Don't need all the network sysfs code if CONFIG_SYSFS is not enabled.
Also:
	* netdev_sysfs_unregister is declaration mismatch
	* if netdev_sysfs_register fails print a warning.
	  Need to still mark it as registered so the unregister_netdevice works,
	  but we will probably end up leaking memory in that case.

As the comment in the code suggests, nobody really uses this so nobody
will notice the difference :) Still, let's make it correct while we're
at it.

1) Add sysctl to control rcvbuf moderation, off for now.
2) Set default winscale to zero.

into nuts.davemloft.net:/disk1/BK/net-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

SGI Modid: xfs-linux:xfs-kern:172618a

SGI Modid: xfs-linux:xfs-kern:172649a

ia64: Implement race-free ptep_set_access_flags()

Signed-off-by: davidm@hpl.hp.com
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes a typo in the low level platform code that puts to sleep and
wakes up the USB cell.  This fixes a problem when pmdisk is used on
those machines (pmdisk patch not merged yet, soon maybe...)

From: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Since Intel agreed to submit further updates via broken-up patches
like they do currently (and admirably) for e1000 and e100, I agreed
to merge this update to bring the driver up to speed.

Contributed by: Ayyappan.Veeraiyan@intel.com

Changes:

Features implemented

*	Support for new 850nm adapters.
*	Copyright notice updated to include year 2004.
*	Fix for "ixgb does not maintain non-default MTU setting across a
link loss" issue - When link loss happens in non-default MTU
environment, driver will incorrectly operate with default 1500 MTU
setting.
*	Netpoll support added
*	Ethtool support - status functionality, FlowControl interface,
Checksum interface, TSO and Scatter Gather interfaces
*	Race condition fix - Race condition (TX path) exists between
ixgb_xmit_frame and clean_tx_irq routines in handling the queue.
* 	Removed dead code segments (#if 0)


Performance improvement features 
*	Mod operator usage is removed - used to cause performance
problems in non-IA architecture based machines
*	Multiple ICR register read in ISR is avoided
*	RS bit set on only 'end of packet' TX descriptors - to avoid
multiple writebacks by controller for packets with multiple descriptors.
*	RX descriptors prefetch is done - improved 1500 MTU TX
performance


All relevant e1000 driver cleanups ported to ixgb
*	Valid error propagation in functions ixgb_up, ixgb_probe,
ixgb_open. 
* 	NAPI code cleanups
* 	u8, u16 and u32 data types are changed to uint8_t, uint16_t and
uint32_t respectively. We use these types on our shared code for
multiple OSes and also to make it uniform with e1000 driver.
*	Some functions in ixgb_main.c are moved to different location -
This enables easy porting of e1000 bug fixes to ixgb 

into redhat.com:/spare/repo/net-drivers-2.6

into redhat.com:/spare/repo/net-drivers-2.6

into redhat.com:/spare/repo/net-drivers-2.6

into redhat.com:/spare/repo/net-drivers-2.6

into redhat.com:/spare/repo/net-drivers-2.6

into redhat.com:/spare/repo/net-drivers-2.6

into redhat.com:/spare/repo/net-drivers-2.6

into redhat.com:/spare/repo/net-drivers-2.6

From: Jeff Lightfoot <jeffml@pobox.com>

The following patch to net/sk98lin/skvpd.c was put together by Marc Bouget,
mbouget at club-internet.fr.

This patch works around a corrupt EEPROM (VPD?) in the ASUS K8V Deluxe SE
motherboard ethernet chipset and allows the network driver to work
correctly.  We have written to ASUS and the sk98lin maintainers but have
not heard anything back.

Found another patch that should go with this batch:

Switch to netdev_priv(). Fix outdated comment and bump version number
while we're at it.

Replace USE_MEM and USE_IO with USE_MMIO define.

- Switch to 8 char tabs.
- Remove kernel log pointer to the scyld web site -- it's
  a) fairly irrelevant by now and
  b) gone.
- Remove Emacs Voodoo.
- More white space clean up, mostly coding style.

This patch renames symbols:
via_rhine_* -> rhine_*
struct netdev_private *np -> struct rhine_private *rp

Lucas Nussbaum and Dirk Koeppen each found independently that the code
for forcing media options in via-rhine is borked and suggested the fix
below. I've been sitting on this way too long because there is more
badness in the immediate vicinity which needs a bigger surgery.

The second hunk fixes a braino I managed to introduce myself.

Joe Perches pointed out an error in patch 8.  As I looked at the results
closer 3 out of 4 looked correct.  This fixes the output for the last
case.  Output is now the same on IA32 and PPC64 hardware.

the Broadcom BCM4401 driver restores pci configuration on resume only when the 
device is up. On my notebook, this leads to a failure when the device is down 
during the S3 cycle. Short solution for now: Always restore pci config.

Also included are driver version update and change logs