Merge tag 'iio-for-3.11c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third round of IIO new stuff, cleanups and staging graduations for the 3.11
cycle.

1) Add clock consumer support and device tree bindings to adf4350.
   The clock consumer part depends on a not so optional 'optional'
   implementation of clock_round_rate which is not present for pxa27x.
   It will be shortly and as no one actually uses this chip with that
   sub arch as far as we know, no need to delay the inclusion in the
   meantime. See
   http://lkml.indiana.edu/hypermail/linux/kernel/1306.1/00023.html
   for the brief discussion.  This may be the first non soc specific driver
   that makes use of that function.

2) AD7303 DAC new driver.

3) ADIS16130 minor fixes and improvements plus move out of staging.

4) AD7291 improvements to bring it inline with more recent drivers.

5) Update to the sysfs ABI doc to fix some out of date paths.

Add platform_data for the driver which allows to specify whether an external
reference voltage is used or not. It is not possible to use the return value of
regulator_get() for this since the regulator framework is able to return a dummy
regulator in case no regulator has been specified. In this case the driver will
always get a valid regulator, no matter if it has been specified or not.  Also
make the regulator non-optional if platform_data states that an external
reference voltage should be used.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This makes it a bit more obvious what is going on than open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

No need to swap the upper and lower byte by hand if there is a helper function
which already does this.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The AD7291 register map is nicely uniform and we can easily compute the
threshold register address for a certain channel using simple math instead of
using a look-up table.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

No need spam the log during probe if nothing went wrong.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

There is no reason why userspace should want to trigger a manual reset of the
device, so remove this functionality.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This is a bit more straight forward and also allows better precession when using
the an in-kernel consumer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch fixes the macros in r8192U.h.
More specifically:

1) removes the ';' from the end of the macro definition
   and changes according the files that are affected by
   this change by adding ';' at the end of the macro call
2) replaces printk with pr_debug, when applicable
3) replaces __FUNCTION__ with __func__
4) fixes the framing when the macro contains complex expressions
5) renames macro 'assert' as 'RTL9192U_ASSERT', so that it
   cannot be confused with the c function assert(), and changes
   accordingly the files affected by this change
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This parch fixes the following checkpatch errors:
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '='
ERROR: spaces required around that '<'
ERROR: space required after that ','
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the whitespace around braces and brace
position, and corrects the following checkpatch errors:
ERROR: space required after that close brace '}'
ERROR: space required before the open brace '{'
ERROR: that open brace { should be on the previous line
ERROR: open brace '{' following enum go on the same line
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the comments in r8192U.h by:

1) replacing '// ... ' comments with '/* ... */' comments
2) removing from the comments the date and the developer's name
3) removing unnecessary comments when variables naming is
   descriptive enough

Also, it fixes some typos found in the comments and arranges
the comments placement and content aiming to improve code
readability and to limit line length below 80 chars, without
loosing the comment's substance.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes commented-out code to improve code
readability.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to the comedi documentation at the beginning of the file,
configuration option 2 sets the number of DIO channels on the boards
that support 144 or 96 channels.

Fix the (*attach) to use the correct configuration option.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up the multi-line comments are the beginning of the file to follow
the CodingStyle.

Cleanup the comedi comment block about the driver to follow the normal
comedi style.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This data in the boardinfo is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Consolidate the special handling of the 'hoard->can_have96' flag.
This flag overrides the iorange and n_subdevices for the PCL-724
board when it is used in a 96 DIO configuration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

subdev_8255_init() can fail, make sure to check for it and return
the errno.

The private function subdev_8255_cb() is identical to the default
io callback used by the 8255 driver. Remove it and pass NULL to
subdev_8255_init() so the default callback will be used.

The private function subdev_8255mapped_cb() is used for the memory
memory mapped io of the pet48dio board. Rename this function so
it has namespace associated with the driver.

Casting the iobase passed to subdev_8255_init() is not needed.
Use a local variable for the iobase and remove the casts.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unnecessary comments and reorder the variables a bit.

Change the 'is_*' and 'can_*' flags to bit fields.

Remove the '*_SIZE' defines and open code the values.

Reorder the boardinfo declaration to follow the definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All uninitialized data will default to 0.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the boardinfo declaration to C99 format and move it near the
struct definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Interrupt support in this driver is not complete.

Remove the #ifdef'ed out code in pcl724_attach() that validates
the interrupt number and does the request_irq().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 75096579 ("lib: devres: Introduce devm_ioremap_resource()")
introduced devm_ioremap_resource() and deprecated the use of
devm_request_and_ioremap().
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
CC: devel@driverdev.osuosl.org
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ft1000dev->tx_urb and ft1000dev->rx_urb are not deallocated
if something goes wrong in ft1000_probe(). Also there is no
check for success of urb allocation. The patch fixes the both issues.

By the way, there is no sense in GFP_ATOMIC for urb allocation here,
so it is changed to GFP_KERNEL.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

update ABI documentation with current paths related to scan_elements folder

Paths changed long time ago in commit: 26d25ae3Signed-off-by: Alexandre Relange <alexandre@relange.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The adis16130 driver is fairly simple and it a good shape now, so move it out of
staging. Remove an outdated FIXME along the way.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Report scale and offset for the temperature and voltage channels.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The driver first does a proper read of the data register, but right after that
it does a spi_read, which will overwrite the initial result.

It looks as if the extra spi_read was accidentally introduced in commit
a5e7363c ("staging:iio:gyro:adis16130 drop control of adc resolution."), quite
likely due to a bad rebase.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds support for the AD7303. The AD7303 is a simple 2 channel 8 bit
DAC with an SPI interface.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Per review feedback from Lars-Peter Clausen <lars@metafoo.de>
Changes since V1:
	Fix return value handling of adf4350_parse_dt()
	Use of_get_gpio
	Avoid abbreviations in devicetree properties
	Fix typo in docs
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Preferably get clkin (PLL reference clock) from clock framework
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

make ARCH=i386 allyesconfig gave bellow errors:

   drivers/built-in.o: In function `kiblnd_create_conn':
>> (.text+0x1a74425): undefined reference to `__umoddi3'
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Need use the proper jiffy comparison macros/functions instead of open
coding 'jiffies'.

The original 'comparation' is always true.

The related warning (with 'EXTRA_CFLAGS=-W')
  drivers/staging/dgrp/dgrp_net_ops.c:1610:10: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Type of variable 'bi' is struct comedi_bufinfo and 'subdevice' is
defined as unsigned, so there is no need to check if it is less then
zero.
Signed-off-by: Güngör Erseymen <gelurine@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Type of variable 'bc' is struct comedi_bufconfig and 'subdevice' is
defined as unsigned, so there is no need to check if it is less then
zero.
Signed-off-by: Güngör Erseymen <gelurine@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a MODULE_DEVICE_TABLE annotation so that parallel display module
can be autoloaded based on the device-tree information.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to return a negative error code in the class_create() error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to csr_framework_ext.h that fixes indentation coding style
issues found by the checkpatch.pl tool.
Signed-off-by: Davis Abubakr-Sadik Nii Nai <dwa2pac@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>