- 25 Mar, 2019 6 commits
-
-
Maciej Fijalkowski authored
Introduce ice_can_reuse_rx_page which will verify whether the page can be reused and return the boolean result to caller. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Maciej Fijalkowski authored
Introduce ice_get_rx_buf, which will fetch the Rx buffer and do the DMA synchronization. Length of the packet that hardware Rx descriptor contains is now read in ice_clean_rx_irq, so we can feed ice_get_rx_buf with it and resign from rx_desc passed as argument in ice_fetch_rx_buf and ice_add_rx_frag. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Brett Creeley authored
The hardware now supports link events over the admin receive queue (ARQ), so enable HW link events over the ARQ and remove code for link event polling. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alan Brady authored
Someone went through the effort of making this a variable so let's use it instead of recalculating it again. Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Michal Swiatkowski authored
The VLAN rule is lost when VM starts or the AVF driver (iavf.ko) is reloaded. So it is necessary to add this rule again. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Victor Raj authored
When VSI increases the number of queues dynamically, the scheduler just needs to add the new required nodes rather than re-adjusting with previously allocated number of nodes. Readjusting didn't provide enough parents to add the upper layer nodes also can't place lan and rdma subtrees separately. In decrease case, keep the VSI configuration with max number of queues always. This will leave some extra nodes in the tree but no harm done. Signed-off-by: Victor Raj <victor.raj@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 Mar, 2019 34 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== devlink: small spring cleanup Mostly cosmetics and janitor work. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Some drivers are becoming more dependent on NET_DEVLINK being selected in configuration. With upcoming compat functions, the behavior would be wrong in case devlink was not compiled in. So make the drivers select NET_DEVLINK and rely on the functions being there, not just stubs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add spinlock to protect port type and type_dev pointer consistency. Without that, userspace may see inconsistent type and type_dev combinations. Signed-off-by: Jiri Pirko <jiri@mellanox.com> v1->v2: - rebased Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Port needs to be registered first before the type is set. Warn and bail-out in case it is not. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Move the type set of devlink port after it is registered. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Similar to other driver, move the port type set after netdev registration is done. Along with that, clear the type before unregistration. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Since the port attributes are static and cannot change during the port lifetime, WARN_ON if some driver calls it after registration. Also, no need to call notifications as it is noop anyway due to check of devlink_port->registered there. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Since attrs are static during the existence of devlink port, set the before registration of the port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Since attrs are static during the existence of devlink port, set the before registration of the port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
__devlink_port_type_set() returns void, it makes no sense to pass it on, so don't do that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The netdevice is guaranteed to not disappear so we can rely that devlink_port and devlink won't disappear as well. No need to take devlink_mutex so don't take it here. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Call devlink_port_type_eth_set() before devlink_port_register(). Bnxt instances won't change type during lifetime. This avoids one extra userspace devlink notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Set the attrs properly so delink has enough info to generate physical port names. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
devlink functions are in use, so include the related header file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
devlink functions are in use, so include the related header file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add missing called to mutex_destroy() for two mutexes used in devlink code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: RX performance optimization patches Here is a set of patches targeting for performance improvement on various platforms and protocols. Our main target was rx performance on iommu systems, notably NVIDIA Jetson TX2 and NVIDIA Xavier platforms. We introduce page reuse strategy to better deal with iommu dma mapping costs. With it we see 80-90% of page reuse under some test configurations on UDP traffic. This shows good improvements on other systems with IOMMU hardware, like AMD Ryzen. We've also improved TCP LRO configuration parameters, allowing packets to better coalesce. Page reuse tests were carried out using iperf3, iperf2, netperf and pktgen. Mainly on UDP traffic, with various packet lengths. Jetson TX2, UDP, Default MTU: RX Lost Datagrams Before: Max: 69% Min: 68% Avg: 68.5% After: Max: 41% Min: 38% Avg: 39.2% Maximum throughput Before: 1.27 Gbits/sec After: 2.41 Gbits/sec AMD Ryzen 5 2400G, UDP, Default MTU: RX Lost Datagrams Before: Max: 12% Min: 4.5% Avg: 7.17% After: Max: 6.2% Min: 2.3% Avg: 4.26% ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
The driver is now constantly tested in our lab on aarch64 hardware: Jetson tx2, Pascal and Xavier tegra based hardware. Many of tegra smmu related HW bugs were fixed or workarounded already. Thus, add ARM64 into Kconfig. Add also COMPILE_TEST dependency. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikita Danilov authored
Default LRO HW configuration was very conservative. Low Number of Descriptors per LRO Sequence, small session timeout, inefficient settings in interrupt generation logic. Change max number of LRO descriptors from 2 to 16 to increase performance. Increase maximum coalescing interval in HW to 250uS. Tune up HW LRO interrupt generation setting to prevent hw issues with long LRO sessions. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
For multigig rates 1K ring size is often not enough and causes extra packet drops in hardware. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
This correlates with default internet MTU. This also allows page flip/reuse to be activated, since each allocated RX page now serves for two frags/packets. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Before that, we've refilled ring even on single descriptor move. Under high packet load that caused page allocation logic to be triggered too often. That made overall ring processing slower. Moreover, with page buffer reuse implemented, we should give a chance higher networking levels to process received packets faster, release the pages they consumed and therefore give a higher chance for these pages to be reused. RX ring is now refilled only when AQ_CFG_RX_REFILL_THRES or more descriptors were processed (32 by default). Under regular traffic this gives quite enough time for packet to be consumed and page to be reused. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
We introduce internal aq_rxpage wrapper over regular page where extra field is tracked: rxpage offset inside of allocated page. This offset allows to reuse one page for multiple packets. When needed (for example with large frames processing), allocated pageorder could be customized. This gives even larger page reuse efficiency. page_ref_count is used to track page users. If during rx refill underlying page has users, we increase pg_off by rx frame size thus the top half of the page is reused. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Atlantic driver used 14 bytes preallocated skb size. That made L3 protocol processing inefficient because pskb_pull had to fetch all the L3/L4 headers from extra fragments. Specially on UDP flows that caused extra packet drops because CPU was overloaded with pskb_pull. This patch uses eth_get_headlen for skb preallocation. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2019-03-20 This series includes updates to mlx5 driver, 1) Compiler warnings cleanup from Saeed Mahameed 2) Parav Pandit simplifies sriov enable/disables 3) Gustavo A. R. Silva, Removes a redundant assignment 4) Moshe Shemesh, Adds Geneve tunnel stateless offload support 5) Eli Britstein, Adds the Support for VLAN modify action and Replaces TC VLAN pop and push actions with VLAN modify Note: This series includes two simple non-mlx5 patches, 1) Declare IANA_VXLAN_UDP_PORT definition in include/net/vxlan.h, and use it in some drivers. 2) Declare GENEVE_UDP_PORT definition in include/net/geneve.h, and use it in mlx5 and nfp drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-03-22 This series contains updates to ice driver only. Akeem enables MAC anti-spoofing by default when a new VSI is being created. Fixes an issue when reclaiming VF resources back to the pool after reset, by freeing VF resources separately using the first VF vector index to traverse the list, instead of starting at the last assigned vectors list. Added support for VF & PF promiscuous mode in the ice driver. Fixed the PF driver from letting the VF know it is "not trusted" when it attempts to add more than its permitted additional MAC addresses. Altered how the driver gets the VF VSIs instances, instead of using the mailbox messages to retrieve VSIs, get it directly via the VF object in the PF data structure. Bruce fixes return values to resolve static analysis warnings. Made whitespace changes to increase readability and reduce code wrapping. Anirudh cleans up code by removing a function prototype that was never implemented and removed an unused field in the ice_sched_vsi_info structure. Kiran fixes a potential divide by zero issue by adding a check. Victor cleans up the transmit scheduler by adjusting the stack variable usage and added/modified debug prints to make them more useful. Yashaswini updates the driver in VEB mode to ensure that the LAN_EN bit is set if all the right conditions are met. Christopher ensures the loopback enable bit is not set for prune switch rules, since all transmit traffic would be looped back to the internal switch and dropped. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: add rx/tx cache to reduce lock contention On hosts with many cpus we can observe a very serious contention on spinlocks used in mm slab layer. The following can happen quite often : 1) TX path sendmsg() allocates one (fclone) skb on CPU A, sends a clone. ACK is received on CPU B, and consumes the skb that was in the retransmit queue. 2) RX path network driver allocates skb on CPU C recvmsg() happens on CPU D, freeing the skb after it has been delivered to user space. In both cases, we are hitting the asymetric alloc/free pattern for which slab has to drain alien caches. At 8 Mpps per second, this represents 16 Mpps alloc/free per second and has a huge penalty. In an interesting experiment, I tried to use a single kmem_cache for all the skbs (in skb_init() : skbuff_fclone_cache = skbuff_head_cache = kmem_cache_create("skbuff_fclone_cache", sizeof(struct sk_buff_fclones),); qnd most of the contention disappeared, since cpus could better use their local slab per-cpu cache. But we can do actually better, in the following patches. TX : at ACK time, no longer free the skb but put it back in a tcp socket cache, so that next sendmsg() can reuse it immediately. RX : at recvmsg() time, do not free the skb but put it in a tcp socket cache so that it can be freed by the cpu feeding the incoming packets in BH. This increased the performance of small RPC benchmark by about 10 % on a host with 112 hyperthreads. v2 : - Solved a race condition : sk_stream_alloc_skb() to make sure the prior clone has been freed. - Really test rps_needed in sk_eat_skb() as claimed. - Fixed rps_needed use in drivers/net/tun.c v3: Added a #ifdef CONFIG_RPS, to avoid compile error (kbuild robot) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Often times, recvmsg() system calls and BH handling for a particular TCP socket are done on different cpus. This means the incoming skb had to be allocated on a cpu, but freed on another. This incurs a high spinlock contention in slab layer for small rpc, but also a high number of cache line ping pongs for larger packets. A full size GRO packet might use 45 page fragments, meaning that up to 45 put_page() can be involved. More over performing the __kfree_skb() in the recvmsg() context adds a latency for user applications, and increase probability of trapping them in backlog processing, since the BH handler might found the socket owned by the user. This patch, combined with the prior one increases the rpc performance by about 10 % on servers with large number of cores. (tcp_rr workload with 10,000 flows and 112 threads reach 9 Mpps instead of 8 Mpps) This also increases single bulk flow performance on 40Gbit+ links, since in this case there are often two cpus working in tandem : - CPU handling the NIC rx interrupts, feeding the receive queue, and (after this patch) freeing the skbs that were consumed. - CPU in recvmsg() system call, essentially 100 % busy copying out data to user space. Having at most one skb in a per-socket cache has very little risk of memory exhaustion, and since it is protected by socket lock, its management is essentially free. Note that if rps/rfs is used, we do not enable this feature, because there is high chance that the same cpu is handling both the recvmsg() system call and the TCP rx path, but that another cpu did the skb allocations in the device driver right before the RPS/RFS logic. To properly handle this case, it seems we would need to record on which cpu skb was allocated, and use a different channel to give skbs back to this cpu. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
On hosts with a lot of cores, RPC workloads suffer from heavy contention on slab spinlocks. 20.69% [kernel] [k] queued_spin_lock_slowpath 5.64% [kernel] [k] _raw_spin_lock 3.83% [kernel] [k] syscall_return_via_sysret 3.48% [kernel] [k] __entry_text_start 1.76% [kernel] [k] __netif_receive_skb_core 1.64% [kernel] [k] __fget For each sendmsg(), we allocate one skb, and free it at the time ACK packet comes. In many cases, ACK packets are handled by another cpus, and this unfortunately incurs heavy costs for slab layer. This patch uses an extra pointer in socket structure, so that we try to reuse the same skb and avoid these expensive costs. We cache at most one skb per socket so this should be safe as far as memory pressure is concerned. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We prefer static_branch_unlikely() over static_key_false() these days. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Paolo Abeni says: ==================== net: dev: BYPASS for lockless qdisc This patch series is aimed at improving xmit performances of lockless qdisc in the uncontended scenario. After the lockless refactor pfifo_fast can't leverage the BYPASS optimization. Due to retpolines the overhead for the avoidables enqueue and dequeue operations has increased and we see measurable regressions. The first patch introduces the BYPASS code path for lockless qdisc, and the second one optimizes such path further. Overall this avoids up to 3 indirect calls per xmit packet. Detailed performance figures are reported in the 2nd patch. v2 -> v3: - qdisc_is_empty() has a const argument (Eric) v1 -> v2: - use really an 'empty' flag instead of 'not_empty', as suggested by Eric ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
With commit c5ad119f ("net: sched: pfifo_fast use skb_array") pfifo_fast no longer benefit from the TCQ_F_CAN_BYPASS optimization. Due to retpolines the cost of the enqueue()/dequeue() pair has become relevant and we observe measurable regression for the uncontended scenario when the packet-rate is below line rate. After commit 46b1c18f ("net: sched: put back q.qlen into a single location") we can check for empty qdisc with a reasonably fast operation even for nolock qdiscs. This change extends TCQ_F_CAN_BYPASS support to nolock qdisc. The new chunk of code mirrors closely the existing one for traditional qdisc, leveraging a newly introduced helper to read atomically the qdisc length. Tested with pktgen in queue xmit mode, with pfifo_fast, a MQ device, and MQ root qdisc: threads vanilla patched kpps kpps 1 2465 2889 2 4304 5188 4 7898 9589 Same as above, but with a single queue device: threads vanilla patched kpps kpps 1 2556 2827 2 2900 2900 4 5000 5000 8 4700 4700 No mesaurable changes in the contended scenarios, and more 10% improvement in the uncontended ones. v1 -> v2: - rebased after flag name change Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The queue is marked not empty after acquiring the seqlock, and it's up to the NOLOCK qdisc clearing such flag on dequeue. Since the empty status lays on the same cache-line of the seqlock, it's always hot on cache during the updates. This makes the empty flag update a little bit loosy. Given the lack of synchronization between enqueue and dequeue, this is unavoidable. v2 -> v3: - qdisc_is_empty() has a const argument (Eric) v1 -> v2: - use really an 'empty' flag instead of 'not_empty', as suggested by Eric Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
Add documentation to the tcp_ca_state enum, since this enum is exposed in uapi. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Sowmini Varadhan <sowmini05@gmail.com> Acked-by: Sowmini Varadhan <sowmini05@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-