Build error, implicit declaration of function __inet6_ehashfn shows up
When RDS is enabled but not IPV6.
net/rds/connection.c: In function ‘rds_conn_bucket’:
net/rds/connection.c:67:9: error: implicit declaration of function ‘__inet6_ehashfn’; did you mean ‘__inet_ehashfn’? [-Werror=implicit-function-declaration]
  hash = __inet6_ehashfn(lhash, 0, fhash, 0, rds_hash_secret);
         ^~~~~~~~~~~~~~~
         __inet_ehashfn

Current code adds IPV6 as a depends on in config RDS.

Fixes: eee2fa6a ("rds: Changing IP address internal representation to struct in6_addr")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: patches 2018-07-25

here are 4 more patches for SMC: The first one is just a small
code cleanup in preparation for patch 2. Patch 2 switches to the
use of the vlan-gid for VLAN traffic. Patch 3 improves diagnosis
when creating SMC connections. Patch 4 improves synchronization
between local and remote link groups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Send an orderly DELETE LINK request before termination of a link group,
add support for client triggered DELETE LINK processing. And send a
disorderly DELETE LINK before module is unloaded.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remember the fallback reason code and the peer diagnosis code for
smc sockets, and provide them in smc_diag.c to the netlink interface.
And add more detailed reason codes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SMC code uses the base gid for VLAN traffic. The gids exchanged in
the CLC handshake and the gid index used for the QP have to switch
from the base gid to the appropriate vlan gid.

When searching for a matching IB device port for a certain vlan
device, it does not make sense to return an IB device port, which
is not enabled for the used vlan_id. Add another check whether a
vlan gid exists for a certain IB device port.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Link confirmation will always be sent across the new link being
confirmed. This allows to shrink the parameter list.
No functional change.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: protect from theoretical size overflows and SR-IOV errors

This small set changes the handling of pci_sriov_set_totalvfs() errors.
nfp is the only driver which fails probe on pci_sriov_set_totalvfs()
errors.  It turns out some BIOS configurations may break SR-IOV and
users who don't use that feature should not suffer.

Remaining patches makes sure we use overflow-safe function for ring
allocation, even though ring sizes are limited.  It won't hurt and
we can also enable fallback to vmalloc() if memory is tight while
at it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use array_size() and store the size as full size_t to protect from
theoretical size overflow when handling HW descriptor rings.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7f1c684a ("nfp: setup xdp_rxq_info") mixed the cache
cold and cache hot data in the nfp_net_rx_ring structure (ignoring
the feedback), to try to fit the structure into 2 cache lines
after struct xdp_rxq_info was added.  Now that we are about to add
a new field the structure will grow back to 3 cache lines, so
order the members correctly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use kvcalloc() instead of tmp variable + kzalloc() when allocating
SW buffer information to allow falling back to vmalloc and to protect
from theoretical integer overflow.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On machines with buggy ACPI tables or when SR-IOV is already enabled
we may not be able to set the SR-IOV VF limit in sysfs, it's not fatal
because the limit is imposed by the driver anyway.  Only the sysfs
'sriov_totalvfs' attribute will be too high.  Print an error to inform
user about the failure but allow probe to continue.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dma_mapping_error() returns true or false, but we want
to return -ENOMEM if there was an error.

Fixes: 174fd259 ("amd-xgbe: Implement split header receive support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Introduce algorithmic TCAM support

The Spectrum-2 ASIC uses an algorithmic TCAM (A-TCAM) where multiple
exact matches lookups are performed instead of a single lookup as with
standard circuit TCAM (C-TCAM) memory. This allows for higher scale and
reduced power consumption.

The lookups are performed by masking a packet using different masks
(e.g., {dst_ip/24, ethtype}) defined for the region and looking for an
exact match. Eventually, the rule with the highest priority will be
picked.

Since the number of masks per-region is limited, the ASIC includes a
C-TCAM that can be used as a spill area for rules that do not fit into
the A-TCAM.

The driver currently uses a C-TCAM only mode which is similar to
Spectrum-1. However, this mode severely limits both the number of
supported ACL rules and the performance of the ACL lookup.

This patch set introduces initial support for the A-TCAM mode where the
C-TCAM is only used for rule spillage.

The first five patches add the registers and ASIC resources needed in
order to make use of the A-TCAM.

Next three patches are the "meat" and add the eRP core which is used to
manage the masks used by each ACL region. The individual commit messages
are lengthy and aim to thoroughly explain the subject.

The next seven patches perform small adjustments in the code and the
related data structures and are meant to prepare the code base to the
introduction of the A-TCAM in the last two patches.

Various A-TCAM optimization will be the focus of follow-up patch sets:

* Pruning - Used to reduce the number of lookups. Each rule will include
  a prune vector that indicates which masks should not be considered for
  further lookups as they cannot result in a higher priority match

* Bloom filter - Used to reduce the number of lookups. Before performing
  a lookup with a given mask the ASIC will consult a bloom filter
  (managed by the driver) that indicates whether a match might exist using
  the considered mask

* Masks aggregation - Used to increase scale and reduce lookups. Masks
  that only differ by up to eight consecutive bits (delta bits) can be
  aggregated into a single mask. The delta bits then become a part of the
  rule's key. For example, dst_ip/16 and dst_ip/17 can be represented as
  dst_ip/16 with a delta bit of one. Rules using the aggregated mask then
  specify whether the 17-th bit should be masked or not and its value
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that all the pieces are in place we can start using the A-TCAM
instead of only using the C-TCAM. This allows for much higher scale and
better performance (to be improved further by follow-up patch sets).

Perform the integration with the A-TCAM and the eRP core by reverting
the changes introduced by "mlxsw: spectrum_acl: Enable C-TCAM only mode
in eRP core" and add calls from the C-TCAM code into the eRP core.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement rule insertion and deletion into the A-TCAM before we flip the
driver to start using the A-TCAM.

Rule insertion into the A-TCAM is very similar to C-TCAM, but there are
subtle differences between regions of different sizes (i.e., different
number of key blocks).

Specifically, as explained in "mlxsw: spectrum_acl: Allow encoding a
partial key", in 12 key blocks regions a rule is split into two and the
two halves of the rule are linked using a "large entry key ID".

Such differences are abstracted away by using different region
operations per region type.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When A-TCAM will be used together with C-TCAM, the C-TCAM code will need
to call into the eRP core in order to get an eRP for an inserted entry.

The eRP core takes an A-TCAM region as one of its arguments, so pass the
C-TCAM region to the insertion function which will later allow us to
derive the A-TCAM region, given it contains the C-TCAM one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before we start using the A-TCAM we need to make sure the region is
properly initialized.

This includes the setting of its type (which affects the size of its eRP
table, for example) and its registration with the eRP core.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each TCAM region currently uses its own resources and there is no
sharing between the different regions.

This is going to change with A-TCAM as each region will need to allocate
an eRP table from the global eRP tables array.

Make the global TCAM resources available to each region by passing the
TCAM private data to the region initialization routine.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In Spectrum-2 the C-TCAM is only used for rules that can't fit in the
A-TCAM due to a limited number of masks per A-TCAM region.

In addition, rules inserted into the C-TCAM may affect rules residing in
the A-TCAM, by clearing their C-TCAM prune bit.

The two regions are thus closely related and can be thought of as if the
C-TCAM region is encapsulated in the A-TCAM one.

Change the data structures to reflect that before introducing A-TCAM
support and make C-TCAM region initialization part of the A-TCAM region
initialization sequence.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialize the A-TCAM as part of the driver's initialization routine.

Specifically, initialize the eRP tables so that A-TCAM regions will be
able to perform allocations of eRP tables upon rule insertion in
subsequent patches.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When working with 12 key blocks in the A-TCAM, rules are split into two
records, which constitute two lookups. The two records are linked using
a "large entry key ID". The ID is assigned to key blocks 6 to 11 and
resolved during the first lookup. The second lookup is performed using
the ID and the remaining key blocks.

Allow encoding a partial key so that it can be later used to check if an
ID can be reused.

This is done by adding two arguments to the existing encode function
that specify the range of the block indexes we would like to encode. The
key and mask arguments become optional, as we will not need to encode
both of them all the time.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a similar fashion to Spectrum-1's region struct, Spectrum-2's struct
needs to store a pointer to the common region struct.

The pointer will be used in follow-up patches that implement rules
insertion and deletion.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of eRPs that can be used by a single A-TCAM region is limited
to 16. When more eRPs are needed, an ordinary circuit TCAM (C-TCAM) can
be used to hold the extra eRPs.

Unlike the A-TCAM, only a single (last) lookup is performed in the
C-TCAM and not a lookup per-eRP. However, modeling the C-TCAM as extra
eRPs will allow us to easily introduce support for pruning in a
follow-up patch set and is also logically correct.

The following diagram depicts the relation between both TCAMs:
                                                                 C-TCAM
+-------------------+               +--------------------+    +-----------+
|                   |               |                    |    |           |
|  eRP #1 (A-TCAM)  +----> ... +----+  eRP #16 (A-TCAM)  +----+  eRP #17  |
|                   |               |                    |    |    ...    |
+-------------------+               +--------------------+    |  eRP #N   |
                                                              |           |
                                                              +-----------+
Lookup order is from left to right.

Extend the eRP core APIs with a C-TCAM parameter which indicates whether
the requested eRP is to be used with the C-TCAM or not.

Since the C-TCAM is only meant to absorb rules that can't fit in the
A-TCAM due to exceeded number of eRPs or key collision, an error is
returned when a C-TCAM eRP needs to be created when the eRP state
machine is in its initial state (i.e., 'no masks'). This should only
happen in the face of very unlikely errors when trying to push rules
into the A-TCAM.

In order not to perform unnecessary lookups, the eRP core will only
enable a C-TCAM lookup for a given region if it knows there are C-TCAM
eRPs present.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, no calls are performed into the eRP core, but in order to
make review easier we would like to gradually add these calls.

Have the eRP core initialize a region's master mask to all ones and
allow it to use an empty eRP table. This directs the lookup to the
C-TCAM and allows the C-TCAM only mode to continue working.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When rules are inserted into the A-TCAM they are associated with a mask,
which is part of the lookup key: { masked key, mask ID, region ID }.

These masks are called rule patterns (RP) and the aggregation of several
masks into one (to be introduced in follow-up patch sets) is called an
extended RP (eRP).

When a packet undergoes a lookup in an ACL region it is masked by the
current set of eRPs used by the region, looking for an exact match.
Eventually, the rule with the highest priority is picked.

These eRPs are stored in several global banks to allow for lookup to
occur using several eRPs simultaneously.

At first, an ACL region will only require a single mask - upon the
insertion of the first rule. In this case, the region can use the
"master RP" which is composed by OR-ing all the masks used by the
region. This mask is a property of the region and thus there is no need
to use the above mentioned banks.

At some point, a second mask will be needed. In this case, the region
will need to allocate an eRP table from the above mentioned banks and
insert its masks there.

>From now on, upon lookup, the eRP table used by the region will be
fetched from the eRP banks - using {eRP bank, Index within the bank} -
and the eRPs present in the table will be used to mask the packet. Note
that masks with consecutive indexes are inserted into consecutive banks.

When rules are deleted and a region only needs a single mask once again
it can free its eRP table and use the master RP.

The above logic is implemented in the eRP core and represented using the
following state machine:

    +------------+   create mask - as master RP   +---------------+
    |            +-------------------------------->               |
    |  no masks  |                                |  single mask  |
    |            <--------------------------------+               |
    +------------+          delete mask           +-----+--^------+
                                                        |  |
                                                        |  |
                                  create mask -         |  |  delete mask -
    create mask                   transition to use eRP |  |  transition to
     +--------+                   table                 |  |  use master RP
     |        |                                         |  |
     |        |                                         |  |
+----v--------+----+         create mask           +----v--+-----+
|                  <-------------------------------+             |
|  multiple masks  |                               |  two masks  |
|                  +------------------------------->             |
+------------------+      delete mask - if two     +-------------+
                          remaining

The code that actually configures rules in the A-TCAM will interface
with the eRP core by getting or putting an eRP based on the required
mask used by the rule.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the following resources to be used by A-TCAM code:
* Maximum number of eRP banks
* Maximum size of eRP bank
* Number of eRP entries required for a 2/4/8/12 key blocks mask
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a resource to make sure we do not exceed the maximum number of
supported large key IDs in a region.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The register is used to add and delete eRPs from the eRP table.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The register is used to configure rules in the A-TCAM.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before introducing A-TCAM support we need to make sure all the necessary
fields are configurable and not hard coded to values that worked for the
C-TCAM only use case.

This includes - for example - the ability to configure the eRP table
used by the TCAM region.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/ethernet/microchip/lan743x_main.c:2944:25: warning:
 symbol 'lan743x_pm_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

net/ipv4/tcp_timer.c:25:5: warning:
 symbol 'tcp_retransmit_stamp' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes the following sparse warning:

net/sched/cls_flower.c:1356:36: warning: incorrect type in argument 3 (different base types)
net/sched/cls_flower.c:1356:36: expected unsigned short [unsigned] [usertype] value
net/sched/cls_flower.c:1356:36: got restricted __be16 [usertype] vlan_tpid
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow obtaining MTTs starting at any index,
thus give a better cache utilization.

For this, allow setting log_mtts_per_seg to 0, and use
this in default.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Anaty Rahamim Bar Kat <anaty@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
net/mlx5: Offload setting/matching on tunnel tos/ttl

This series enables mlx5 offloading of tc eswitch rules that set
tos/ttl (encap) or match on them (decap) for tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable offloading of TC matching on tos/ttl for ipv4/6 tunnels.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the values provided by user-space for the encapsulation headers.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currnetly, the ttl for the encapsulation headers is taken from the
route lookup result. As a pre-step to allow for an offload case when
the user specifies the ttl, take it from the route lookup only if
not zero. While here, also move to use u8 instead int for the ttl.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The vxge driver doesn't need anything provided by pci_hotplug.h, so remove
the unnecessary include of it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper for checking whether polling is used to detect PHY status
changes.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>