- 23 Dec, 2010 20 commits
-
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Andrew Vasquez authored
The semantics we employ now in the driver, performing a BIG_HAMMER in the event of Get-ID (0x20) mailbox command failing, should only be done for FC. On FC configurations, it makes sense since advertising is only really performed once, so a BIG_HAMMER to reinitiate the process is needed to restart. Under FCoE, this is not needed, as there's a continous stream of advertisements/ACks at the protocol layer to initiate a relogin/reinitialization process. Signed-off-by:
-
Joe Carnuccio authored
For driver module parameters that have permission bits set to (S_IRUGO|S_IRUSR), remove the second term since it is already included in the first term. S_IRUGO comes defined as (S_IRUSR|S_IRGRP|S_IROTH). Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by:
-
Madhuranath Iyengar authored
Signed-off-by:
Swapnil Nagle <swapnil.nagle@qlogic.com> Signed-off-by:
Karen Higgins <karen.higgins@qlogic.com> Signed-off-by:
-
Madhuranath Iyengar authored
The FCP priority info was not being updated properly in certain situations. Here are the changes that needs to be done to take care of this issue: 1. No need to check fcport->state for FCS_UNCONFIGURED in qla24xx_update_fcport_fcp_prio(), since an invalid loop id check is already performed which is sufficient. 2. Add the missing qla24xx_update_fcport_fcp_prio() function call within qla2x00_update_fcport() function, so that the priority info is updated on every port addition or change. 3. Perform proper adapter types checking. 4. Other changes, associated with DEBUG/printk's and parameter passing. Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
Fixed the incorrect zero test on array new_config[]. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Dan Carpenter authored
This is just a cleanup. The unneeded NULL check annoys static checkers because we already derefenced it and the we check it and then (if it's not the _safe() version) we dereference it again without checking. And the static checker is all, "Wah? Is it null or not?" Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Saurav Kashyap authored
Support is added for quiescence mode. This feature is for P3P adapters. Any of the functions can put the firmware into quiescence state. All the others have to ack that request. During quiescence mode current commands are processed and all the new incoming I/Os are blocked. Loop resync is performed after firmware comes out of quiescence state. Signed-off-by:
-
adam radford authored
The following patch updates the Documentation/scsi/ChangeLog.megaraid_sas file. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
adam radford authored
This patch adds MegaRAID 9265/9285 (Device id 0x5b) specific code Signed-off-by:
-
adam radford authored
The following patch adds struct megasas_instance_template changes to the megaraid_sas driver, and changes all code to use the new instance entries: irqreturn_t (*service_isr )(int irq, void *devp); void (*tasklet)(unsigned long); u32 (*init_adapter)(struct megasas_instance *); u32 (*build_and_issue_cmd) (struct megasas_instance *, struct scsi_cmnd *); void (*issue_dcmd) (struct megasas_instance *instance, struct megasas_cmd *cmd); Signed-off-by: -
adam radford authored
The following patch modifies the megaraid_sas driver to select the lowest memory bar available so the driver will work in SR-IOV VF environments where the memory bar mapping changes. Signed-off-by:
-
adam radford authored
This patch adds MSI-X support and 'msix_disable' module parameter to the megaraid_sas driver. Signed-off-by:
-
FUJITA Tomonori authored
Modify allocation to try the minimum possible page order allowed by the HBA scatter/gather segment limit in allocation of the driver's internal buffer. This increases the probability of successful allocation. The allocation may still fail if this minimum order is > 0. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Reported-by:
Lukas Kolbe <lkolbe@techfak.uni-bielefeld.de> Signed-off-by:
-
Kai Makisara authored
The order of the pages allocated for the driver buffer must be stored before allocation because it is used in freeing already allocated pages if allocation fails. Signed-off-by:
-
Douglas Gilbert authored
set resid to the requested data-in length when a MEDIUM ERROR is simulated. This implies no valid data is returned in the data-in buffer Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
James Bottomley authored
Our current handling of medium error assumes that data is returned up to the bad sector. This assumption holds good for all disk devices, all DIF arrays and most ordinary arrays. However, an LSI array engine was recently discovered which reports a medium error without returning any data. This means that when we report good data up to the medium error, we've reported junk originally in the buffer as good. Worse, if the read consists of requested data plus a readahead, and the error occurs in readahead, we'll just strip off the readahead and report junk up to userspace as good data with no error. The fix for this is to have the error position computation take into account the amount of data returned by the driver using the scsi residual data. Unfortunately, not every driver fills in this data, but for those who don't, it's set to zero, which means we'll think a full set of data was transferred and the behaviour will be identical to the prior behaviour of the code (believe the buffer up to the error sector). All modern drivers seem to set the residual, so that should fix up the LSI failure/corruption case. Reported-by:
-
- 21 Dec, 2010 20 commits
-
-
Nicholas Bellinger authored
This patch adds a handful of missing CDBs defs that are used by TCM persistent reservation logic in the SPC-4 defined CDB exclusion table for registrations and reservations. This includes a number of missing MI_* and MO_* prefixed service actions defs for MAINTENANCE_IN and MAINTENANCE_OUT that are mentioned wrt to persistent registration and reservation status for the SCSI Initiator Port. Signed-off-by:
Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
adam radford authored
This patch updates the GPL headers in megaraid_sas_base.c and megaraid_sas.h. Signed-off-by:
-
adam radford authored
This patch renames megaraid_sas.c to megaraid_sas_base.c to facilitate other files in the compile. Signed-off-by:
-
Hillf Danton authored
It seems that zero should be returned if scsi_target_is_busy(starget) is true, no matter if sdev is on the starved list. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Menny Hamburger authored
Currently, when scsi_dh_activate() returns with an error (e.g. SCSI_DH_NOSYS) the activate_complete callback is not called and the error is not propagated to DM mpath. When a SCSI device attached to a device handler is deleted, userland processes currently performing I/O on the device will have their I/O hang forever. - Set SCSI_DH_NOSYS error when the handler is in the process of being deleted (e.g. the SCSI device is in a SDEV_CANCEL or SDEV_DEL state). - Set SCSI_DH_DEV_OFFLINED error when device is in SDEV_OFFLINE state. - Call the activate_complete callback function directly from scsi_dh_activate if an error has been set (when either the scsi_dh internal data has already been deleted or is in the process of being deleted). The patch was tested in an iSCSI environment, RDAC H/W handler and multipath. In the following reproduction process, dd will I/O hang forever and the only way to release it will be to reboot the machine: 1) Perform I/O on a multipath device: dd if=/dev/dm-0 of=/dev/zero bs=8k count=1000000 & 2) Delete all slave SCSI devices contained in the mpath device: I) In an iSCSI environment, the easiest way to do this is by stopping iSCSI: /etc/init.d/iscsi stop II) Another way to delete the devices is by applying the following bash scriptlet: dm_devs=$(ls /sys/block/ | grep dm- | xargs) for dm_dev in $dm_devs; do devices=$(ls /sys/block/$dm_dev/slaves) for device in $devices; do echo 1 > /sys/block/$device/device/delete done done NOTE: when DM mpath's fail_path uses blk_abort_queue this scsi_dh change isn't strictly required. However, DM mpath's call to blk_abort_queue will soon be reverted because it has proven to be unsafe due to a race (between blk_abort_queue and scsi_request_fn) that can lead to list corruption. Therefore we cannot rely on blk_abort_queue via fail_path, but even if we could this scsi_dh change is still preferrable. Signed-off-by:Menny Hamburger <Menny_Hamburger@Dell.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Reviewed-by:
Babu Moger <babu.moger@lsi.com> Signed-off-by:
-
Stephen M. Cameron authored
Otherwise, after doing a RAID level migration, the disk will be disruptively removed and re-added as a different disk on rescan. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Stephen M. Cameron authored
The firmware may have been updated, in which case, it's the same device, and in that case, we do not want to remove and add the device, we want to let it continue as is. Signed-off-by:
-
James Smart authored
Signed-off-by:
Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Updated commands used for ELS to utilize VPI Allocate RPI at node creation time and pass in ELS commnads. Signed-off-by:
-
James Smart authored
Implement new SLI4 init procedures based on if_type: - Add structure changes for new SLIPORT registers and BAR changes. - Update register names to be consistent with inteface spec terms. - Added union to encapsulate Hardward error registers. - Rework lpfc_sli4_post_status_check() around SLI-4's SLI_INTF type - Removed the lpfc_sli4_fw_cfg_check routine - Segmented driver logic to include evaluation of the if_type to engage different behaviors. Signed-off-by:
-
James Smart authored
Implement the FC and SLI async event handlers: - Updated MQ_CREATE_EXT mailbox structure to include fc and SLI async events. - Added the SLI trailer code. - Split physical field into type and number to reflect latest SLI spec. - Changed lpfc_acqe_fcoe to lpfc_acqe_fip to reflect latest Spec changes. - Added lpfc_acqe_fc_la structure for FC link attention async events. - Added lpfc_acqe_sli structure for sli async events. - Added lpfc_sli4_async_fc_evt routine to handle fc la async events. - Added lpfc_sli4_async_sli routine to handle sli async events. - Moved LPFC_TRAILER_CODE_FC to be handled by its own handler function. Signed-off-by:
-
James Smart authored
- Use for iocbq->context1 to hold the ndlp pointer. - Set ndlp in all iocbs generated from ioctl functions. - Turn parity and serr bits back on after performing sli4 board reset. Signed-off-by:
-
Krishna Gudipati authored
Signed-off-by:
Krishna Gudipati <kgudipat@brocade.com> Signed-off-by:
-
Krishna Gudipati authored
Fix iotag handling: 1) Update and check io tag for retry case. 2) Clearing upper 3 bits in io tag when an IO completes. The 3 upper bits in io tags are used for counting FCP exchange retry. Un-cleared bits will cause firmware to access invalid memory when the same io tag is used for an IO to a target that doesn't support FCP exchange retry. 3) Only check the effective bits when validating an iotag. Other minor fixes: 1) Added trace to get FC header type with assert of unhandled packet received. Ignore the type FC_TYPE_FC_FSS (FC_XS). 2) Fixed the adapter info display check - to check for fcmode flag even. Signed-off-by:
-
Krishna Gudipati authored
- Direct attach is not working due to the check of PID in fcxp_send request. - Added logic to set the lps->lp_pid with the PID assigned for n2n mode. Signed-off-by:
-
Krishna Gudipati authored
- Made IOC auto_recovery synchronized and not timer based. - Only one PCI function will attempt to recover and reinitialize the ASIC on a failure, after all the active PCI fns acknowledge the IOC failure. Signed-off-by:
-
Krishna Gudipati authored
When the bfa driver is loaded a flogi is sent without the knowledge of trunking configuration. This normal flogi causes the switch ports which had trunking enabled to go to persistent offline. Solution is to store the port configuration (which has trunking info) in the flash for persistency. The firmware will read this configuration when the very first fcport enable is received. Signed-off-by:
-
Krishna Gudipati authored
- Move fw trace save logic to bfa_ioc_sm_fail_entry(), so that fw trace is saved irrespective of the cause of the failure. - Make bfa_ioc_sm_fail() a failure parking state. - Rename bfa_ioc_sm_initfail() to a more appropriate bfa_ioc_sm_fail_retry() as it is no longer a parking state. Signed-off-by:
-
Maggie Zhang authored
Remove unused functions and fix checkpatch errors. Misc cleanups in comment and formatting. Signed-off-by:
Maggie Zhang <xmzhang@brocade.com> Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
Maggie Zhang authored
Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h. Signed-off-by:
-
