device mem1 with 2G which can be hotplugged later. Also make sure that config has the following turned on: CONFIG_MEMORY_HOTPLUG CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE CONFIG_ACPI_HOTPLUG_MEMORY Using the qemu monitor hotplug the memory (make sure config has (qemu) device_add pc-dimm,id=dimm1,memdev=mem1 The operation will fail with the following trace: WARNING: CPU: 0 PID: 91 at drivers/base/memory.c:205 pages_correctly_reserved+0xe6/0x110 Modules linked in: CPU: 0 PID: 91 Comm: systemd-udevd Not tainted 4.16.0-rc1_pt_master #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:pages_correctly_reserved+0xe6/0x110 Call Trace: memory_subsys_online+0x44/0xa0 device_online+0x51/0x80 store_mem_state+0x5e/0xe0 kernfs_fop_write+0xfa/0x170 __vfs_write+0x2e/0x150 vfs_write+0xa8/0x1a0 SyS_write+0x4d/0xb0 do_syscall_64+0x5d/0x110 entry_SYSCALL_64_after_hwframe+0x21/0x86 ---[ end trace 6203bc4f1a5d30e8 ]--- The problem is detected in: drivers/base/memory.c static bool pages_correctly_reserved(unsigned long start_pfn) 205 if (WARN_ON_ONCE(!pfn_valid(pfn))) This function loops through every section in the newly added memory block and verifies that the first pfn is valid, meaning section exists, has mapping (struct page array), and is online. The block size on x86 is usually 128M, but when machine is booted with more than 64G of memory, the block size is changed to 2G: $ cat /sys/devices/system/memory/block_size_bytes 80000000 or $ dmesg | grep "block size" [ 0.086469] x86/mm: Memory block size: 2048MB During memory hotplug, and hotremove we verify that the range is section size aligned, but we actually must verify that it is block size aligned, because that is the proper unit for hotplug operations. See: Documentation/memory-hotplug.txt So, when the start_pfn of newly added memory is not block size aligned, we can get a memory block that has only part of it with properly populated sections. In our case the start_pfn starts from the last_pfn (end of physical memory). $ dmesg | grep last_pfn [ 0.000000] e820: last_pfn = 0x1040000 max_arch_pfn = 0x400000000 0x1040000 == 65G, and so is not 2G aligned! The fix is to enforce that memory that is hotplugged and hotremoved is block size aligned. With this fix, running the above sequence yield to the following result: (qemu) device_add pc-dimm,id=dimm1,memdev=mem1 Block size [0x80000000] unaligned hotplug range: start 0x1040000000, size 0x80000000 acpi PNP0C80:00: add_memory failed acpi PNP0C80:00: acpi_memory_enable_device() error acpi PNP0C80:00: Enumeration failure Link: http://lkml.kernel.org/r/20180213193159.14606-2-pasha.tatashin@oracle.comSigned-off-by:Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yang Shi authored
For PTE-mapped THP, the compound THP has not been split to normal 4K pages yet, the whole THP is considered referenced if any one of sub page is referenced. When walking PTE-mapped THP by pvmw, all relevant PTEs will be checked to retrieve referenced bit. But, the current code just returns the result of the last PTE. If the last PTE has not referenced, the referenced flag will be cleared. Just set referenced when ptep{pmdp}_clear_young_notify() returns true. Link: http://lkml.kernel.org/r/1518212451-87134-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:Yang Shi <yang.shi@linux.alibaba.com> Reported-by:
Gang Deng <gavin.dg@linux.alibaba.com> Suggested-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
-
Pavel Tatashin authored
Deferred page initialization allows the boot cpu to initialize a small subset of the system's pages early in boot, with other cpus doing the rest later on. It is, however, problematic to know how many pages the kernel needs during boot. Different modules and kernel parameters may change the requirement, so the boot cpu either initializes too many pages or runs out of memory. To fix that, initialize early pages on demand. This ensures the kernel does the minimum amount of work to initialize pages during boot and leaves the rest to be divided in the multithreaded initialization path (deferred_init_memmap). The on-demand code is permanently disabled using static branching once deferred pages are initialized. After the static branch is changed to false, the overhead is up-to two branch-always instructions if the zone watermark check fails or if rmqueue fails. Sergey Senozhatsky noticed that while deferred pages currently make sense only on NUMA machines (we start one thread per latency node), CONFIG_NUMA is not a requirement for CONFIG_DEFERRED_STRUCT_PAGE_INIT, so that is also must be addressed in the patch. [akpm@linux-foundation.org: fix typo in comment, make deferred_pages static] [pasha.tatashin@oracle.com: fix min() type mismatch warning] Link: http://lkml.kernel.org/r/20180212164543.26592-1-pasha.tatashin@oracle.com [pasha.tatashin@oracle.com: use zone_to_nid() in deferred_grow_zone()] Link: http://lkml.kernel.org/r/20180214163343.21234-2-pasha.tatashin@oracle.com [pasha.tatashin@oracle.com: might_sleep warning] Link: http://lkml.kernel.org/r/20180306192022.28289-1-pasha.tatashin@oracle.com [akpm@linux-foundation.org: s/spin_lock/spin_lock_irq/ in page_alloc_init_late()] [pasha.tatashin@oracle.com: v5] Link: http://lkml.kernel.org/r/20180309220807.24961-3-pasha.tatashin@oracle.com [akpm@linux-foundation.org: tweak comments] [pasha.tatashin@oracle.com: v6] Link: http://lkml.kernel.org/r/20180313182355.17669-3-pasha.tatashin@oracle.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20180209192216.20509-2-pasha.tatashin@oracle.comSigned-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by:
Steven Sistare <steven.sistare@oracle.com> Reviewed-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Gioh Kim <gi-oh.kim@profitbricks.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Pavel Tatashin authored
Vlastimil Babka reported about a window issue during which when deferred pages are initialized, and the current version of on-demand initialization is finished, allocations may fail. While this is highly unlikely scenario, since this kind of allocation request must be large, and must come from interrupt handler, we still want to cover it. We solve this by initializing deferred pages with interrupts disabled, and holding node_size_lock spin lock while pages in the node are being initialized. The on-demand deferred page initialization that comes later will use the same lock, and thus synchronize with deferred_init_memmap(). It is unlikely for threads that initialize deferred pages to be interrupted. They run soon after smp_init(), but before modules are initialized, and long before user space programs. This is why there is no adverse effect of having these threads running with interrupts disabled. [pasha.tatashin@oracle.com: v6] Link: http://lkml.kernel.org/r/20180313182355.17669-2-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180309220807.24961-2-pasha.tatashin@oracle.comSigned-off-by:
-
Randy Dunlap authored
For mm/swap_slots.c, use the traditional Linux method of conditional compilation and linking instead of always compiling it by using #ifdef CONFIG_SWAP and #endif for the entire source file (excluding header files). Link: http://lkml.kernel.org/r/c2a47015-0b5a-d0d9-8bc7-9984c049df20@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Tim Chen <tim.c.chen@linux.intel.com> Reviewed-by:
-
Anshuman Khandual authored
alloc_contig_range() initiates compaction and eventual migration for the purpose of either CMA or HugeTLB allocations. At present, the reason code remains the same MR_CMA for either of these cases. Let's make it MR_CONTIG_RANGE which will appropriately reflect the reason code in both these cases. Link: http://lkml.kernel.org/r/20180202091518.18798-1-khandual@linux.vnet.ibm.comSigned-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by:
-
David Woodhouse authored
The documentation for ignore_rlimit_data says that it will print a warning at first misuse. Yet it doesn't seem to do that. Fix the code to print the warning even when we allow the process to continue. Link: http://lkml.kernel.org/r/1517935505-9321-1-git-send-email-dwmw@amazon.co.ukSigned-off-by:
David Woodhouse <dwmw@amazon.co.uk> Acked-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Colin Ian King authored
stable_node_dup() is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: mm/ksm.c:1321:13: warning: symbol 'stable_node_dup' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20180206221005.12642-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Shakeel Butt authored
The kasan quarantine is designed to delay freeing slab objects to catch use-after-free. The quarantine can be large (several percent of machine memory size). When kmem_caches are deleted related objects are flushed from the quarantine but this requires scanning the entire quarantine which can be very slow. We have seen the kernel busily working on this while holding slab_mutex and badly affecting cache_reaper, slabinfo readers and memcg kmem cache creations. It can easily reproduced by following script: yes . | head -1000000 | xargs stat > /dev/null for i in `seq 1 10`; do seq 500 | (cd /cg/memory && xargs mkdir) seq 500 | xargs -I{} sh -c 'echo $BASHPID > \ /cg/memory/{}/tasks && exec stat .' > /dev/null seq 500 | (cd /cg/memory && xargs rmdir) done The busy stack: kasan_cache_shutdown shutdown_cache memcg_destroy_kmem_caches mem_cgroup_css_free css_free_rwork_fn process_one_work worker_thread kthread ret_from_fork This patch is based on the observation that if the kmem_cache to be destroyed is empty then there should not be any objects of this cache in the quarantine. Without the patch the script got stuck for couple of hours. With the patch the script completed within a second. Link: http://lkml.kernel.org/r/20180327230603.54721-1-shakeelb@google.comSigned-off-by:Shakeel Butt <shakeelb@google.com> Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Mikulas Patocka authored
Since commit db265eca ("mm/sl[aou]b: Move duping of slab name to slab_common.c"), the kernel always duplicates the slab cache name when creating a slab cache, so the test if the slab name is accessible is useless. Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1803231133310.22626@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
-
Shakeel Butt authored
I have noticed on debug kernel with SLAB, the size of some non-root slabs were larger than their corresponding root slabs. e.g. for radix_tree_node: $cat /proc/slabinfo | grep radix name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> ... radix_tree_node 15052 15075 4096 1 1 ... $cat /cgroup/memory/temp/memory.kmem.slabinfo | grep radix name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> ... radix_tree_node 1581 158 4120 1 2 ... However for SLUB in debug kernel, the sizes were same. On further inspection it is found that SLUB always use kmem_cache.object_size to measure the kmem_cache.size while SLAB use the given kmem_cache.size. In the debug kernel the slab's size can be larger than its object_size. Thus in the creation of non-root slab, the SLAB uses the root's size as base to calculate the non-root slab's size and thus non-root slab's size can be larger than the root slab's size. For SLUB, the non-root slab's size is measured based on the root's object_size and thus the size will remain same for root and non-root slab. This patch makes slab's object_size the default base to measure the slab's size. Link: http://lkml.kernel.org/r/20180313165428.58699-1-shakeelb@google.com Fixes: 794b1248 ("memcg, slab: separate memcg vs root cache creation paths") Signed-off-by:
-
Alexey Dobriyan authored
SLAB doesn't support 4GB+ of objects per slab, therefore randomization doesn't need size_t. Link: http://lkml.kernel.org/r/20180305200730.15812-25-adobriyan@gmail.comSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
-
Alexey Dobriyan authored
Function returns size of the object without red zone which can't be negative. Link: http://lkml.kernel.org/r/20180305200730.15812-24-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
struct kmem_cache_order_objects is for mixing order and number of objects, and orders aren't big enough to warrant 64-bit width. Propagate unsignedness down so that everything fits. !!! Patch assumes that "PAGE_SIZE << order" doesn't overflow. !!! Link: http://lkml.kernel.org/r/20180305200730.15812-23-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
slab_index() returns index of an object within a slab which is at most u15 (or u16?). Iterators additionally guarantee that "p >= addr". Link: http://lkml.kernel.org/r/20180305200730.15812-22-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
If kmem case sizes are 32-bit, then usecopy region should be too. Link: http://lkml.kernel.org/r/20180305200730.15812-21-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
If SLAB doesn't support 4GB+ kmem caches (it never did), KASAN should not do it as well. Link: http://lkml.kernel.org/r/20180305200730.15812-20-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
Now that all sizes are properly typed, propagate "unsigned int" down the callgraph. Link: http://lkml.kernel.org/r/20180305200730.15812-19-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
Linux doesn't support negative length objects (including meta data). Link: http://lkml.kernel.org/r/20180305200730.15812-18-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
Linux doesn't support negative length objects. Link: http://lkml.kernel.org/r/20180305200730.15812-17-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
->offset is free pointer offset from the start of the object, can't be negative. Link: http://lkml.kernel.org/r/20180305200730.15812-16-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
/* * cpu_partial determined the maximum number of objects * kept in the per cpu partial lists of a processor. */ Can't be negative. Link: http://lkml.kernel.org/r/20180305200730.15812-15-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
->inuse is "the number of bytes in actual use by the object", can't be negative. Link: http://lkml.kernel.org/r/20180305200730.15812-14-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
Kmem cache alignment can't be negative. Link: http://lkml.kernel.org/r/20180305200730.15812-13-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
->reserved is either 0 or sizeof(struct rcu_head), can't be negative. Link: http://lkml.kernel.org/r/20180305200730.15812-12-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
Padding length can't be negative. Link: http://lkml.kernel.org/r/20180305200730.15812-11-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
->max_attr_size is maximum length of every SLAB memcg attribute ever written. VFS limits those to INT_MAX. Link: http://lkml.kernel.org/r/20180305200730.15812-10-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
->remote_node_defrag_ratio is in range 0..1000. This also adds a check and modifies the behavior to return an error code. Before this patch invalid values were ignored. Link: http://lkml.kernel.org/r/20180305200730.15812-9-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
size_index_elem() always works with small sizes (kmalloc caches are 32-bit) and returns small indexes. Link: http://lkml.kernel.org/r/20180305200730.15812-8-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
All those small numbers are reverse indexes into kmalloc caches array and can't be negative. On x86_64 "unsigned int = fls()" can drop CDQE instruction: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-2 (-2) Function old new delta kmalloc_slab 101 99 -2 Link: http://lkml.kernel.org/r/20180305200730.15812-7-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
struct kmem_cache::size and ::align were always 32-bit. Out of curiosity I created 4GB kmem_cache, it oopsed with division by 0. kmem_cache_create(1UL<<32+1) created 1-byte cache as expected. size_t doesn't work and never did. Link: http://lkml.kernel.org/r/20180305200730.15812-6-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
struct kmem_cache::size has always been "int", all those "size_t size" are fake. Link: http://lkml.kernel.org/r/20180305200730.15812-5-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
KMALLOC_MAX_CACHE_SIZE is 32-bit so is the largest kmalloc cache size. Christoph said: : : Ok SLABs maximum allocation size is limited to 32M (see : include/linux/slab.h: : : #define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \ : (MAX_ORDER + PAGE_SHIFT - 1) : 25) : : And SLUB/SLOB pass all larger requests to the page allocator anyways. Link: http://lkml.kernel.org/r/20180305200730.15812-4-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
kmalloc_size() derives size of kmalloc cache from internal index, which can't be negative. Propagate unsignedness a bit. Link: http://lkml.kernel.org/r/20180305200730.15812-3-adobriyan@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
kmalloc_index() return index into an array of kmalloc kmem caches, therefore should be unsigned. Space savings with SLUB on trimmed down .config: add/remove: 0/1 grow/shrink: 6/56 up/down: 85/-557 (-472) Function old new delta calculate_sizes 924 983 +59 on_freelist 589 604 +15 init_cache_random_seq 122 127 +5 ext4_mb_init 1206 1210 +4 slab_pad_check.part 270 271 +1 cpu_partial_store 112 113 +1 usersize_show 28 27 -1 ... new_slab 1871 1837 -34 slab_order 204 - -204 This patch start a series of converting SLUB (mostly) to "unsigned int". 1) Most integers in the code are in fact unsigned entities: array indexes, lengths, buffer sizes, allocation orders. It is therefore better to use unsigned variables 2) Some integers in the code are either "size_t" or "unsigned long" for no reason. size_t usually comes from people trying to maintain type correctness and figuring out that "sizeof" operator returns size_t or memset/memcpy takes size_t so should everything passed to it. However the number of 4GB+ objects in the kernel is very small. Most, if not all, dynamically allocated objects with kmalloc() or kmem_cache_create() aren't actually big. Maintaining wide types doesn't do anything. 64-bit ops are bigger than 32-bit on our beloved x86_64, so try to not use 64-bit where it isn't necessary (read: everywhere where integers are integers not pointers) 3) in case of SLAB allocators, there are additional limitations *) page->inuse, page->objects are only 16-/15-bit, *) cache size was always 32-bit *) slab orders are small, order 20 is needed to go 64-bit on x86_64 (PAGE_SIZE << order) Basically everything is 32-bit except kmalloc(1ULL<<32) which gets shortcut through page allocator. Christoph said: : : That changes with large base page size on power and ARM64 f.e. but then : we do not want to encourage larger allocations through slab anyways. Link: http://lkml.kernel.org/r/20180305200730.15812-2-adobriyan@gmail.comSigned-off-by: -
Alexey Dobriyan authored
Link: http://lkml.kernel.org/r/20180305200730.15812-1-adobriyan@gmail.comSigned-off-by:
-
Chintan Pandya authored
When SLUB_DEBUG catches some issues, it prints all the required debug info. However, in a few cases where allocation and free of the object has happened in a very short time, 'age' might be misleading. See the example below: ============================================================================= BUG kmalloc-256 (Tainted: G W O ): Poison overwritten ----------------------------------------------------------------------------- ... INFO: Allocated in binder_transaction+0x4b0/0x2448 age=731 cpu=3 pid=5314 ... INFO: Freed in binder_free_transaction+0x2c/0x58 age=735 cpu=6 pid=2079 ... Object fffffff14956a870: 6b 6b 6b 6b 6b 6b 6b 6b 67 6b 6b 6b 6b 6b 6b a5 kkkkkkkkgkkkk In this case, object got freed later but 'age' shows otherwise. This could be because, while printing this info, we print allocation traces first and free traces thereafter. In between, if we get schedule out or jiffies increment, (jiffies - t->when) could become meaningless. Use the jitter free reference to calculate age. New output will exactly be same. 'age' is still staying with single jiffies ref in both prints. Change-Id: I0846565807a4229748649bbecb1ffb743d71fcd8 Link: http://lkml.kernel.org/r/1520492010-19389-1-git-send-email-cpandya@codeaurora.orgSigned-off-by:
Chintan Pandya <cpandya@codeaurora.org> Acked-by:
-
Alexey Dobriyan authored
kmalloc caches aren't relocated after being set up neither does "size_index" array. Link: http://lkml.kernel.org/r/20180226203519.GA6886@avx2Signed-off-by:
-
shunki-fujita authored
When changing the size of a block device, its all caches are freed. It's necessary on shrinking to prevent spurious I/Os to the disappeared region. However, on expanding, such kind of I/Os doesn't happen. Similar things can be considered for btrfs filesystem resize and resize2fs, but they are designed not to drop caches when expanding. Therefore this patch removes unnecessary cache drop. Link: http://lkml.kernel.org/r/1521457240-153390-1-git-send-email-shunki-fujita@cybozu.co.jpSigned-off-by:
Shunki Fujita <shunki-fujita@cybozu.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Chengguang Xu authored
When specifying trans_mod multiple times in a mount, it will cause an inaccurate refcount of the trans module. Also, in the error case of option parsing, we should put the trans module if we have already got it. Link: http://lkml.kernel.org/r/1522154942-57339-1-git-send-email-cgxu519@gmx.comSigned-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
-
