- 04 Apr, 2013 10 commits
-
-
Lukas Czerner authored
Currently when converting extent to initialized we attempt to transfer initialized block to the left neighbour if possible when certain criteria are met. However we do not attempt to do the same for the right neighbor. This commit adds the possibility to transfer initialized block to the right neighbour if: 1. We're not converting the whole extent 2. Both extents are stored in the same extent tree node 3. Right neighbor is initialized 4. Right neighbor is logically abutting the current one 5. Right neighbor is physically abutting the current one 6. Right neighbor would not overflow the length limit This is basically the same logic as with transferring to the left. This will gain us some performance benefits since it is faster than inserting extent and then merging it. It would also prevent some situation in delalloc patch when we might run out of metadata reservation. This is due to the fact that we would attempt to split the extent first (possibly allocating new metadata block) even though we did not counted for that because it can (and will) be merged again. This commit fix that scenario, because we no longer need to split the extent in such case. Signed-off-by:
Lukas Czerner <lczerner@redhat.com>
-
Lukas Czerner authored
Currently on many places in ext4 we're using ext4_get_group_no_and_offset() even though we're only interested in knowing the block group of the particular block, not the offset within the block group so we can use more efficient way to compute block group. This patch introduces ext4_get_group_number() which computes block group for a given block much more efficiently. Use this function instead of ext4_get_group_no_and_offset() everywhere where we're only interested in knowing the block group. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Lukas Czerner authored
Currently in when getting the block group number for a particular block in ext4_block_in_group() we're using ext4_get_group_no_and_offset() which uses do_div() to get the block group and the remainer which is offset within the group. We don't need all of that in ext4_block_in_group() as we only need to figure out the group number. This commit changes ext4_block_in_group() to calculate group number directly. This shows as a big improvement with regards to cpu utilization. Measuring fallocate -l 15T on fresh file system with perf showed that 23% of cpu time was spend in the ext4_get_group_no_and_offset(). With this change it completely disappears from the list only bumping the occurrence of ext4_init_block_bitmap() which is the biggest user of ext4_block_in_group() by 4%. As the result of this change on my system the fallocate call was approx. 10% faster. However since there is '-g' option in mkfs which allow us setting different groups size (mostly for developers) I've introduced new per file system flag whether we have a standard block group size or not. The flag is used to determine whether we can use the bit shift optimization or not. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Dmitry Monakhov authored
Otherwise destroyed ext_sb_info will be part of global shinker list and result in the following OOPS: JBD2: corrupted journal superblock JBD2: recovery failed EXT4-fs (dm-2): error loading journal general protection fault: 0000 [#1] SMP Modules linked in: fuse acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel microcode sg button sd_mod crc_t10dif ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_\ mod CPU 1 Pid: 2758, comm: mount Not tainted 3.8.0-rc3+ #136 /DH55TC RIP: 0010:[<ffffffff811bfb2d>] [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP: 0000:ffff88011d5cbcd8 EFLAGS: 00010207 RAX: 6b6b6b6b6b6b6b6b RBX: 6b6b6b6b6b6b6b53 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff88011d5cbce8 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88011cd3f848 R13: ffff88011cd3f830 R14: ffff88011cd3f000 R15: 0000000000000000 FS: 00007f7b721dd7e0(0000) GS:ffff880121a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fffa6f75038 CR3: 000000011bc1c000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 2758, threadinfo ffff88011d5ca000, task ffff880116aacb80) Stack: ffff88011cd3f000 ffffffff8209b6c0 ffff88011d5cbd18 ffffffff812482f1 00000000000003f3 00000000ffffffea ffff880115f4c200 0000000000000000 ffff88011d5cbda8 ffffffff81249381 ffff8801219d8bf8 ffffffff00000000 Call Trace: [<ffffffff812482f1>] deactivate_locked_super+0x91/0xb0 [<ffffffff81249381>] mount_bdev+0x331/0x340 [<ffffffff81376730>] ? ext4_alloc_flex_bg_array+0x180/0x180 [<ffffffff81362035>] ext4_mount+0x15/0x20 [<ffffffff8124869a>] mount_fs+0x9a/0x2e0 [<ffffffff81277e25>] vfs_kern_mount+0xc5/0x170 [<ffffffff81279c02>] do_new_mount+0x172/0x2e0 [<ffffffff8127aa56>] do_mount+0x376/0x380 [<ffffffff8127ab98>] sys_mount+0x138/0x150 [<ffffffff818ffed9>] system_call_fastpath+0x16/0x1b Code: 8b 05 88 04 eb 00 48 3d 90 ff 06 82 48 8d 58 e8 75 19 4c 89 e7 e8 e4 d7 2c 00 48 c7 c7 00 ff 06 82 e8 58 5f ef ff 5b 41 5c c9 c3 <48> 8b 4b 18 48 8b 73 20 48 89 da 31 c0 48 c7 c7 c5 a0 e4 81 e\ 8 RIP [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP <ffff88011d5cbcd8> Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Dmitry Monakhov authored
It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
-
Dmitry Monakhov authored
The following race is possible: [kjournald2] other_task jbd2_journal_commit_transaction() j_state = T_FINISHED; spin_unlock(&journal->j_list_lock); ->jbd2_journal_remove_checkpoint() ->jbd2_journal_free_transaction(); ->kmem_cache_free(transaction) ->j_commit_callback(journal, transaction); -> USE_AFTER_FREE WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 In order to demonstrace this issue one should mount ext4 with mount -o discard option on SSD disk. This makes callback longer and race window becomes wider. In order to fix this we should mark transaction as finished only after callbacks have completed Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Theodore Ts'o authored
In order to make it simpler to test the code which support i_blocks/indirect-mapped inodes, support the conversion of inodes which are less than 12 blocks and which are contained in no more than a single extent. The primary intended use of this code is to converting freshly created zero-length files and empty directories. Note that the version of chattr in e2fsprogs 1.42.7 and earlier has a check that prevents the clearing of the extent flag. A simple patch which allows "chattr -e <file>" to work will be checked into the e2fsprogs git repository. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
In the case where an inode has a very stale transaction id (tid) in i_datasync_tid or i_sync_tid, it's possible that after a very large (2**31) number of transactions, that the tid number space might wrap, causing tid_geq()'s calculations to fail. Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily", attempted to fix this problem, but it only avoided kjournald spinning forever by fixing the logic in jbd2_log_start_commit(). Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c that might call jbd2_log_start_commit() with a stale tid, those functions will subsequently call jbd2_log_wait_commit() with the same stale tid, and then wait for a very long time. To fix this, we replace the calls to jbd2_log_start_commit() and jbd2_log_wait_commit() with a call to a new function, jbd2_complete_transaction(), which will correctly handle stale tid's. As a bonus, jbd2_complete_transaction() will avoid locking j_state_lock for writing unless a commit needs to be started. This should have a small (but probably not measurable) improvement for ext4's scalability. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reported-by:
Ben Hutchings <ben@decadent.org.uk> Reported-by:
George Barnett <gbarnett@atlassian.com> Cc: stable@vger.kernel.org
-
Theodore Ts'o authored
Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Lukas Czerner <lczerner@redhat.com>
-
Theodore Ts'o authored
[ Added fixup from Lukáš Czerner which only checks the assertion when the inode is not new and is not being freed. ] Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
- 03 Apr, 2013 6 commits
-
-
Theodore Ts'o authored
Move common code in ext4_ind_truncate() and ext4_ext_truncate() into ext4_truncate(). This saves over 60 lines of code. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
Move common code in ext4_ind_punch_hole() and ext4_ext_punch_hole() into ext4_punch_hole(). This saves over 150 lines of code. This also fixes a potential bug when the punch_hole() code is racing against indirect-to-extents or extents-to-indirect migation. We are currently using i_mutex to protect against changes to the inode flag; specifically, the append-only, immutable, and extents inode flags. So we need to take i_mutex before deciding whether to use the extents-specific or indirect-specific punch_hole code. Also, there was a missing call to ext4_inode_block_unlocked_dio() in the indirect punch codepath. This was added in commit 02d262df to block DIO readers racing against the punch operation in the codepath for extent-mapped inodes, but it was missing for indirect-block mapped inodes. One of the advantages of refactoring the code is that it makes such oversights much less likely. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
The older code was far more complicated than it needed to be because of how we spliced in the ext4's new multiblock allocator into ext3's indirect block code. By folding ext4_alloc_blocks() into ext4_alloc_branch(), we make the code far more understable, shave off over 130 lines of code and half a kilobyte of compiled object code. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Zheng Liu authored
After collapsing the handling of data ordered and data writeback codepath, ext4_generic_write_end() has only one caller, ext4_write_end(). So we fold it into ext4_write_end(). Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Lukas Czerner <lczerner@redhat.com>
-
Theodore Ts'o authored
The only difference between how we handle data=ordered and data=writeback is a single call to ext4_jbd2_file_inode(). Eliminate code duplication by factoring out redundant the code paths. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Lukas Czerner <lczerner@redhat.com>
-
Zheng Liu authored
When an extent was zeroed out, we forgot to do convert from cpu to le16. It could make us hit a BUG_ON when we try to write dirty pages out. So fix it. [ Also fix a bug found by Dmitry Monakhov where we were missing le32_to_cpu() calls in the new indirect punch hole code. There are a number of other big endian warnings found by static code analyzers, but we'll wait for the next merge window to fix them all up. These fixes are designed to be Obviously Correct by code inspection, and easy to demonstrate that it won't make any difference (and hence, won't introduce any bugs) on little endian architectures such as x86. --tytso ] Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reported-by:
CAI Qian <caiqian@redhat.com> Reported-by:
Christian Kujau <lists@nerdbynature.de> Cc: Dmitry Monakhov <dmonakhov@openvz.org>
-
- 31 Mar, 2013 5 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...
-
Paul Walmsley authored
This reverts commit 6aa97070. Commit 6aa97070 ("lockdep: check that no locks held at freeze time") causes problems with NFS root filesystems. The failures were noticed on OMAP2 and 3 boards during kernel init: [ BUG: swapper/0/1 still has locks held! ] 3.9.0-rc3-00344-ga937536b #1 Not tainted ------------------------------------- 1 lock held by swapper/0/1: #0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574 stack backtrace: rpc_wait_bit_killable __wait_on_bit out_of_line_wait_on_bit __rpc_execute rpc_run_task rpc_call_sync nfs_proc_get_root nfs_get_root nfs_fs_mount_common nfs_try_mount nfs_fs_mount mount_fs vfs_kern_mount do_mount sys_mount do_mount_root mount_root prepare_namespace kernel_init_freeable kernel_init Although the rootfs mounts, the system is unstable. Here's a transcript from a PM test: http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt Here's what the test log should look like: http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt Mailing list discussion is here: http://lkml.org/lkml/2013/3/4/221 Deal with this for v3.9 by reverting the problem commit, until folks can figure out the right long-term course of action. Signed-off-by:
Paul Walmsley <paul@pwsan.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Jeff Layton <jlayton@redhat.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <maciej.rutecki@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 30 Mar, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "This includes the bug-fix for a >= v3.8-rc1 regression specific to iscsi-target persistent reservation conflict handling (CC'ed to stable), and a tcm_vhost patch to drop VIRTIO_RING_F_EVENT_IDX usage so that in-flight qemu vhost-scsi-pci device code can detect the proper vhost feature bits. Also, there are two more tcm_vhost patches still being discussed by MST and Asias for v3.9 that will be required for the in-flight qemu vhost-scsi-pci device patch to function properly, and that should (hopefully) be the last target fixes for this round." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit
-
- 29 Mar, 2013 12 commits
-
-
Andy Shevchenko authored
On some hardware configurations we have got the request line with the offset. The patch introduces convert_slave_id() helper for that cases. The request line base is came from the driver data provided by the platform_device_id table. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com>
-
Arnd Bergmann authored
As reported by Wu Fengguang's build robot tracking sparse warnings, the dma_spec arguments in the dw_dma_xlate are already byte swapped on little-endian platforms and must not get swapped again. This code is currently not used anywhere, but will be used in Linux 3.10 when the ARM SPEAr platform starts using the generic DMA DT binding. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com>
-
Rafael J. Wysocki authored
The Adam Belay's e-mail address in MAINTAINERS under PNP SUPPORT is not valid any more and I started to maintain that code in the meantime as a matter of fact, so list myself as a maintainer of it along with Bjorn and remove the Adam's entry from it. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull ceph fix from Sage Weil: "This fixes a regression introduced during the last merge window when mapping non-existent images." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: don't zero-fill non-image object requests
-
Alex Elder authored
A result of ENOENT from a read request for an object that's part of an rbd image indicates that there is a hole in that portion of the image. Similarly, a short read for such an object indicates that the remainder of the read should be interpreted a full read with zeros filling out the end of the request. This behavior is not correct for objects that are not backing rbd image data. Currently rbd_img_obj_request_callback() assumes it should be done for all objects. Change rbd_img_obj_request_callback() so it only does this zeroing for image objects. Encapsulate that special handling in its own function. Add an assertion that the image object request is a bio request, since we assume that (and we currently don't support any other types). This resolves a problem identified here: http://tracker.ceph.com/issues/4559 The regression was introduced by bf0d5f50. Reported-by:
Dan van der Ster <dan@vanderster.com> Signed-off-by:
Alex Elder <elder@inktank.com> Reviewed-off-by:
Sage Weil <sage@inktank.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "We've had a busy two weeks of bug fixing. The biggest patches in here are some long standing early-enospc problems (Josef) and a very old race where compression and mmap combine forces to lose writes (me). I'm fairly sure the mmap bug goes all the way back to the introduction of the compression code, which is proof that fsx doesn't trigger every possible mmap corner after all. I'm sure you'll notice one of these is from this morning, it's a small and isolated use-after-free fix in our scrub error reporting. I double checked it here." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: don't drop path when printing out tree errors in scrub Btrfs: fix wrong return value of btrfs_lookup_csum() Btrfs: fix wrong reservation of csums Btrfs: fix double free in the btrfs_qgroup_account_ref() Btrfs: limit the global reserve to 512mb Btrfs: hold the ordered operations mutex when waiting on ordered extents Btrfs: fix space accounting for unlink and rename Btrfs: fix space leak when we fail to reserve metadata space Btrfs: fix EIO from btrfs send in is_extent_unchanged for punched holes Btrfs: fix race between mmap writes and compression Btrfs: fix memory leak in btrfs_create_tree() Btrfs: fix locking on ROOT_REPLACE operations in tree mod log Btrfs: fix missing qgroup reservation before fallocating Btrfs: handle a bogus chunk tree nicely Btrfs: update to use fs_state bit
-
Len Brown authored
Commit 3e7fc708 ("ia64 idle: delete pm_idle") in 3.9-rc1 didn't finish the job, leaving an un-initialized reference to (*idle)(). [ Haven't seen a crash from this - but seems like we are just being lucky that "idle" is zero so it does get initialized before we jump to randomland - Len ] Reported-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull arc architecture fixes from Vineet Gupta: "This includes fix for a serious bug in DMA mapping API, make allyesconfig wreckage, removal of bogus email-list placeholder in MAINTAINERS, a typo in ptrace helper code and last remaining changes for syscall ABI v3 which we are finally starting to transition-to internally. The request is late than I intended to - but I was held up with debugging a timer link list corruption, for which a proposed fix to generic timer code was sent out to lkml/tglx earlier today." * 'for-curr' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix the typo in event identifier flags used by ptrace arc: fix dma_address assignment during dma_map_sg() ARC: Remove SET_PERSONALITY (tracks cross-arch change) ARC: ABIv3: fork/vfork wrappers not needed in "no-legacy-syscall" ABI ARC: ABIv3: Print the correct ABI ver ARC: make allyesconfig build breakages ARC: MAINTAINERS update for ARC
-
Josef Bacik authored
A user reported a panic where we were panicing somewhere in tree_backref_for_extent from scrub_print_warning. He only captured the trace but looking at scrub_print_warning we drop the path right before we mess with the extent buffer to print out a bunch of stuff, which isn't right. So fix this by dropping the path after we use the eb if we need to. Thanks, Cc: stable@vger.kernel.org Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Nicholas Bellinger authored
This patch fixes a regression introduced in v3.8-rc1 code where a failed target_check_reservation() check in target_setup_cmd_from_cdb() was causing an incorrect SAM_STAT_GOOD status to be returned during a WRITE operation performed by an unregistered / unreserved iscsi initiator port. This regression is only effecting iscsi-target due to a special case check for TCM_RESERVATION_CONFLICT within iscsi_target_erl1.c:iscsit_execute_cmd(), and was still correctly disallowing WRITE commands from backend submission for unregistered / unreserved initiator ports, while returning the incorrect SAM_STAT_GOOD status due to the missing SAM_STAT_RESERVATION_CONFLICT assignment. This regression was first introduced with: commit de103c93 Author: Christoph Hellwig <hch@lst.de> Date: Tue Nov 6 12:24:09 2012 -0800 target: pass sense_reason as a return value Go ahead and re-add the missing SAM_STAT_RESERVATION_CONFLICT assignment during a target_check_reservation() failure, so that iscsi-target code sends the correct SCSI status. All other fabrics using target_submit_cmd_*() with a RESERVATION_CONFLICT call to transport_generic_request_failure() are not effected by this bug. Reported-by:
Jeff Leung <jleung@curriegrad2004.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch adds a VHOST_SCSI_FEATURES mask minus VIRTIO_RING_F_EVENT_IDX so that vhost-scsi-pci userspace will strip this feature bit once GET_FEATURES reports it as being unsupported on the host. This is to avoid a bug where ->handle_kicks() are missed when EVENT_IDX is enabled by default in userspace code. (mst: Rename to VHOST_SCSI_FEATURES + add comment) Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Asias He <asias@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Michel Lespinasse authored
This reverts commit 18693050 ("mm: introduce VM_POPULATE flag to better deal with racy userspace programs"). VM_POPULATE only has any effect when userspace plays racy games with vmas by trying to unmap and remap memory regions that mmap or mlock are operating on. Also, the only effect of VM_POPULATE when userspace plays such games is that it avoids populating new memory regions that get remapped into the address range that was being operated on by the original mmap or mlock calls. Let's remove VM_POPULATE as there isn't any strong argument to mandate a new vm_flag. Signed-off-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Mar, 2013 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg Kroah-Hartman: "Here are some USB fixes to resolve issues reported recently, as well as a new device id for the ftdi_sio driver." * tag 'usb-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD usb: Fix compile error by selecting USB_OTG_UTILS USB: serial: fix hang when opening port USB: EHCI: fix bug in iTD/siTD DMA pool allocation xhci: Don't warn on empty ring for suspended devices. usb: xhci: Fix TRB transfer length macro used for Event TRB. usb/acpi: binding xhci root hub usb port with ACPI usb: add find_raw_port_number callback to struct hc_driver() usb: xhci: fix build warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull TTY/serial fixes from Greg Kroah-Hartman: "Here are some tty/serial driver fixes for 3.9. The big thing here is the fix for the huge mess we caused renaming the 8250 driver accidentally in the 3.7 kernel release, without realizing that there were users of the module options that suddenly broke. This is now resolved, and, to top the injury off, we have a backwards- compatible option for those users who got used to the new name since 3.7. Ugh, sorry about that. Other than that, some other minor fixes for issues that have been reported by users." * tag 'tty-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Xilinx: ARM: UART: clear pending irqs before enabling irqs TTY: 8250, deprecated 8250_core.* options TTY: 8250, revert module name change serial: 8250_pci: Add WCH CH352 quirk to avoid Xscale detection tty: atmel_serial_probe(): index of atmel_ports[] fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg Kroah-Hartman: "Here are two tiny staging driver fixes to resolve issues that have been reported." * tag 'staging-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: s626: fix continuous acquisition staging: zcache: fix typo "64_BIT"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull sysfs fixes from Greg Kroah-Hartman: "Here are two fixes for sysfs that resolve issues that have been found by the Trinity fuzz tool, causing oopses in sysfs. They both have been in linux-next for a while to ensure that they do not cause any other problems." * tag 'driver-core-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: handle failure path correctly for readdir() sysfs: fix race between readdir and lseek
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg Kroah-Hartman: "Here are some small char/misc driver fixes that resolve issues recently reported against the 3.9-rc kernels. All have been in linux-next for a while." * tag 'char-misc-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: VMCI: Fix process-to-process DRGAMs. mei: ME hardware reset needs to be synchronized mei: add mei_stop function to stop mei device extcon: max77693: Initialize register of MUIC device to bring up it without platform data extcon: max77693: Fix bug of wrong pointer when platform data is not used extcon: max8997: Check the pointer of platform data to protect null pointer error
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael J Wysocki: - Fix for a recent cpufreq regression related to acpi-cpufreq and suspend/resume from Viresh Kumar. - cpufreq stats reference counting fix from Viresh Kumar. - intel_pstate driver fixes from Dirk Brandewie and Konrad Rzeszutek Wilk. - New ACPI suspend blacklist entry for Sony Vaio VGN-FW21M from Fabio Valentini. - ACPI Platform Error Interface (APEI) fix from Chen Gong. - PCI root bridge hotplug locking fix from Yinghai Lu. * tag 'pm+acpi-3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / ACPI: hold acpi_scan_lock during root bus hotplug ACPI / APEI: fix error status check condition for CPER ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21M cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init() cpufreq: stats: do cpufreq_cpu_put() corresponding to cpufreq_cpu_get() intel-pstate: Use #defines instead of hard-coded values. cpufreq / intel_pstate: Fix calculation of current frequency cpufreq / intel_pstate: Add function to check that all MSRs are valid
-