- 19 Jun, 2023 36 commits
-
-
Johannes Thumshirn authored
Mark btrfs_run_discard_work static and move it above its callers. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
This exists internal to ctree.c, however btrfs check needs to use it for some of its operations. I'd rather not duplicate that code inside of btrfs check as this is low level and I want to keep this code in one place, so rename the function to btrfs_del_ptr and export it so that it can be used inside of btrfs-progs safely. Add a comment to make sure this doesn't get removed by a future cleanup. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Josef Bacik authored
This is needed in btrfs-progs for the tools that convert the checksum types for file systems and a few other things. We don't have it in the kernel as we just want to get the size for the super blocks type. However I don't want to have to manually add this every time we sync ctree.c into btrfs-progs, so add the helper in the kernel with a note so it doesn't get removed by a later cleanup. Signed-off-by:
-
Josef Bacik authored
We want to override this in btrfs-progs, so wrap this in the __KERNEL__ check so we can easily sync this to btrfs-progs and have our local version of btrfs_no_printk do the work. Reviewed-by:
-
Josef Bacik authored
These are more related to the inode item flags on disk than the in-memory btrfs_inode, move the helpers to inode-item.h. Reviewed-by:
-
Josef Bacik authored
This is more a buffer validation helper, move it into the tree-checker files where it makes more sense. Reviewed-by:
-
Josef Bacik authored
This helper returns a btrfs_tree_block_status for the various errors, and then btrfs_check_node() will return -EUCLEAN if it gets anything other than BTRFS_TREE_BLOCK_CLEAN which will be used by the kernel. In the future btrfs-progs will use this helper instead. Signed-off-by:
-
Josef Bacik authored
Instead of blanket returning -EUCLEAN for all the failures in btrfs_check_leaf, use btrfs_tree_block_status and return the appropriate status for each failure. Rename the helper to __btrfs_check_leaf and then make a wrapper of btrfs_check_leaf that will return -EUCLEAN to non-clean error codes. This will allow us to have the __btrfs_check_leaf variant in btrfs-progs while keeping the behavior in the kernel consistent. Signed-off-by:
-
Josef Bacik authored
We have a variety of item specific errors that can occur. For now simply put these under the umbrella of BTRFS_TREE_BLOCK_INVALID_ITEM, this can be fleshed out as we need in the future. Reviewed-by:
-
Josef Bacik authored
We use this in btrfs-progs to determine if we can fix different types of corruptions. We don't care about this in the kernel, however it would be good to share this code between the kernel and btrfs-progs, so add the status definitions so we can start converting the tree-checker code over to using these status flags instead of blanket returning -EUCLEAN. Reviewed-by:
-
Josef Bacik authored
We have two helpers for checking leaves, because we have an extra check for debugging in btrfs_mark_buffer_dirty(), and at that stage we may have item data that isn't consistent yet. However we can handle this case internally in the helper, if BTRFS_HEADER_FLAG_WRITTEN is set we know the buffer should be internally consistent, otherwise we need to skip checking the item data. Simplify this helper down a single helper and handle the item data checking logic internally to the helper. Reviewed-by:
-
Josef Bacik authored
We just pass in btrfs_header_level(eb) for the level, and we're passing in the eb already, so simply get the level from the eb inside of btrfs_set_block_flags. Reviewed-by:
-
Josef Bacik authored
This is completely related to block rsv's, move it out of the free space cache code and into block-rsv.c. Reviewed-by:
-
Qu Wenruo authored
For P/Q stripe scrub, we have quite some duplicated read IO: - Data stripes read for verification This is triggered by the scrub_submit_initial_read() inside scrub_raid56_parity_stripe(). - Data stripes read (again) for P/Q stripe verification This is triggered by scrub_assemble_read_bios() from scrub_rbio(). Although we can have hit rbio cache and avoid unnecessary read, the chance is very low, as scrub would easily flush the whole rbio cache. This means, even we're just scrubbing a single P/Q stripe, we would read the data stripes twice for the best case scenario. If we need to recover some data stripes, it would cause more reads on the same data stripes, again and again. However before we call raid56_parity_submit_scrub_rbio() we already have all data stripes repaired and their contents ready to use. But RAID56 cache is unaware about the scrub cache, thus RAID56 layer itself still needs to re-read the data stripes. To avoid such cache miss, this patch would: - Introduce a new helper, raid56_parity_cache_data_pages() This function would grab the pages from an array, and copy the content to the rbio, marking all the involved sectors uptodate. The page copy is unavoidable because of the cache pages of rbio are all self managed, thus can not utilize outside pages without screwing up the lifespan. - Use the repaired data stripes as cache inside scrub_raid56_parity_stripe() By this, we ensure all the data sectors of the scrub rbio are already uptodate, and no need to read them again from disk. Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Filipe Manana authored
Removing a free space entry from an in memory space cache requires having the corresponding btrfs_free_space_ctl's 'tree_lock' held. We have several code paths that remove an entry, so add assertions where appropriate to verify we are holding the lock, as the lock is acquired by some other function up in the call chain, which makes it easy to miss in the future. Note: for this to work we need to lock the local btrfs_free_space_ctl at load_free_space_cache(), which was not being done because it's local, declared on the stack, so no other task has access to it. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
When linking a free space entry, at link_free_space(), the caller should be holding the spinlock 'tree_lock' of the given btrfs_free_space_ctl argument, which is necessary for manipulating the red black tree of free space entries (done by tree_insert_offset(), which already asserts the lock is held) and for manipulating the 'free_space', 'free_extents', 'discardable_extents' and 'discardable_bytes' counters of the given struct btrfs_free_space_ctl. So assert that the spinlock 'tree_lock' of the given btrfs_free_space_ctl is held by the current task. We have multiple code paths that end up calling link_free_space(), and all currently take the lock before calling it. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Filipe Manana authored
When searching for a free space entry by offset, at tree_search_offset(), we are supposed to have the btrfs_free_space_ctl's 'tree_lock' held, so assert that. We have multiple callers of tree_search_offset(), and all currently hold the necessary lock before calling it. Reviewed-by:
-
Filipe Manana authored
There are multiple code paths leading to tree_insert_offset(), and each path takes the necessary locks before tree_insert_offset() is called, since they do other things that require those locks to be held. This makes it easy to miss the locking somewhere, so make tree_insert_offset() assert that the required locks are being held by the calling task. Signed-off-by:
-
Filipe Manana authored
For the in-memory component of space caching (free space cache and free space tree), three of the arguments passed to tree_insert_offset() can always be taken from the new free space entry that we are about to add. So simplify tree_insert_offset() to take the new entry instead of the 'offset', 'node' and 'bitmap' arguments. This will also allow to make further changes simpler. Signed-off-by:
-
Filipe Manana authored
The are two computations of end offsets at do_trimming() that are not necessary, as they were previously computed and stored in local const variables. So just use the variables instead, to make the source code shorter and easier to read. Reviewed-by:
-
Filipe Manana authored
At try_merge_free_space(), avoid calling twice rb_prev() to find the previous node, as that requires looping through the red black tree, so store the result of the rb_prev() call and then use it. Signed-off-by:
-
Filipe Manana authored
At copy_free_space_cache(), we add a new entry to the block group's ctl before we free the entry from the temporary ctl. Adding a new entry requires the allocation of a new struct btrfs_free_space, so we can avoid a temporary extra allocation by freeing the entry from the temporary ctl before we add a new entry to the main ctl, which possibly also reduces the chances for a memory allocation failure in case of very high memory pressure. So just do that. Reviewed-by:
-
Tom Rix authored
A small code simplification, move the default value of transid to its initialization and remove the else-statement. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
-
Qu Wenruo authored
[PROBLEM] When relocation fails (mostly due to checksum mismatch), we only got very cryptic error messages like: BTRFS info (device dm-4): relocating block group 13631488 flags data BTRFS warning (device dm-4): csum failed root -9 ino 257 off 0 csum 0x373e1ae3 expected csum 0x98757625 mirror 1 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS info (device dm-4): balance: ended with status: -5 The end user has to decipher the above messages and use various tools to locate the affected files and find a way to fix the problem (mostly deleting the file). This is not an easy work even for experienced developer, not to mention the end users. [SCRUB IS DOING BETTER] By contrast, scrub is providing much better error messages: BTRFS error (device dm-4): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488 BTRFS warning (device dm-4): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file) BTRFS info (device dm-4): scrub: finished on devid 1 with status: 0 Which provides the affected files directly to the end user. [IMPROVEMENT] Instead of the generic data checksum error messages, which is not doing a good job for data reloc inodes, this patch introduce a scrub like backref walking based solution. When a sector fails its checksum for data reloc inode, we go the following workflow: - Get the real logical bytenr For data reloc inode, the file offset is the offset inside the block group. Thus the real logical bytenr is @file_off + @block_group->start. - Do an extent type check If it's tree blocks it's much easier to handle, just go through all the tree block backref. - Do a backref walk and inode path resolution for data extents This is mostly the same as scrub. But unfortunately we can not reuse the same function as the output format is different. Now the new output would be more user friendly: BTRFS info (device dm-4): relocating block group 13631488 flags data BTRFS warning (device dm-4): csum failed root -9 ino 257 off 0 logical 13631488 csum 0x373e1ae3 expected csum 0x98757625 mirror 1 BTRFS warning (device dm-4): checksum error at logical 13631488 mirror 1 root 5 inode 257 offset 0 length 4096 links 1 (path: file) BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 2, gen 0 BTRFS info (device dm-4): balance: ended with status: -5 Reviewed-by:
-
Christoph Hellwig authored
Now that btrfs_wq_submit_bio is never called for synchronous I/O, the hipri_workers workqueue is not used anymore and can be removed. Reviewed-by:
Chris Mason <clm@fb.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Christoph Hellwig authored
The writeback_control structure already passes down the information about a writeback being synchronous from the core VM code, and thus information is propagated into the bio REQ_SYNC flag through the wbc_to_write_flags helper. Use that information to decide if checksums calculation is offloaded to a workqueue instead of btrfs_inode::sync_writers field that not only bloats the inode but also has too wide scope, being inode wide instead of limited to the actual writeback request. The sync writes were set in: - btrfs_do_write_iter - regular IO, sync status is set - start_ordered_ops - ordered write start, writeback with WB_SYNC_ALL mode - btrfs_write_marked_extents - write marked extents, writeback with WB_SYNC_ALL mode Reviewed-by:
-
Christoph Hellwig authored
Most modern hardware supports very fast accelerated crc32c calculation. If that is supported the CPU overhead of the checksum calculation is very limited, and offloading the calculation to special worker threads has a lot of overhead for no gain. E.g. on an Intel Optane device is actually very much slows down even 1M buffered writes with fio: Unpatched: write: IOPS=3316, BW=3316MiB/s (3477MB/s)(200GiB/61757msec); 0 zone resets With synchronous CRCs: write: IOPS=4882, BW=4882MiB/s (5119MB/s)(200GiB/41948msec); 0 zone resets With a lot of variation during the unpatched run going down as low as 1100MB/s, while the synchronous CRC version has about the same peak write speed but much lower dips, and fewer kworkers churning around. Both tests had fio saturated at 100% CPU. (thanks to Jens Axboe via Chris Mason for the benchmarking) Reviewed-by:
-
Anand Jain authored
Using SECTOR_SHIFT to convert LBA to physical address makes it more readable. Signed-off-by:
-
Anand Jain authored
Use SECTOR_SHIFT while converting a physical address to an LBA, makes it more readable. Signed-off-by:
-
Qu Wenruo authored
Improve the leaf dump behavior by: - Always dump the leaf first, then the error message - Output the slot number if possible Especially in __btrfs_free_extent() the leaf dump of extent tree can be pretty large. With an extra slot number it's much easier to locate the problem. Signed-off-by:
-
Qu Wenruo authored
Since print-tree infrastructure only prints the content of a tree block, we can make them to accept const extent buffer pointer. This removes a forced type convert in extent-tree, where we convert a const extent buffer pointer to regular one, just to avoid compiler warning. Signed-off-by:
-
Naohiro Aota authored
bitmap_test_range_all_{set,zero} defined in subpage.c are useful for other components. Move them to misc.h and use them in zoned.c. Also, as find_next{,_zero}_bit take/return "unsigned long" instead of "unsigned int", convert the type to "unsigned long". While at it, also rewrite the "if (...) return true; else return false;" pattern and add const to the input bitmap. Signed-off-by:Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
-
Filipe Manana authored
When checking siblings keys, before moving keys from one node/leaf to a sibling node/leaf, it's very unexpected to have the last key of the left sibling greater than or equals to the first key of the right sibling, as that means we have a (serious) corruption that breaks the key ordering properties of a b+tree. Since this is unexpected, surround the comparison with the unlikely macro, which helps the compiler generate better code for the most expected case (no existing b+tree corruption). This is also what we do for other unexpected cases of invalid key ordering (like at btrfs_set_item_key_safe()). Reviewed-by:
-
Filipe Manana authored
The function btrfs_free_device() is never used outside of volumes.c, so make it static and remove its prototype declaration at volumes.h. Reviewed-by:
-
Sweet Tea Dorminy authored
Recently a Meta-internal workload encountered subvolume creation taking up to 2s each, significantly slower than directory creation. As they were hoping to be able to use subvolumes instead of directories, and were looking to create hundreds, this was a significant issue. After Josef investigated, it turned out to be due to the transaction commit currently performed at the end of subvolume creation. This change improves the workload by not doing transaction commit for every subvolume creation, and merely requiring a transaction commit on fsync. In the worst case, of doing a subvolume create and fsync in a loop, this should require an equal amount of time to the current scheme; and in the best case, the internal workload creating hundreds of subvolumes before fsyncing is greatly improved. While it would be nice to be able to use the log tree and use the normal fsync path, log tree replay can't deal with new subvolume inodes presently. It's possible that there's some reason that the transaction commit is necessary for correctness during subvolume creation; however, git logs indicate that the commit dates back to the beginning of subvolume creation, and there are no notes on why it would be necessary. Reviewed-by:
Neal Gompa <neal@gompa.dev> Signed-off-by:
Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by:
-
Filipe Manana authored
btrfs_prev_leaf() is not used outside ctree.c, so there's no need to export it at ctree.h - just make it static at ctree.c and move its definition above btrfs_search_slot_for_read(), since that function calls it. Reviewed-by:
-
- 18 Jun, 2023 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers: three fairly obvious small ones and a large one in aacraid to add block queue completion mapping and fix a CPU offline hang" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path scsi: target: core: Fix error path in target_setup_session() scsi: storvsc: Always set no_report_opcodes scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: - Avoid deadlocks on resume from sleep by delaying scsi rescan until the scsi device is also fully resumed. * tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-scsi: Avoid deadlock on rescan after device resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fix from Helge Deller: - Drop redundant register definitions to fix build with latest binutils * tag 'parisc-for-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Delete redundant register definitions in <asm/assembly.h>
-
