Remove the kernel message noise during the attach of the board.
Use a simple/clean dev_info at the end of the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix defines to comply with style guidelines
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DEVICE_NODE not used
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix msec_delay_bp macro formatting
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver no longer walks the pci bus to find the pci_dev.
The pci_dev_put() is no longer needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These comments are pretty obvious. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro relies on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is now optional, remove it. The
boardinfo is also not needed now so remove it also.

This also allows removing the icp_multi.h header completely.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the kernel message noise during the attach of the board.
Use a simple/clean dev_info at the end of the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This board always has 5 subdevices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver always supports interrupts.
Remove the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog inputs and outputs for this driver use the same table
to set the analog range. Remove the boardinfo for it and just
reference the table directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one board type supported by this driver and the
analog input ranges are constant. Remove the boardinfo for it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog inputs of this board always have 12-bit resolution.
Remove the boardinfo and just open-code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog outputs of this board always have 12-bit resolution.
Remove the boardinfo and just open-code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog inputs for this board always support differential
inputs and the number of channels is half the normal analog
input number.

Remove the n_aichand field from the boardinfo and fix the code
accordingly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one board type supported by this driver and the
number of analog input channels is constant. Remove the
boardinfo for it and just open-code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one board type supported by this driver and the
number of analog output channels is constant. Remove the
boardinfo for it and just open-code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one board type supported by this driver and the
number of digital input channels is constant. Remove the
boardinfo for it and just open-code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one board type supported by this driver and the
number of digital output channels is constant. Remove the
boardinfo for it and just open-code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one board type supported by this driver and the
number of counter channels is constant. Remove the boardinfo
for it and just open-code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define enables a bunch of function trace messages. These
should be removed in the final driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is for a PCI device not a legacy device.

Convert it from a module_comedi_driver to a module_comedi_pci_driver.
This will allow using the comedi_pci_auto_config mechanism to attach
to the device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This way we do no longer need to keep a dangling pointer to struct
ipack_device in tpci200_slot after the device has been removed.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As the IP module driver takes care of freeing its resources.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is not needed as the IP module should free its IRQ using
tpci200_free_irq callback.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As the ipack_bus_unregister() takes care of unregistering the devices plugged
in the carrier, it is not needed to do it in the carrier driver.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Find the IP modules that are plugged to the carrier and unregister them.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As the IRQ was requested by the driver, it should free it also.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ipoctal devices can be uninstalled from the ipack_driver_unregister()
call as the device model calles the bus's .remove() function for each device
registered by the driver and it will execute the .remove() function of the
ipoctal driver.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using the call to the ipack_device_unregister() function to avoid the
strange way it was doing, as the device model will take care of calling
the bus's .remove function when a device is being unregistered.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As indicated in the documentation of pci_dev_get.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move iounmap and pci_release_region to tpci200_unregister(), as it is the place
where the clean-up of the device is done.

Also, renamed iounmap() to pci_iounmap() as the mapped region was requested
from PCI bus.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We check the CRC and store the result of the check in struct ipac_device.
A warning is emitted if the check fails.  However we leave it to the
IPack module device to refuse to initialize due to a bad CRC.  I have seen
otherwise good modules with bad CRCs.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Resetting the previous timeout we avoid to read the timeout status register
and see timeout errors that don't correspond to the present state of the
device.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reading the ID space at 8 MHz is always supported.  Most carriers will
boot up in 8MHz mode.  Still, play it safe and ensure we are operating at
8Mhz.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As the linked list was removed before, delete the useless struct list_head
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>