- 31 May, 2018 3 commits
-
-
Chris Wilson authored
Since we use i915_gem_find_active_request() from inside intel_engine_dump() and may call that at any time, we do not guarantee that the engine is paused nor that the signal kthreads and irq handler are suspended, so we cannot assert that the breadcrumb doesn't advance and that the irq hasn't happened on another CPU signaling the request we believe to be idle. The second assert removed (that request->engine == engine) remains valid, but is now more rigorously checked during retirement. Fixes: f636edb2 ("drm/i915: Make i915_engine_info pretty printer to standalone") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180529132922.6831-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit cc7cc534) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
This reverts commit dc911f5b. Per the report, no matter what display mode you select with xrandr, the i915 driver will always select the alternate fixed mode. For the reporter this means that the display will always run at 40Hz which is quite annoying. This may be due to the mode comparison. But there are some other potential issues. The choice of alt_fixed_mode seems dubious. It's the first non-preferred mode, but there are no guarantees that the only difference would be refresh rate. Similarly, there may be more than one preferred mode in the probed modes list, and the commit changes the preferred mode selection to choose the last one on the list instead of the first. (Note that the probed modes list is the raw, unfiltered, unsorted list of modes from drm_add_edid_modes(), not the pretty result after a drm_helper_probe_single_connector_modes() call.) Finally, we already have eerily similar code in place to find the downclock mode for DRRS that seems like could be reused here. Back to the drawing board. Note: This is a hand-crafted revert due to conflicts. If it fails to backport, please just try reverting the original commit directly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105469Reported-by:
Rune Petersen <rune@megahurts.dk> Reported-by:
Mark Spencer <n7u4722r35@ynzlx.anonbox.net> Fixes: dc911f5b ("drm/i915/edp: Allow alternate fixed mode for eDP if available.") Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180516080110.22770-1-jani.nikula@intel.com (cherry picked from commit d93fa1b4) Signed-off-by:
-
Chris Wilson authored
Make sure that when we don't have any scheduler attributes for the request, the string is terminated. Fixes: 247870ac ("drm/i915: Build request info on stack before printk") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180517152824.11619-1-chris@chris-wilson.co.uk (cherry picked from commit 96d4f03c) Signed-off-by:
-
- 17 May, 2018 3 commits
-
-
Laurent Pinchart authored
Commit 75a07f39 ("drm: rcar-du: Zero-out sg_tables when duplicating plane state") introduced a reference to the alpha field of struct rcar_du_vsp_plane_state that got removed in commit 301a9b8d ("drm/rcar-du: Convert to the new generic alpha property"). The issue stems from the merge of the two commits through separate branches and breaks compilation of the driver. Fix it. Fixes: 75a07f39 ("drm: rcar-du: Zero-out sg_tables when duplicating plane state") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515174752.28954-1-laurent.pinchart+renesas@ideasonboard.com
-
Laurent Pinchart authored
The rcar_du_of_init() function is supposed to be defined as a stub when CONFIG_DRM_RCAR_LVDS is disabled as the rcar_du_of.c file isn't compiled in that case. However, a bug in the configuration option check makes it a stub when CONFIG_DRM_RCAR_LVDS=m as well, which prevents legacy DTs from being fixed at boot time. Fix the configuration option check by using IS_ENABLED. Fixes: 81c0e3dd ("drm: rcar-du: Fix legacy DT to create LVDS encoder nodes") Signed-off-by:
-
Stephen Rothwell authored
Fixes: 5ae0283e ("drm/amdgpu: Add userptr support for KFD" Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 15 May, 2018 34 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Main changes for 4.18. I'd like to do a separate pull for vega20 later this week or next. Highlights: - Reserve pre-OS scanout buffer during init for seemless transition from console to driver - VEGAM support - Improved GPU scheduler documentation - Initial gfxoff support for raven - SR-IOV fixes - Default to non-AGP on PowerPC for radeon - Fine grained clock voltage control for vega10 - Power profiles for vega10 - Further clean up of powerplay/driver interface - Underlay fixes - Display link bw updates - Gamma fixes - Scatter/Gather display support on CZ/ST - Misc bug fixes and clean ups [airlied: fixup v3d vs scheduler API change] Link: https://patchwork.freedesktop.org/patch/msgid/20180515185450.1113-1-alexander.deucher@amd.comSigned-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Last drm/i915 changes for v4.18: - NV12 enabling (Chandra, Maarten) - ICL workarounds (Oscar) - ICL basic DPLL enabling (Paulo) - GVT updates - DP link config refactoring (Jani) - Module parameter to override DMC firmware (Jani) - PSR updates (José, DK, Daniel, Ville) - ICL DP vswing programming (Manasi) - ICL DBuf slice updates (Mahesh) - Selftest fixes and updates (Chris, Matthew, Oscar) - Execlist fixes and updates (Chris) - Stolen memory first 4k fix (Hans de Goede) - wait_for fixes (Mika) - Tons of GEM improvements (Chris) - Plenty of other fixes and improvements (Everyone) - Crappy changelog (Me) Signed-off-by:
-
Nayan Deshmukh authored
this patch also effect the amdgpu and etnaviv drivers which use the function drm_sched_entity_init Signed-off-by:
Nayan Deshmukh <nayan26deshmukh@gmail.com> Suggested-by:
Christian König <christian.koenig@amd.com> Acked-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com>
-
Dirk Hohndel authored
This is dual licensed under GPL-2.0 or MIT. Signed-off-by:
Dirk Hohndel (VMware) <dirk@hohndel.org> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Acked-by:
-
Christian König authored
Quite useful to know. Signed-off-by:
-
Christian König authored
It is meaningless anyway. v2: remove unused variable (Alex) Signed-off-by:
-
Yong Zhao authored
This change prepares for a workaround in amdkfd for a GFX9 HW bug. It requires the control stack memory of compute queues, which is allocated from the second page of MQD gart BOs, to have mtype NC, rather than the default UC. Signed-off-by:
Yong Zhao <yong.zhao@amd.com> Reviewed-by:
-
Mikita Lipski authored
Functionality to message smc to enable pwe after gpu suspense. It is used in case when display resumes from S3 and wants to start audio driver by enabling pwe. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Acked-by:
-
Shirish S authored
This patch is in continuation to the "843e3c7d drm/amd/display: defer modeset check in dm_update_planes_state" where we started to eliminate the dependency on DRM_MODE_ATOMIC_ALLOW_MODESET to be set by the user space, which as such is not mandatory. After deferring, this patch eliminates the dependency on the flag for overlay planes. This has to be done in stages as its a pretty complex and requires thorough testing before we free primary planes as well from dependency on modeset flag. V2: Simplified the plane type check. Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Junwei Zhang authored
fix crash in trace. Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
-
Alex Deucher authored
These got moved to the new df module so no longer used in this file. Reviewed-by:
-
Christian König authored
The UVD firmware doesn't seem to like the HDP flush here. This worked for years without HDP flush, so just skip it. Signed-off-by:
-
Junwei Zhang authored
Signed-off-by:
David Zhou <david1.zhou@amd.com> Reviewed-by:
-
Junwei Zhang authored
Then priority could be set before initialization. By default, it requires to kzalloc ttm bo. In fact, we always do so. Signed-off-by:
-
Rex Zhu authored
The performance drop if the default TDP more than 256 Watt Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
under manual dpm mode, user can set gfx/mem clock through sysfs pp_dpm_sclk/mclk on Rv. Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Junwei Zhang authored
Used for working around an audio bug on some platforms. Signed-off-by:
-
Colin Ian King authored
The declaration of pointer amdgpu_crtc has a redundant assignment to amdgpu_crtc. Clean this up by removing it. Detected by CoverityScan, CID#1460299 ("Evaluation order violation") Reviewed-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in PP_ASSERT_WITH_CODE message text Signed-off-by:
-
Rex Zhu authored
In order to keep consist with Vega, the output format of the pp_power_profile_mode would be <integer><mode name string>< “*” for current profile>:"detail settings" and remove the "CURRENT" mode line. for example: NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING: 10 0 30 - - - 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM *: 0 5 30 0 100 10 NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING *: 10 0 30 0 100 10 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM: - - - - - - Reviewed-by:
-
Chunming Zhou authored
Shadow BO is located on GTT and its parent (PT and PD) BO could located on VRAM. In some case, the BO on GTT could be evicted but the parent did not. This may cause the shadow BO not be put in the evict list and could not be invalidate correctly. v2: suggested by Christian Signed-off-by:
Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by:
-
Chunming Zhou authored
Signed-off-by:
-
Tom St Denis authored
Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Tom St Denis authored
The callback .emit_reg_write_reg_wait was missing for vcn decode which resulted in a kernel oops. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Rex Zhu authored
with dpm enabled, need to get active crtcs in dc/no-dc mode. caused by 'commit ebb649667a31 ("drm/amdgpu: Set pm_display_cfg in non-dc mode")' Reviewed-by: -
Rex Zhu authored
With powerplay enabled, also need to skip fan attributes if no fan present. Reviewed-by:
-
Andrey Grodzovsky authored
v2: Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT) Avoid printing error message for ERESTARTSYS Originally-by:
David Panariti <David.Panariti@amd.com> Signed-off-by:
-
Michel Dänzer authored
GFP_TRANSHUGE tries very hard to allocate huge pages, which can result in long delays with high memory pressure. I have observed firefox freezing for up to around a minute due to this while restic was taking a full system backup. Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT | __GFP_NORETRY instead, in order to fail quickly when there are no huge pages available. Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed up in the background if necessary. With these changes, I'm no longer seeing freezes during a restic backup. Cc: stable@vger.kernel.org Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Shirish S authored
FBC is not applicable for the underlay pipe, hence disallow enabling and disabling of the same. This also fixes the BUG hit of calling sleep in atomic context. Signed-off-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
Michel Dänzer authored
Allocating up to 32 physically contiguous pages can easily fail (and has failed for me), and isn't necessary anyway. Reviewed-by:
-
Xiaojie Yuan authored
Fix the NULL pointer dereference while running amdgpu_test: [ 54.972246] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 54.972265] IP: (null) [ 54.972273] PGD 0 P4D 0 [ 54.972280] Oops: 0010 [#1] SMP PTI [ 54.972288] Modules linked in: amdkfd amd_iommu_v2 amdgpu(OE) chash gpu_sched ttm drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep intel_rapl snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq snd_seq_device kvm irqbypass snd_timer crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd soundcore joydev input_leds aesni_intel aes_x86_64 crypto_simd glue_helper cryptd idma64 virt_dma mei_me intel_lpss_pci serio_raw intel_cstate intel_rapl_perf shpchp intel_pch_thermal mei mac_hid intel_lpss acpi_pad parport_pc ppdev nfsd lp auth_rpcgss nfs_acl lockd grace sunrpc parport autofs4 hid_generic [ 54.972434] usbhid mxm_wmi e1000e psmouse ahci hid libahci wmi pinctrl_sunrisepoint video pinctrl_intel [ 54.972457] CPU: 6 PID: 1393 Comm: uvd Tainted: G OE 4.16.0-rc7-27fb84fda777 #1 [ 54.972473] Hardware name: MSI MS-7984/Z170 KRAIT GAMING (MS-7984), BIOS B.80 05/11/2016 [ 54.972489] RIP: 0010: (null) [ 54.972497] RSP: 0018:ffffaea002c8bcc0 EFLAGS: 00010202 [ 54.972508] RAX: 0000000000000000 RBX: ffff9d30d3c56f60 RCX: 00000000007c0002 [ 54.972522] RDX: 000000000001a6fb RSI: 000000000001a6e9 RDI: ffff9d30d3c56f60 [ 54.972536] RBP: ffffaea002c8bd10 R08: 0000000000000002 R09: ffffffffc06977d0 [ 54.972550] R10: 0000000000000040 R11: 0000000000000000 R12: 0000000000000002 [ 54.972564] R13: ffff9d30d3c5001c R14: ffff9d30d3c50000 R15: 0000000000000006 [ 54.972579] FS: 0000000000000000(0000) GS:ffff9d30eed80000(0000) knlGS:0000000000000000 [ 54.972594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.972606] CR2: 0000000000000000 CR3: 00000002dbc0a001 CR4: 00000000003606e0 [ 54.972620] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 54.972634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 54.972648] Call Trace: [ 54.972685] ? gmc_v9_0_emit_flush_gpu_tlb+0x111/0x140 [amdgpu] [ 54.972721] uvd_v7_0_ring_emit_vm_flush+0x31/0x70 [amdgpu] [ 54.972751] amdgpu_vm_flush+0x5dc/0x6c0 [amdgpu] [ 54.972787] ? pp_dpm_powergate_uvd+0x50/0x80 [amdgpu] [ 54.972816] amdgpu_ib_schedule+0x120/0x4e0 [amdgpu] [ 54.972850] amdgpu_job_run+0x17b/0x1c0 [amdgpu] [ 54.972861] drm_sched_main+0x2cc/0x490 [gpu_sched] [ 54.972873] ? wait_woken+0x80/0x80 [ 54.972882] kthread+0x121/0x140 [ 54.972891] ? drm_sched_job_finish+0xf0/0xf0 [gpu_sched] [ 54.972902] ? kthread_create_worker_on_cpu+0x70/0x70 [ 54.972914] ret_from_fork+0x35/0x40 [ 54.972922] Code: Bad RIP value. [ 54.972932] RIP: (null) RSP: ffffaea002c8bcc0 [ 54.972943] CR2: 0000000000000000 [ 54.972951] ---[ end trace 5feb349263bbf633 ]--- Signed-off-by:
Xiaojie Yuan <Xiaojie.Yuan@amd.com> Reviewed-by:
-
Harry Wentland authored
The two ranges overlap. Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Jerry (Fangzhi) Zuo authored
Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
