If either the compressor and/or zpool param are invalid at boot, and
their default value is also invalid, set the param to the empty string
to indicate there is no compressor and/or zpool configured.  This allows
users to check the sysfs interface to see which param needs changing.

Link: http://lkml.kernel.org/r/20170124200259.16191-4-ddstreet@ieee.orgSigned-off-by: Dan Streetman <dan.streetman@canonical.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow zswap to initialize at boot even if it can't create its pool due
to a failure to create a zpool and/or compressor.  Allow those to be
created later, from the sysfs module param interface.

Link: http://lkml.kernel.org/r/20170124200259.16191-3-ddstreet@ieee.orgSigned-off-by: Dan Streetman <dan.streetman@canonical.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The two alternative implementations of dax_iomap_fault have different
prototypes, and one of them is obviously wrong as seen from this build
warning:

  fs/dax.c: In function 'dax_iomap_fault':
  fs/dax.c:1462:35: error: passing argument 2 of 'dax_iomap_pmd_fault' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]

This marks the argument 'const' as in all the related functions.

Fixes: a2d58167 ("mm,fs,dax: change ->pmd_fault to ->huge_fault")
Link: http://lkml.kernel.org/r/20170227203349.3318733-1-arnd@arndb.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull watchdog updates from Guenter Roeck:
 "Wim asked me to handle the watchdog pull request this time around.

  Key changes:

   - New drivers: Cortina Gemini, ZTE's zx2967 family, NIC7018

   - Convert to use device managed functions: ebc-c384_wdt, tegra_wdt,
     da9063_wdt, da9062_wdt, da9055_wdt, da9052_wdt, bcm2835_wdt,
     mena21_wdt, wm831x_wdt, digicolor_wdt, intel-mid_wdt, meson_wdt,
     sunxi_wdt, aspeed_wdt, coh901327_wdt, iTCO_wdt

   - Use watchdog core to install restart handler: tangox, dw_wdt,
     bcm2835_wdt, asm9260_wdt, bcm47xx_wdt

   - Convert ts72xx_wdt driver to watchdog core

   - Let core handle heartbeat in ep93xx_wdt driver

   - Enable COMPILE_TEST where possible

   - Various other improvements"

* tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
  watchdog: s3c2410: Add prefix to local function
  watchdog: s3c2410: Select MFD_SYSCON on all Exynos platforms
  watchdog: s3c2410: Use dev_dbg instead of pr_info
  watchdog: s3c2410: Fix infinite interrupt in soft mode
  watchdog: s3c2410: Remove confusing CONFIG prefix from local defines
  watchdog: softdog: make pretimeout support a compile option
  watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family watchdog controller
  watchdog: sama5d4: Implement resume hook
  watchdog: sama5d4: Cache MR instead of a partial config
  watchdog: ts72xx_wdt: convert driver to watchdog core
  watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeat
  watchdog: RDC321X_WDT always depends on PCI
  watchdog: add driver for Cortina Gemini watchdog
  watchdog: add DT bindings for Cortina Gemini
  watchdog: constify watchdog_ops structures
  watchdog: Introduce watchdog_stop_on_unregister helper
  watchdog: ebc-c384_wdt: Utilize devm_ functions in driver probe callback
  watchdog: tegra_wdt: Convert to use device managed functions
  watchdog: da9063_wdt: Convert to use device managed functions
  ...

Merge tag 'linux-kselftest-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:
 "This update consists of:

   - fixes to several existing tests from Stafford Horne

   - cpufreq tests from Viresh Kumar

   - Selftest build and install fixes from Bamvor Jian Zhang and Michael
     Ellerman

   - Fixes to protection-keys tests from Dave Hansen

   - Warning fixes from Shuah Khan"

* tag 'linux-kselftest-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
  selftests/powerpc: Fix remaining fallout from recent changes
  selftests/powerpc: Fix the clean rule since recent changes
  selftests: Fix the .S and .S -> .o rules
  selftests: Fix the .c linking rule
  selftests: Fix selftests build to just build, not run tests
  selftests, x86, protection_keys: fix wrong offset in siginfo
  selftests, x86, protection_keys: fix uninitialized variable warning
  selftest: cpufreq: Update MAINTAINERS file
  selftest: cpufreq: Add special tests
  selftest: cpufreq: Add support to test cpufreq modules
  selftest: cpufreq: Add suspend/resume/hibernate support
  selftest: cpufreq: Add support for cpufreq tests
  selftests: Add intel_pstate to TARGETS
  selftests/intel_pstate: Update makefile to match new style
  selftests/intel_pstate: Fix warning on loop index overflow
  cpupower: Restore format of frequency-info limit
  selftests/futex: Add headers to makefile dependencies
  selftests/futex: Add stdio used for logging
  selftests: x86 protection_keys remove dead code
  selftests: x86 protection_keys fix unused variable compile warnings
  ...

Pull orangefs updates from Mike Marshall:
 "Orangefs: cleanups, a protocol fix and an added configuration button.

  Cleanups:

   - silence harmless integer overflow warning (from
     dan.carpenter@oracle.com)

   - Dan Carpenter influenced debugfs cleanups.

   - remove orangefs_backing_dev_info (from jack@suse.cz)

  Protocol fix:

   - fix buffer size mis-match between kernel space and user space

  New configuration button:

   - support readahead_readcnt parameter"

* tag 'for-linus-4.11-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: fix buffer size mis-match between kernel space and user space.
  orangefs: Dan Carpenter influenced cleanups...
  orangefs: Remove orangefs_backing_dev_info
  orangefs: Support readahead_readcnt parameter.
  orangefs: silence harmless integer overflow warning

Pull btrfs updates from Chris Mason:
 "This has a series of fixes and cleanups that Dave Sterba has been
  collecting.

  There is a pretty big variety here, cleaning up internal APIs and
  fixing corner cases"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (124 commits)
  Btrfs: use the correct type when creating cow dio extent
  Btrfs: fix deadlock between dedup on same file and starting writeback
  btrfs: use btrfs_debug instead of pr_debug in transaction abort
  btrfs: btrfs_truncate_free_space_cache always allocates path
  btrfs: free-space-cache, clean up unnecessary root arguments
  btrfs: convert btrfs_inc_block_group_ro to accept fs_info
  btrfs: flush_space always takes fs_info->fs_root
  btrfs: pass fs_info to (more) routines that are only called with extent_root
  btrfs: qgroup: Move half of the qgroup accounting time out of commit trans
  btrfs: remove unused parameter from adjust_slots_upwards
  btrfs: remove unused parameters from __btrfs_write_out_cache
  btrfs: remove unused parameter from cleanup_write_cache_enospc
  btrfs: remove unused parameter from __add_inode_ref
  btrfs: remove unused parameter from clone_copy_inline_extent
  btrfs: remove unused parameters from btrfs_cmp_data
  btrfs: remove unused parameter from __add_inline_refs
  btrfs: remove unused parameters from scrub_setup_wr_ctx
  btrfs: remove unused parameter from create_snapshot
  btrfs: remove unused parameter from init_first_rw_device
  btrfs: remove unused parameter from __btrfs_alloc_chunk
  ...

Pull x86 platform driver updates from Darren Hart:
 "Big picture:

   - New intel_turbo_max_3 driver, providing max core frequency
     information to the scheduler. Intel PMC APL support, s0ix read API,
     and fixes.

   - New Silead touchscreen platform touchscreen descriptions.
     Additional hotkey support for the intel-hid driver.

   - New model support for dell-laptop and hp_accel.

   - Several cleanups, especially to the fujitsu-laptop and
     intel_mid_powerbtn drivers.

  Detail summary:

  platorm/x86:
   - silead depends on I2C being built-in
   - add support for devices with Silead touchscreens
   - Support Turbo Boost Max 3.0 for non HWP systems

  intel_turbo_max_3:
   - make it explicitly non-modular

  dell-laptop:
   - Add Latitude 7480 and others to the DMI whitelist

  intel-hid:
   - Support 5 button array

  thinkpad_acpi:
   - Call led_classdev_notify_brightness_hw_changed on kbd brightness change
   - Use brightness_set_blocking callback for LEDs
   - Stop setting led_classdev brightness directly

  acer-wmi:
   - add another KEY_WLAN keycode
   - Inform firmware that RF Button Driver is active
   - setup accelerometer when machine has appropriate notify event

  asus-wireless:
   - Fix indentation
   - Use per-HID HSWC parameters

  intel_pmc_ipc:
   - Add APL PMC PCI Id
   - read s0ix residency API
   - Remove unused iTCO_version variable

  alienware-wmi:
   - Remove header duplicate

  intel_pmc_core:
   - fix out-of-bounds accesses on stack

  intel_mid_powerbtn:
   - Use SCU IPC directly
   - Unify IRQ acknowledgment
   - Move comment to where it belongs
   - Unify PBSTATUS access
   - Remove snail address
   - Sort headers alphabetically
   - Join string literals
   - Enable driver for Merrifield
   - Acknowledge interrupts
   - Factor out mfld_ack()
   - Introduce driver data
   - Substitute mfld by mid
   - Convert to use devm_*()

  fujitsu-laptop:
   - make hotkey handling functions more similar
   - break up complex loop condition
   - move keycode processing to separate functions
   - decrease indentation in acpi_fujitsu_hotkey_notify()
   - simplify logolamp_get()
   - rework logolamp_set() to properly handle errors
   - set default trigger for radio LED to rfkill-any

  dell-smbios:
   - Auto-select as needed

  intel_mid_thermal:
   - Fix module autoload
   - Remove duplicated platform device ID

  mlx-platform:
   - mlxcpld-hotplug driver style fixes

  hp_accel:
   - Add support for HP ZBook 17"

* tag 'platform-drivers-x86-v4.11-1' of git://git.infradead.org/linux-platform-drivers-x86: (45 commits)
  platform/x86: intel_turbo_max_3: make it explicitly non-modular
  platform/x86: dell-laptop: Add Latitude 7480 and others to the DMI whitelist
  platform/x86: intel-hid: Support 5 button array
  platform/x86: thinkpad_acpi: Call led_classdev_notify_brightness_hw_changed on kbd brightness change
  platform/x86: thinkpad_acpi: Use brightness_set_blocking callback for LEDs
  platform/x86: thinkpad_acpi: Stop setting led_classdev brightness directly
  leds: class: Add new optional brightness_hw_changed attribute
  platform/x86: acer-wmi: add another KEY_WLAN keycode
  platform/x86: acer-wmi: Inform firmware that RF Button Driver is active
  platform/x86: asus-wireless: Fix indentation
  platform/x86: asus-wireless: Use per-HID HSWC parameters
  platform/x86: intel_pmc_ipc: Add APL PMC PCI Id
  platform/x86: intel_pmc_ipc: read s0ix residency API
  platform/x86: alienware-wmi: Remove header duplicate
  platform/x86: intel_mid_powerbtn: Use SCU IPC directly
  platform/x86: intel_mid_powerbtn: Unify IRQ acknowledgment
  platform/x86: intel_mid_powerbtn: Move comment to where it belongs
  platform/x86: intel_mid_powerbtn: Unify PBSTATUS access
  platform/x86: intel_pmc_core: fix out-of-bounds accesses on stack
  platform/x86: silead depends on I2C being built-in
  ...

Pull clk updates from Stephen Boyd:
 "The usual collection of new drivers, non-critical fixes, and updates
  to existing clk drivers. The bulk of the work is on Allwinner and
  Rockchip SoCs, but there's also an Intel Atom driver in here too.

  New Drivers:
   - Tegra BPMP firmware
   - Hisilicon hi3660 SoCs
   - Rockchip rk3328 SoCs
   - Intel Atom PMC
   - STM32F746
   - IDT VersaClock 5P49V5923 and 5P49V5933
   - Marvell mv98dx3236 SoCs
   - Allwinner V3s SoCs

  Removed Drivers:
   - Samsung Exynos4415 SoCs

  Updates:
   - Migrate ABx500 to OF
   - Qualcomm IPQ4019 CPU clks and general PLL support
   - Qualcomm MSM8974 RPM
   - Rockchip non-critical fixes and clk id additions
   - Samsung Exynos4412 CPUs
   - Socionext UniPhier NAND and eMMC support
   - ZTE zx296718 i2s and other audio clks
   - Renesas CAN and MSIOF clks for R-Car M3-W
   - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
   - TI CDCE913, CDCE937, and CDCE949 clk generators
   - Marvell Armada ap806 CPU frequencies
   - STM32F4* I2S/SAI support
   - Broadcom BCM2835 DSI support
   - Allwinner sun5i and A80 conversion to new style clk bindings"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits)
  clk: renesas: mstp: ensure register writes complete
  clk: qcom: Do not drop device node twice
  clk: mvebu: adjust clock handling for the CP110 system controller
  clk: mvebu: Expand mv98dx3236-core-clock support
  clk: zte: add i2s clocks for zx296718
  clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()
  clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i
  clk: sunxi-ng: Check kzalloc() for errors and cleanup error path
  clk: tegra: Add BPMP clock driver
  clk: uniphier: add eMMC clock for LD11 and LD20 SoCs
  clk: uniphier: add NAND clock for all UniPhier SoCs
  ARM: dts: sun9i: Switch to new clock bindings
  clk: sunxi-ng: Add A80 Display Engine CCU
  clk: sunxi-ng: Add A80 USB CCU
  clk: sunxi-ng: Add A80 CCU
  clk: sunxi-ng: Support separately grouped PLL lock status register
  clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT
  clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag
  clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers
  clk: qcom: SDHCI enablement on Nexus 5X / 6P
  ...

Pull i2c updates from Wolfram Sang:
 "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt
  support for pca954x muxes, and a bunch of driver bugfixes and
  improvements. Nothing really special this cycle.

  A few commits have been added to my tree just recently. Those are the
  Tegra BPMP driver and a few straightforward bugfixes or cleanups which
  I prefer to have upstream rather soonish. The rest had proper
  linux-next exposure"

* 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits)
  i2c: thunderx: Replace pci_enable_msix()
  i2c: exynos5: fix arbitration lost handling
  i2c: exynos5: disable fifo-almost-empty irq signal when necessary
  i2c: at91: ensure state is restored after suspending
  i2c: bcm2835: Avoid possible NULL ptr dereference
  i2c: Add Tegra BPMP I2C proxy driver
  dt-bindings: Add Tegra186 BPMP I2C binding
  misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
  i2c: mux: pca954x: Add interrupt controller support
  dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
  i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
  i2c: riic: correctly finish transfers
  i2c: i801: Add support for Intel Gemini Lake
  i2c: mux: pca9541: Export OF device ID table as module aliases
  i2c: mux: pca954x: Export OF device ID table as module aliases
  i2c: mux: mlxcpld: remove unused including <linux/version.h>
  i2c: busses: constify i2c_algorithm structures
  i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
  i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
  i2c: i2c-cros-ec-tunnel: Reduce logging noise
  ...

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...

Pull fbdev updates from Bartlomiej Zolnierkiewicz:

 - fix for font color when console is switched to another fb driver

 - deferred probing fixes for simplefb driver

 - preparations to add support of an optional GPIO to enable panel for
   ARM CLCD driver

 - some improvements for ssd1307fb driver

 - cleanups for OMAP fbdev LCD drivers

 - misc fixes/cleanups for various fb drivers

* tag 'fbdev-v4.11' of git://github.com/bzolnier/linux: (30 commits)
  video: fbdev: fsl-diu-fb: fix spelling mistake "palette"
  fbdev: ssd1307fb: include linux/gpio/consumer.h
  video: fbdev: fsl-diu-fb: remove impossible condition
  video: fbdev: amifb: remove impossible condition
  fbdev/ssd1307fb: clear screen in probe
  fbdev/ssd1307fb: add support to enable VBAT
  fbdev: ssd1307fb: Make reset gpio devicetree property optional
  fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
  fbdev: ssd1307fb: Start to use gpiod API for reset gpio
  video: fbdev: sh_mobile_lcdcfb: fix error return code in sh_mobile_lcdc_probe()
  video: fbdev: offb: switch to using for_each_node_by_type
  video/console: use setup_timer and mod_timer instead of init_timer
  fbdev: omap/lcd: Make callbacks optional
  fbdev: omap/lcd: Staticize non-exported lcd_panel structs
  fbdev: omap/lcd: Remove no-op driver callbacks
  video/mbx: use simple_open()
  video: fbdev: stifb: handle NULL return value from ioremap_nocache
  video: fbdev: pmagb-b-fb: Remove bad `__init' annotation
  video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
  video: ARM CLCD: use panel device node for getting backlight and mode
  ...

These are the current source files that should not have
executable attributes set.

[ Normally this would be sent through Andrew Morton's tree
  but his quilt tools don't like permission only patches. ]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge more updates from Andrew Morton:

 - almost all of the rest of MM

 - misc bits

 - KASAN updates

 - procfs

 - lib/ updates

 - checkpatch updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (124 commits)
  checkpatch: remove false unbalanced braces warning
  checkpatch: notice unbalanced else braces in a patch
  checkpatch: add another old address for the FSF
  checkpatch: update $logFunctions
  checkpatch: warn on logging continuations
  checkpatch: warn on embedded function names
  lib/lz4: remove back-compat wrappers
  fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version
  crypto: change LZ4 modules to work with new LZ4 module version
  lib/decompress_unlz4: change module to work with new LZ4 module version
  lib: update LZ4 compressor module
  lib/test_sort.c: make it explicitly non-modular
  lib: add CONFIG_TEST_SORT to enable self-test of sort()
  rbtree: use designated initializers
  linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors
  lib/find_bit.c: micro-optimise find_next_*_bit
  lib: add module support to atomic64 tests
  lib: add module support to glob tests
  lib: add module support to crc32 tests
  kernel/ksysfs.c: add __ro_after_init to bin_attribute structure
  ...

mac80211_hwsim initializes a hrtimer with clockid CLOCK_MONOTONIC_RAW.
That's not supported.

Use CLOCK_MONOTNIC instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linux 4.10

The Kconfig currently controlling compilation of this code is:

drivers/platform/x86/Kconfig:config INTEL_TURBO_MAX_3
drivers/platform/x86/Kconfig:   bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

We do uncover some implicit includes during build coverage that
were hidden behind the module.h which pulls in a lot of dependants.

Cc: Andy Shevchenko <andy@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

This is to support Latitude 7480 and many other newer Dell laptops.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

New firmwares include a feature called 5 button array that supports
super key, volume up/down, rotation lock and power button. Support
for this feature is required to fix power button on some recent
systems.

This patch was tested on a Dell Latitude 7480.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

platform/x86: thinkpad_acpi: Call led_classdev_notify_brightness_hw_changed on kbd brightness change

Make thinkpad_acpi call led_classdev_notify_brightness_hw_changed on the
kbd_led led_classdev registered by thinkpad_acpi when the kbd backlight
brightness is changed through the hotkey.

This will allow userspace to monitor (poll) for brightness changes on
these LEDs caused by the hotkey.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>

Now a days the LED core can take care of executing brightness_set from
a workqueue if it needs to sleep, make use of this and remove a bunch
of DIY code for this.

Since this commit removes the workqueue usage for LEDs, the
led_sysfs_blink_set callback may now also sleep, this is fine.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>

There is no need to set the led_classdev's brightness value from
its set_brightness callback, this is taken care of by the led-core and
thinkpad_acpi really should not be mucking with it.

Note that kbdlight_set_level_and_update() is still used by the old
thinpad_acpi specific sysfs interface for the led, so we cannot
remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>

Some LEDs may have their brightness level changed autonomously
(outside of kernel control) by hardware / firmware. This commit
adds support for an optional brightness_hw_changed attribute to
signal such changes to userspace (if a driver can detect them):

What:		/sys/class/leds/<led>/brightness_hw_changed
Date:		January 2017
KernelVersion:	4.11
Description:
		Last hardware set brightness level for this LED. Some LEDs
		may be changed autonomously by hardware/firmware. Only LEDs
		where this happens and the driver can detect this, will
		have this file.

		This file supports poll() to detect when the hardware
		changes the brightness.

		Reading this file will return the last brightness level set
		by the hardware, this may be different from the current
		brightness.

Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to
their flags field and call led_classdev_notify_brightness_hw_changed()
with the hardware set brightness when they detect a hardware / firmware
triggered brightness change.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Now that we have informed the firmware that the RF Button driver is
active, laptops such as the Acer TravelMate P238-M will generate
a WMI key event with code 0x86 when the Fn+F3 airplane mode key is
pressed.

Add this keycode to the table so that it is converted to an appropriate
input event.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The same method to activate LM(Launch Manager) can also be used to
activate the RF Button driver with different bit toggled in the same
lm_status. To express that many functions this byte field can achieve,
rename the lm_status to app_status. And also the app_mask is the bit
mask which specifically indicate which bits are going to be changed.

This solves a problem where the AR9565 wifi included in the
Acer Aspire ES1-421 is permanently hard blocked according to the rfkill
GPIO read by ath9k.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fix indentation problem introduced when this driver was first merged into
the kernel.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Some Asus machines use 0x4/0x5 as their LED on/off values, while others
use 0x0/0x1, as shown in the DSDT excerpts below. Luckily it seems this
behavior is tied to different HIDs, after looking at 44 DSDTs from
different Asus models.

Another small difference is that a few of them call GWBL instead of
OWGS, and SWBL instead of OWGD. That does not seem to make a difference
for asus-wireless, and is additional reasoning to not try to call these
methods directly.

Device (ASHS)                       | Device (ASHS)
{                                   | {
    Name (_HID, "ATK4002")          |     Name (_HID, "ATK4001")
    Method (HSWC, 1, Serialized)    |     Method (HSWC, 1, Serialized)
    {                               |     {
        If ((Arg0 < 0x02))          |         If ((Arg0 < 0x02))
        {                           |         {
            OWGD (Arg0)             |             OWGD (Arg0)
            Return (One)            |             Return (One)
        }                           |         }
        If ((Arg0 == 0x02))         |
        {                           |         If ((Arg0 == 0x02))
            Local0 = OWGS ()        |         {
            If (Local0)             |             Return (OWGS ())
            {                       |         }
                    Return (0x05)   |
            }                       |         If ((Arg0 == 0x03))
            Else                    |         {
            {                       |             Return (0xFF)
                    Return (0x04)   |         }
            }                       |
        }                           |         If ((Arg0 == 0x80))
        If ((Arg0 == 0x03))         |         {
        {                           |            Return (One)
            Return (0xFF)           |         }
        }                           |     }
        If ((Arg0 == 0x04))         |     Method (_STA, 0, NotSerialized)
        {                           |     {
            OWGD (Zero)             |         If ((MSOS () >= OSW8))
            Return (One)            |         {
        }                           |             Return (0x0F)
        If ((Arg0 == 0x05))         |         }
        {                           |         Else
            OWGD (One)              |         {
            Return (One)            |             Return (Zero)
        }                           |         }
        If ((Arg0 == 0x80))         |     }
        {                           | }
            Return (One)            |
        }                           |
    }                               |
    Method (_STA, 0, NotSerialized) |
    {                               |
        If ((MSOS () >= OSW8))      |
        {                           |
            Return (0x0F)           |
        }                           |
        Else                        |
        {                           |
            Return (Zero)           |
        }                           |
    }                               |
}                                   |
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This patch adds the PCI Device id for Power Management Controller on Intel
Apollo Lake platforms.

Intel PMC IPC Driver loads as a platform driver on Apollo Lake platforms
since Intel BIOS hides the PCI Configuration space for 0:13:1 and
re-enumerates it as ACPI device (INT34D2). The correct PCI Device ID should
be added if some platform firmware choses to enumerate the device via PCI
space.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This patch adds a new API to indicate S0ix residency in usec. It utilizes
the PMC Global Control Registers (GCR) to read deep and shallow
S0ix residency.

PMC MMIO resources:
        o Lower 4kB: IPC1 (PMC inter-processor communication) interface
        o Upper 4kB: GCR (Global Control Registers)

This enables the power management framework to take corrective actions when
the platform fails to enter S0ix after kernel freeze as part of the suspend
to idle flow. (echo freeze > /sys/power/state).

This is expected to be used with a S0ix failsafe framework such as:
<https://lwn.net/Articles/689505/>

[rajneesh: folded in "fix division in 32-bit case" from Andy Shevchenko]
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Shanth Murthy <shanth.murthy@intel.com>
[andy: fixed kbuild error, removed "total" from variables, fixed macro]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

No need to #include <linux/acpi.h> twice. Remove second occurrence.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

On older Intel MID platforms is using SCU IPC library beneath MSIC
calls.

To make access unified between old and new platforms use SCU IPC library
directly. It's safe since serialization is done in the library.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The IRQ on Intel Merrifield can be acknowledged in the similar way it's
done for previous MID platforms. Unify acknowledgment via SCU IPC.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull OpenRISC updates from Stafford Horne:
 "Highlights include:

   - optimized memset and memcpy routines, ~20% boot time saving

   - support for cpu idling

   - adding support for l.swa and l.lwa atomic operations (in spec from
     2014)

   - use atomics to implement: bitops, cmpxchg, futex

   - the atomics are in preparation for SMP support"

* tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits)
  openrisc: head: Init r0 to 0 on start
  openrisc: Export ioremap symbols used by modules
  arch/openrisc/lib/memcpy.c: use correct OR1200 option
  openrisc: head: Remove unused strings
  openrisc: head: Move init strings to rodata section
  openrisc: entry: Fix delay slot detection
  openrisc: entry: Whitespace and comment cleanups
  scripts/checkstack.pl: Add openrisc support
  MAINTAINERS: Add the openrisc official repository
  openrisc: Add .gitignore
  openrisc: Add optimized memcpy routine
  openrisc: Add optimized memset
  openrisc: Initial support for the idle state
  openrisc: Fix the bitmask for the unit present register
  openrisc: remove unnecessary stddef.h include
  openrisc: add futex_atomic_* implementations
  openrisc: add optimized atomic operations
  openrisc: add cmpxchg and xchg implementations
  openrisc: add atomic bitops
  openrisc: add l.lwa/l.swa emulation
  ...

Lines containing "} else {" should not be detected as unbalanced braces.
But the second check can be reduced to ".+else\s*{" and it therefore
never checked if the beginning of a line contains any other character
(like the relevant "}").  This check would also return true for "} else
{" and create warnings like

    CHECK: Unbalanced braces around else statement
    #391: FILE: ./net/batman-adv/tvlv.c:391:
    +   } else {

The check can be changed to check the whole line for the missing "}" to
avoid this false positive.

Fixes: 0d1532456c26 ("checkpatch: notice unbalanced else braces in a patch")
Link: http://lkml.kernel.org/r/20170220121644.12209-1-sven@narfation.orgSigned-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patches that add or modify code like

	} else
		<foo>
or
	else {
		<bar>

where one branch appears to have a brace and the other branch does not
have a brace should emit a --strict style message.

Link: http://lkml.kernel.org/r/c6be32747fc725cbc235802991746700a0f54fdc.1486754390.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We still have a lot of old addresses for the FSF in the kernel.

  willy@harry:~/kernel/idr$ git grep '675 Mass' |wc -l
  1502
  willy@harry:~/kernel/idr$ git grep '59 Temple' |wc -l
  2825
  willy@harry:~/kernel/idr$ git grep '51 Franklin' |wc -l
  2020

Let's discourage adding the oldest one too.

Link: http://lkml.kernel.org/r/20170128173052.GA23532@bombadil.infradead.orgSigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently checkpatch.pl does not recognize printk_deferred* functions as
log functions and complains about the line length of printk_deferred*
functions.  Add printk_deferred* to logFunctions to fix it.

Link: http://lkml.kernel.org/r/1484537124-18083-1-git-send-email-miles.chen@mediatek.comSigned-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pr_cont(...) and printk(KERN_CONT ...) uses should be discouraged
as their output can be interleaved by multiple logging processes.

Link: http://lkml.kernel.org/r/7100ba00098694ec81471a299583ed068975fd05.1483465888.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Embedded function names are less appropriate to use when refactoring can
cause function renaming.  Prefer the use of "%s", __func__ to embedded
function names.

Link: http://lkml.kernel.org/r/ac9631fdbac5af3507c5bfe88ad9064f0ed764ec.1483510416.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the functions introduced as wrappers for providing backwards
compatibility to the prior LZ4 version.  They're not needed anymore
since there's no callers left.

Link: http://lkml.kernel.org/r/1486321748-19085-6-git-send-email-4sschmid@informatik.uni-hamburg.deSigned-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>