- 13 Jan, 2019 13 commits
-
-
Dan Carpenter authored
[ Upstream commit 9ae4f842 ] If "interface" is NULL then we can't release it and trying to will only lead to an Oops. Fixes: aea71a02 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 530aad77 ] When adjusting sack block sequence numbers, skb_make_writable() gets called to make sure tcp options are all in the linear area, and buffer is not shared. This can cause tcp header pointer to get reallocated, so we must reaload it to avoid memory corruption. This bug pre-dates git history. Reported-by:
Neel Mehta <nmehta@google.com> Reported-by:
Shane Huntley <shuntley@google.com> Reported-by:
Heather Adkins <argv@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 0152eee6 ] Since commit 222d7dbd ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code doesn't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in case the dst_entry was cleared. We also move the skb_dst_force() to a codepath that is not used when the transformation was offloaded, because in this case we don't have a dst_entry attached to the skb. The output and forwarding path was already fixed by commit 9e143793 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Fixes: 222d7dbd ("net: prevent dst uses after free") Reported-by:
Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit ca92e173 ] sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 533555e5 ] xfrm_output_one() does not return a error code when there is no dst_entry attached to the skb, it is still possible crash with a NULL pointer dereference in xfrm_output_resume(). Fix it by return error code -EHOSTUNREACH. Fixes: 9e143793 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit f1733a1d ] There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Hutterer authored
[ Upstream commit c201e380 ] ABS_RESERVED was added in d9ca1c99 and accidentally removed as part of ffe0e7cf when the high-resolution scrolling code was removed. Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit f15096f1 ] According to bindings/regulator/fixed-regulator.txt the 'clocks' and 'clock-names' properties are not valid ones. In order to turn on the Wifi clock the correct location for describing the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly. Fixes: 56354959 ("ARM: dts: imx: add Boundary Devices Nitrogen7 board") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 1e434b70 ] The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2. Fixes: 05136f08 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
-
Hans de Goede authored
[ Upstream commit 40502074 ] The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is likely another ITE based design. The controller die is directly bonded to the PCB with a blob of black glue on top so there are no markings and the 258a vendor-id used is unknown anywhere. But the keyboard has the exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard I have *and* it has the same quirky behavior wrt the rfkill hotkey. Either way as said this keyboard has the same quirk for its rfkill / airplane mode hotkey as the ITE 8595 chip, it only sends a single release event when pressed and released, it never sends a press event. This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing the rfkill key not working on this keyboard. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 462951cd ] For some configs the build fails with: arch/powerpc/mm/dump_linuxpagetables.c: In function 'populate_markers': arch/powerpc/mm/dump_linuxpagetables.c:306:39: error: 'PKMAP_BASE' undeclared (first use in this function) arch/powerpc/mm/dump_linuxpagetables.c:314:50: error: 'LAST_PKMAP' undeclared (first use in this function) These come from highmem.h, including that fixes the build. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 5564597d ] Commit 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware. This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program. Fixes: 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 614b1868 ] We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd8 ("pinctrl: meson: fix pinconf bias disable") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 09 Jan, 2019 27 commits
-
-
Greg Kroah-Hartman authored
-
Paul Burton authored
commit 66a4059b upstream. MIPS' asm/mmzone.h includes the machine/platform mmzone.h unconditionally, but since commit bb53fdf3 ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3") is included by asm/rk4cache.h for all r4k-style configs regardless of CONFIG_NEED_MULTIPLE_NODES. This is problematic when CONFIG_NEED_MULTIPLE_NODES=n because both the loongson3 & ip27 mmzone.h headers unconditionally define the NODE_DATA preprocessor macro which is aready defined by linux/mmzone.h, resulting in the following build error: In file included from ./arch/mips/include/asm/mmzone.h:10, from ./arch/mips/include/asm/r4kcache.h:23, from arch/mips/mm/c-r4k.c:33: ./arch/mips/include/asm/mach-loongson64/mmzone.h:48: error: "NODE_DATA" redefined [-Werror] #define NODE_DATA(n) (&__node_data[(n)]->pglist) In file included from ./include/linux/topology.h:32, from ./include/linux/irq.h:19, from ./include/asm-generic/hardirq.h:13, from ./arch/mips/include/asm/hardirq.h:16, from ./include/linux/hardirq.h:9, from arch/mips/mm/c-r4k.c:11: ./include/linux/mmzone.h:907: note: this is the location of the previous definition #define NODE_DATA(nid) (&contig_page_data) Resolve this by only including the machine mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y, which also removes the need for the empty mach-generic version of the header which we delete. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: bb53fdf3 ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
commit 29bdedfd upstream. Commit e82b0b38 ("spi: bcm2835: Fix race on DMA termination") broke the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit operands (xtensa, older arm ISAs). Fix by changing the dma_pending flag's type from bool to unsigned int. Fixes: e82b0b38 ("spi: bcm2835: Fix race on DMA termination") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Tomas Winkler authored
commit 2ba5780c upstream. tpm_i2c_nuvoton calculated commands duration using TPM 1.x values via tpm_calc_ordinal_duration() also for TPM 2.x chips. Call tpm2_calc_ordinal_duration() for retrieving ordinal duration for TPM 2.X chips. Cc: stable@vger.kernel.org Cc: Nayna Jain <nayna@linux.vnet.ibm.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> (For TPM 2.0) Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
commit 01f54664 upstream. First, rename out_no_locality to out_locality for bailing out on both tpm_cmd_ready() and tpm_request_locality() failure. Second, ignore the return value of go_to_idle() as it may override the return value of the actual tpm operation, the go_to_idle() error will be caught on any consequent command. Last, fix the wrong 'goto out', that jumped back instead of forward. Cc: stable@vger.kernel.org Fixes: 627448e8 ("tpm: separate cmd_ready/go_idle from runtime_pm") Signed-off-by:
-
Maciej W. Rozycki authored
commit 3cc9ffbb upstream. Add the missing adjustment of the month range on alarm reads from the RTC, correcting an issue coming from commit 9c6dfed9 ("rtc: m41t80: add alarm functionality"). The range is 1-12 for hardware and 0-11 for `struct rtc_time', and is already correctly handled on alarm writes to the RTC. It was correct up until commit 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") too, which removed the previous implementation of alarm support. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Fixes: 9c6dfed9 ("rtc: m41t80: add alarm functionality") References: 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marc Zyngier authored
commit 107352a2 upstream. We currently only halt the guest when a vCPU messes with the active state of an SPI. This is perfectly fine for GICv2, but isn't enough for GICv3, where all vCPUs can access the state of any other vCPU. Let's broaden the condition to include any GICv3 interrupt that has an active state (i.e. all but LPIs). Cc: stable@vger.kernel.org Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit df655b75 upstream. Although bit 31 of VTCR_EL2 is RES1, we inadvertently end up setting all of the upper 32 bits to 1 as well because we define VTCR_EL2_RES1 as signed, which is sign-extended when assigning to kvm->arch.vtcr. Lucky for us, the architecture currently treats these upper bits as RES0 so, whilst we've been naughty, we haven't set fire to anything yet. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Georgy A Bystrenin authored
commit 9a596f5b upstream. While resolving a bug with locks on samba shares found a strange behavior. When a file locked by one node and we trying to lock it from another node it fail with errno 5 (EIO) but in that case errno must be set to (EACCES | EAGAIN). This isn't happening when we try to lock file second time on same node. In this case it returns EACCES as expected. Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in mount options). Further investigation showed that the mapping from status_to_posix_error is different for SMB1 and SMB2+ implementations. For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock] (See fs/cifs/netmisc.c line 66) but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO] (see fs/cifs/smb2maperror.c line 383) Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue. BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971Signed-off-by:
Georgy A Bystrenin <gkot@altlinux.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Aaro Koskinen authored
commit edefae94 upstream. Commit 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") added RGMII interface detection for OCTEON III, but it results in the following logs: [ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe [ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe The current RGMII routines are valid only for older OCTEONS that use GMX/ASX hardware blocks. On later chips AGL should be used, but support for that is missing in the mainline. Until that is added, mark the interface as disabled. Fixes: 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Paul Burton authored
commit ff4dd232 upstream. ASIDs have always been stored as unsigned longs, ie. 32 bits on MIPS32 kernels. This is problematic because it is feasible for the ASID version to overflow & wrap around to zero. We currently attempt to handle this overflow by simply setting the ASID version to 1, using asid_first_version(), but we make no attempt to account for the fact that there may be mm_structs with stale ASIDs that have versions which we now reuse due to the overflow & wrap around. Encountering this requires that: 1) A struct mm_struct X is active on CPU A using ASID (V,n). 2) That mm is not used on CPU A for the length of time that it takes for CPU A's asid_cache to overflow & wrap around to the same version V that the mm had in step 1. During this time tasks using the mm could either be sleeping or only scheduled on other CPUs. 3) Some other mm Y becomes active on CPU A and is allocated the same ASID (V,n). 4) mm X now becomes active on CPU A again, and now incorrectly has the same ASID as mm Y. Where struct mm_struct ASIDs are represented above in the format (version, EntryHi.ASID), and on a typical MIPS32 system version will be 24 bits wide & EntryHi.ASID will be 8 bits wide. The length of time required in step 2 is highly dependent upon the CPU & workload, but for a hypothetical 2GHz CPU running a workload which generates a new ASID every 10000 cycles this period is around 248 days. Due to this long period of time & the fact that tasks need to be scheduled in just the right (or wrong, depending upon your inclination) way, this is obviously a difficult bug to encounter but it's entirely possible as evidenced by reports. In order to fix this, simply extend ASIDs to 64 bits even on MIPS32 builds. This will extend the period of time required for the hypothetical system above to encounter the problem from 28 days to around 3 trillion years, which feels safely outside of the realms of possibility. The cost of this is slightly more generated code in some commonly executed paths, but this is pretty minimal: | Code Size Gain | Percentage -----------------------|----------------|------------- decstation_defconfig | +270 | +0.00% 32r2el_defconfig | +652 | +0.01% 32r6el_defconfig | +1000 | +0.01% I have been unable to measure any change in performance of the LMbench lat_ctx or lat_proc tests resulting from the 64b ASIDs on either 32r2el_defconfig+interAptiv or 32r6el_defconfig+I6500 systems. Signed-off-by:
James Hogan <jhogan@kernel.org> References: https://lore.kernel.org/linux-mips/80B78A8B8FEE6145A87579E8435D78C30205D5F3@fzex.ruijie.com.cn/ References: https://lore.kernel.org/linux-mips/1488684260-18867-1-git-send-email-jiwei.sun@windriver.com/ Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: Yu Huabing <yhb@ruijie.com.cn> Cc: stable@vger.kernel.org # 2.6.12+ Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Huacai Chen authored
commit bec0de4c upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Huacai Chen authored
commit 92aa0718 upstream. This patch is borrowed from ARM64 to ensure pmd_present() returns false after pmd_mknotpresent(). This is needed for THP. References: 5bb1cc0f ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()") Reviewed-by:
-
Huacai Chen authored
commit bb53fdf3 upstream. For multi-node Loongson-3 (NUMA configuration), r4k_blast_scache() can only flush Node-0's scache. So we add r4k_blast_scache_node() by using (CAC_BASE | (node_id << NODE_ADDRSPACE_SHIFT)) instead of CKSEG0 as the start address. Signed-off-by:
-
Paul Burton authored
commit adcc81f1 upstream. Mapping the delay slot emulation page as both writeable & executable presents a security risk, in that if an exploit can write to & jump into the page then it can be used as an easy way to execute arbitrary code. Prevent this by mapping the page read-only for userland, and using access_process_vm() with the FOLL_FORCE flag to write to it from mips_dsemul(). This will likely be less efficient due to copy_to_user_page() performing cache maintenance on a whole page, rather than a single line as in the previous use of flush_cache_sigtramp(). However this delay slot emulation code ought not to be running in any performance critical paths anyway so this isn't really a problem, and we can probably do better in copy_to_user_page() anyway in future. A major advantage of this approach is that the fix is small & simple to backport to stable kernels. Reported-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit e5f71a27 upstream. text[s] is a signed char, so using that as index into the font8x16 array can result in negative indices. Cast it to u8 to be safe. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # for v4.7 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit 560ccb75 upstream. When vivid_update_format_cap() is called it should free any overlay bitmap since the compose size will change. Signed-off-by:
-
Nava kishore Manne authored
commit 26068313 upstream. This patch Correct the RX interrupt mask value to handle the RX interrupts properly. Fixes: c8dbdc84 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by:
Nava kishore Manne <nava.manne@xilinx.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Martin Blumenstingl authored
commit 88960068 upstream. Treat "block_count" from struct f2fs_super_block as 64-bit little endian value in sanity_check_raw_super() because struct f2fs_super_block declares "block_count" as "__le64". This fixes a bug where the superblock validation fails on big endian devices with the following error: F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0) F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0) F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock As result of this the partition cannot be mounted. With this patch applied the superblock validation works fine and the partition can be mounted again: F2FS-fs (sda1): Mounted with checkpoint version = 7c84 My little endian x86-64 hardware was able to mount the partition without this fix. To confirm that mounting f2fs filesystems works on big endian machines again I tested this on a 32-bit MIPS big endian (lantiq) device. Fixes: 0cfe75c5 ("f2fs: enhance sanity_check_raw_super() to avoid potential overflows") Cc: stable@vger.kernel.org Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Florian Westphal authored
commit 4cd273bb upstream. (not in Linus's tree now, but in nf.git + linux-next.git already.) age is signed integer, so result can be negative when the timestamps have a large delta. In this case we want to discard the entry. Instead of using age >= 2 || age < 0, just make it unsigned. Fixes: b36e4523 ("netfilter: nf_conncount: fix garbage collection confirm race") Reviewed-by:
Shawn Bohrer <sbohrer@cloudflare.com> Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
-
Florian Westphal authored
commit b36e4523 upstream. Yi-Hung Wei and Justin Pettit found a race in the garbage collection scheme used by nf_conncount. When doing list walk, we lookup the tuple in the conntrack table. If the lookup fails we remove this tuple from our list because the conntrack entry is gone. This is the common cause, but turns out its not the only one. The list entry could have been created just before by another cpu, i.e. the conntrack entry might not yet have been inserted into the global hash. The avoid this, we introduce a timestamp and the owning cpu. If the entry appears to be stale, evict only if: 1. The current cpu is the one that added the entry, or, 2. The timestamp is older than two jiffies The second constraint allows GC to be taken over by other cpu too (e.g. because a cpu was offlined or napi got moved to another cpu). We can't pretend the 'doubtful' entry wasn't in our list. Instead, when we don't find an entry indicate via IS_ERR that entry was removed ('did not exist' or withheld ('might-be-unconfirmed'). This most likely also fixes a xt_connlimit imbalance earlier reported by Dmitry Andrianov. Cc: Dmitry Andrianov <dmitry.andrianov@alertme.com> Reported-by:
Justin Pettit <jpettit@vmware.com> Reported-by:
Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by:
-
Yi-Hung Wei authored
commit 21ba8847 upstream. Currently, we use check_hlist() for garbage colleciton. However, we use the ‘zone’ from the counted entry to query the existence of existing entries in the hlist. This could be wrong when they are in different zones, and this patch fixes this issue. Fixes: e59ea3df ("netfilter: xt_connlimit: honor conntrack zone if available") Signed-off-by:
-
Pablo Neira Ayuso authored
commit 5e5cbc7b upstream. This patch provides an interface to maintain the list of connections and the lookup function to obtain the number of connections in the list. Signed-off-by:
-
Florian Westphal authored
commit ce49480d upstream. Only stored, never read. This is a leftover from commit 7d084877 ("netfilter: connlimit: use rbtree for per-host conntrack obj storage"), which added the rbtree node struct that stores the address instead. Signed-off-by:
-
Filipe Manana authored
commit 41bd6067 upstream. The log tree has a long standing problem that when a file is fsync'ed we only check for new ancestors, created in the current transaction, by following only the hard link for which the fsync was issued. We follow the ancestors using the VFS' dget_parent() API. This means that if we create a new link for a file in a directory that is new (or in an any other new ancestor directory) and then fsync the file using an old hard link, we end up not logging the new ancestor, and on log replay that new hard link and ancestor do not exist. In some cases, involving renames, the file will not exist at all. Example: mkfs.btrfs -f /dev/sdb mount /dev/sdb /mnt mkdir /mnt/A touch /mnt/foo ln /mnt/foo /mnt/A/bar xfs_io -c fsync /mnt/foo <power failure> In this example after log replay only the hard link named 'foo' exists and directory A does not exist, which is unexpected. In other major linux filesystems, such as ext4, xfs and f2fs for example, both hard links exist and so does directory A after mounting again the filesystem. Checking if any new ancestors are new and need to be logged was added in 2009 by commit 12fcfd22 ("Btrfs: tree logging unlink/rename fixes"), however only for the ancestors of the hard link (dentry) for which the fsync was issued, instead of checking for all ancestors for all of the inode's hard links. So fix this by tracking the id of the last transaction where a hard link was created for an inode and then on fsync fallback to a full transaction commit when an inode has more than one hard link and at least one new hard link was created in the current transaction. This is the simplest solution since this is not a common use case (adding frequently hard links for which there's an ancestor created in the current transaction and then fsync the file). In case it ever becomes a common use case, a solution that consists of iterating the fs/subvol btree for each hard link and check if any ancestor is new, could be implemented. This solves many unexpected scenarios reported by Jayashree Mohan and Vijay Chidambaram, and for which there is a new test case for fstests under review. Fixes: 12fcfd22 ("Btrfs: tree logging unlink/rename fixes") CC: stable@vger.kernel.org # 4.4+ Reported-by:
Vijay Chidambaram <vvijay03@gmail.com> Reported-by:
Jayashree Mohan <jayashree2912@gmail.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Macpaul Lin authored
commit eafb27fa upstream. Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Reviewed-by:
Johan Hovold <johan@kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Tejun Heo authored
commit e9d81a1b upstream. CSS_TASK_ITER_PROCS implements process-only iteration by making css_task_iter_advance() skip tasks which aren't threadgroup leaders; however, when an iteration is started css_task_iter_start() calls the inner helper function css_task_iter_advance_css_set() instead of css_task_iter_advance(). As the helper doesn't have the skip logic, when the first task to visit is a non-leader thread, it doesn't get skipped correctly as shown in the following example. # ps -L 2030 PID LWP TTY STAT TIME COMMAND 2030 2030 pts/0 Sl+ 0:00 ./test-thread 2030 2031 pts/0 Sl+ 0:00 ./test-thread # mkdir -p /sys/fs/cgroup/x/a/b # echo threaded > /sys/fs/cgroup/x/a/cgroup.type # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type # echo 2030 > /sys/fs/cgroup/x/a/cgroup.procs # cat /sys/fs/cgroup/x/a/cgroup.threads 2030 2031 # cat /sys/fs/cgroup/x/cgroup.procs 2030 # echo 2030 > /sys/fs/cgroup/x/a/b/cgroup.threads # cat /sys/fs/cgroup/x/cgroup.procs 2031 2030 The last read of cgroup.procs is incorrectly showing non-leader 2031 in cgroup.procs output. This can be fixed by updating css_task_iter_advance() to handle the first advance and css_task_iters_tart() to call css_task_iter_advance() instead of the inner helper. After the fix, the same commands result in the following (correct) result: # ps -L 2062 PID LWP TTY STAT TIME COMMAND 2062 2062 pts/0 Sl+ 0:00 ./test-thread 2062 2063 pts/0 Sl+ 0:00 ./test-thread # mkdir -p /sys/fs/cgroup/x/a/b # echo threaded > /sys/fs/cgroup/x/a/cgroup.type # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type # echo 2062 > /sys/fs/cgroup/x/a/cgroup.procs # cat /sys/fs/cgroup/x/a/cgroup.threads 2062 2063 # cat /sys/fs/cgroup/x/cgroup.procs 2062 # echo 2062 > /sys/fs/cgroup/x/a/b/cgroup.threads # cat /sys/fs/cgroup/x/cgroup.procs 2062 Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
"Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Fixes: 8cfd8147 ("cgroup: implement cgroup v2 thread support") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
