There were various issues related to the limited size of integers used in
the verifier:
 - `off + size` overflow in __check_map_access()
 - `off + reg->off` overflow in check_mem_access()
 - `off + reg->var_off.value` overflow or 32-bit truncation of
   `reg->var_off.value` in check_mem_access()
 - 32-bit truncation in check_stack_boundary()

Make sure that any integer math cannot overflow by not allowing
pointer math with large values.

Also reduce the scope of "scalar op scalar" tracking.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This could be made safe by passing through a reference to env and checking
for env->allow_ptr_leaks, but it would only work one way and is probably
not worth the hassle - not doing it will not directly lead to program
rejection.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Force strict alignment checks for stack pointers because the tracking of
stack spills relies on it; unaligned stack accesses can lead to corruption
of spilled registers, which is exploitable.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Prevent indirect stack accesses at non-constant addresses, which would
permit reading and corrupting spilled pointers.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

32-bit ALU ops operate on 32-bit values and have 32-bit outputs.
Adjust the verifier accordingly.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Properly handle register truncation to a smaller size.

The old code first mirrors the clearing of the high 32 bits in the bitwise
tristate representation, which is correct. But then, it computes the new
arithmetic bounds as the intersection between the old arithmetic bounds and
the bounds resulting from the bitwise tristate representation. Therefore,
when coerce_reg_to_32() is called on a number with bounds
[0xffff'fff8, 0x1'0000'0007], the verifier computes
[0xffff'fff8, 0xffff'ffff] as bounds of the truncated number.
This is incorrect: The truncated number could also be in the range [0, 7],
and no meaningful arithmetic bounds can be computed in that case apart from
the obvious [0, 0xffff'ffff].

Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.

Debian assigned CVE-2017-16996 for this issue.

v2:
 - flip the mask during arithmetic bounds calculation (Ben Hutchings)
v3:
 - add CVE number (Ben Hutchings)

Fixes: b03c9f9f ("bpf/verifier: track signed and unsigned min/max values")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Distinguish between
BPF_ALU64|BPF_MOV|BPF_K (load 32-bit immediate, sign-extended to 64-bit)
and BPF_ALU|BPF_MOV|BPF_K (load 32-bit immediate, zero-padded to 64-bit);
only perform sign extension in the first case.

Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.

Debian assigned CVE-2017-16995 for this issue.

v3:
 - add CVE number (Ben Hutchings)

Fixes: 48461135 ("bpf: allow access into map value arrays")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Incorrect signed bounds were being computed.
If the old upper signed bound was positive and the old lower signed bound was
negative, this could cause the new upper signed bound to be too low,
leading to security issues.

Fixes: b03c9f9f ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[jannh@google.com: changed description to reflect bug impact]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

I'm getting various build failures on sparc64.  The key is
usually that the userland tools get built 32-bit.

1) clock_gettime() is in librt, so that must be added to the link
   libraries.

2) "sizeof(x)" must be printed with "%Z" printf prefix.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

With 720f228e ("bpf: fix broken BPF selftest build") the
inclusion of arch-specific header files changed.  Including the
asm/bpf_perf_event.h on s390, correctly includes the s390 specific
header file.  This header file tries then to include the s390
asm/ptrace.h and the build fails with:

cc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../../include/generated  -I../../../include    test_verifier.c
+/root/git/linux/tools/testing/selftests/bpf/libbpf.a /root/git/linux/tools/testing/selftests/bpf/cgroup_helpers.c -lcap -lelf -o
+/root/git/linux/tools/testing/selftests/bpf/test_verifier
In file included from ../../../include/uapi/asm/bpf_perf_event.h:4:0,
                 from ../../../include/uapi/linux/bpf_perf_event.h:11,
                 from test_verifier.c:29:
../../../include/uapi/../../arch/s390/include/uapi/asm/bpf_perf_event.h:7:9: error: unknown type name 'user_pt_regs'
 typedef user_pt_regs bpf_user_pt_regs_t;
         ^~~~~~~~~~~~
make: *** [../lib.mk:109: /root/git/linux/tools/testing/selftests/bpf/test_verifier] Error 1

This is caused by a recent update to the s390 asm/ptrace.h file
that is not (yet) available in the local installation.  That means,
the s390 asm/ptrace.h must be included from the tools/arch/s390
directory.

Because there is no proper framework to deal with asm specific
includes in tools/, slightly modify the s390 asm/bpf_perf_event.h
to include the local ptrace.h header file.

See also discussion on
https://marc.info/?l=linux-s390&m=151359424420691&w=2

Please note that this needs to be preserved until tools/ is able to
correctly handle asm specific headers.

References: https://marc.info/?l=linux-s390&m=151359424420691&w=2
Fixes: 720f228e ("bpf: fix broken BPF selftest build")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There are several error paths in xgene_mdio_probe(),
where clk is left undisabled. The patch fixes them.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Observed on the 88e1512 in SGMII-to-Copper mode, negotiating pause
is unreliable.  While the pause bits can be set in the advertisment
register, they clear shortly after negotiation with a link partner
commences irrespective of the cause of the negotiation.

While these bits may be correctly conveyed to the link partner on the
first negotiation, a subsequent negotiation (eg, due to negotiation
restart by the link partner, or reconnection of the cable) will result
in the link partner seeing these bits as zero, while the kernel
believes that it has advertised pause modes.

This leads to the local kernel evaluating (eg) symmetric pause mode,
while the remote end evaluates that we have no pause mode capability.

Since we can't guarantee the advertisment, disable pause mode support
with this PHY when used in SGMII-to-Copper mode.

The 88e1510 in RGMII-to-Copper mode appears to behave correctly.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The early call to br_stp_change_bridge_id in bridge's newlink can cause
a memory leak if an error occurs during the newlink because the fdb
entries are not cleaned up if a different lladdr was specified, also
another minor issue is that it generates fdb notifications with
ifindex = 0. Another unrelated memory leak is the bridge sysfs entries
which get added on NETDEV_REGISTER event, but are not cleaned up in the
newlink error path. To remove this special case the call to
br_stp_change_bridge_id is done after netdev register and we cleanup the
bridge on changelink error via br_dev_delete to plug all leaks.

This patch makes netlink bridge destruction on newlink error the same as
dellink and ioctl del which is necessary since at that point we have a
fully initialized bridge device.

To reproduce the issue:
$ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1
RTNETLINK answers: Invalid argument

$ rmmod bridge
[ 1822.142525] =============================================================================
[ 1822.143640] BUG bridge_fdb_cache (Tainted: G           O    ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown()
[ 1822.144821] -----------------------------------------------------------------------------

[ 1822.145990] Disabling lock debugging due to kernel taint
[ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100
[ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G    B      O     4.15.0-rc2+ #87
[ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 1822.150008] Call Trace:
[ 1822.150510]  dump_stack+0x78/0xa9
[ 1822.151156]  slab_err+0xb1/0xd3
[ 1822.151834]  ? __kmalloc+0x1bb/0x1ce
[ 1822.152546]  __kmem_cache_shutdown+0x151/0x28b
[ 1822.153395]  shutdown_cache+0x13/0x144
[ 1822.154126]  kmem_cache_destroy+0x1c0/0x1fb
[ 1822.154669]  SyS_delete_module+0x194/0x244
[ 1822.155199]  ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 1822.155773]  entry_SYSCALL_64_fastpath+0x23/0x9a
[ 1822.156343] RIP: 0033:0x7f929bd38b17
[ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0
[ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17
[ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0
[ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11
[ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80
[ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090
[ 1822.161278] INFO: Object 0x000000007645de29 @offset=0
[ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128

Fixes: 30313a3d ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device")
Fixes: 5b8d5429 ("bridge: netlink: register netdevice before executing changelink")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever a new type of chunk is added, the corresp conversion in
sctp_cname should be added. Otherwise, in some places, pr_debug
will print it as "unknown chunk".

Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now when reneging events in sctp_ulpq_renege(), the variable freed
could be increased by a __u16 value twice while freed is of __u16
type. It means freed may overflow at the second addition.

This patch is to fix it by using __u32 type for 'freed', while at
it, also to remove 'if (chunk)' check, as all renege commands are
generated in sctp_eat_data and it can't be NULL.
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the order of mac_up and sgmii_open for the
reasons noted below:

- If open takes more time(if the SGMII block is not responding or
  if we want to do some delay based task) in this situation we
  will hit NETDEV watchdog
- The main reason : We should signal to upper layers that we are
  ready to receive packets "only" when the entire path is initialized
  not the other way around, this is followed in the reset path where
  we do mac_down, sgmii_reset and mac_up. This also makes the driver
  uniform across the reset and open paths.
- In the future there may be need for delay based tasks to be done in
  sgmii open which will result in NETDEV watchdog
- As per the documentation the order of init should be sgmii, mac, rings
  and DMA
Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

88E1145 also need this autoneg errata.

Fixes: f2899788 ("net: phy: marvell: Limit errata to 88m1101")
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A group member going into state LEAVING should never go back to any
other state before it is finally deleted. However, this might happen
if the socket needs to send out a RECLAIM message during this interval.
Since we forget to remove the leaving member from the group's 'active'
or 'pending' list, the member might be selected for reclaiming, change
state to RECLAIMING, and get stuck in this state instead of being
deleted. This might lead to suppression of the expected 'member down'
event to the receiver.

We fix this by removing the member from all lists, except the RB tree,
at the moment it goes into state LEAVING.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Group messages are not supposed to be returned to sender when the
destination socket disappears. This is done correctly for regular
traffic messages, by setting the 'dest_droppable' bit in the header.
But we forget to do that in group protocol messages. This has the effect
that such messages may sometimes bounce back to the sender, be perceived
as a legitimate peer message, and wreak general havoc for the rest of
the session. In particular, we have seen that a member in state LEAVING
may go back to state RECLAIMED or REMITTED, hence causing suppression
of an otherwise expected 'member down' event to the user.

We fix this by setting the 'dest_droppable' bit even in group protocol
messages.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2017-12-17

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a corner case in generic XDP where we have non-linear skbs
   but enough tailroom in the skb to not miss to linearizing there,
   from Song.

2) Fix BPF JIT bugs in s390x and ppc64 to not recache skb data when
   BPF context is not skb, from Daniel.

3) Fix a BPF JIT bug in sparc64 where recaching skb data after helper
   call would use the wrong register for the skb, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Stefano Brivio says:
    Commit a985343b ("vxlan: refactor verification and
    application of configuration") introduced a change in the
    behaviour of initial MTU setting: earlier, the MTU for a link
    created on top of a given lower device, without an initial MTU
    specification, was set to the MTU of the lower device minus
    headroom as a result of this path in vxlan_dev_configure():

	if (!conf->mtu)
		dev->mtu = lowerdev->mtu -
			   (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM);

    which is now gone. Now, the initial MTU, in absence of a
    configured value, is simply set by ether_setup() to ETH_DATA_LEN
    (1500 bytes).

    This breaks userspace expectations in case the MTU of
    the lower device is higher than 1500 bytes minus headroom.

This patch restores the previous behaviour on newlink operation. Since
max_mtu can be negative and we update dev->mtu directly, also check it
for valid minimum.
Reported-by: Junhan Yan <juyan@redhat.com>
Fixes: a985343b ("vxlan: refactor verification and application of configuration")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One example of when an ICMPv6 packet is required to be looped back is
when a host acts as both a Multicast Listener and a Multicast Router.

A Multicast Router will listen on address ff02::16 for MLDv2 messages.

Currently, MLDv2 messages originating from a Multicast Listener running
on the same host as the Multicast Router are not being delivered to the
Multicast Router. This is due to dst.input being assigned the default
value of dst_discard.

This results in the packet being looped back but discarded before being
delivered to the Multicast Router.

This patch sets dst.input to ip6_input to ensure a looped back packet
is delivered to the Multicast Router.
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull rdma fixes from Jason Gunthorpe:
 "More fixes from testing done on the rc kernel, including more SELinux
  testing. Looking forward, lockdep found regression today in ipoib
  which is still being fixed.

  Summary:

   - Fix for SELinux on the umad SMI path. Some old hardware does not
     fill the PKey properly exposing another bug in the newer SELinux
     code.

   - Check the input port as we can exceed array bounds from this user
     supplied value

   - Users are unable to use the hash field support as they want due to
     incorrect checks on the field restrictions, correct that so the
     feature works as intended

   - User triggerable oops in the NETLINK_RDMA handler

   - cxgb4 driver fix for a bad interaction with CQ flushing in iser
     caused by patches in this merge window, and bad CQ flushing during
     normal close.

   - Unbalanced memalloc_noio in ipoib in an error path"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/ipoib: Restore MM behavior in case of tx_ring allocation failure
  iw_cxgb4: only insert drain cqes if wq is flushed
  iw_cxgb4: only clear the ARMED bit if a notification is needed
  RDMA/netlink: Fix general protection fault
  IB/mlx4: Fix RSS hash fields restrictions
  IB/core: Don't enforce PKey security on SMI MADs
  IB/core: Bound check alternate path port number

Pull i2c fixes from Wolfram Sang:
 "Two bugfixes for the AT24 I2C eeprom driver and some minor corrections
  for I2C bus drivers"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: Fix port number check on release
  i2c: stm32: Fix copyrights
  i2c-cht-wc: constify platform_device_id
  eeprom: at24: change nvmem stride to 1
  eeprom: at24: fix I2C device selection for runtime PM

Pull NFS client fixes from Anna Schumaker:
 "This has two stable bugfixes, one to fix a BUG_ON() when
  nfs_commit_inode() is called with no outstanding commit requests and
  another to fix a race in the SUNRPC receive codepath.

  Additionally, there are also fixes for an NFS client deadlock and an
  xprtrdma performance regression.

  Summary:

  Stable bugfixes:
   - NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
     commit in the case that there were no commit requests.
   - SUNRPC: Fix a race in the receive code path

  Other fixes:
   - NFS: Fix a deadlock in nfs client initialization
   - xprtrdma: Fix a performance regression for small IOs"

* tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Fix a race in the receive code path
  nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
  xprtrdma: Spread reply processing over more CPUs
  nfs: fix a deadlock in nfs client initialization

This reverts commits 5c9d2d5c, c7da82b8, and e7fe7b5c.

We'll probably need to revisit this, but basically we should not
complicate the get_user_pages_fast() case, and checking the actual page
table protection key bits will require more care anyway, since the
protection keys depend on the exact state of the VM in question.

Particularly when doing a "remote" page lookup (ie in somebody elses VM,
not your own), you need to be much more careful than this was.  Dave
Hansen says:

 "So, the underlying bug here is that we now a get_user_pages_remote()
  and then go ahead and do the p*_access_permitted() checks against the
  current PKRU. This was introduced recently with the addition of the
  new p??_access_permitted() calls.

  We have checks in the VMA path for the "remote" gups and we avoid
  consulting PKRU for them. This got missed in the pkeys selftests
  because I did a ptrace read, but not a *write*. I also didn't
  explicitly test it against something where a COW needed to be done"

It's also not entirely clear that it makes sense to check the protection
key bits at this level at all.  But one possible eventual solution is to
make the get_user_pages_fast() case just abort if it sees protection key
bits set, which makes us fall back to the regular get_user_pages() case,
which then has a vma and can do the check there if we want to.

We'll see.

Somewhat related to this all: what we _do_ want to do some day is to
check the PAGE_USER bit - it should obviously always be set for user
pages, but it would be a good check to have back.  Because we have no
generic way to test for it, we lost it as part of moving over from the
architecture-specific x86 GUP implementation to the generic one in
commit e585513b ("x86/mm/gup: Switch GUP to the generic
get_user_page_fast() implementation").

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Clamp timeouts to INT_MAX in conntrack, from Jay Elliot.

 2) Fix broken UAPI for BPF_PROG_TYPE_PERF_EVENT, from Hendrik
    Brueckner.

 3) Fix locking in ieee80211_sta_tear_down_BA_sessions, from Johannes
    Berg.

 4) Add missing barriers to ptr_ring, from Michael S. Tsirkin.

 5) Don't advertise gigabit in sh_eth when not available, from Thomas
    Petazzoni.

 6) Check network namespace when delivering to netlink taps, from Kevin
    Cernekee.

 7) Kill a race in raw_sendmsg(), from Mohamed Ghannam.

 8) Use correct address in TCP md5 lookups when replying to an incoming
    segment, from Christoph Paasch.

 9) Add schedule points to BPF map alloc/free, from Eric Dumazet.

10) Don't allow silly mtu values to be used in ipv4/ipv6 multicast, also
    from Eric Dumazet.

11) Fix SKB leak in tipc, from Jon Maloy.

12) Disable MAC learning on OVS ports of mlxsw, from Yuval Mintz.

13) SKB leak fix in skB_complete_tx_timestamp(), from Willem de Bruijn.

14) Add some new qmi_wwan device IDs, from Daniele Palmas.

15) Fix static key imbalance in ingress qdisc, from Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  net: qcom/emac: Reduce timeout for mdio read/write
  net: sched: fix static key imbalance in case of ingress/clsact_init error
  net: sched: fix clsact init error path
  ip_gre: fix wrong return value of erspan_rcv
  net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
  pkt_sched: Remove TC_RED_OFFLOADED from uapi
  net: sched: Move to new offload indication in RED
  net: sched: Add TCA_HW_OFFLOAD
  net: aquantia: Increment driver version
  net: aquantia: Fix typo in ethtool statistics names
  net: aquantia: Update hw counters on hw init
  net: aquantia: Improve link state and statistics check interval callback
  net: aquantia: Fill in multicast counter in ndev stats from hardware
  net: aquantia: Fill ndev stat couters from hardware
  net: aquantia: Extend stat counters to 64bit values
  net: aquantia: Fix hardware DMA stream overload on large MRRS
  net: aquantia: Fix actual speed capabilities reporting
  sock: free skb in skb_complete_tx_timestamp on error
  s390/qeth: update takeover IPs after configuration change
  s390/qeth: lock IP table while applying takeover changes
  ...

Pull USB fixes from Greg KH:
 "Here are some USB fixes for 4.15-rc4.

  There is the usual handful gadget/dwc2/dwc3 fixes as always, for
  reported issues. But the most important things in here is the core fix
  from Alan Stern to resolve a nasty security bug (my first attempt is
  reverted, Alan's was much cleaner), as well as a number of usbip fixes
  from Shuah Khan to resolve those reported security issues.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: core: prevent malicious bNumInterfaces overflow
  Revert "USB: core: only clean up what we allocated"
  USB: core: only clean up what we allocated
  Revert "usb: gadget: allow to enable legacy drivers without USB_ETH"
  usb: gadget: webcam: fix V4L2 Kconfig dependency
  usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues
  usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult less than 3
  usb: dwc3: of-simple: set dev_pm_ops
  usb: dwc3: of-simple: fix missing clk_disable_unprepare
  usb: dwc3: gadget: Wait longer for controller to end command processing
  usb: xhci: fix TDS for MTK xHCI1.1
  xhci: Don't add a virt_dev to the devs array before it's fully allocated
  usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
  usbip: prevent vhci_hcd driver from leaking a socket pointer address
  usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
  usbip: fix stub_rx: get_pipe() to validate endpoint number
  tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent gcc with -Werror)
  USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
  usb: musb: da8xx: fix babble condition handling

Pull staging fixes from Greg KH:
 "Here are some small staging driver fixes for 4.15-rc4.

  One patch for the ccree driver to prevent an unitialized value from
  being returned to a caller, and the other fixes a logic error in the
  pi433 driver"

* tag 'staging-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: pi433: Fixes issue with bit shift in rf69_get_modulation
  staging: ccree: Uninitialized return in ssi_ahash_import()

Pull virtio regression fixes from Michael Tsirkin:
 "Fixes two issues in the latest kernel"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_mmio: fix devm cleanup
  ptr_ring: fix up after recent ptr_ring changes

Merge tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - fix a particularly nasty DM core bug in a 4.15 refcount_t conversion.

 - fix various targets to dm_register_target after module __init
   resources created; otherwise racing lvm2 commands could result in a
   NULL pointer during initialization of associated DM kernel module.

 - fix regression in bio-based DM multipath queue_if_no_path handling.

 - fix DM bufio's shrinker to reclaim more than one buffer per scan.

* tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
  dm mpath: fix bio-based multipath queue_if_no_path handling
  dm: fix various targets to dm_register_target after module __init resources created
  dm table: fix regression from improper dm_dev_internal.count refcount_t conversion

Pull SCSI fixes from James Bottomley:
 "The most important one is the bfa fix because it's easy to oops the
  kernel with this driver (this includes the commit that corrects the
  compiler warning in the original), a regression in the new timespec
  conversion in aacraid and a regression in the Fibre Channel ELS
  handling patch.

  The other three are a theoretical problem with termination in the
  vendor/host matching code and a use after free in lpfc.

  The additional patches are a fix for an I/O hang in the mq code under
  certain circumstances and a rare oops in some debugging code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Fix a scsi_show_rq() NULL pointer dereference
  scsi: MAINTAINERS: change FCoE list to linux-scsi
  scsi: libsas: fix length error in sas_smp_handler()
  scsi: bfa: fix type conversion warning
  scsi: core: run queue if SCSI device queue isn't ready and queue is idle
  scsi: scsi_devinfo: cleanly zero-pad devinfo strings
  scsi: scsi_devinfo: handle non-terminated strings
  scsi: bfa: fix access to bfad_im_port_s
  scsi: aacraid: address UBSAN warning regression
  scsi: libfc: fix ELS request handling
  scsi: lpfc: Use after free in lpfc_rq_buf_free()

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC fixes:

   - fix use of uninitialized drv_typ variable

   - apply NO_CMD23 quirk to some specific SD cards to make them work"

* tag 'mmc-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: apply NO_CMD23 quirk to some specific cards
  mmc: core: properly init drv_type

Pull ceph fix from Ilya Dryomov:
 "CephFS inode trimming fix from Zheng, marked for stable"

* tag 'ceph-for-4.15-rc4' of git://github.com/ceph/ceph-client:
  ceph: drop negative child dentries before try pruning inode's alias

Pull overlayfs fixes from Miklos Szeredi:

 - fix incomplete syncing of filesystem

 - fix regression in readdir on ovl over 9p

 - only follow redirects when needed

 - misc fixes and cleanups

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix overlay: warning prefix
  ovl: Use PTR_ERR_OR_ZERO()
  ovl: Sync upper dirty data when syncing overlayfs
  ovl: update ctx->pos on impure dir iteration
  ovl: Pass ovl_get_nlink() parameters in right order
  ovl: don't follow redirects if redirect_dir=off

Currently mdio read/write takes around ~115us as the timeout
between status check is set to 100us.
By reducing the timeout to 1us mdio read/write takes ~15us to
complete. This improves the link up event response.
Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org>
Acked-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arm64 fixes from Will Deacon:
 "There are some significant fixes in here for FP state corruption,
  hardware access/dirty PTE corruption and an erratum workaround for the
  Falkor CPU.

  I'm hoping that things finally settle down now, but never say never...

  Summary:

   - Fix FPSIMD context switch regression introduced in -rc2

   - Fix ABI break with SVE CPUID register reporting

   - Fix use of uninitialised variable

   - Fixes to hardware access/dirty management and sanity checking

   - CPU erratum workaround for Falkor CPUs

   - Fix reporting of writeable+executable mappings

   - Fix signal reporting for RAS errors"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fpsimd: Fix copying of FP state from signal frame into task struct
  arm64/sve: Report SVE to userspace via CPUID only if supported
  arm64: fix CONFIG_DEBUG_WX address reporting
  arm64: fault: avoid send SIGBUS two times
  arm64: hw_breakpoint: Use linux/uaccess.h instead of asm/uaccess.h
  arm64: Add software workaround for Falkor erratum 1041
  arm64: Define cputype macros for Falkor CPU
  arm64: mm: Fix false positives in set_pte_at access/dirty race detection
  arm64: mm: Fix pte_mkclean, pte_mkdirty semantics
  arm64: Initialise high_memory global variable earlier

Move static key increments to the beginning of the init function
so they pair 1:1 with decrements in ingress/clsact_destroy,
which is called in case ingress/clsact_init fails.

Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since in qdisc_create, the destroy op is called when init fails, we
don't do cleanup in init and leave it up to destroy.
This fixes use-after-free when trying to put already freed block.

Fixes: 6e40cf2d ("net: sched: use extended variants of block_get/put in ingress and clsact qdiscs")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - fix the s2ram regression related to confusion around segment
     register restoration, plus related cleanups that make the code more
     robust

   - a guess-unwinder Kconfig dependency fix

   - an isoimage build target fix for certain tool chain combinations

   - instruction decoder opcode map fixes+updates, and the syncing of
     the kernel decoder headers to the objtool headers

   - a kmmio tracing fix

   - two 5-level paging related fixes

   - a topology enumeration fix on certain SMP systems"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
  x86/decoder: Fix and update the opcodes map
  x86/power: Make restore_processor_context() sane
  x86/power/32: Move SYSENTER MSR restoration to fix_processor_context()
  x86/power/64: Use struct desc_ptr for the IDT in struct saved_context
  x86/unwinder/guess: Prevent using CONFIG_UNWINDER_GUESS=y with CONFIG_STACKDEPOT=y
  x86/build: Don't verify mtools configuration file for isoimage
  x86/mm/kmmio: Fix mmiotrace for page unaligned addresses
  x86/boot/compressed/64: Print error if 5-level paging is not supported
  x86/boot/compressed/64: Detect and handle 5-level paging at boot-time
  x86/smpboot: Do not use smp_num_siblings in __max_logical_packages calculation