- 10 May, 2012 1 commit
-
-
Cong Wang authored
THIS_MODULE is NULL only when drbd is compiled as built-in, so the #ifdef CONFIG_MODULES should be #ifdef MODULE instead. This fixes the warning: drivers/block/drbd/drbd_main.c: In function ‘drbd_buildtag’: drivers/block/drbd/drbd_main.c:4187:24: warning: the comparison will always evaluate as ‘true’ for the address of ‘__this_module’ will never be NULL [-Waddress] Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com>
-
- 09 May, 2012 39 commits
-
-
Philipp Reisner authored
It got lost with the commit 5a7bbad2 "block: remove support for bio remapping from ->make_request" Signed-off-by:
-
Lars Ellenberg authored
Don't rely on availability of bios from the global fs_bio_set, we should use our own bio_set for meta data IO. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Arne Redlich authored
If bm_page_async_io is advised to use a new page for I/O (BM_AIO_COPY_PAGES is set), it will get it from a mempool. Once the mempool has to dip into its reserves the page is not reinitialized, i.e. page->private contains garbage, which will lead to various problems once the I/O completes (dereferences of NULL pointers, the submitting thread getting stuck in D-state, ...). Signed-off-by:
Arne Redlich <arne.redlich@googlemail.com> Signed-off-by:
-
Lars Ellenberg authored
Conflicts: drbd/drbd_bitmap.c Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Symptom: messages similar to "FIXME asender in bm_change_bits_to, bitmap locked for 'write from resync_finished' by worker" If a resync or verify is finished (or aborted), a full bitmap writeout is triggered. If we have ongoing local IO, the bitmap may still change during that writeout, pending and not yet processed acks may cause bits to be cleared, while new writes may cause bits to be to be set. To fix this, introduce the drbd_bm_write_copy_pages() variant. Signed-off-by:
-
Lars Ellenberg authored
When a resync or online verify is finished or aborted, drbd does a bulk write-out of changed bitmap pages. If *in that very moment* a new verify or resync is triggered, this can race: ASSERT( !test_bit(BITMAP_IO, &mdev->flags) ) in drbd_main.c FIXME going to queue 'set_n_write from StartingSync' but 'write from resync_finished' still pending? and similar. This can be observed with e.g. tight invalidate loops in test scripts, and probably has no real-life implication. Still, that race can be solved by first quiescen the device, before starting a new resync or verify. Signed-off-by:
-
Lars Ellenberg authored
DRBD can freeze IO, due to fencing policy (fencing resource-and-stonith), or because we lost access to data (on-no-data-accessible suspend-io). Resuming from there (re-connect, or re-attach, or explicit admin intervention) should "just work". Unfortunately, if the re-attach/re-connect did not happen within the timeout, since the commit drbd: Implemented real timeout checking for request processing time if so configured, the request_timer_fn() would timeout and detach/disconnect virtually immediately. This change tracks the most recent attach and connect, and does not timeout within <configured timeout interval> after attach/connect. Signed-off-by:
-
Philipp Reisner authored
This could be exploited by a peer which runs modified code. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Philipp Reisner authored
Changes to the role and disk state should be delayed or rejected while we establish a connection. This is necessary, since the peer will base its resync decision on the UUIDs and the state we sent in the drbd_connect() function. The most prominent example for this race is becoming primary after sending state and UUIDs and before the state changes to C_WF_CONNECTION. Signed-off-by:
-
Lars Ellenberg authored
One invocation in the endio handler is good enough, we don't need mention it for each of the different ways it calls __req_mod(). Signed-off-by:
-
Lars Ellenberg authored
Just because this request happened during a resync does not mean it may pretend to have been barrier-acked. Signed-off-by:
-
Lars Ellenberg authored
READ_RETRY_REMOTE_CANCELED needs to be grouped with the other _CANCELED cases, not with CONNECTION_LOST_WHILE_PENDING, as that would complete (fail) the bio even if the device became suspended. Signed-off-by:
-
Lars Ellenberg authored
OOS_HANDED_TO_NETWORK should not be grouped with the various *_CANCELED/*_FAILED cases. Also, not only clear the RQ_NET_QUEUED flag, but also mark it RQ_NET_DONE, so it can be distinguished from a local-only request even after that. Signed-off-by:
-
Lars Ellenberg authored
We used to have a barrier implementation where barrier_nr 0 was reserved. That is long gone. Just use the full sequence space. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
We assumed only bios with bi_idx == 0 would end up in drbd_make_request(). That is wrong. At least device mapper, in __clone_and_map(), may submit clones only covering a partial bio, but sharing the original bvec, by adjusting bi_idx and relevant other bio members of the clone. We used __bio_for_each_segment() in various places, even though that is documented as * drivers should not use the __ version unless they _really_ want to * run through the entire bio and not just pending pieces Impact: we would send the full bio bvec, even for the clone with bi_idx > 0, which will cause data corruption on the peer (because we submit wrong data at the clone offset), and will cause a DRBD protocol error, disconnect/reconnect and resync (thus fixing the corruption), because the next package header would be expected right in the middle of the sent data, causing DRBD magic mismatch. Fix: drop the assert, and use bio_for_each_segment() instead of the __ version. Conflicts: drbd/drbd_tracing.c Signed-off-by:
-
Philipp Reisner authored
If a SyncTarget node gets a P_RS_DATA_REPLY before a P_DATA packet for the same sector, it simply submits these two IO requests. This is be possible because on the SyncSource node, the data of the P_RS_DATA_REPLY packet was read from disk. Immediately after that a write request from upper layers came in. The disk scheduler or even the "hardware" queues on the disk drive might reorder these writes. Signed-off-by:
-
Philipp Reisner authored
When we have a write request and a state change C_WF_BITMAP_S -> C_SYNC_SOURCE at the same time, and it happens that the line remote = remote && drbd_should_do_remote(s); stills sees C_WF_BITMAP_S, and send_oos = rw == WRITE && drbd_should_send_oos(s); already sees C_SYNC_SOURCE both are 0. This causes the write to not be mirrored, but marked as out-of-sync on the Sync_Source node. Signed-off-by:
-
Lars Ellenberg authored
Without this, iostat frequently sees bogus svctime and >= 100% "utilization". Signed-off-by:
-
Lars Ellenberg authored
drbd_accept was modelled after kernel_accept with drbd commit 53eb779 in July 2008. Only, kernel_accept was then broken, and only fixed later with kernel commit 1b08534e in Dec 2008: net: Fix module refcount leak in kernel_accept() Impact: protocol families provided as modules, e.g. ipv6 or ib_sdp, would soon have their reference count become negative, preventing them from being unloaded (likely), or worse, hit zero without actually being unused, allowing them to be unloaded while still in use (unlikely, but if triggered, causing a kernel crash). Signed-off-by:
-
Philipp Reisner authored
If the backing device is already frozen during attach, we failed to recognize that. The current disk-timeout code works on top of the drbd_request objects. During attach we do not allow IO and therefore never generate a drbd_request object but block before that in drbd_make_request(). This patch adds the timeout to all drbd_md_sync_page_io(). Before this patch we used to go from D_ATTACHING directly to D_DISKLESS if IO failed during attach. We can no longer do this since we have to stay in D_FAILED until all IO ops issued to the backing device returned. Signed-off-by:
-
Philipp Reisner authored
I.e. in C_WF_REPORT_PARAMS or in C_WF_CONNECTION. Sending may already work in these cstates, but the peer still expects the HandShake / ConnectionFeatures packet. Actually triggered by the Testuite on kugel. Signed-off-by:
-
Lars Ellenberg authored
If the asender thread, or request_timer_fn(), or some other part of the code, decided to drop the connection (because of timeout or other), but the receiver just now was processing a P_STATE packet, there was a chance that receive_state() would do a hard state change "re-establishing" an already failed connection without additional handshake. Log excerpt: Remote failed to finish a request within ko-count * timeout peer( Secondary -> Unknown ) conn( Connected -> Timeout ) pdsk( UpToDate -> DUnknown ) asender terminated ... peer( Unknown -> Secondary ) conn( Timeout -> Connected ) pdsk( DUnknown -> UpToDate ) peer_isp( 0 -> 1 ) ... Connection closed peer( Secondary -> Unknown ) conn( Connected -> Unconnected ) pdsk( UpToDate -> DUnknown ) peer_isp( 1 -> 0 ) receiver terminated Impact: while the connection state is erroneously "Connected", requests may be queued and even sent, which would never be acknowledged, and may have been missed by the cleanup. These requests would never be completed. The next drbd_suspend_io() will then lock up, waiting forever for these requests to complete. Fixed in several code paths: Make sure the connection state is NetworkFailure or worse before starting the cleanup in drbd_disconnect(). This should make sure the cleanup won't miss any requests. Disallow receive_state() to "upgrade" the connection state from an error state. This will make sure the "illegal" state transition won't happen. For all connection failure states, relax the safe-guard in sanitize_state() again to silently mask out those state changes (e.g. Timeout -> Connected becomes Timeout -> Timeout). Signed-off-by:
-
Lars Ellenberg authored
drbd_try_clear_on_disk_bm() has a sanity check for the number of blocks left to be resynced (rs_left) in the current resync extent. If it detects a mismatch, it complains, and forces a disconnect using drbd_force_state(mdev, NS(conn, C_DISCONNECTING)); Unfortunately, this may be called while holding the req_lock, and drbd_force_state() want's to aquire that lock itself. Deadlock. Don't force a disconnect, but fix up rs_left by recounting and reassigning the number of dirty blocks in that extent. Signed-off-by:
-
Philipp Reisner authored
This bug might have caused troubles if disk-barriers and the ahead-behind more are enabled at the same time. Signed-off-by:
-
Lars Ellenberg authored
DRBD state changes schedule after_state_ch() actions to a worker thread, which decides on the old and new states of that change, whether to send an informational state update packet (P_STATE) to the peer. If it decides to drbd_send_state(), it would however always send the _curent_ state, which, if a second state change happens before the after_state_ch() of the first ran, may "fast-forward" the peer's view about this node. In most cases that is harmless, but sometimes this can confuse DRBD, for example into not actually starting a necessary resync if you do a very tight detach/attach loop on a Connected Secondary. Fix this by always sending the "new" state of the respective state transition which scheduled this after_state_ch() work. Signed-off-by:
-
Lars Ellenberg authored
When detaching, even cleanly detaching due to administrator request, we always go through D_FAILED before we become D_DISKLESS. Don't let that state change race with an in-flight meta data IO, or that one might think it actually experienced an IO error. Signed-off-by:
-
Philipp Reisner authored
drbd_state_lock() is only there to serialize cluster wide state changes. Testing the local disk state needs to happen while holding the global_state_lock. Otherwise you might see something like this (Oct 6 on kugel) 14:20:24 drbd0: conn( WFSyncUUID -> Connected ) disk( Inconsistent -> Failed ) 14:20:24 drbd0: helper command: /sbin/drbdadm before-resync-target minor-0 exit code 0 (0x0) 14:20:24 drbd0: conn( Connected -> SyncTarget ) disk( Failed -> Inconsistent ) Signed-off-by:
-
Lars Ellenberg authored
We have one pre-allocated page to do certain synchronous meta data IO with, using it is serialized like so: drbd_md_get_buffer(); drbd_md_sync_page_io(); drbd_md_sync_page_io(); ... drbd_md_put_buffer(); In drbd_md_sync_page_io() there is an ASSERT(atomic_read(&mdev->md_io_in_use) == 1); We want to be able to timeout on unresponsive lower level devices, so we can "detach" in that case. Inside drbd_md_sync_page_io() we grab an extra reference, to not have a dangling pointer in case a delayed IO eventually does still complete, even after we "detached" already. We need to put the extra reference before we signal completion from the completion handler, or the second drbd_md_sync_page_io() above may trigger the assert (reference count still 2). Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Lars Ellenberg authored
With sync-after dependencies, given "lucky" timing of pause/unpause events, and the end of an empty (0 bits set) resync was sometimes not detected on the SyncTarget, leading to a "stalled" SyncSource state. Fixed this by expecting not only "Inconsistent -> UpToDate" but also "Consistent -> UpToDate" transitions for the peer disk state to end a resync. Signed-off-by:
-
Philipp Reisner authored
If we get into the C_BROKEN_PIPE cstate once, the state engine set the thi->t_state of the receiver thread to restarting. But with the while loop in drbdd_init() a new connection gets established. After the call into drbdd() returns immediately since the thi->t_state is not RUNNING. The restart of drbd_init() then resets thi->t_state to RUNNING. I.e. after entering C_BROKEN_PIPE once, the next successful established connection gets wasted. The two parts of the fix: * Do not cause the thread to restart if we detect the issue with the sockets while we are in C_WF_CONNECTION. * Make sure that all actions that would have set us to C_BROKEN_PIPE happen before the state change to C_WF_REPORT_PARAMS. Signed-off-by: -
Philipp Reisner authored
Signed-off-by:
-
