- 12 Feb, 2024 1 commit
-
-
Arnd Bergmann authored
The #ifdef check around the function definition for two functions was changed without also changing the one on the declaration: drivers/net/wireless/intel/iwlwifi/fw/uefi.c:359:6: error: redefinition of 'iwl_uefi_get_sgom_table' 359 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans, | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/net/wireless/intel/iwlwifi/fw/uefi.c:11: drivers/net/wireless/intel/iwlwifi/fw/uefi.h:294:6: note: previous definition of 'iwl_uefi_get_sgom_table' with type 'void(struct iwl_trans *, struct iwl_fw_runtime *)' 294 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans, struct iwl_fw_runtime *fwrt) | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/intel/iwlwifi/fw/uefi.c:392:5: error: redefinition of 'iwl_uefi_get_uats_table' 392 | int iwl_uefi_get_uats_table(struct iwl_trans *trans, | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/intel/iwlwifi/fw/uefi.h:299:5: note: previous definition of 'iwl_uefi_get_uats_table' with type 'int(struct iwl_trans *, struct iwl_fw_runtime *)' 299 | int iwl_uefi_get_uats_table(struct iwl_trans *trans, | ^~~~~~~~~~~~~~~~~~~~~~~ Adapt it by merging the declarations into the existing #ifdef block. Fixes: 74f4cd71 ("wifi: iwlwifi: take SGOM and UATS code out of ACPI ifdef") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://msgid.link/20240212112343.1148931-1-arnd@kernel.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 09 Feb, 2024 1 commit
-
-
Johannes Berg authored
This was still referring to cfg80211_chandef_primary_freq(), fix it. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: b82730bf ("wifi: cfg80211/mac80211: move puncturing into chandef") Signed-off-by:
-
- 08 Feb, 2024 38 commits
-
-
Johannes Berg authored
We've seen this warning trigger, and while the reason is probably obvious, I haven't been able to see it yet. Add more information to the warning message to help identify the cause. Also print out both index and SSN for all the messages. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.581427dc81fc.I9a109d02b4349807dce521c693ecd3516ec58cc0@changeidSigned-off-by:
-
Johannes Berg authored
This is always a bit confusing, the code first does all the reclaim (with its own debug messages), and _then_ prints it got a BA notification from firmware. Turn that around. Signed-off-by:
-
Johannes Berg authored
If this warning triggers we don't really know why, print out the return value so we can see it. Signed-off-by:
-
Johannes Berg authored
The flags argument to enable/disable beacon filtering functions is unused and always zero, so just remove it. Signed-off-by:
-
Johannes Berg authored
The firmware (later) actually uses the values even for keys that are invalid as far as the host is concerned, later in rekeying, and then only sets the low 48 bits since the PNs are only 48 bits over the air. It does, however, compare the full 64 bits later, obviously causing problems. Remove the memset and use kzalloc instead to avoid any old heap data leaking to the firmware. We already init all the other fields in the struct anyway. This leaves the data set to zero for any unused fields, so the firmware can look at them safely even if they're not used right now. Fixes: 79e561f0 ("iwlwifi: mvm: d3: implement RSC command version 5") Signed-off-by:
-
Mukesh Sisodiya authored
Add the support for a new PCIE device-id 0x272E and a new CNVI type. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Newer firmware versions no longer needs this command. Don't send it if the firmware advertises it does not need it. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
The firmware doesn't need the MFP flag for the GTK, it can even make the firmware crash. in case the AP is configured with: group cipher TKIP and MFPC. We would send the GTK with cipher = TKIP and MFP which is of course not possible. Fixes: 5c75a208 ("wifi: iwlwifi: mvm: support new key API") Signed-off-by:
-
Johannes Berg authored
This image can be pretty big (I've seen order-7 allocations!), and we later have to copy it to DMA memory (in newer FW even there it won't need to be contiguous), so we can easily deal with it being in vmalloc. Use kvmemdup()/kvfree() for it. Signed-off-by:
-
Johannes Berg authored
For non-QoS nullfunc packets we currently do the duplicate detection, which seems a bit wrong. Fix the code to check for _any_ instead of just _qos_ nullfunc. Also remove setting the RX_FLAG_DUP_VALIDATED flag, we haven't done anything here; in particular, we haven't checked for multicast in an MLO scenario. Signed-off-by:
-
Johannes Berg authored
When retrieving the queue index ("SCD SSN") from the TX response, it's currently masked with 0xFFF. However, now that we have queues longer than 4k, that became wrong, so make the mask depend on the hardware family. This fixes an issue where if we get a single frame reclaim while in the top half of an 8k long queue, we'd reclaim-wrap the queue twice (once on this and then again on the next non-single reclaim) which at least triggers the WARN_ON_ONCE() in iwl_txq_reclaim(), but could have other negative side effects (such as unmapping a frame that wasn't transmitted yet, and then taking an IOMMU fault) as well. Fixes: 7b3e42ea ("iwlwifi: support multiple tfd queue max sizes for different devices") Signed-off-by: -
Shaul Triebitz authored
After waking from D3, we set the iPN given by the firmware. For some reason, CIPHER_SUITE_AES_CMAC was missed. That caused copying garbage to the iPN - causing false replays. (since 'seq' is on the stack, and the iPN from the firmware was not copied into it, it contains garbage which later is copied to the iPN key). Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Shaul Triebitz authored
If during D3 there was both a GTK rekey and a disconnection, when waking up, we must first update the new keys and then disconnect. The reason is that when disconnecting we first need to remove the keys. Trying to remove invalid keys results in firmware assert. Signed-off-by:
-
Johannes Berg authored
With unlimited pseudo-D3, we can get stuck here in the read if the firmware never wakes up. All of our testing infrastructure however will anyway give up after at most a minute, so there's no value in that. Limit this to about a minute to avoid getting stuck with the RTNL held forever, which basically makes the machine unusable and then we can't even understand what caused the failure. Signed-off-by:
-
Johannes Berg authored
WARN() returns the value of the condition, so it's nicer to combine the warning and the if. Signed-off-by:
-
Shaul Triebitz authored
When waking from D3 (and a GTK rekey happened during D3), the key itself is saved in iwl_wowlan_status_data::gtk array, but the PN is saved in iwl_wowlan_status_data::gtk_seq array. The indices (of the same key) might differ in both arrays. Fix using the gtk array index in the gtk_seq array. Rather, iterate and search for the correct key in the gtk_seq array. Signed-off-by:
-
Daniel Amosi authored
The client needs to disconnect from AP in case of more than 19 missed beacons only if no data is coming from that AP, otherwise it needs to stay connected. Signed-off-by:
Daniel Amosi <amosi.daniel@intel.com> Signed-off-by:
-
Miri Korenblit authored
Before sending SESSION PROTECTION cmd the driver verifies that the link for which the cmd is going to be sent is active. The existing code is checking it only for MLD vifs, but also the deflink (in non-MLD vifs) needs to be active in order the have a session protection for it. Fix this by checking if the link is active also for non-MLD vifs Fixes: 13506583 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd") Signed-off-by:
-
Miri Korenblit authored
The BIOS tables SGOM and UATS are read from UEFI, but require additional tables (WGDS and DSM func 3, respectively) which used to be read from ACPI only, so the code handling those tables had to be under ifdef ACPI. But now the driver reads those tables (WGDS and DSM) from both ACPI and UEFI, so SGOM and UATS code shouldn't be under ifdef ACPI anymore. Signed-off-by:
-
Johannes Berg authored
CT kill should stop doing a lot of TX etc. to cool down the NIC, but we don't stop all commands from going to the NIC, and as such we shouldn't abort queue sync, since it can get confused if we do, warning that we do it twice at the same time etc. Only stop it when we'd also not send it in the first place. Signed-off-by:
-
Shaul Triebitz authored
define the timeout on RX queues notification as a macro so it will be clearer. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
It's a bit tricky to understand what's going on here, add more data to the warning messages to make that clearer. Signed-off-by:
-
Ilan Peer authored
Declare support for secure LTF measurement if the FW supports it. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Avraham Stern authored
Advertise support for protected ranging negotiation if the firmware supports it. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Reviewed-by:
-
Johannes Berg authored
As documented in the comment, this queue sync was here to ensure that an async IWL_MVM_RXQ_NSSN_SYNC queue sync won't race with setting up a new BA session with the same BAID. However, we no longer do IWL_MVM_RXQ_NSSN_SYNC queue sync, so we can remove this as well. Signed-off-by:
-
Miri Korenblit authored
sku_cap_11be_enable should be set to true also for WH. Fixes: e1374ed2 ("wifi: iwlwifi: Add support for new CNVi (SC)") Signed-off-by:
-
Emmanuel Grumbach authored
This is no longer supported by the firmware. Signed-off-by:
-
Johannes Berg authored
This can take some time, so it's better to use the unbound workqueue. Signed-off-by:
-
Johannes Berg authored
The code here is the pre-MLD API, but of course older FW that doesn't support MLD APIs cannot support EHT. Remove some code that shouldn't be there. Signed-off-by:
-
Miri Korenblit authored
in BZ, the mac step is not updated to the HW REV CSR. For BZ-I, read it from the CNVI aux register For BZ-U always take B step. Signed-off-by:
-
Miri Korenblit authored
This debugfs entry is used to configure the rx_phyinfo. Currently we are sending the phy cmd only for the deflink. Change it to send the cmd for all active links of the vif Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240204235836.a68ee2b6cb58.Iddc47c608ec990b12be0ae5b1ee89bcf6beb0f6a@changeidSigned-off-by:
-
Johannes Berg authored
In much of the PHY context handling code the chandef coming from mac80211 is read-only, mark them const to make that clearer. Signed-off-by:
-
Anjaneyulu authored
Add support for - PPAG revision 3 in BIOS to enable PPAG in UHB - PPAG command version 5, this command allows OEM to control enablement of PPAG for LPI for UHB mode in USA and ETSI countries. Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Johannes Berg authored
On new devices the HW rfkill shutdown doesn't need to be handled "as fast as possible", so disallow the immediate shutdown mode here via documentation and a warning. Signed-off-by:
-
Miri Korenblit authored
Add HONOR to the list of the OEMs that are allowed to use the PPAG feature Signed-off-by:
-
Aditya Kumar Singh authored
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a finalizing worker using the deflink. With MLO, there is a need to do it on a given link basis. Pass link ID of the link on which CSA needs to be finalized. Signed-off-by:
Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.comSigned-off-by:
-
Aditya Kumar Singh authored
Add changes to start a channel switch as well as finalize it on link basis in order to support CSA with MLO as well. Signed-off-by:
-
Aditya Kumar Singh authored
In order to support CSA with MLO, there is a need to handle the functions ieee80211_set_csa_beacon() and ieee80211_set_after_csa_beacon() on a per link basis. Implement this by making the function argument accept the the link data instead of the sdata. Currently, deflink would only be passed. Proper link data will be passed in a subsequent patch. Signed-off-by:
-
