For mSBC encoded audio stream over usb transport, btusb driver
to be set to alternate settings 6 as per BT core spec 5.0. The
type of air mode is used to differenting which alt setting to be
used.

The changes are made considering some discussion over the similar
patch submitted earlier from Kuba Pawlak (link below)
https://www.spinics.net/lists/linux-bluetooth/msg64577.htmlReported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

notifying using HCI_NOTIFY_CONN_ADD for SCO connection is generic in
case of mSBC audio. To differntiate SCO air mode introducing
HCI_NOTIFY_ENABLE_SCO_CVSD and HCI_NOTIFY_ENABLE_SCO_TRANSP.
Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

This changes a simple typo in hci_event.c
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When scheduling TX packets, send all SCO/eSCO packets first, check for
pending SCO/eSCO packets after every ACL/LE packet and send them if any
are pending.  This is done to make sure that we can meet SCO deadlines
on slow interfaces like UART.

If we were to queue up multiple ACL packets without checking for a SCO
packet, we might miss the SCO timing. For example:

The time it takes to send a maximum size ACL packet (1024 bytes):
t = 10/8 * 1024 bytes * 8 bits/byte * 1 packet / baudrate
        where 10/8 is uart overhead due to start/stop bits per byte

Replace t = 3.75ms (SCO deadline), which gives us a baudrate of 2730666.

At a baudrate of 3000000, if we didn't check for SCO packets within 1024
bytes, we would miss the 3.75ms timing window.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When BT module can't be initialized, but it has an IRQ, unloading
the driver WARNs when trying to free not-yet-requested IRQ. Fix it by
noting whether the IRQ was requested.

WARNING: CPU: 2 PID: 214 at kernel/irq/devres.c:144 devm_free_irq+0x49/0x4ca
[...]
WARNING: CPU: 2 PID: 214 at kernel/irq/manage.c:1746 __free_irq+0x8b/0x27c
Trying to free already-free IRQ 264
Modules linked in: hci_uart(-) btbcm bluetooth ecdh_generic ecc libaes
CPU: 2 PID: 214 Comm: rmmod Tainted: G        W         5.6.1mq-00044-ga5f9ea098318-dirty #928
[...]
[<b016aefb>] (devm_free_irq) from [<af8ba1ff>] (bcm_close+0x97/0x118 [hci_uart])
[<af8ba1ff>] (bcm_close [hci_uart]) from [<af8b736f>] (hci_uart_unregister_device+0x33/0x3c [hci_uart])
[<af8b736f>] (hci_uart_unregister_device [hci_uart]) from [<b035930b>] (serdev_drv_remove+0x13/0x20)
[<b035930b>] (serdev_drv_remove) from [<b037093b>] (device_release_driver_internal+0x97/0x118)
[<b037093b>] (device_release_driver_internal) from [<b0370a0b>] (driver_detach+0x2f/0x58)
[<b0370a0b>] (driver_detach) from [<b036f855>] (bus_remove_driver+0x41/0x94)
[<b036f855>] (bus_remove_driver) from [<af8ba8db>] (bcm_deinit+0x1b/0x740 [hci_uart])
[<af8ba8db>] (bcm_deinit [hci_uart]) from [<af8ba86f>] (hci_uart_exit+0x13/0x30 [hci_uart])
[<af8ba86f>] (hci_uart_exit [hci_uart]) from [<b01900bd>] (sys_delete_module+0x109/0x1d0)
[<b01900bd>] (sys_delete_module) from [<b0101001>] (ret_fast_syscall+0x1/0x5a)
[...]

Cc: stable@vger.kernel.org
Fixes: 6cc4396c ("Bluetooth: hci_bcm: Add wake-up capability")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The IRQ polarity is be configured in bcm_setup_sleep(). Make the
configured value match what is in the DeviceTree.

Cc: stable@vger.kernel.org
Fixes: f25a96c8 ("Bluetooth: hci_bcm: enable IRQ capability from devicetree")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

To improve security, always give the user-space daemon a chance to
accept or reject a Just Works pairing (LE). The daemon may decide to
auto-accept based on the user's intent.
Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This adds BT_MODE socket option which can be used to set L2CAP modes,
including modes only supported over LE which were not supported using
the L2CAP_OPTIONS.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

L2CAP_OPTIONS shall only be used with BR/EDR modes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch adds compatible string for the QCA chip QCA6390.
Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch adds support for QCA6390, including the devicetree and acpi
compatible hwid matching, and patch/nvm downloading.
Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Every remaining user just has the error case returning -EFAULT.

In fact, the exception was __get_user_asm_nozero(), which was removed in
commit 4b842e4e ("x86: get rid of small constant size cases in
raw_copy_{to,from}_user()"), and the other __get_user_xyz() macros just
followed suit for consistency.

Fix up some macro whitespace while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The last user was removed by commit 4b842e4e ("x86: get rid of small
constant size cases in raw_copy_{to,from}_user()").  Get rid of the
left-overs before somebody tries to use it again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:
 "Highlights:

   1) Fix the iwlwifi regression, from Johannes Berg.

   2) Support BSS coloring and 802.11 encapsulation offloading in
      hardware, from John Crispin.

   3) Fix some potential Spectre issues in qtnfmac, from Sergey
      Matyukevich.

   4) Add TTL decrement action to openvswitch, from Matteo Croce.

   5) Allow paralleization through flow_action setup by not taking the
      RTNL mutex, from Vlad Buslov.

   6) A lot of zero-length array to flexible-array conversions, from
      Gustavo A. R. Silva.

   7) Align XDP statistics names across several drivers for consistency,
      from Lorenzo Bianconi.

   8) Add various pieces of infrastructure for offloading conntrack, and
      make use of it in mlx5 driver, from Paul Blakey.

   9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

  10) Lots of parallelization improvements during configuration changes
      in mlxsw driver, from Ido Schimmel.

  11) Add support to devlink for generic packet traps, which report
      packets dropped during ACL processing. And use them in mlxsw
      driver. From Jiri Pirko.

  12) Support bcmgenet on ACPI, from Jeremy Linton.

  13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
      Starovoitov, and your's truly.

  14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

  15) Fix sysfs permissions when network devices change namespaces, from
      Christian Brauner.

  16) Add a flags element to ethtool_ops so that drivers can more simply
      indicate which coalescing parameters they actually support, and
      therefore the generic layer can validate the user's ethtool
      request. Use this in all drivers, from Jakub Kicinski.

  17) Offload FIFO qdisc in mlxsw, from Petr Machata.

  18) Support UDP sockets in sockmap, from Lorenz Bauer.

  19) Fix stretch ACK bugs in several TCP congestion control modules,
      from Pengcheng Yang.

  20) Support virtual functiosn in octeontx2 driver, from Tomasz
      Duszynski.

  21) Add region operations for devlink and use it in ice driver to dump
      NVM contents, from Jacob Keller.

  22) Add support for hw offload of MACSEC, from Antoine Tenart.

  23) Add support for BPF programs that can be attached to LSM hooks,
      from KP Singh.

  24) Support for multiple paths, path managers, and counters in MPTCP.
      From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
      and others.

  25) More progress on adding the netlink interface to ethtool, from
      Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
  net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
  cxgb4/chcr: nic-tls stats in ethtool
  net: dsa: fix oops while probing Marvell DSA switches
  net/bpfilter: remove superfluous testing message
  net: macb: Fix handling of fixed-link node
  net: dsa: ksz: Select KSZ protocol tag
  netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
  net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
  net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
  net: stmmac: create dwmac-intel.c to contain all Intel platform
  net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
  net: dsa: bcm_sf2: Add support for matching VLAN TCI
  net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
  net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
  net: dsa: bcm_sf2: Disable learning for ASP port
  net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
  net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
  net: dsa: b53: Restore VLAN entries upon (re)configuration
  net: dsa: bcm_sf2: Fix overflow checks
  hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
  ...

Pull NTB updates from Jon Mason:
 "Bug fixes for a few printing issues, link status detection bug on AMD
  hardware, and a DMA address issue with ntb_perf.

  Also, large series of AMD NTB patches"

* tag 'ntb-5.7' of git://github.com/jonmason/ntb: (21 commits)
  NTB: add pci shutdown handler for AMD NTB
  NTB: send DB event when driver is loaded or un-loaded
  NTB: remove redundant setting of DB valid mask
  NTB: return link up status correctly for PRI and SEC
  NTB: add helper functions to set and clear sideinfo
  NTB: move ntb_ctrl handling to init and deinit
  NTB: handle link up, D0 and D3 events correctly
  NTB: handle link down event correctly
  NTB: remove handling of peer_sta from amd_link_is_up
  NTB: set peer_sta within event handler itself
  NTB: return the side info status from amd_poll_link
  NTB: define a new function to get link status
  NTB: Enable link up and down event notification
  NTB: clear interrupt status register
  NTB: Fix access to link status and control register
  MAINTAINERS: update maintainer list for AMD NTB driver
  NTB: ntb_transport: Use scnprintf() for avoiding potential buffer overflow
  ntb_hw_switchtec: Fix ntb_mw_clear_trans error if size == 0
  ntb_tool: Fix printk format
  NTB: ntb_perf: Fix address err in perf_copy_chunk
  ...

Pull x86 platform driver updates from Andy Shevchenko:

 - Fix for improper handling of fan_boost_mode in sysfs for ASUS
   laptops.

 - On newer ASUS laptops the 1st battery is named differently, here is a
   fix.

 - Fix Lex 2I385SW to allow both network cards to be used.

 - The power integrated circuit driver for Surface 3 has been added.

 - Refactor and clean up of Intel PMC driver and enable it on Intel
   Jasper Lake.

 - Clean up of Dell RBU driver.

 - Big update for Intel Speed Select technology support tool and driver.

* tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits)
  platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler()
  platform/x86: surface3_power: Fix Kconfig section ordering
  platform/x86: surface3_power: Add missed headers
  platform/x86: surface3_power: Reformat GUID assignment
  platform/x86: surface3_power: Drop useless macro ACPI_PTR()
  platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3
  platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner
  platform/x86: surface3_power: Use dev_err() instead of pr_err()
  platform/x86: surface3_power: Drop unused structure definition
  platform/x86: surface3_power: MSHW0011 rev-eng implementation
  platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic
  platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states
  tools/power/x86/intel-speed-select: Fix a typo in error message
  tools/power/x86/intel-speed-select: Update version
  tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json
  tools/power/x86/intel-speed-select: Add display for enabled cpus count
  tools/power/x86/intel-speed-select: Print friendly warning for bad command line
  tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature
  tools/power/x86/intel-speed-select: Improve CLX commands
  tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big set of TTY / Serial patches for 5.7-rc1

  Lots of console fixups and reworking in here, serial core tweaks
  (doesn't that ever get old, why are we still creating new serial
  devices?), serial driver updates, line-protocol driver updates, and
  some vt cleanups and fixes included in here as well.

  All have been in linux-next with no reported issues"

* tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits)
  serial: 8250: Optimize irq enable after console write
  serial: 8250: Fix rs485 delay after console write
  vt: vt_ioctl: fix use-after-free in vt_in_use()
  vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
  tty: serial: make SERIAL_SPRD depend on COMMON_CLK
  tty: serial: fsl_lpuart: fix return value checking
  tty: serial: fsl_lpuart: move dma_request_chan()
  ARM: dts: tango4: Make /serial compatible with ns16550a
  ARM: dts: mmp*: Make the serial ports compatible with xscale-uart
  ARM: dts: mmp*: Fix serial port names
  ARM: dts: mmp2-brownstone: Don't redeclare phandle references
  ARM: dts: pxa*: Make the serial ports compatible with xscale-uart
  ARM: dts: pxa*: Fix serial port names
  ARM: dts: pxa*: Don't redeclare phandle references
  serial: omap: drop unused dt-bindings header
  serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs
  serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA
  serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info
  serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()
  serial: 8250: 8250_omap: Account for data in flight during DMA teardown
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

Pull Kbuild updates from Masahiro Yamada:
 "Build system:

   - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
     fixed set of export symbols for Generic Kernel Image (GKI)

   - allow to run 'make dt_binding_check' without .config

   - use full schema for checking DT examples in *.yaml files

   - make modpost fail for missing MODULE_IMPORT_NS(), which makes more
     sense because we know the produced modules are never loadable

   - Remove unused 'AS' variable

  Kconfig:

   - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
     files

   - relax the 'imply' behavior so that symbols implied by 'y' can
     become 'm'

   - make 'imply' obey 'depends on' in order to make 'imply' really weak

  Misc:

   - add documentation on building the kernel with Clang/LLVM

   - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()

   - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n

   - various script and Makefile cleanups"

* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  Makefile: Update kselftest help information
  kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
  kbuild: add outputmakefile to no-dot-config-targets
  kbuild: remove AS variable
  net: wan: wanxl: refactor the firmware rebuild rule
  net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
  net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
  kbuild: add comment about grouped target
  kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
  kconfig: remove unused variable in qconf.cc
  sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
  kbuild: refactor Makefile.dtbinst more
  kbuild: compute the dtbs_install destination more simply
  Makefile: disallow data races on gcc-10 as well
  kconfig: make 'imply' obey the direct dependency
  kconfig: allow symbols implied by y to become m
  net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
  modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
  modpost: rework and consolidate logging interface
  kbuild: allow to run dt_binding_check without kernel configuration
  ...

Merge branch 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security subsystem updates from James Morris:
 "Two minor updates for the core security subsystem:

   - kernel-doc warning fixes from Randy Dunlap

   - header cleanup from YueHaibing"

* 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: remove duplicated include from security.h
  security: <linux/lsm_hooks.h>: fix all kernel-doc warnings

Pull SELinux updates from Paul Moore:
 "We've got twenty SELinux patches for the v5.7 merge window, the
  highlights are below:

   - Deprecate setting /sys/fs/selinux/checkreqprot to 1.

     This flag was originally created to deal with legacy userspace and
     the READ_IMPLIES_EXEC personality flag. We changed the default from
     1 to 0 back in Linux v4.4 and now we are taking the next step of
     deprecating it, at some point in the future we will take the final
     step of rejecting 1.

   - Allow kernfs symlinks to inherit the SELinux label of the parent
     directory. In order to preserve backwards compatibility this is
     protected by the genfs_seclabel_symlinks SELinux policy capability.

   - Optimize how we store filename transitions in the kernel, resulting
     in some significant improvements to policy load times.

   - Do a better job calculating our internal hash table sizes which
     resulted in additional policy load improvements and likely general
     SELinux performance improvements as well.

   - Remove the unused initial SIDs (labels) and improve how we handle
     initial SIDs.

   - Enable per-file labeling for the bpf filesystem.

   - Ensure that we properly label NFS v4.2 filesystems to avoid a
     temporary unlabeled condition.

   - Add some missing XFS quota command types to the SELinux quota
     access controls.

   - Fix a problem where we were not updating the seq_file position
     index correctly in selinuxfs.

   - We consolidate some duplicated code into helper functions.

   - A number of list to array conversions.

   - Update Stephen Smalley's email address in MAINTAINERS"

* tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: clean up indentation issue with assignment statement
  NFS: Ensure security label is set for root inode
  MAINTAINERS: Update my email address
  selinux: avtab_init() and cond_policydb_init() return void
  selinux: clean up error path in policydb_init()
  selinux: remove unused initial SIDs and improve handling
  selinux: reduce the use of hard-coded hash sizes
  selinux: Add xfs quota command types
  selinux: optimize storage of filename transitions
  selinux: factor out loop body from filename_trans_read()
  security: selinux: allow per-file labeling for bpffs
  selinux: generalize evaluate_cond_node()
  selinux: convert cond_expr to array
  selinux: convert cond_av_list to array
  selinux: convert cond_list to array
  selinux: sel_avc_get_stat_idx should increase position index
  selinux: allow kernfs symlinks to inherit parent directory context
  selinux: simplify evaluate_cond_node()
  Documentation,selinux: deprecate setting checkreqprot to 1
  selinux: move status variables out of selinux_ss

Pull audit updates from Paul Moore:
 "We've got two audit patches for the v5.7 merge window with a stellar
  14 lines changed between the two patches. The patch descriptions are
  far more lengthy than the patches themselves, which is a very good
  thing for patches this size IMHO. The patches pass our test suites and
  a quick summary is below:

   - Stop logging inode information when updating an audit file watch.

     Since we are not changing the inode, or the fact that we are
     watching the associated file, the inode information is just noise
     that we can do without.

   - Fix a problem where mandatory audit records were missing their
     accompanying audit records (e.g. SYSCALL records were missing).

     The missing records often meant that we didn't have the necessary
     context to understand what was going on when the event occurred"

* tag 'audit-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: trigger accompanying records when no rules present
  audit: CONFIG_CHANGE don't log internal bookkeeping as an event

Pull cifs updates from Steve French:
 "First part of cifs/smb3 changes for merge window (others are still
  being tested). Various RDMA (smbdirect) fixes, addition of SMB3.1.1
  POSIX support in readdir, 3 fixes for stable, and a fix for flock.

  Summary:

  New feature:
   - SMB3.1.1 POSIX support in readdir

  Fixes:
   - various RDMA (smbdirect) fixes
   - fix for flock
   - fallocate fix
   - some improved mount warnings
   - two timestamp related fixes
   - reconnect fix
   - three fixes for stable"

* tag '5.7-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (28 commits)
  cifs: update internal module version number
  cifs: Allocate encryption header through kmalloc
  cifs: smbd: Check and extend sender credits in interrupt context
  cifs: smbd: Calculate the correct maximum packet size for segmented SMBDirect send/receive
  smb3: use SMB2_SIGNATURE_SIZE define
  CIFS: Fix bug which the return value by asynchronous read is error
  CIFS: check new file size when extending file by fallocate
  SMB3: Minor cleanup of protocol definitions
  SMB3: Additional compression structures
  SMB3: Add new compression flags
  cifs: smb2pdu.h: Replace zero-length array with flexible-array member
  cifs: clear PF_MEMALLOC before exiting demultiplex thread
  cifs: cifspdu.h: Replace zero-length array with flexible-array member
  CIFS: Warn less noisily on default mount
  fs/cifs: fix gcc warning in sid_to_id
  cifs: allow unlock flock and OFD lock across fork
  cifs: do d_move in rename
  cifs: add SMB2_open() arg to return POSIX data
  cifs: plumb smb2 POSIX dir enumeration
  cifs: add smb2 POSIX info level
  ...

Pull gfs2 updates from Bob Peterson:
 "We've got a lot of patches (39) for this merge window. Most of these
  patches are related to corruption that occurs when journals are
  replayed. For example:

   1. A node fails while writing to the file system.
   2. Other nodes use the metadata that was once used by the failed
      node.
   3. When the node returns to the cluster, its journal is replayed, but
      the older metadata blocks overwrite the changes from step 2.

  Summary:

   - Fixed the recovery sequence to prevent corruption during journal
     replay.

   - Many bug fixes found during recovery testing.

   - New improved file system withdraw sequence.

   - Fixed how resource group buffers are managed.

   - Fixed how metadata revokes are tracked and written.

   - Improve processing of IO errors hit by daemons like logd and
     quotad.

   - Improved error checking in metadata writes.

   - Fixed how qadata quota data structures are managed"

* tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (39 commits)
  gfs2: Fix oversight in gfs2_ail1_flush
  gfs2: change from write to read lock for sd_log_flush_lock in journal replay
  gfs2: instrumentation wrt ail1 stuck
  gfs2: don't lock sd_log_flush_lock in try_rgrp_unlink
  gfs2: Remove unnecessary gfs2_qa_{get,put} pairs
  gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put
  gfs2: Change inode qa_data to allow multiple users
  gfs2: eliminate gfs2_rsqa_alloc in favor of gfs2_qa_alloc
  gfs2: Switch to list_{first,last}_entry
  gfs2: Clean up inode initialization and teardown
  gfs2: Additional information when gfs2_ail1_flush withdraws
  gfs2: leaf_dealloc needs to allocate one more revoke
  gfs2: allow journal replay to hold sd_log_flush_lock
  gfs2: don't allow releasepage to free bd still used for revokes
  gfs2: flesh out delayed withdraw for gfs2_log_flush
  gfs2: Do proper error checking for go_sync family of glops functions
  gfs2: Don't demote a glock until its revokes are written
  gfs2: drain the ail2 list after io errors
  gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails
  gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty
  ...

Pull btrfs updates from David Sterba:
 "A number of core changes that make things work better in general, code
  is simpler and cleaner.

  Core changes:

   - per-inode file extent tree, for in memory tracking of contiguous
     extent ranges to make sure i_size adjustments are accurate

   - tree root structures are protected by reference counts, replacing
     SRCU that did not cover some cases

   - leak detector for tree root structures

   - per-transaction pinned extent tracking

   - buffer heads are replaced by bios for super block access

   - speedup of extent back reference resolution, on an example test
     scenario the runtime of send went down from a hour to minutes

   - factor out locking scheme used for subvolume writer and NOCOW
     exclusion, abstracted as DREW lock, double reader-writer exclusion
     (allow either readers or writers)

   - cleanup and abstract extent allocation policies, preparation for
     zoned device support

   - make reflink/clone_range work on inline extents

   - add more cancellation point for relocation, improves long response
     from 'balance cancel'

   - add page migration callback for data pages

   - switch to guid for uuids, with additional cleanups of the interface

   - make ranged full fsyncs more efficient

   - removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC

   - remove b-tree readahead from delayed refs paths, avoiding seek and
     read unnecessary blocks

  Features:

   - v2 of ioctl to delete subvolumes, allowing to delete by id and more
     future extensions

  Fixes:

   - fix qgroup rescan worker that could block umount

   - fix crash during unmount due to race with delayed inode workers

   - fix dellaloc flushing logic that could create unnecessary chunks
     under heavy load

   - fix missing file extent item for hole after ranged fsync

   - several fixes in relocation error handling

  Other:

   - more documentation of relocation, device replace, space
     reservations

   - many random cleanups"

* tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits)
  btrfs: fix missing semaphore unlock in btrfs_sync_file
  btrfs: use nofs allocations for running delayed items
  btrfs: sysfs: Use scnprintf() instead of snprintf()
  btrfs: do not resolve backrefs for roots that are being deleted
  btrfs: track reloc roots based on their commit root bytenr
  btrfs: restart relocate_tree_blocks properly
  btrfs: reloc: reorder reservation before root selection
  btrfs: do not readahead in build_backref_tree
  btrfs: do not use readahead for running delayed refs
  btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot
  btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid
  btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support
  btrfs: kill the subvol_srcu
  btrfs: make btrfs_cleanup_fs_roots use the radix tree lock
  btrfs: don't take an extra root ref at allocation time
  btrfs: hold a ref on the root on the dead roots list
  btrfs: make inodes hold a ref on their roots
  btrfs: move the root freeing stuff into btrfs_put_root
  btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root
  btrfs: make the extent buffer leak check per fs info
  ...

Pull fscrypt updates from Eric Biggers:
 "Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves a file's
  encryption nonce.

  This makes it easier to write automated tests which verify that
  fscrypt is doing the encryption correctly"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
  fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl

Pull x86 vmware updates from Ingo Molnar:
 "The main change in this tree is the addition of 'steal time clock
  support' for VMware guests"

* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vmware: Use bool type for vmw_sched_clock
  x86/vmware: Enable steal time accounting
  x86/vmware: Add steal time clock support for VMware guests
  x86/vmware: Remove vmware_sched_clock_setup()
  x86/vmware: Make vmware_select_hypercall() __init

Pull x86 mm updates from Ingo Molnar:
 "A handful of changes:

   - two memory encryption related fixes

   - don't display the kernel's virtual memory layout plaintext on
     32-bit kernels either

   - two simplifications"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove the now redundant N_MEMORY check
  dma-mapping: Fix dma_pgprot() for unencrypted coherent pages
  x86: Don't let pgprot_modify() change the page encryption bit
  x86/mm/kmmio: Use this_cpu_ptr() instead get_cpu_var() for kmmio_ctx
  x86/mm/init/32: Stop printing the virtual memory layout

Pull misc x86 updates from Ingo Molnar:

 - extend the decoder maps with CET instructions

 - fix !vDSO corner cases

* 'x86-misc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/tests: Add CET instructions to the new instructions test
  x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
  selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault
  selftests/x86/vdso: Fix no-vDSO segfaults

Pull x86 fpu updates from Ingo Molnar:
 "Misc changes:

   - add a pkey sanity check

   - three commits to improve and future-proof xstate/xfeature handling
     some more"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkeys: Add check for pkey "overflow"
  x86/fpu/xstate: Warn when checking alignment of disabled xfeatures
  x86/fpu/xstate: Fix XSAVES offsets in setup_xstate_comp()
  x86/fpu/xstate: Fix last_good_offset in setup_xstate_features()

Pull x86 cleanups from Ingo Molnar:
 "This topic tree contains more commits than usual:

   - most of it are uaccess cleanups/reorganization by Al

   - there's a bunch of prototype declaration (--Wmissing-prototypes)
     cleanups

   - misc other cleanups all around the map"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  x86/mm/set_memory: Fix -Wmissing-prototypes warnings
  x86/efi: Add a prototype for efi_arch_mem_reserve()
  x86/mm: Mark setup_emu2phys_nid() static
  x86/jump_label: Move 'inline' keyword placement
  x86/platform/uv: Add a missing prototype for uv_bau_message_interrupt()
  kill uaccess_try()
  x86: unsafe_put-style macro for sigmask
  x86: x32_setup_rt_frame(): consolidate uaccess areas
  x86: __setup_rt_frame(): consolidate uaccess areas
  x86: __setup_frame(): consolidate uaccess areas
  x86: setup_sigcontext(): list user_access_{begin,end}() into callers
  x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit)
  x86: ia32_setup_rt_frame(): consolidate uaccess areas
  x86: ia32_setup_frame(): consolidate uaccess areas
  x86: ia32_setup_sigcontext(): lift user_access_{begin,end}() into the callers
  x86/alternatives: Mark text_poke_loc_init() static
  x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()
  x86/mm: Drop pud_mknotpresent()
  x86: Replace setup_irq() by request_irq()
  x86/configs: Slightly reduce defconfigs
  ...

Pull x86 build updates from Ingo Molnar:
 "A handful of updates: two linker script cleanups and a stock
  defconfig+allmodconfig bootability fix"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Discard .note.gnu.property sections in vDSO
  x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS
  x86/Kconfig: Make CMDLINE_OVERRIDE depend on non-empty CMDLINE

Pull x86 boot updates from Ingo Molnar:
 "Misc cleanups and small enhancements all around the map"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/compressed: Fix debug_puthex() parameter type
  x86/setup: Fix static memory detection
  x86/vmlinux: Drop unneeded linker script discard of .eh_frame
  x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
  x86/boot/compressed: Remove .eh_frame section from bzImage
  x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
  x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
  x86/boot/compressed/64: Use LEA to initialize boot stack pointer

In case memory resources for buf were allocated, release them before
return.

Addresses-Coverity-ID: 1492011 ("Resource leak")
Fixes: a7a29f9c ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Included nic tls statistics in ethtool stats.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix an oops in dsa_port_phylink_mac_change() caused by a combination
of a20f9970 ("net: dsa: Don't instantiate phylink for CPU/DSA
ports unless needed") and the net-dsa-improve-serdes-integration
series of patches 65b7a2c8 ("Merge branch
'net-dsa-improve-serdes-integration'").

Unable to handle kernel NULL pointer dereference at virtual address 00000124
pgd = c0004000
[00000124] *pgd=00000000
Internal error: Oops: 805 [#1] SMP ARM
Modules linked in: tag_edsa spi_nor mtd xhci_plat_hcd mv88e6xxx(+) xhci_hcd armada_thermal marvell_cesa dsa_core ehci_orion libdes phy_armada38x_comphy at24 mcp3021 sfp evbug spi_orion sff mdio_i2c
CPU: 1 PID: 214 Comm: irq/55-mv88e6xx Not tainted 5.6.0+ #470
Hardware name: Marvell Armada 380/385 (Device Tree)
PC is at phylink_mac_change+0x10/0x88
LR is at mv88e6352_serdes_irq_status+0x74/0x94 [mv88e6xxx]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A testing message was brought by 13d0f7b8 ("net/bpfilter: fix dprintf
usage for /dev/kmsg") but should've been deleted before patch submission.
Although it doesn't cause any harm to the code or functionality itself, it's
totally unpleasant to have it displayed on every loop iteration with no real
use case. Thus remove it unconditionally.

Fixes: 13d0f7b8 ("net/bpfilter: fix dprintf usage for /dev/kmsg")
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fixed-link nodes are treated as PHY nodes by of_mdiobus_child_is_phy().
We must check if the interface is a fixed-link before looking up for PHY
nodes.

Fixes: 7897b071 ("net: macb: convert to phylink")
Tested-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arm64 updates from Catalin Marinas:
 "The bulk is in-kernel pointer authentication, activity monitors and
  lots of asm symbol annotations. I also queued the sys_mremap() patch
  commenting the asymmetry in the address untagging.

  Summary:

   - In-kernel Pointer Authentication support (previously only offered
     to user space).

   - ARM Activity Monitors (AMU) extension support allowing better CPU
     utilisation numbers for the scheduler (frequency invariance).

   - Memory hot-remove support for arm64.

   - Lots of asm annotations (SYM_*) in preparation for the in-kernel
     Branch Target Identification (BTI) support.

   - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
     PMU init callbacks, support for new DT compatibles.

   - IPv6 header checksum optimisation.

   - Fixes: SDEI (software delegated exception interface) double-lock on
     hibernate with shared events.

   - Minor clean-ups and refactoring: cpu_ops accessor,
     cpu_do_switch_mm() converted to C, cpufeature finalisation helper.

   - sys_mremap() comment explaining the asymmetric address untagging
     behaviour"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  mm/mremap: Add comment explaining the untagging behaviour of mremap()
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed
  arm64: move kimage_vaddr to .rodata
  arm64: use mov_q instead of literal ldr
  arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
  lkdtm: arm64: test kernel pointer authentication
  arm64: compile the kernel with ptrauth return address signing
  kconfig: Add support for 'as-option'
  arm64: suspend: restore the kernel ptrauth keys
  arm64: __show_regs: strip PAC from lr in printk
  arm64: unwind: strip PAC from kernel addresses
  arm64: mask PAC bits of __builtin_return_address
  arm64: initialize ptrauth keys for kernel booting task
  arm64: initialize and switch ptrauth kernel keys
  arm64: enable ptrauth earlier
  arm64: cpufeature: handle conflicts based on capability
  arm64: cpufeature: Move cpu capability helpers inside C file
  ...

KSZ protocol tag is needed by the KSZ DSA drivers.

Fixes: 0b9f9dfb ("dsa: Allow tag drivers to be built as modules")
Tested-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>