- 21 Jul, 2014 40 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet: PM and Wake-on-LAN This patchset brings S2/S3 Power Management support to the GENET driver as well as Wake-on-LAN using Magic Packets with or without SecureOn passwords. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Now that Wake-on-LAN support mode is fully integrated into the driver, allow an user to query and configure Wake-on-LAN in the driver. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Update bcmgenet_suspend() to prepare the hardware for being put into Wake-on-LAN mode if the device can wakeup the system, and Wake-on-LAN is enabled. Whether we resume from Wake-on-LAN or not, make sure that bcmgenet_resume() disables the UniMAC MagicPacket matching mode and puts the hardware in a state where it can receive all incoming packets. Signed-off-by:
-
Florian Fainelli authored
bcmgenet_wol_resume() will create an unbalanced clock state for the wol_clk clock pointer since everywhere else in the code, we always call clk_prepare_enable() and clk_disable_unprepare(). This function also calls init_umac() which is neither correct nor necessary since bcmgenet_resume() and bcmgenet_open() already does that. Finally calling bcmgenet_wol_resume() in bcmgenet_open() is not correct, since the interface would not have been able to put us in Wake-on-LAN mode if it was not UP before. Signed-off-by:
-
Florian Fainelli authored
Handle UMAC_IRQ_MPD_R interrupt bit in our workqueue to make sure that we properly re-configure the GENET adapter from Wake-on-LAN. bcmgenet_power_up() makes sure that we will not leave the UniMAC hardware in MagicPacket matching mode, since that would prevent any other packet from being received. Signed-off-by:
-
Florian Fainelli authored
Update bcmgenet_power_{up,down} to handle the case where the adapter has been suspend respectively resumed from Wake-on-LAN using MagicPackets. Signed-off-by: -
Florian Fainelli authored
Add all the required code to program the GENET hardware to enter Wake-on-LAN mode and wake using MagicPackets with or without SecureOn password. This code is hooked to the build system, but is not yet referenced from ethtool or the main bcmgenet driver. Signed-off-by:
-
Florian Fainelli authored
Attempt to the request the Wake-on-LAN interrupt bit, and if successful, advertise wakeup capability instead of doing this unconditionnally. Signed-off-by:
-
Florian Fainelli authored
Implement suspend/resume callbacks in the GENET driver. This makes sure that we de-initialize and re-initialize the hardware correctly before entering suspend and when resuming. Signed-off-by:
-
Florian Fainelli authored
Introduce a bunch of helper functions: bcmgenet_netif_start, bcmgenet_netif_stop and bcmgenet_intr_disable to help reuse code that is going to be necessary for suspend/resume. Signed-off-by:
-
Florian Fainelli authored
Factor the code touching the UniMAC RX/TX enable bits since we are going to re-use it for implementing suspend/resume. Signed-off-by:
-
Florian Fainelli authored
Checking for wol_enabled in bcmgenet_close() is bogus, since no other code places set priv->wol_enabled. Remove that as it will conflict with the upcoming and functional Wake-on-LAN implementation. Signed-off-by:
-
Wei Yongjun authored
Fix to return -ENODEV from the no ports enabled error handling case instead of 0. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: net/tipc/socket.c:545:5: warning: symbol 'tipc_sk_proto_rcv' was not declared. Should it be static? net/tipc/socket.c:2015:5: warning: symbol 'tipc_ioctl' was not declared. Should it be static? Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
David S. Miller authored
Fabian Frederick says: ==================== drivers/net: remove unnecessary break after return Second patchset after "remove unnecessary break after goto" addressing break redundancy on drivers/net branch (suggested by Joe Perches) ==================== Signed-off-by: -
Fabian Frederick authored
Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
