- 24 Mar, 2011 27 commits
-
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Joel Becker <joel.becker@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations to the big-endian architectures which do not have native little-endian bit operations and the little-endian architectures. (alpha, avr32, blackfin, cris, frv, h8300, ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa) These architectures can just include generic implementation (asm-generic/bitops/le.h). Signed-off-by:
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by:
"H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations. The ext2 bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Akinobu Mita authored
This introduces CONFIG_GENERIC_FIND_BIT_LE to tell whether to use generic implementation of find_*_bit_le() in lib/find_next_bit.c or not. For now we select CONFIG_GENERIC_FIND_BIT_LE for all architectures which enable CONFIG_GENERIC_FIND_NEXT_BIT. But m68knommu wants to define own faster find_next_zero_bit_le() and continues using generic find_next_{,zero_}bit(). (CONFIG_GENERIC_FIND_NEXT_BIT and !CONFIG_GENERIC_FIND_BIT_LE) Signed-off-by: -
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations and changing find_*_bit_le() to take a "void *". The ext2 bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations. The ext2 and minix bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations. The ext2 bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming existing powerpc native little-endian bit operations and changing them to take any pointer types. Signed-off-by:
-
Akinobu Mita authored
This makes the little-endian bitops take any pointer types by changing the prototypes and adding casts in the preprocessor macros. That would seem to at least make all the filesystem code happier, and they can continue to do just something like #define ext2_set_bit __test_and_set_bit_le (or whatever the exact sequence ends up being). Signed-off-by:
-
Akinobu Mita authored
As a preparation for providing little-endian bitops for all architectures, This renames generic implementation of little-endian bitops. (remove "generic_" prefix and postfix "_le") s/generic_find_next_le_bit/find_next_bit_le/ s/generic_find_next_zero_le_bit/find_next_zero_bit_le/ s/generic_find_first_zero_le_bit/find_first_zero_bit_le/ s/generic___test_and_set_le_bit/__test_and_set_bit_le/ s/generic___test_and_clear_le_bit/__test_and_clear_bit_le/ s/generic_test_le_bit/test_bit_le/ s/generic___set_le_bit/__set_bit_le/ s/generic___clear_le_bit/__clear_bit_le/ s/generic_test_and_set_le_bit/test_and_set_bit_le/ s/generic_test_and_clear_le_bit/test_and_clear_bit_le/ Signed-off-by:
-
Akinobu Mita authored
This patch series introduces little-endian bit operations in asm/bitops.h for all architectures and converts all ext2 non-atomic and minix bit operations to use little-endian bit operations. It enables us to remove ext2 non-atomic and minix bit operations from asm/bitops.h. The reason they should be removed from asm/bitops.h is as follows: For ext2 non-atomic bit operations, they are used for little-endian byte order bitmap access by some filesystems and modules. But using ext2_*() functions on a module other than ext2 filesystem makes some feel strange. For minix bit operations, they are only used by minix filesystem and are useless by other modules. Because byte order of inode and block bitmap is This patch: In order to make the forthcoming changes smaller, this merges macro definisions in asm-generic/bitops/le.h for big-endian and little-endian as much as possible. This also removes unused BITOP_WORD macro. Signed-off-by:
-
Akinobu Mita authored
asm-generic/bitops/le.h is only intended to be included directly from asm-generic/bitops/ext2-non-atomic.h or asm-generic/bitops/minix-le.h which implements generic ext2 or minix bit operations. This stops including asm-generic/bitops/le.h directly and use ext2 non-atomic bit operations instead. It seems odd to use ext2_*_bit() on rds, but it will replaced with __{set,clear,test}_bit_le() after introducing little endian bit operations for all architectures. This indirect step is necessary to maintain bisectability for some architectures which have their own little-endian bit operations. Signed-off-by: -
Akinobu Mita authored
asm-generic/bitops/le.h is only intended to be included directly from asm-generic/bitops/ext2-non-atomic.h or asm-generic/bitops/minix-le.h which implements generic ext2 or minix bit operations. This stops including asm-generic/bitops/le.h directly and use ext2 non-atomic bit operations instead. It seems odd to use ext2_set_bit() on kvm, but it will replaced with __set_bit_le() after introducing little endian bit operations for all architectures. This indirect step is necessary to maintain bisectability for some architectures which have their own little-endian bit operations. Signed-off-by:
-
Andrew Morton authored
fs/adfs/adfs.h: In function 'append_filetype_suffix': fs/adfs/adfs.h:115: warning: comparison is always false due to limited range of data type Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stuart Swales <stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Luck, Tony authored
In commit 504f52b5 mm: NUMA aware alloc_task_struct_node() Eric Dumazet forgot a "\". Add it. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Chris Wilson authored
This reverts commit a7a75c8f. There are two different variations on how Intel hardware addresses the "Hardware Status Page". One as a location in physical memory and the other as an offset into the virtual memory of the GPU, used in more recent chipsets. (The HWS itself is a cacheable region of memory which the GPU can write to without requiring CPU synchronisation, used for updating various details of hardware state, such as the position of the GPU head in the ringbuffer, the last breadcrumb seqno, etc). These two types of addresses were updated in different locations of code - one inline with the ringbuffer initialisation, and the other during device initialisation. (The HWS page is logically associated with the rings, and there is one HWS page per ring.) During resume, only the ringbuffers were being re-initialised along with the virtual HWS page, leaving the older physical address HWS untouched. This then caused a hang on the older gen3/4 (915GM, 945GM, 965GM) the first time we tried to synchronise the GPU as the breadcrumbs were never being updated. Reported-and-tested-by:
Jan Niehusmann <jan@gondor.com> Reported-by:
Justin P. Mattock <justinmattock@gmail.com> Reported-and-tested-by:
Michael "brot" Groh <brot@minad.de> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 23 Mar, 2011 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Realtek: Avoid unnecessary volume control index on Surround/Side ASoC: Support !REGULATOR build for sgtl5000 ALSA: hda - VIA: Fix VT1708 can't build up Headphone control issue ALSA: hda - VIA: Correct stream names for VT1818S ALSA: hda - VIA: Fix codec type for VT1708BCE at the right timing ALSA: hda - VIA: Fix invalid A-A path volume adjust issue ALSA: hda - VIA: Add missing support for VT1718S in A-A path ALSA: hda - VIA: Fix independent headphone no sound issue ALSA: hda - VIA: Fix stereo mixer recording no sound issue ALSA: hda - Set EAPD for Realtek ALC665 ALSA: usb - Remove trailing spaces from USB card name strings sound: read i_size with i_size_read() ASoC: Remove bogus check for register validity in debugfs write ASoC: mini2440: Fix uda134x codec problem.
-
Cesar Eduardo Barros authored
A conflict between 52c50567 ("mm: swap: unlock swapfile inode mutex before closing file on bad swapfiles") and 83ef99be ("sys_swapon: remove did_down variable") caused a double unlock of the inode mutex (once in bad_swap: before the filp_close, once at the end just before returning). The patch which added the extra unlock cleared did_down to avoid unlocking twice, but the other patch removed the did_down variable. To fix, set inode to NULL after the first unlock, since it will be used after that point only for the final unlock. While checking this patch, I found a path which could unlock without locking, in case the same inode was added as a swapfile twice. To fix, move the setting of the inode variable further down, to just before claim_swapfile, which will lock the inode before doing anything else. Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Eric B Munson <emunson@mgebm.net> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by:
-
Heiko Carstens authored
Commit 34db18a0 ("smp: move smp setup functions to kernel/smp.c") causes this build error on s390 because of a missing init.h include: CC arch/s390/kernel/asm-offsets.s In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/spinlock.h:14:0, from include/linux/spinlock.h:87, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:57, from arch/s390/kernel/asm-offsets.c:10: include/linux/smp.h:117:20: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'setup_nr_cpu_ids' include/linux/smp.h:118:20: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'smp_init' Fix it by adding the include statement. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
WANG Cong <amwang@redhat.com> Signed-off-by:
-
Takashi Iwai authored
-
David Henningsson authored
Similar to commit 7e59e097, this patch avoids unnecessary volume control indices for more Realtek auto-parsers, e g the ALC66x family, on the "Surround" and "Side" controls. These indices cause these volume controls to be ignored by PulseAudio and vmaster and should be removed whenever possible. Cc: stable@kernel.org Reported-by:
Jan Losinski <losinski@wh2.tu-dresden.de> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits) avr32: at32ap700x: fix typo in DMA master configuration dmaengine/dmatest: Pass timeout via module params dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs fsldma: make halt behave nicely on all supported controllers fsldma: reduce locking during descriptor cleanup fsldma: support async_tx dependencies and automatic unmapping fsldma: fix controller lockups fsldma: minor codingstyle and consistency fixes fsldma: improve link descriptor debugging fsldma: use channel name in printk output fsldma: move related helper functions near each other dmatest: fix automatic buffer unmap type drivers, pch_dma: Fix warning when CONFIG_PM=n. dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize dw_dmac: Setting Default Burst length for transfers as 16. dw_dmac: Allow src/dst msize & flow controller to be configured at runtime dw_dmac: Changing type of src_master and dest_master to u8. dw_dmac: Pass Channel Priority from platform_data dw_dmac: Pass Channel Allocation Order from platform_data ...
-
Jean Delvare authored
I'm not sure why the read-only data section is excluded from the report, it seems as relevant as the other data sections (b and d). I've stripped the symbols starting with __mod_ as they can have their names dynamically generated and thus comparison between binaries is not possible. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Andi Kleen <andi@firstfloor.org> Acked-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
-
Jim Keniston authored
Instead of always creating a huge (268K) deflate_workspace with the maximum compression parameters (windowBits=15, memLevel=8), allow the caller to obtain a smaller workspace by specifying smaller parameter values. For example, when capturing oops and panic reports to a medium with limited capacity, such as NVRAM, compression may be the only way to capture the whole report. In this case, a small workspace (24K works fine) is a win, whether you allocate the workspace when you need it (i.e., during an oops or panic) or at boot time. I've verified that this patch works with all accepted values of windowBits (positive and negative), memLevel, and compression level. Signed-off-by:
Jim Keniston <jkenisto@us.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Miller <davem@davemloft.net> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by:
-
Andrey Vagin authored
d_alloc_name return NULL in case error, but we expect errno in devpts_pty_new. Addresses http://bugzilla.openvz.org/show_bug.cgi?id=1758Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
-
Roland Dreier authored
The test program below will hang because io_getevents() uses add_wait_queue_exclusive(), which means the wake_up() in io_destroy() only wakes up one of the threads. Fix this by using wake_up_all() in the aio code paths where we want to make sure no one gets stuck. // t.c -- compile with gcc -lpthread -laio t.c #include <libaio.h> #include <pthread.h> #include <stdio.h> #include <unistd.h> static const int nthr = 2; void *getev(void *ctx) { struct io_event ev; io_getevents(ctx, 1, 1, &ev, NULL); printf("io_getevents returned\n"); return NULL; } int main(int argc, char *argv[]) { io_context_t ctx = 0; pthread_t thread[nthr]; int i; io_setup(1024, &ctx); for (i = 0; i < nthr; ++i) pthread_create(&thread[i], NULL, getev, ctx); sleep(1); io_destroy(ctx); for (i = 0; i < nthr; ++i) pthread_join(thread[i], NULL); return 0; } Signed-off-by:Roland Dreier <roland@purestorage.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Alexander Gordeev authored
Remove code enabled only when CONFIG_PREEMPT_RT is turned on because it is not used in the vanilla kernel. Signed-off-by:
Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: john stultz <johnstul@us.ibm.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by:
-
Stuart Swales authored
ADFS (FileCore) storage complies with the RISC OS filetype specification (12 bits of file type information is stored in the file load address, rather than using a file extension). The existing driver largely ignores this information and does not present it to the end user. It is desirable that stored filetypes be made visible to the end user to facilitate a precise copy of data and metadata from a hard disc (or image thereof) into a RISC OS emulator (such as RPCEmu) or to a network share which can be accessed by real Acorn systems. This patch implements a per-mount filetype suffix option (use -o ftsuffix=1) to present any filetype as a ,xyz hexadecimal suffix on each file. This type suffix is compatible with that used by RISC OS systems that access network servers using NFS client software and by RPCemu's host filing system. Signed-off-by:
Stuart Swales <stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Stuart Swales authored
ADFS (FileCore) storage complies with the RISC OS timestamp specification (40-bit centiseconds since 01 Jan 1900 00:00:00). It is desirable that stored timestamp precision be maintained to facilitate a precise copy of data and metadata from a hard disc (or image thereof) into a RISC OS emulator (such as RPCEmu). This patch implements a full-precision conversion from ADFS to Unix timestamp as the existing driver, for ease of calculation with old 32-bit compilers, uses the common trick of shifting the 40-bits representing centiseconds around into 32-bits representing seconds thereby losing precision. Signed-off-by: Stuart Swales<stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
