- 04 Feb, 2019 2 commits
-
-
Takashi Iwai authored
We should pass a proper non-NULL device object to memory allocators although it was accepted in the past. The card->dev points to the most appropriate device object in such a case, so let's put it. Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We should pass a proper non-NULL device object to memory allocators although it was accepted in the past. The card->dev points to the most appropriate device object in such a case, so let's put it. Acked-by:
-
- 01 Feb, 2019 3 commits
-
-
Takashi Iwai authored
We used to pass NULL to memory allocators for ISA devices due to historical reasons. But we prefer rather a proper device object to be assigned, so let's fix it by replacing snd_dma_isa_data() call with card->dev reference, and kill snd_dma_isa_data() definition. Reviewed-by:
-
Christoph Hellwig authored
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Also use GFP_KERNEL instead of GFP_USER as the gfp_t for the memory allocation, as we should treat this allocation as a normal kernel one. Signed-off-by:
-
Christoph Hellwig authored
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Signed-off-by:
-
- 31 Jan, 2019 1 commit
-
-
Guennadi Liakhovetski authored
Declaration of snd_pcm_drop() in sound/core/pcm_native.c is superfluous since the function isn't called before being defined. Remove the declaration. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
- 29 Jan, 2019 7 commits
-
-
Takashi Iwai authored
Currently the registration and free of beep input device was done manually from the register and the disconnect callbacks of the assigned codec object. This seems working in most cases, but this may be a cause of some races at probe. Moreover, due to these manual calls, the total code became unnecessarily lengthy. This patch rewrites the beep registration code to follow the standard sound device object style. This allows us reducing the code, in addition to avoiding the nested device registration calls. Signed-off-by: -
Takashi Iwai authored
Pull HD-audio PM fixes. They are applied on top of the latest 5.0 development branch. Signed-off-by: -
Takashi Iwai authored
The init sequence for ALC294 headphone stuff is needed not only for the boot up time but also for the resume from hibernation, where the device is switched from the boot kernel without sound driver to the suspended image. Since we record the PM event in the device power_state field, we can now recognize the call pattern and apply the sequence conditionally. Signed-off-by: -
Takashi Iwai authored
Currently we deal with single codec and suspend codec callbacks for all S3, S4 and runtime PM handling. But it turned out that we want distinguish the call patterns sometimes, e.g. for applying some init sequence only at probing and restoring from hibernate. This patch slightly modifies the common PM callbacks for HD-audio codec and stores the currently processed PM event in power_state of the codec's device.power field, which is currently unused. The codec callback can take a look at this event value and judges which purpose it's being called. Signed-off-by: -
Kailang Yang authored
Fix hp_pin always no value. [More notes on the changes: The hp_pin value that is referred in alc294_hp_init() is always zero at the moment the function gets called, hence this is actually useless as in the current code. And, this kind of init sequence should be called from the codec init callback, instead of the parser function. So, the first fix in this patch to move the call call into its own init_hook. OTOH, this function is needed to be called only once after the boot, and it'd take too long for invoking at each resume (where the init callback gets called). So we add a new flag and invoke this only once as an additional fix. The one case is still not covered, though: S4 resume. But this change itself won't lead to any regression in that regard, so we leave S4 issue as is for now and fix it later. -- tiwai ] Fixes: bde1a745 ("ALSA: hda/realtek - Fixed headphone issue for ALC700") Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jussi Laako authored
XMOS/Thesycon family of USB Audio Class firmware flags DSD altsetting separate from the PCM ones. Thus the DSD altsetting can be auto-detected based on the flag and doesn't need maintaining specific altsetting whitelist. In addition, static VID:PID-to-altsetting whitelisting causes problems when firmware update changes the altsetting, or same VID:PID is reused for another device that has different kind of firmware. This patch removes existing explicit whitelist mappings for XMOS VID (0x20b1) and Thesycon VID (0x152a). Also corrects placement of Hegel HD12 and NuPrime DAC-10 to keep list sorted based on VID. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
-
Takashi Iwai authored
Pull 5.0 branch for further development of USB-audio quirks Signed-off-by:
-
- 28 Jan, 2019 1 commit
-
-
Takashi Sakamoto authored
Duende Classic was produced by Solid State Logic in 2006, as a first model of Duende DSP series. The following model, Duende Mini was produced in 2008. They are designed to receive isochronous packets for PCM frames via IEEE 1394 bus, perform signal processing by downloaded program, then transfer isochronous packets for converted PCM frames. These two models includes the same embedded board, consists of several ICs below: - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer - Altera MAX 3000A CPLD for programs - Analog devices, SHARC ADSP-21363 for signal processing (4 chips) This commit adds support for the two models to ALSA dice driver. Like support for the other devices, packet streaming is just available. Userspace applications should be developed if full features became available; e.g. program uploader and parameter controller. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 349771402425, 'cmc': True, 'cyc_clk_acc': 255, 'generation': 1, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 20674, 'pmc': False}, 'root-directory': [ ['VENDOR', 20674], ['DESCRIPTOR', 'Solid State Logic'], ['MODEL', 112], ['DESCRIPTOR', 'Duende board'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': True}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 20674], ['VERSION', 1], ['MODEL', 112], ['DESCRIPTOR', 'Duende board']]]]} Signed-off-by:Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
- 25 Jan, 2019 4 commits
-
-
Takashi Iwai authored
When the trigger=off is passed for a PCM OSS stream, it sets the start_threshold of the given substream to the boundary size, so that it won't be automatically started. This can be problematic for a capture stream, unfortunately, as detected by syzkaller. The scenario is like the following: - In __snd_pcm_lib_xfer() that is invoked from snd_pcm_oss_read() loop, we have a check whether the stream was already started or the stream can be auto-started. - The function at this check returns 0 with trigger=off since we explicitly disable the auto-start. - The loop continues and repeats calling __snd_pcm_lib_xfer() tightly, which may lead to an RCU stall. This patch fixes the bug by simply allowing the wait for non-started stream in the case of OSS capture. For native usages, it's supposed to be done by the caller side (which is user-space), hence it returns zero like before. (In theory, __snd_pcm_lib_xfer() could wait even for the native API usage cases, too; but I'd like to stay in a safer side for not breaking the existing stuff for now.) Reported-by: syzbot+fbe0496f92a0ce7b786c@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: -
Olek Poplavsky authored
This patch adds quirk VID/PID IDs for the Opus #3 DAP (made by 'The Bit') in order to enable Native DSD support. [ NOTE: this could be handled in the generic way with fp->dvd_raw if we add 0x10cb to the vendor whitelist, but since 0x10cb shows a different vendor name (Erantech), put to the individual entry at this time -- tiwai ] Signed-off-by:
Olek Poplavsky <woodenbits@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
An open-coded error path in __snd_pcm_lib_xfer() can be replaced with the simple goto to the common error path. This also makes the error handling more consistent, i.e. when some samples have been already processed, return that size instead of the error code. Signed-off-by: -
Dan Carpenter authored
The > should be >= or otherwise we potentially read one element beyond the end of the ff->tx_midi_substreams[] array. Fixes: 73f5537f ("ALSA: fireface: support tx MIDI functionality of Fireface UCX") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- 24 Jan, 2019 5 commits
-
-
Takashi Iwai authored
Pull PCM lock refactoring. Signed-off-by: -
Takashi Iwai authored
This patch changes the parent pointer assignment of snd_info_entry object to be always non-NULL. More specifically,check the parent argument in snd_info_create_module_entry() & co, and assign snd_proc_root if NULL is passed there. This assures that the proc object is always freed when the root is freed, so avoid possible memory leaks. For example, some error paths (e.g. snd_info_register() error at snd_minor_info_init()) may leave snd_info_entry object although the proc file itself is freed. Signed-off-by: -
Takashi Iwai authored
The proc files are recursively freed by calling with the root snd_info_entry object, so we don't have to keep each object for releasing one by one. Move the release of the PCM stream proc root at the beginning, so that we can remove the redundant code and resource. Signed-off-by: -
Takashi Iwai authored
It's assigned but nowhere used. Let's remove it. Signed-off-by: -
Takashi Sakamoto authored
In Fireface series, registration of higher 4 bytes of destination address for asynchronous transaction of MIDI messages is done by a write transaction to model-specific register. On the other hand, registration of lower 4 bytes of the address is selectable from 4 options. A register for this registration includes the other purpose options such as input attenuation. Thus this driver expects userspace applications to configure the register. Actual behaviour for the asynchronous transaction is different depending on protocols. In former protocol, destination offset of each transaction is the same as the registered address even if it is block request. In latter models, destination offset of each transaction is the offset of previous transaction plus 4 byte and the transaction is quadlet request. This commit cleanups comments about the above mechanism. Signed-off-by:
-
- 23 Jan, 2019 3 commits
-
-
Takashi Iwai authored
After the previous code refactoring, the PCM stream locking code became nothing but the PCM group lock with self_group object. Use the existing helper function for simplifying the code. Signed-off-by: -
Takashi Iwai authored
Remove the hackish down_write_nonfifo() that was introduced as a workaround of rwsem deadlock. It used to be a problem for non-atomic PCM streams that take the rwsem for the locking and hit the high lock contention. Since the current PCM locking refactoring, we'll no longer hit it as the hot code-paths don't take global locks. Signed-off-by: -
Takashi Iwai authored
We have currently two global locks, a rwlock and a rwsem, that are used for managing linking the PCM streams. Due to these global locks, once when a linked stream is used, the lock granularity suffers a lot. This patch attempts to eliminate the former global lock for atomic ops. The latter rwsem needs remaining because of the loosy way of the loop calls in snd_pcm_action_nonatomic(), as well as for avoiding the deadlock at linking. However, these are used far rarely, actually only by two actions (prepare and reset), where both are no timing critical ones. So this can be still seen as a good improvement. The basic strategy to eliminate the rwlock is to assure group->lock at adding or removing a stream to / from the group. Since we already takes the group lock whenever taking the all substream locks under the group, this shouldn't be a big problem. The reference to group pointer in snd_pcm_substream object is protected by the stream lock itself. However, there are still pitfalls: a race window at re-locking and the lifecycle of group object. The former is a small race window for dereferencing the substream group object opened while snd_pcm_action() performs re-locking to avoid ABBA deadlocks. This includes the unlink of group during that window, too. And the latter is the kfree performed after all streams are removed from the group while it's still dereferenced. For addressing these corner cases, two new tricks are introduced: - After re-locking, the group assigned to the stream is checked again; if the group is changed, we retry the whole procedure. - Introduce a refcount to snd_pcm_group object, so that it's freed only when it's empty and really no one refers to it. (Some readers might wonder why not RCU for the latter. RCU in this case would cost more than refcounting, unfortunately. We take the group lock sooner or later, hence the performance improvement by RCU would be negligible. Meanwhile, because we need to deal with schedulable context depending on the pcm->nonatomic flag, it'll become dynamic RCU/SRCU switch, and the grace period may become too long.) Along with these changes, there are a significant amount of code refactoring. The complex group re-lock & ref code is factored out to snd_pcm_stream_group_ref() function, for example. Signed-off-by:
-
- 22 Jan, 2019 12 commits
-
-
Takashi Sakamoto authored
In latter model of Fireface series, asynchronous transaction includes a prefix byte to indicate the way to decode included MIDI bytes. Upper 4 bits of the prefix byte indicates port number, and the rest 4 bits indicate the way to decode rest of bytes for MIDI messages. Basically the rest bits indicates the number of bytes for MIDI message. However, if the last byte of each MIDi message is included, the rest bits are 0xf. For example: message: f0 00 00 66 14 20 00 00 f7 offset: content (big endian, port 0) '0030: 0x02f00000 '0030: 0x03006614 '0030: 0x03200000 '0030: 0x0ff70000 This commit supports encoding scheme for the above and allows applications to transfer MIDI messages via ALSA rawmidi interface. An unused member (running_status) is reused to keep state of transmission of system exclusive messages. For your information, this is a dump of config rom. $ sudo ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'bmc': False, 'chip_ID': 13225063715, 'cmc': False, 'cyc_clk_acc': 0, 'imc': False, 'isc': True, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 2613}, 'root-directory': [ [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 2613], ['DESCRIPTOR', 'RME!'], ['EUI_64', 2873037108442403], [ 'UNIT', [ ['SPECIFIER_ID', 2613], ['VERSION', 4], ['MODEL', 1054720], ['DESCRIPTOR', 'Fireface UCX']]]]} Signed-off-by: -
Takashi Sakamoto authored
Between former and latter models, content of asynchronous transaction for MIDI messages from driver to device is different. This commit is a preparation to support latter models. A protocol-specific operation is added to encode MIDI messages to the transaction. Signed-off-by:
-
Takashi Sakamoto authored
ALSA: fireface: add model-dependent parameter for address to receive async transaction for MIDI messages Between former and latter models, destination address to receive asynchronous transactions for MIDI messages is different. This commit adds model-dependent parameter for the addresses. Signed-off-by:
-
Takashi Sakamoto authored
Fireface UCX transfers asynchronous transactions for MIDI messages. One transaction includes quadlet data therefore it can transfer 3 message bytes as maximum. Base address of the destination is configured by two settings; a register for higher 8 byte of the address, and a bitflag to option register indicates lower 8byte. The register for higher address is 0x'ffff'0000'0034. Unfortunately, firmware v24 includes a bug to ignore registered value for the destination address and transfers to 0x0001xxxxxxxx always. This driver doesn't work well if the bug exists, therefore users should install the latest firmware (v27). The bitflag is a part of value to be written to option register (0x'ffff'0000'0014). lower addr: bitflag (little endian) '0000'0000: 0x00002000 '0000'0080: 0x00004000 '0000'0100: 0x00008000 '0000'0180: 0x00010000 This register includes more options but they are not relevant to packet streaming or MIDI functionality. This driver don't touch it. Furthermore, the transaction is sent to address offset incremented by 4 byte to the offset in previous time. When it reaches base address plus 0x7c, next offset is the base address. Content of the transaction includes a prefix byte. Upper 4 bits of the byte indicates port number, and the rest 4 bits indicate the way to decode rest of bytes for MIDI message. Except for system exclusive messages, the rest bits are the same as status bits of the message without channel bits. For system exclusive messages, the rest bits are encoded according to included message bytes. For example: message: f0 7e 7f 09 01 f7 offset: content (little endian, port 0) '0000: 0x04f07e7f '0004: 0x070901f7 message: f0 00 00 66 14 20 00 00 00 f7 offset: content (little endian, port 1) '0014: 0x14f00000 '0018: 0x14661420 '001c: 0x14000000 '0020: 0x15f70000 message: f0 00 00 66 14 20 00 00 f7 offset: content (little endian, port 0) '0078: 0x04f00000 '007c: 0x04661420 '0000: 0x070000f7 This commit supports decoding scheme for the above and allows applications to receive MIDI messages via ALSA rawmidi interface. The lower 8 bytes of destination address is fixed to 0x'0000'0000, thus this driver expects userspace applications to configure option register with bitflag 0x00002000 in advance. Signed-off-by:
-
Takashi Sakamoto authored
In Fireface series, drivers can register destination address for asynchronous transaction which transfers MIDI messages from device. In former models, all of the transactions arrive at the registered address without any offset. In latter models, each of the transaction arrives at the registered address with sequential offset within 0x00 to 0x7f. This seems to be for discontinuity detection. This commit adds model-dependent member for the address range. Signed-off-by:
-
Takashi Sakamoto authored
In a series of Fireface, devices transfer asynchronous transaction with MIDI messages. In the transaction, content is different depending on models. ALSA fireface driver has protocol-dependent handler to pick up MIDI messages from the content. In latter models of the series, the transaction is transferred to range of address sequentially. This seems to check continuity of transferred messages. This commit changes prototype of the handler to receive offset of address for received transactions. Signed-off-by:
-
Sameer Pujar authored
AZX_DCAPS_PM_RUNTIME flag is added to indicate support for runtime PM. azx_has_pm_runtime() is used to check if above is enabled and thus forbid runtime PM calls if needed. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Reviewed-by:
Ravindra Lokhande <rlokhande@nvidia.com> Reviewed-by:
Mohan Kumar D <mkumard@nvidia.com> Signed-off-by:
-
Sameer Pujar authored
This patch moves clock enable/disable from system resume/suspend to runtime resume/suspend respectively. Along with this hda controller chip init or stop is also moved. System resume/suspend can invoke runtime callbacks and do necessary setup. chip->running can be used to check for probe completion and device access during runtime_resume or runtime_suspend can be avoided if probe is not yet finished. This helps to avoid kernel panic during boot where runtime PM callbacks can happen from system PM. Signed-off-by:
-
Sameer Pujar authored
Explicit clock enable is not required during probe, as this would be managed by runtime PM calls. Clock can be enabled/disabled in runtime resume/suspend. This way it is easier to balance clock enable/disable counts. Signed-off-by:
-
Sameer Pujar authored
This patch adds skeleton of runtime suspend and resume callbacks. Signed-off-by:
-
Sameer Pujar authored
Moved devm_clk_get() API calls to a separate function and the same can be called early in the probe. This is done before runtime PM for the device is enabled. The runtime resume/suspend callbacks can later enable/disable clocks respectively(the support would be added in subsequent patches). Clock handles should be available by the time runtime suspend/resume calls can happen. Signed-off-by:
-
Sameer Pujar authored
This patch enables runtime power management(runtime PM) support for hda. pm_runtime_enable() and pm_runtime_disable() are added during device probe and remove respectively. The runtime PM callbacks will be forbidden if hda controller does not have support for runtime PM. pm_runtime_get_sync() and pm_runtime_put() are added for hda register access. The callbacks for above will be added in subsequent patches. Signed-off-by:
-
- 21 Jan, 2019 2 commits
-
-
Takashi Iwai authored
The snd_pcm_group_for_each_entry() loop found in snd_pcm_unlink() is only for taking the first list entry. Use list_first_entry() to make clearer. Signed-off-by: -
Takashi Iwai authored
Make a common helper to re-assign the PCM link using list_move() instead of open code with manual list_del() and list_add_tail(). This assures the consistency and we can get rid of snd_pcm_group.count field -- its purpose is only to check whether the list is singular, and we can know it by list_is_singular() call now. Signed-off-by:
-
