- 05 Jun, 2019 1 commit
-
-
Stefan Bader authored
Ignore: yes Signed-off-by:Stefan Bader <stefan.bader@canonical.com>
-
- 29 May, 2019 4 commits
-
-
Khalid Elmously authored
Signed-off-by:Khalid Elmously <khalid.elmously@canonical.com>
-
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1830941Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by: -
Alistair Strachan authored
BugLink: https://bugs.launchpad.net/bugs/1830890 Commit 379d98dd ("x86: vdso: Use $LD instead of $CC to link") accidentally broke unwinding from userspace, because ld would strip the .eh_frame sections when linking. Originally, the compiler would implicitly add --eh-frame-hdr when invoking the linker, but when this Makefile was converted from invoking ld via the compiler, to invoking it directly (like vmlinux does), the flag was missed. (The EH_FRAME section is important for the VDSO shared libraries, but not for vmlinux.) Fix the problem by explicitly specifying --eh-frame-hdr, which restores parity with the old method. See relevant bug reports for additional info: https://bugzilla.kernel.org/show_bug.cgi?id=201741 https://bugzilla.redhat.com/show_bug.cgi?id=1659295 Fixes: 379d98dd ("x86: vdso: Use $LD instead of $CC to link") Reported-by:
Florian Weimer <fweimer@redhat.com> Reported-by:
Carlos O'Donell <carlos@redhat.com> Reported-by:
"H. J. Lu" <hjl.tools@gmail.com> Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Tested-by:
Laura Abbott <labbott@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: kernel-team@android.com Cc: Laura Abbott <labbott@redhat.com> Cc: stable <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: X86 ML <x86@kernel.org> Link: https://lkml.kernel.org/r/20181214223637.35954-1-astrachan@google.com (cherry picked from commit cd01544a) Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by:
Connor Kuehl <connor.kuehl@canonical.com> Acked-by: Colin Ian King <colin.king at canonical.com> Acked-by:
-
- 15 May, 2019 3 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Tyler Hicks authored
BugLink: https://launchpad.net/bugs/1818552 The a.out core dump handler is broken and will be removed in 5.1 with upstream commit 08300f44 ("a.out: remove core dumping support"). Additionally, all a.out support will be deprecated in 5.1 with upstream commit eac61655 ("x86: Deprecate a.out support") and completely removed in a future release. Disable it in Ubuntu since it is risky to leave enabled and there are likely no users that depend on it. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-By:
You-Sheng Yang <vicamo.yang@canonical.com> Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1829209Signed-off-by:
-
- 14 May, 2019 32 commits
-
-
Dimitri John Ledkov authored
BugLink: https://bugs.launchpad.net/bugs/1823056Signed-off-by:
Dimitri John Ledkov <xnox@ubuntu.com> Acked-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Dimitri John Ledkov authored
BugLink: https://bugs.launchpad.net/bugs/1823056Signed-off-by:
-
Dimitri John Ledkov authored
BugLink: https://bugs.launchpad.net/bugs/1823056Signed-off-by:
-
Dimitri John Ledkov authored
BugLink: https://bugs.launchpad.net/bugs/1823056Signed-off-by:
-
Dimitri John Ledkov authored
BugLink: https://bugs.launchpad.net/bugs/1823056Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1828420Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 9002b214 upstream. Commit 32a5ad9c ("sysctl: handle overflow for file-max") hooked up min/max values for the file-max sysctl parameter via the .extra1 and .extra2 fields in the corresponding struct ctl_table entry. Unfortunately, the minimum value points at the global 'zero' variable, which is an int. This results in a KASAN splat when accessed as a long by proc_doulongvec_minmax on 64-bit architectures: | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0 | Read of size 8 at addr ffff2000133d1c20 by task systemd/1 | | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x228 | show_stack+0x14/0x20 | dump_stack+0xe8/0x124 | print_address_description+0x60/0x258 | kasan_report+0x140/0x1a0 | __asan_report_load8_noabort+0x18/0x20 | __do_proc_doulongvec_minmax+0x5d8/0x6a0 | proc_doulongvec_minmax+0x4c/0x78 | proc_sys_call_handler.isra.19+0x144/0x1d8 | proc_sys_write+0x34/0x58 | __vfs_write+0x54/0xe8 | vfs_write+0x124/0x3c0 | ksys_write+0xbc/0x168 | __arm64_sys_write+0x68/0x98 | el0_svc_common+0x100/0x258 | el0_svc_handler+0x48/0xc0 | el0_svc+0x8/0xc | | The buggy address belongs to the variable: | zero+0x0/0x40 | | Memory state around the buggy address: | ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa | ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 | ^ | ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 | ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix the splat by introducing a unsigned long 'zero_ul' and using that instead. Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com Fixes: 32a5ad9c ("sysctl: handle overflow for file-max") Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Christian Brauner <christian@brauner.io> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1828420 This reverts commit 4aada79c6793c59e484b69fd4ed591396e2d4b39 which was commit 71492580 upstream. Tetsuo rightly points out that the backport here is incorrect, as it touches the __lock_set_class function instead of the intended __lock_downgrade function. Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 8c2f8708 upstream. The ALSA proc helper manages the child nodes in a linked list, but its addition and deletion is done without any lock. This leads to a corruption if they are operated concurrently. Usually this isn't a problem because the proc entries are added sequentially in the driver probe procedure itself. But the card registrations are done often asynchronously, and the crash could be actually reproduced with syzkaller. This patch papers over it by protecting the link addition and deletion with the parent's mutex. There is "access" mutex that is used for the file access, and this can be reused for this purpose as well. Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Konstantin Khlebnikov authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit e8277b3b upstream. Commit 58bc4c34 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") depends on skipping vmstat entries with empty name introduced in 7aaf7727 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat") but reverted in b29940c1 ("mm: rename and change semantics of nr_indirectly_reclaimable_bytes"). So skipping no longer works and /proc/vmstat has misformatted lines " 0". This patch simply shows debug counters "nr_tlb_remote_*" for UP. Link: http://lkml.kernel.org/r/155481488468.467.4295519102880913454.stgit@buzz Fixes: 58bc4c34 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Roman Gushchin <guro@fb.com> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 0fcc4c8c upstream. When dev_exception_add() returns an error (due to a failed memory allocation), make sure that we move the RCU preemption count back to where it was before we were called. We dropped the RCU read lock inside the loop body, so we can't just "break". sparse complains about this, too: $ make -s C=2 security/device_cgroup.o ./include/linux/rcupdate.h:647:9: warning: context imbalance in 'propagate_exception' - unexpected unlock Fixes: d591fb56 ("device_cgroup: simplify cgroup tree walk in propagate_exception()") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Phil Auld authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 2e8e1922 ] With extremely short cfs_period_us setting on a parent task group with a large number of children the for loop in sched_cfs_period_timer() can run until the watchdog fires. There is no guarantee that the call to hrtimer_forward_now() will ever return 0. The large number of children can make do_sched_cfs_period_timer() take longer than the period. NMI watchdog: Watchdog detected hard LOCKUP on cpu 24 RIP: 0010:tg_nop+0x0/0x10 <IRQ> walk_tg_tree_from+0x29/0xb0 unthrottle_cfs_rq+0xe0/0x1a0 distribute_cfs_runtime+0xd3/0xf0 sched_cfs_period_timer+0xcb/0x160 ? sched_cfs_slack_timer+0xd0/0xd0 __hrtimer_run_queues+0xfb/0x270 hrtimer_interrupt+0x122/0x270 smp_apic_timer_interrupt+0x6a/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> To prevent this we add protection to the loop that detects when the loop has run too many times and scales the period and quota up, proportionally, so that the timer can complete before then next period expires. This preserves the relative runtime quota while preventing the hard lockup. A warning is issued reporting this state and the new values. Signed-off-by:
Phil Auld <pauld@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190319130005.25492-1-pauld@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit a75bb4eb upstream. The clang option -Oz enables *aggressive* optimization for size, which doesn't necessarily result in smaller images, but can have negative impact on performance. Switch back to the less aggressive -Os. This reverts commit 6748cb3c. Suggested-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Felix Fietkau authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 4856bfd2 upstream. There are several scenarios in which mac80211 can call drv_wake_tx_queue after ieee80211_restart_hw has been called and has not yet completed. Driver private structs are considered uninitialized until mac80211 has uploaded the vifs, stations and keys again, so using private tx queue data during that time is not safe. The driver can also not rely on drv_reconfig_complete to figure out when it is safe to accept drv_wake_tx_queue calls again, because it is only called after all tx queues are woken again. To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig is set. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 5f843ed4 upstream. The following commit introduced a bug in one of our error paths: 819319fc ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") it missed to handle the return value of kprobe_optready() as error-value. In reality, the kprobe_optready() returns a bool result, so "true" case must be passed instead of 0. This causes some errors on kprobe boot-time selftests on ARM: [ ] Beginning kprobe tests... [ ] Probe ARM code [ ] kprobe [ ] kretprobe [ ] ARM instruction simulation [ ] Check decoding tables [ ] Run test cases [ ] FAIL: test_case_handler not run [ ] FAIL: Test andge r10, r11, r14, asr r7 [ ] FAIL: Scenario 11 ... [ ] FAIL: Scenario 7 [ ] Total instruction simulation tests=1631, pass=1433 fail=198 [ ] kprobe tests failed This can happen if an optimized probe is unregistered and next kprobe is registered on same address until the previous probe is not reclaimed. If this happens, a hidden aggregated probe may be kept in memory, and no new kprobe can probe same address. Also, in that case register_kprobe() will return "1" instead of minus error value, which can mislead caller logic. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v5.0+ Fixes: 819319fc ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") Link: http://lkml.kernel.org/r/155530808559.32517.539898325433642204.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit fabe38ab upstream. Mark ftrace mcount handler functions nokprobe since probing on these functions with kretprobe pushes return address incorrectly on kretprobe shadow stack. Reported-by:
Francis Deslauriers <francis.deslauriers@efficios.com> Tested-by:
Andrea Righi <righi.andrea@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 3ff9c075 upstream. Verify the stack frame pointer on kretprobe trampoline handler, If the stack frame pointer does not match, it skips the wrong entry and tries to find correct one. This can happen if user puts the kretprobe on the function which can be used in the path of ftrace user-function call. Such functions should not be probed, so this adds a warning message that reports which function should be blacklisted. Tested-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ff8acf92 upstream. Commit 045afc24 ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") removed oldval's zero initialization in arch_futex_atomic_op_inuser because it is not necessary. Unfortunately, Android's arm64 GCC 4.9.4 [1] does not agree: ../kernel/futex.c: In function 'do_futex': ../kernel/futex.c:1658:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] return oldval == cmparg; ^ In file included from ../kernel/futex.c:73:0: ../arch/arm64/include/asm/futex.h:53:6: note: 'oldval' was declared here int oldval, ret, tmp; ^ GCC fails to follow that when ret is non-zero, futex_atomic_op_inuser returns right away, avoiding the uninitialized use that it claims. Restoring the zero initialization works around this issue. [1]: https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/ Cc: stable@vger.kernel.org Fixes: 045afc24 ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 678cce40 upstream. The x86_64 implementation of Poly1305 produces the wrong result on some inputs because poly1305_4block_avx2() incorrectly assumes that when partially reducing the accumulator, the bits carried from limb 'd4' to limb 'h0' fit in a 32-bit integer. This is true for poly1305-generic which processes only one block at a time. However, it's not true for the AVX2 implementation, which processes 4 blocks at a time and therefore can produce intermediate limbs about 4x larger. Fix it by making the relevant calculations use 64-bit arithmetic rather than 32-bit. Note that most of the carries already used 64-bit arithmetic, but the d4 -> h0 carry was different for some reason. To be safe I also made the same change to the corresponding SSE2 code, though that only operates on 1 or 2 blocks at a time. I don't think it's really needed for poly1305_block_sse2(), but it doesn't hurt because it's already x86_64 code. It *might* be needed for poly1305_2block_sse2(), but overflows aren't easy to reproduce there. This bug was originally detected by my patches that improve testmgr to fuzz algorithms against their generic implementation. But also add a test vector which reproduces it directly (in the AVX2 case). Fixes: b1ccc8f4 ("crypto: poly1305 - Add a four block AVX2 variant for x86_64") Fixes: c70f4abe ("crypto: poly1305 - Add a SSE2 SIMD variant for x86_64") Cc: <stable@vger.kernel.org> # v4.3+ Cc: Martin Willi <martin@strongswan.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 2a3f7221 upstream. There is a small race window in the card disconnection code that allows the registration of another card with the very same card id. This leads to a warning in procfs creation as caught by syzkaller. The problem is that we delete snd_cards and snd_cards_lock entries at the very beginning of the disconnection procedure. This makes the slot available to be assigned for another card object while the disconnection procedure is being processed. Then it becomes possible to issue a procfs registration with the existing file name although we check the conflict beforehand. The fix is simply to move the snd_cards and snd_cards_lock clearances at the end of the disconnection procedure. The references to these entries are merely either from the global proc files like /proc/asound/cards or from the card registration / disconnection, so it should be fine to shift at the very end. Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit af4b54a2 upstream. `ni6501_alloc_usb_buffers()` is called from `ni6501_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `ni6501_detach()` will be called from the core comedi module code to clean up. `ni6501_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already beed freed, leading to a double-free error. Fix it bu removing the call to `kfree(devpriv->usb_rx_buf)` from `ni6501_alloc_usb_buffers()`, relying on `ni6501_detach()` to free the memory. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 660cf4ce upstream. If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 663d294b upstream. `vmk80xx_alloc_usb_buffers()` is called from `vmk80xx_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `vmk80xx_detach()` will be called from the core comedi module code to clean up. `vmk80xx_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already been freed, leading to a double-free error. Fix it by removing the call to `kfree(devpriv->usb_rx_buf)` from `vmk80xx_alloc_usb_buffers()`, relying on `vmk80xx_detach()` to free the memory. Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 08b7c2f9 upstream. If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned. I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad>: usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by:
-
he, bo authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit fe2d3df6 upstream. On some laptops, kxcjk1013 is powered off when system enters S3. We need restore the range regiter during resume. Otherwise, the sensor doesn't work properly after S3. Signed-off-by:
he, bo <bo.he@intel.com> Signed-off-by:
Chen, Hu <hu1.chen@intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Georg Ottinger authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 09c6bdee upstream. Having a brief look at at91_adc_read_raw() it is obvious that in the case of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is omitted. If 2 different channels are queried we can end up with a situation where two interrupts are enabled, but only one interrupt is cleared in the interrupt handler. Resulting in a interrupt loop and a system hang. Signed-off-by:
Georg Ottinger <g.ottinger@abatec.at> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Dragos Bogdan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit fccfb9ce upstream. The desired channel has to be selected in order to correctly fill the buffer with the corresponding data. The `ad_sd_write_reg()` already does this, but for the `ad_sd_read_reg_raw()` this was omitted. Fixes: af300848 ("iio:adc: Add common code for ADI Sigma Delta devices") Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Mike Looijmans authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 40a7198a upstream. Standard unit for temperature is millidegrees Celcius, whereas this driver was reporting in degrees. Fix the scale factor in the driver. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 8f4dc2e7 upstream. Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save state area, i.e. don't save/restore EFER across SMM transitions. KVM somewhat models this, e.g. doesn't clear EFER on entry to SMM if the guest doesn't support long mode. But during RSM, KVM unconditionally clears EFER so that it can get back to pure 32-bit mode in order to start loading CRs with their actual non-SMM values. Clear EFER only when it will be written when loading the non-SMM state so as to preserve bits that can theoretically be set on 32-bit vCPUs, e.g. KVM always emulates EFER_SCE. And because CR4.PAE is cleared only to play nice with EFER, wrap that code in the long mode check as well. Note, this may result in a compiler warning about cr4 being consumed uninitialized. Re-read CR4 even though it's technically unnecessary, as doing so allows for more readable code and RSM emulation is not a performance critical path. Fixes: 660a5d51 ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jarkko Sakkinen authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 442601e8 upstream Return -E2BIG when the transfer is incomplete. The upper layer does not retry, so not doing that is incorrect behaviour. Cc: stable@vger.kernel.org Fixes: a2871c62 ("tpm: Add support for Atmel I2C TPMs") Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Stefan Berger <stefanb@linux.ibm.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit f880eea6 upstream. Use specific prototype instead of an opaque pointer so that the compiler can catch function prototype mismatch. Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ec91e78d upstream. Commit e49ce141 ("modpost: use linker section to generate table.") was not so cool as we had expected first; it ended up with ugly section hacks when commit dd2a3aca ("mod/file2alias: make modpost compile on darwin again") came in. Given a certain degree of unknowledge about the link stage of host programs, I really want to see simple, stupid table lookup so that this works in the same way regardless of the underlying executable format. Signed-off-by:
-
