- 08 Nov, 2022 15 commits
-
-
Colin Ian King authored
Variable 'unit_serial_len' is just being assigned and it's never used anywhere else. Remove it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221101105326.31037-1-colin.i.king@gmail.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Variable 'n' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
-
Colin Ian King authored
Variable 'found_devs' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
-
Bart Van Assche authored
Fix the following two compiler warnings: drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’: drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 171 | uint8_t bail; | ^~~~ drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’: drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 2023 | uint8_t bail; | ^~~~ Cc: Arun Easi <arun.easi@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Fixes: feafb7b1 ("[SCSI] qla2xxx: Fix vport delete issues") Signed-off-by:Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Since commit f93ed747 ("scsi: core: Release SCSI devices synchronously") it is no longer allowed to call scsi_device_put() from atomic context. Rework bfad_reset_sdev_bflags() such that scsi_device_put() is no longer called. This fixes the following smatch warning: drivers/scsi/bfa/bfad_bsg.c:2551 bfad_iocmd_lunmask_reset_lunscan_mode() warn: sleeping in atomic context bfad_iocmd_lunmask() <- disables preempt -> bfad_iocmd_lunmask_reset_lunscan_mode() -> scsi_device_put() Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Before modifying bfad_reset_sdev_bflags(), convert it from a macro into a function. Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
-
Bart Van Assche authored
Move a scsi_device_put() call from alua_rtpg_select_sdev() to its callers. Fixes the following smatch complaint: drivers/scsi/device_handler/scsi_dh_alua.c:853 alua_rtpg_select_sdev() warn: sleeping in atomic context alua_rtpg_work() <- disables preempt -> alua_rtpg_select_sdev() -> scsi_device_put() Cc: Hannes Reinecke <hare@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
-
Bart Van Assche authored
Fix the following smatch warning: drivers/scsi/device_handler/scsi_dh_alua.c:1013 alua_rtpg_queue() warn: sleeping in atomic context alua_check_vpd() <- disables preempt -> alua_rtpg_queue() -> scsi_device_put() Cc: Hannes Reinecke <hare@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Keoseong Park authored
Commit 68078d5c ("[SCSI] ufs: Set fDeviceInit flag to initiate device initialization") added check_upiu_size(), but no caller. Cc: Dolev Raviv <draviv@codeaurora.org> Link: https://lore.kernel.org/r/20221103055349epcms2p338f2550c2dd78d00231a83b24719a3d4@epcms2p3Signed-off-by:
Keoseong Park <keosung.park@samsung.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Nathan Chancellor authored
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/scsi/elx/libefc/efc_node.c:811:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] ctx->current_state = state; ^ ~~~~~ drivers/scsi/elx/libefc/efc_node.c:878:21: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] node->nodedb_state = state; ^ ~~~~~ drivers/scsi/elx/libefc/efc_node.c:905:6: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' from 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict] pf = node->nodedb_state; ^ ~~~~~~~~~~~~~~~~~~ drivers/scsi/elx/libefc/efc_device.c:455:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] node->nodedb_state = __efc_d_init; ^ ~~~~~~~~~~~~ drivers/scsi/elx/libefc/efc_sm.c:41:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] ctx->current_state = state; ^ ~~~~~ The type of the second parameter in the prototypes of ->current_state() and ->nodedb_state() ('u32') does not match the implementations, which have a second parameter type of 'enum efc_sm_event'. Update the prototypes to have the correct second parameter type, clearing up all the warnings and CFI failures. Link: https://github.com/ClangBuiltLinux/linux/issues/1750Reported-by:Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221102161906.2781508-1-nathan@kernel.orgReviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Bart Van Assche authored
Move the code for aborting all SCSI commands and TMFs into a new function. This patch makes the ufshcd_err_handler() easier to read. Except for adding more logging, this patch does not change any functionality. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Colin Ian King authored
Variable 'adapter_count' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
Khalid Aziz <khalid@gonehiking.org> Signed-off-by:
-
Colin Ian King authored
Variable 'where' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'the'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20221028133708.60030-1-yuanjilin@cdjrlc.comAcked-by:
Finn Thain <fthain@linux-m68k.org> Signed-off-by:
-
Keoseong Park authored
Use "if error return" style in ufshcd_hba_enable(). No functional change. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
- 27 Oct, 2022 13 commits
-
-
John Garry authored
I am soon leaving Huawei, so will no longer maintain this driver. However I will stay active in upstream Linux storage domain. Xiang Chen has worked on the driver for as long as I have and has good knowledge of the driver, so should do a good job. Signed-off-by:
John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1666784008-125519-1-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
In commit 0b639dec ("scsi: pm8001: Modify task abort handling for SATA task"), code was introduced to dereference "task" pointer in pm8001_abort_task(). However there was a pre-existing later check for "!task", which spooked the kernel test robot. Function pm8001_abort_task() should never be passed NULL for "task" pointer, so remove that check. Also remove the "unlikely" hint, as this is not fastpath code. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Bean Huo authored
UFS Boot and Device W-LUs do not have unit descriptors and RPMB does not support WB. Use is_visible() to control which nodes are visible and which are not. Signed-off-by:
Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20221025222430.277768-4-beanhuo@iokpp.deReviewed-by:
Arthur Simchaev <arthur.simchaev@wdc.com> Signed-off-by:
-
Bean Huo authored
Combine ufshcd_get_lu_power_on_wp_status() and ufshcd_set_queue_depth() into one single ufshcd_lu_init(), so that we only need to read the LUN descriptor once. Signed-off-by:
-
Bean Huo authored
Ccommit d3d9c457 ("scsi: ufs: Fix memory corruption by ufshcd_read_desc_param()") has properly fixed stack overflow issue. As a result, commit a2fca52e ("scsi: ufs: WB is only available on LUN #0 to #7") is no longer required. Revert it. Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Colin Ian King authored
Variable i is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by:
-
Peter Wang authored
WLUN suspend and resume events are currently not handled by ufshcd_print_evt_hist(). Add the missing events. Signed-off-by:
Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20221024120602.30019-1-peter.wang@mediatek.comReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Asutosh Das <quic_asutoshd@quicinc.com> Signed-off-by:
-
Dmitry Bogdanov authored
libiscsi tests check the support of DPO & FUA bits in usage bits of RSOC response. This patch adds support for dynamic usage bits for each opcode. Set support of DPO & FUA bits in usage_bits of RSOC response depending on support DPOFUA in the backstore device. Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20220906103421.22348-7-d.bogdanov@yadro.comReviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Dmitry Bogdanov authored
RECEIVE COPY RESULTS is an opcode from 3rd party copy command set and shall be rejected if emulate_3pc attribute is off like EXTENDED COPY. Reviewed-by:
-
Dmitry Bogdanov authored
Allow support for RSOC to be turned off via the emulate_rsoc attibute. This is just for testing purposes. Reviewed-by:
-
Dmitry Bogdanov authored
Report supported opcodes depending on a dynamic device configuration. Reviewed-by:
-
Dmitry Bogdanov authored
Fill the strucures for supported opcodes and usage bits that are reported in REPORT SUPPORTED OPERATION CODES command response. Reviewed-by:
-
Dmitry Bogdanov authored
Add support for REPORT SUPPORTED OPERATION CODES command according to SPC4. Reviewed-by:
-
- 22 Oct, 2022 12 commits
-
-
Bart Van Assche authored
The following deadlock has been observed on multiple test setups: * ufshcd_wl_suspend() is waiting for blk_execute_rq(START STOP UNIT) to complete while ufshcd_wl_suspend() holds host_sem. * The SCSI error handler is activated, changes the host state to SHOST_RECOVERY, ufshcd_eh_host_reset_handler() and ufshcd_err_handler() are called and the latter function tries to obtain host_sem. This is a deadlock because blk_execute_rq() can't execute SCSI commands while the host is in the SHOST_RECOVERY state and because the error handler cannot make progress because host_sem is held by another thread. Fix this deadlock as follows: * Fail attempts to suspend the system while the SCSI error handler is in progress by setting the SCMD_FAIL_IF_RECOVERING flag for START STOP UNIT commands. * If the system is suspending and a START STOP UNIT command times out, handle the SCSI command timeout from inside the context of the SCSI timeout handler instead of activating the SCSI error handler. The runtime power management code is not affected by this deadlock since hba->host_sem is not touched by the runtime power management functions in the UFS driver. Reviewed-by:
-
Bart Van Assche authored
Open-code scsi_execute() because a later patch will modify scmd->flags and because scsi_execute() does not support setting scmd->flags. No functionality is changed. Signed-off-by:
-
Bart Van Assche authored
Add a new boolean variable that tracks whether the system is suspending, suspended or resuming. This information will be used in a later commit to fix a deadlock between the SCSI error handler and the suspend code. Reviewed-by:
-
Bart Van Assche authored
Instead of only retrying the START STOP UNIT command if a unit attention is reported, repeat it if any SCSI error is reported by the device or if the command timed out. Signed-off-by:
-
Bart Van Assche authored
Reduce the START STOP UNIT command timeout to one second since on Android devices a kernel panic is triggered if an attempt to suspend the system takes more than 20 seconds. One second should be enough for the START STOP UNIT command since this command completes in less than a millisecond for the UFS devices I have access to. Signed-off-by:
-
Bart Van Assche authored
Convert if (ret) { ... } if (!ret) { ... } into if (ret) { ... } else { ... }. Reviewed-by: -
Bart Van Assche authored
Although the host lock had to be held by ufshcd_clk_scaling_start_busy() callers when that function was introduced, that is no longer the case today. Hence remove the comment that claims that callers of this function must hold the host lock. Reviewed-by:
-
Bart Van Assche authored
The current behavior for SCSI commands submitted while error recovery is ongoing is to retry command submission after error recovery has finished. See also the scsi_host_in_recovery() check in scsi_host_queue_ready(). Add support for failing SCSI commands while host recovery is in progress. This functionality will be used to fix a deadlock in the UFS driver. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
Commit 6600593c ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE") made it impossible for .eh_timed_out() implementations to call scsi_done() without causing a crash. Restore support for SCSI timeout handlers to call scsi_done() as follows: * Change all .eh_timed_out() handlers as follows: - Change the return type into enum scsi_timeout_action. - Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER. - Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED. * In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values. Reviewed-by:
Lee Duncan <lduncan@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
If there is a race between scsi_done() and scsi_timeout() and if scsi_timeout() loses the race, scsi_timeout() should not reset the request timer. Hence change the return value for this case from BLK_EH_RESET_TIMER into BLK_EH_DONE. Although the block layer holds a reference on a request (req->ref) while calling a timeout handler, restarting the timer (blk_add_timer()) while a request is being completed is racy. Reviewed-by:
-
Justin Tee authored
Update lpfc version to 14.2.0.8 Signed-off-by:
Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221017164323.14536-5-justintee8345@gmail.comSigned-off-by:
-
Justin Tee authored
The DUMP_MEMORY mailbox command is implemented for page A0 and A2 to retrieve transceiver information from firmware. The mailbox command output is then formatted to print raw data values for userspace to parse via sysfs. Signed-off-by:
-
