- 26 May, 2018 18 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kasan: fix memory hotplug during boot kasan: free allocated shadow memory on MEM_CANCEL_ONLINE checkpatch: fix macro argument precedence test init/main.c: include <linux/mem_encrypt.h> kernel/sys.c: fix potential Spectre v1 issue mm/memory_hotplug: fix leftover use of struct page during hotplug proc: fix smaps and meminfo alignment mm: do not warn on offline nodes unless the specific node is explicitly requested mm, memory_hotplug: make has_unmovable_pages more robust mm/kasan: don't vfree() nonexistent vm_area MAINTAINERS: change hugetlbfs maintainer and update files ipc/shm: fix shmat() nil address after round-down when remapping Revert "ipc/shm: Fix shmat mmap nil-page protection" idr: fix invalid ptr dereference on item delete ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio" mm: fix nr_rotate_swap leak in swapon() error case
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Let's begin the holiday weekend with some networking fixes: 1) Whoops need to restrict cfg80211 wiphy names even more to 64 bytes. From Eric Biggers. 2) Fix flags being ignored when using kernel_connect() with SCTP, from Xin Long. 3) Use after free in DCCP, from Alexey Kodanev. 4) Need to check rhltable_init() return value in ipmr code, from Eric Dumazet. 5) XDP handling fixes in virtio_net from Jason Wang. 6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu. 7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack Morgenstein. 8) Prevent out-of-bounds speculation using indexes in BPF, from Daniel Borkmann. 9) Fix regression added by AF_PACKET link layer cure, from Willem de Bruijn. 10) Correct ENIC dma mask, from Govindarajulu Varadarajan. 11) Missing config options for PMTU tests, from Stefano Brivio" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits) ibmvnic: Fix partial success login retries selftests/net: Add missing config options for PMTU tests mlx4_core: allocate ICM memory in page size chunks enic: set DMA mask to 47 bit ppp: remove the PPPIOCDETACH ioctl ipv4: remove warning in ip_recv_error net : sched: cls_api: deal with egdev path only if needed vhost: synchronize IOTLB message with dev cleanup packet: fix reserve calculation net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands net/mlx5e: When RXFCS is set, add FCS data into checksum calculation bpf: properly enforce index mask to prevent out-of-bounds speculation net/mlx4: Fix irq-unsafe spinlock usage net: phy: broadcom: Fix bcm_write_exp() net: phy: broadcom: Fix auxiliary control register reads net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message ibmvnic: Only do H_EOI for mobility events tuntap: correctly set SOCKWQ_ASYNC_NOSPACE virtio-net: fix leaking page for gso packet during mergeable XDP ... -
David Hildenbrand authored
Using module_init() is wrong. E.g. ACPI adds and onlines memory before our memory notifier gets registered. This makes sure that ACPI memory detected during boot up will not result in a kernel crash. Easily reproducible with QEMU, just specify a DIMM when starting up. Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com Fixes: 786a8959 ("kasan: disable memory hotplug") Signed-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
We have to free memory again when we cancel onlining, otherwise a later onlining attempt will fail. Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com Fixes: fa69b598 ("mm/kasan: add support for memory hotplug") Signed-off-by:
-
Joe Perches authored
checkpatch's macro argument precedence test is broken so fix it. Link: http://lkml.kernel.org/r/5dd900e9197febc1995604bb33c23c136d8b33ce.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Mathieu Malaterre authored
In commit c7753208 ("x86, swiotlb: Add memory encryption support") a call to function `mem_encrypt_init' was added. Include prototype defined in header <linux/mem_encrypt.h> to prevent a warning reported during compilation with W=1: init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes] Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.orgSigned-off-by:
Mathieu Malaterre <malat@debian.org> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Gargi Sharma <gs051095@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
`resource' can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) Fix this by sanitizing *resource* before using it to index current->signal->rlim Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.comSigned-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
Jonathan Cameron authored
The case of a new numa node got missed in avoiding using the node info from page_struct during hotplug. In this path we have a call to register_mem_sect_under_node (which allows us to specify it is hotplug so don't change the node), via link_mem_sections which unfortunately does not. Fix is to pass check_nid through link_mem_sections as well and disable it in the new numa node path. Note the bug only 'sometimes' manifests depending on what happens to be in the struct page structures - there are lots of them and it only needs to match one of them. The result of the bug is that (with a new memory only node) we never successfully call register_mem_sect_under_node so don't get the memory associated with the node in sysfs and meminfo for the node doesn't report it. It came up whilst testing some arm64 hotplug patches, but appears to be universal. Whilst I'm triggering it by removing then reinserting memory to a node with no other elements (thus making the node disappear then appear again), it appears it would happen on hotplugging memory where there was none before and it doesn't seem to be related the arm64 patches. These patches call __add_pages (where most of the issue was fixed by Pavel's patch). If there is a node at the time of the __add_pages call then all is well as it calls register_mem_sect_under_node from there with check_nid set to false. Without a node that function returns having not done the sysfs related stuff as there is no node to use. This is expected but it is the resulting path that fails... Exact path to the problem is as follows: mm/memory_hotplug.c: add_memory_resource() The node is not online so we enter the 'if (new_node)' twice, on the second such block there is a call to link_mem_sections which calls into drivers/node.c: link_mem_sections() which calls drivers/node.c: register_mem_sect_under_node() which calls get_nid_for_pfn and keeps trying until the output of that matches the expected node (passed all the way down from add_memory_resource) It is effectively the same fix as the one referred to in the fixes tag just in the code path for a new node where the comments point out we have to rerun the link creation because it will have failed in register_new_memory (as there was no node at the time). (actually that comment is wrong now as we don't have register_new_memory any more it got renamed to hotplug_memory_register in Pavel's patch). Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com Fixes: fc44f7f9 ("mm/memory_hotplug: don't read nid from struct page during hotplug") Signed-off-by:Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Hugh Dickins authored
The 4.17-rc /proc/meminfo and /proc/<pid>/smaps look ugly: single-digit numbers (commonly 0) are misaligned. Remove seq_put_decimal_ull_width()'s leftover optimization for single digits: it's wrong now that num_to_str() takes care of the width. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805241554210.1326@eggly.anvils Fixes: d1be35cb ("proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps") Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Andrei Vagin <avagin@openvz.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Michal Hocko authored
Oscar has noticed that we splat WARNING: CPU: 0 PID: 64 at ./include/linux/gfp.h:467 vmemmap_alloc_block+0x4e/0xc9 [...] CPU: 0 PID: 64 Comm: kworker/u4:1 Tainted: G W E 4.17.0-rc5-next-20180517-1-default+ #66 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: kacpi_hotplug acpi_hotplug_work_fn Call Trace: vmemmap_populate+0xf2/0x2ae sparse_mem_map_populate+0x28/0x35 sparse_add_one_section+0x4c/0x187 __add_pages+0xe7/0x1a0 add_pages+0x16/0x70 add_memory_resource+0xa3/0x1d0 add_memory+0xe4/0x110 acpi_memory_device_add+0x134/0x2e0 acpi_bus_attach+0xd9/0x190 acpi_bus_scan+0x37/0x70 acpi_device_hotplug+0x389/0x4e0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x146/0x340 worker_thread+0x47/0x3e0 kthread+0xf5/0x130 ret_from_fork+0x35/0x40 when adding memory to a node that is currently offline. The VM_WARN_ON is just too loud without a good reason. In this particular case we are doing alloc_pages_node(node, GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_NOWARN, order) so we do not insist on allocating from the given node (it is more a hint) so we can fall back to any other populated node and moreover we explicitly ask to not warn for the allocation failure. Soften the warning only to cases when somebody asks for the given node explicitly by __GFP_THISNODE. Link: http://lkml.kernel.org/r/20180523125555.30039-3-mhocko@kernel.orgSigned-off-by:Oscar Salvador <osalvador@techadventures.net> Tested-by:
-
Michal Hocko authored
Oscar has reported: : Due to an unfortunate setting with movablecore, memblocks containing bootmem : memory (pages marked by get_page_bootmem()) ended up marked in zone_movable. : So while trying to remove that memory, the system failed in do_migrate_range : and __offline_pages never returned. : : This can be reproduced by running : qemu-system-x86_64 -m 6G,slots=8,maxmem=8G -numa node,mem=4096M -numa node,mem=2048M : and movablecore=4G kernel command line : : linux kernel: BIOS-provided physical RAM map: : linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable : linux kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved : linux kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved : linux kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable : linux kernel: BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved : linux kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved : linux kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved : linux kernel: BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable : linux kernel: NX (Execute Disable) protection: active : linux kernel: SMBIOS 2.8 present. : linux kernel: DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org : linux kernel: Hypervisor detected: KVM : linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved : linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable : linux kernel: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 : : linux kernel: SRAT: PXM 0 -> APIC 0x00 -> Node 0 : linux kernel: SRAT: PXM 1 -> APIC 0x01 -> Node 1 : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] : linux kernel: ACPI: SRAT: Node 1 PXM 1 [mem 0x140000000-0x1bfffffff] : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x1c0000000-0x43fffffff] hotplug : linux kernel: NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x0 : linux kernel: NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0 : linux kernel: NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffffff] : linux kernel: NODE_DATA(1) allocated [mem 0x1bffd3000-0x1bfffcfff] : : zoneinfo shows that the zone movable is placed into both numa nodes: : Node 0, zone Movable : pages free 160140 : min 1823 : low 2278 : high 2733 : spanned 262144 : present 262144 : managed 245670 : Node 1, zone Movable : pages free 448427 : min 3827 : low 4783 : high 5739 : spanned 524288 : present 524288 : managed 515766 Note how only Node 0 has a hutplugable memory region which would rule it out from the early memblock allocations (most likely memmap). Node1 will surely contain memmaps on the same node and those would prevent offlining to succeed. So this is arguably a configuration issue. Although one could argue that we should be more clever and rule early allocations from the zone movable. This would be correct but probably not worth the effort considering what a hack movablecore is. Anyway, We could do better for those cases though. We rely on start_isolate_page_range resp. has_unmovable_pages to do their job. The first one isolates the whole range to be offlined so that we do not allocate from it anymore and the later makes sure we are not stumbling over non-migrateable pages. has_unmovable_pages is overly optimistic, however. It doesn't check all the pages if we are withing zone_movable because we rely that those pages will be always migrateable. As it turns out we are still not perfect there. While bootmem pages in zonemovable sound like a clear bug which should be fixed let's remove the optimization for now and warn if we encounter unmovable pages in zone_movable in the meantime. That should help for now at least. Btw. this wasn't a real problem until commit 72b39cfc ("mm, memory_hotplug: do not fail offlining too early") because we used to have a small number of retries and then failed. This turned out to be too fragile though. Link: http://lkml.kernel.org/r/20180523125555.30039-2-mhocko@kernel.orgSigned-off-by:
-
Andrey Ryabinin authored
KASAN uses different routines to map shadow for hot added memory and memory obtained in boot process. Attempt to offline memory onlined by normal boot process leads to this: Trying to vfree() nonexistent vm area (000000005d3b34b9) WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190 Call Trace: kasan_mem_notifier+0xad/0xb9 notifier_call_chain+0x166/0x260 __blocking_notifier_call_chain+0xdb/0x140 __offline_pages+0x96a/0xb10 memory_subsys_offline+0x76/0xc0 device_offline+0xb8/0x120 store_mem_state+0xfa/0x120 kernfs_fop_write+0x1d5/0x320 __vfs_write+0xd4/0x530 vfs_write+0x105/0x340 SyS_write+0xb0/0x140 Obviously we can't call vfree() to free memory that wasn't allocated via vmalloc(). Use find_vm_area() to see if we can call vfree(). Unfortunately it's a bit tricky to properly unmap and free shadow allocated during boot, so we'll have to keep it. If memory will come online again that shadow will be reused. Matthew asked: how can you call vfree() on something that isn't a vmalloc address? vfree() is able to free any address returned by __vmalloc_node_range(). And __vmalloc_node_range() gives you any address you ask. It doesn't have to be an address in [VMALLOC_START, VMALLOC_END] range. That's also how the module_alloc()/module_memfree() works on architectures that have designated area for modules. [aryabinin@virtuozzo.com: improve comments] Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com [akpm@linux-foundation.org: fix typos, reflow comment] Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com Fixes: fa69b598 ("mm/kasan: add support for memory hotplug") Signed-off-by:Paul Menzel <pmenzel+linux-kasan-dev@molgen.mpg.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mike Kravetz authored
The current hugetlbfs maintainer has not been active for more than a few years. I have been been active in this area for more than two years and plan to remain active in the foreseeable future. Also, update the hugetlbfs entry to include linux-mm mail list and additional hugetlbfs related files. hugetlb.c and hugetlb.h are not 100% hugetlbfs, but a majority of their content is hugetlbfs related. Link: http://lkml.kernel.org/r/20180518225236.19079-1-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
-
Davidlohr Bueso authored
shmat()'s SHM_REMAP option forbids passing a nil address for; this is in fact the very first thing we check for. Andrea reported that for SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check, but we need to check again if the address was rounded down to nil. As of this patch, such cases will return -EINVAL. Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Davidlohr Bueso authored
Patch series "ipc/shm: shmat() fixes around nil-page". These patches fix two issues reported[1] a while back by Joe and Andrea around how shmat(2) behaves with nil-page. The first reverts a commit that it was incorrectly thought that mapping nil-page (address=0) was a no no with MAP_FIXED. This is not the case, with the exception of SHM_REMAP; which is address in the second patch. I chose two patches because it is easier to backport and it explicitly reverts bogus behaviour. Both patches ought to be in -stable and ltp testcases need updated (the added testcase around the cve can be modified to just test for SHM_RND|SHM_REMAP). [1] lkml.kernel.org/r/20180430172152.nfa564pvgpk3ut7p@linux-n805 This patch (of 2): Commit 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection") worked on the idea that we should not be mapping as root addr=0 and MAP_FIXED. However, it was reported that this scenario is in fact valid, thus making the patch both bogus and breaks userspace as well. For example X11's libint10.so relies on shmat(1, SHM_RND) for lowmem initialization[1]. [1] https://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/os-support/linux/int10/linux.c#n347 Link: http://lkml.kernel.org/r/20180503203243.15045-2-dave@stgolabs.net Fixes: 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection") Signed-off-by:
Joe Lawrence <joe.lawrence@redhat.com> Reported-by:
-
Matthew Wilcox authored
If the radix tree underlying the IDR happens to be full and we attempt to remove an id which is larger than any id in the IDR, we will call __radix_tree_delete() with an uninitialised 'slot' pointer, at which point anything could happen. This was easiest to hit with a single entry at id 0 and attempting to remove a non-0 id, but it could have happened with 64 entries and attempting to remove an id >= 64. Roman said: The syzcaller test boils down to opening /dev/kvm, creating an eventfd, and calling a couple of KVM ioctls. None of this requires superuser. And the result is dereferencing an uninitialized pointer which is likely a crash. The specific path caught by syzbot is via KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are other user-triggerable paths, so cc:stable is probably justified. Matthew added: We have around 250 calls to idr_remove() in the kernel today. Many of them pass an ID which is embedded in the object they're removing, so they're safe. Picking a few likely candidates: drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl. drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar drivers/atm/nicstar.c could be taken down by a handcrafted packet Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org Fixes: 0a835c4f ("Reimplement IDR and IDA using the radix tree") Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com> Debugged-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Changwei Ge authored
This reverts commit ba16ddfb ("ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"). In my testing, this patch introduces a problem that mkfs can't have slots more than 16 with 4k block size. And the original logic is safe actually with the situation it mentions so revert this commit. Attach test log: (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 0, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 1, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 2, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 3, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 4, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 5, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 6, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 7, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 8, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 9, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 10, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 11, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 12, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 13, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 14, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 15, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 16, vec_len = 4096, vec_start = 0 (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:471 ERROR: Adding page[16] to bio failed, page ffffea0002d7ed40, len 0, vec_len 4096, vec_start 0,bi_sector 8192 (mkfs.ocfs2,27479,2):o2hb_read_slots:500 ERROR: status = -5 (mkfs.ocfs2,27479,2):o2hb_populate_slot_data:1911 ERROR: status = -5 (mkfs.ocfs2,27479,2):o2hb_region_dev_write:2012 ERROR: status = -5 Link: http://lkml.kernel.org/r/SIXPR06MB0461721F398A5A92FC68C39ED5920@SIXPR06MB0461.apcprd06.prod.outlook.comSigned-off-by:
Changwei Ge <ge.changwei@h3c.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Omar Sandoval authored
If swapon() fails after incrementing nr_rotate_swap, we don't decrement it and thus effectively leak it. Make sure we decrement it if we incremented it. Link: http://lkml.kernel.org/r/b6fe6b879f17fa68eee6cbd876f459f6e5e33495.1526491581.git.osandov@fb.com Fixes: 81a0298b ("mm, swap: don't use VMA based swap readahead if HDD is used as swap") Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Rik van Riel <riel@surriel.com> Reviewed-by:
"Huang, Ying" <ying.huang@intel.com> Signed-off-by:
-
- 25 May, 2018 17 commits
-
-
Thomas Falcon authored
In its current state, the driver will handle backing device login in a loop for a certain number of retries while the device returns a partial success, indicating that the driver may need to try again using a smaller number of resources. The variable it checks to continue retrying may change over the course of operations, resulting in reallocation of resources but exits without sending the login attempt. Guard against this by introducing a boolean variable that will retain the state indicating that the driver needs to reattempt login with backing device firmware. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-24 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in the original fix to prevent out of bounds speculation when multiple tail call maps from different branches or calls end up at the same tail call helper invocation, from Daniel. 2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in case of missing numa support and another one to update kernel config to properly support xdp_meta.sh test, from Anders. ... Would be great if you have a chance to merge net into net-next after that. The verifier fix would be needed later as a dependency in bpf-next for upcomig work there. When you do the merge there's a trivial conflict on BPF side with 849fa506 ("bpf/verifier: refine retval R0 state for bpf_get_stack helper"): Resolution is to keep both functions, the do_refine_retval_range() and record_func_map(). ==================== Signed-off-by:
-
Stefano Brivio authored
PMTU tests in pmtu.sh need support for VTI, VTI6 and dummy interfaces: add them to config file. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: d1f1b9cb ("selftests: net: Introduce first PMTU test") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - prevent hardif_put call with NULL parameter, by Colin Ian King - Avoid race in Translation Table allocator, by Sven Eckelmann - Fix Translation Table sync flags for intermediate Responses, by Linus Luessing - prevent sending inconsistent Translation Table TVLVs, by Marek Lindner ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull more arm64 fixes from Will Deacon: - fix application of read-only permissions to kernel section mappings - sanitise reported ESR values for signals delivered on a kernel address - ensure tishift GCC helpers are exported to modules - fix inline asm constraints for some LSE atomics * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Make sure permission updates happen for pmd/pud arm64: fault: Don't leak data in ESR context for user fault on kernel VA arm64: export tishift functions to modules arm64: lse: Add early clobbers to some input/output asm operands
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "Just one fix, to make sure the PCR (Processor Compatibility Register) is reset on boot. Otherwise if we're running in compat mode in a guest (eg. pretending a Power9 is a Power8) and the host kernel oopses and kdumps then the kdump kernel's userspace will be running in Power8 mode, and will SIGILL if it uses Power9-only instructions. Thanks to Michael Neuling" * tag 'powerpc-4.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Clear PCR on boot
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Propagate correct error code for RPMB requests MMC host: - sdhci-iproc: Drop hard coded cap for 1.8v - sdhci-iproc: Fix 32bit writes for transfer mode - sdhci-iproc: Enable SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus" * tag 'mmc-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-iproc: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register mmc: sdhci-iproc: remove hard coded mmc cap 1.8v mmc: block: propagate correct returned value in mmc_rpmb_ioctl
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Only two sets of drivers fixes: one rcar-du lvds regression fix, and a group of fixes for vmwgfx" * tag 'drm-fixes-for-v4.17-rc7' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Schedule an fb dirty update after resume drm/vmwgfx: Fix host logging / guestinfo reading error paths drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros drm: rcar-du: lvds: Fix crash in .atomic_check when disabling connector
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Two fixes: - a timer pause event notification was garbled upon the recent hardening work; corrected now - HD-audio runtime PM regression fix due to the incorrect return type" * tag 'sound-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix runtime PM ALSA: timer: Fix pause event notification -
Qing Huang authored
When a system is under memory presure (high usage with fragments), the original 256KB ICM chunk allocations will likely trigger kernel memory management to enter slow path doing memory compact/migration ops in order to complete high order memory allocations. When that happens, user processes calling uverb APIs may get stuck for more than 120s easily even though there are a lot of free pages in smaller chunks available in the system. Syslog: ... Dec 10 09:04:51 slcc03db02 kernel: [397078.572732] INFO: task oracle_205573_e:205573 blocked for more than 120 seconds. ... With 4KB ICM chunk size on x86_64 arch, the above issue is fixed. However in order to support smaller ICM chunk size, we need to fix another issue in large size kcalloc allocations. E.g. Setting log_num_mtt=30 requires 1G mtt entries. With the 4KB ICM chunk size, each ICM chunk can only hold 512 mtt entries (8 bytes for each mtt entry). So we need a 16MB allocation for a table->icm pointer array to hold 2M pointers which can easily cause kcalloc to fail. The solution is to use kvzalloc to replace kcalloc which will fall back to vmalloc automatically if kmalloc fails. Signed-off-by:
Qing Huang <qing.huang@oracle.com> Acked-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
In commit 624dbf55 ("driver/net: enic: Try DMA 64 first, then failover to DMA") DMA mask was changed from 40 bits to 64 bits. Hardware actually supports only 47 bits. Fixes: 624dbf55 ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Eric Biggers authored
The PPPIOCDETACH ioctl effectively tries to "close" the given ppp file before f_count has reached 0, which is fundamentally a bad idea. It does check 'f_count < 2', which excludes concurrent operations on the file since they would only be possible with a shared fd table, in which case each fdget() would take a file reference. However, it fails to account for the fact that even with 'f_count == 1' the file can still be linked into epoll instances. As reported by syzbot, this can trivially be used to cause a use-after-free. Yet, the only known user of PPPIOCDETACH is pppd versions older than ppp-2.4.2, which was released almost 15 years ago (November 2003). Also, PPPIOCDETACH apparently stopped working reliably at around the same time, when the f_count check was added to the kernel, e.g. see https://lkml.org/lkml/2002/12/31/83. Also, the current 'f_count < 2' check makes PPPIOCDETACH only work in single-threaded applications; it always fails if called from a multithreaded application. All pppd versions released in the last 15 years just close() the file descriptor instead. Therefore, instead of hacking around this bug by exporting epoll internals to modules, and probably missing other related bugs, just remove the PPPIOCDETACH ioctl and see if anyone actually notices. Leave a stub in place that prints a one-time warning and returns EINVAL. Reported-by: syzbot+16363c99d4134717c05b@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
Guillaume Nault <g.nault@alphalink.fr> Tested-by:
-
Willem de Bruijn authored
A precondition check in ip_recv_error triggered on an otherwise benign race. Remove the warning. The warning triggers when passing an ipv6 socket to this ipv4 error handling function. RaceFuzzer was able to trigger it due to a race in setsockopt IPV6_ADDRFORM. --- CPU0 do_ipv6_setsockopt sk->sk_socket->ops = &inet_dgram_ops; --- CPU1 sk->sk_prot->recvmsg udp_recvmsg ip_recv_error WARN_ON_ONCE(sk->sk_family == AF_INET6); --- CPU0 do_ipv6_setsockopt sk->sk_family = PF_INET; This socket option converts a v6 socket that is connected to a v4 peer to an v4 socket. It updates the socket on the fly, changing fields in sk as well as other structs. This is inherently non-atomic. It races with the lockless udp_recvmsg path. No other code makes an assumption that these fields are updated atomically. It is benign here, too, as ip_recv_error cares only about the protocol of the skbs enqueued on the error queue, for which sk_family is not a precise predictor (thanks to another isue with IPV6_ADDRFORM). Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr Fixes: 7ce875e5 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error") Reported-by:DaeRyong Jeong <threeearcat@gmail.com> Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Or Gerlitz authored
When dealing with ingress rule on a netdev, if we did fine through the conventional path, there's no need to continue into the egdev route, and we can stop right there. Not doing so may cause a 2nd rule to be added by the cls api layer with the ingress being the egdev. For example, under sriov switchdev scheme, a user rule of VFR A --> VFR B will end up with two HW rules (1) VF A --> VF B and (2) uplink --> VF B Fixes: 208c0f4b ('net: sched: use tc_setup_cb_call to call per-block callbacks') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jason Wang authored
DaeRyong Jeong reports a race between vhost_dev_cleanup() and vhost_process_iotlb_msg(): Thread interleaving: CPU0 (vhost_process_iotlb_msg) CPU1 (vhost_dev_cleanup) (In the case of both VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE) ===== ===== vhost_umem_clean(dev->iotlb); if (!dev->iotlb) { ret = -EFAULT; break; } dev->iotlb = NULL; The reason is we don't synchronize between them, fixing by protecting vhost_process_iotlb_msg() with dev mutex. Reported-by:Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-05-24 This series includes two mlx5 fixes. 1) add FCS data to checksum complete when required, from Eran Ben Elisha. 2) Fix A race in IPSec sandbox QP commands, from Yossi Kuperman. Please pull and let me know if there's any problem. for -stable v4.15 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation") ==================== Signed-off-by: -
Willem de Bruijn authored
Commit b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") ensures that packet_snd always starts writing the link layer header in reserved headroom allocated for this purpose. This is needed because packets may be shorter than hard_header_len, in which case the space up to hard_header_len may be zeroed. But that necessary padding is not accounted for in skb->len. The fix, however, is buggy. It calls skb_push, which grows skb->len when moving skb->data back. But in this case packet length should not change. Instead, call skb_reserve, which moves both skb->data and skb->tail back, without changing length. Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") Reported-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
- 24 May, 2018 5 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Three fixes for vmwgfx. Two are cc'd stable and fix host logging and its error paths on 32-bit VMs. One is a fix for a hibernate flaw introduced with the 4.17 merge window. * 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Schedule an fb dirty update after resume drm/vmwgfx: Fix host logging / guestinfo reading error paths drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
-
Linus Torvalds authored
Merge branch 'stable/for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "One single fix in here: under Xen the DMA32 heap (in the hypervisor) would end up looking like swiss cheese. The reason being that for every coherent DMA allocation we didn't do the proper hypercall to tell Xen to return the page back to the DMA32 heap. End result was (eventually) no DMA32 space if you (for example) continously unloaded and loaded modules" * 'stable/for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
-
Yossi Kuperman authored
Sandbox QP Commands are retired in the order they are sent. Outstanding commands are stored in a linked-list in the order they appear. Once a response is received and the callback gets called, we pull the first element off the pending list, assuming they correspond. Sending a message and adding it to the pending list is not done atomically, hence there is an opportunity for a race between concurrent requests. Bind both send and add under a critical section. Fixes: bebb23e6 ("net/mlx5: Accel, Add IPSec acceleration interface") Signed-off-by:
Yossi Kuperman <yossiku@mellanox.com> Signed-off-by:
Adi Nissim <adin@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Eran Ben Elisha authored
When RXFCS feature is enabled, the HW do not strip the FCS data, however it is not present in the checksum calculated by the HW. Fix that by manually calculating the FCS checksum and adding it to the SKB checksum field. Add helper function to find the FCS data for all SKB forms (linear, one fragment or more). Fixes: 102722fc ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "This is pretty much just the usual array of smallish driver bugs. - remove bouncing addresses from the MAINTAINERS file - kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers - various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers - two fixes for patches already sent during the merge window - a long-standing bug related to not decreasing the pinned pages count in the right MM was found and fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits) RDMA/hns: Move the location for initializing tmp_len RDMA/hns: Bugfix for cq record db for kernel IB/uverbs: Fix uverbs_attr_get_obj RDMA/qedr: Fix doorbell bar mapping for dpi > 1 IB/umem: Use the correct mm during ib_umem_release iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()' RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint RDMA/i40iw: Avoid reference leaks when processing the AEQ RDMA/i40iw: Avoid panic when objects are being created and destroyed RDMA/hns: Fix the bug with NULL pointer RDMA/hns: Set NULL for __internal_mr RDMA/hns: Enable inner_pa_vld filed of mpt RDMA/hns: Set desc_dma_addr for zero when free cmq desc RDMA/hns: Fix the bug with rq sge RDMA/hns: Not support qp transition from reset to reset for hip06 RDMA/hns: Add return operation when configured global param fail RDMA/hns: Update convert function of endian format RDMA/hns: Load the RoCE dirver automatically RDMA/hns: Bugfix for rq record db for kernel RDMA/hns: Add rq inline flags judgement ...
-
