If a reset occurs after the scan work attempts to issue a command, the
reset may quisce the admin queue, which blocks the scan work's command
from dispatching. The scan work will not be able to complete while the
queue is quiesced.

Meanwhile, the reset work will cancel all outstanding admin tags and
wait until all requests have transitioned to idle, which includes the
passthrough request. But the passthrough request won't be set to idle
until after the scan_work flushes, so we're deadlocked.

Fix this by handling the end effects after the request has been freed.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216354Reported-by: Jonathan Derrick <Jonathan.Derrick@solidigm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Prepare for storing the blkcg information in the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-18-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blkcg_schedule_throttle as part of moving the
blk-cgroup infrastructure to be gendisk based.  Remove the unused
!BLK_CGROUP stub while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-17-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blkg_destroy_all as part of moving the blk-cgroup
infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-16-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blk_throtl_cancel_bios as part of moving the
blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-15-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blk_throtl_register_queue as part of moving the
blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-14-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blk_throtl_init and blk_throtl_exit as part of moving
the blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-13-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use a local disk variable instead of retrieving the disk and
request_queue over and over by various means.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-12-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blk_iocost_init as part of moving the blk-cgroup
infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-11-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Just directly dereference the disk name instead of going through multiple
hoops to find the same value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-10-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blk_iolatency_init as part of moving the blk-cgroup
infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-9-hch@lst.de
[axboe: missed inline for blk_iolatency_init() and !CONFIG_BLK_CGROUP_IOLATENCY]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blk_ioprio_init and blk_ioprio_exit as part of moving
the blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-8-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the gendisk to blkcg_init_disk and blkcg_exit_disk as part of moving
the blk-cgroup infrastructure to be gendisk based.  Also remove the
rather pointless kerneldoc comments for these internal functions with a
single caller each.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-7-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The combinations of an error check with an ERR_PTR return and a lookup
with a NULL return leads to ugly handling of the return values in the
callers.  Just open coding the check and the lookup is much simpler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add a fully inlined blkg_lookup as the extra two checks aren't going
to generated a lot more code vs the call to the slowpath routine, and
open code the hint update in the two callers that care.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use blkg_lookup instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Just open code it in the only caller and drop the unused !BLK_CGROUP
stub.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

When blk_throtl_init fails, we need to call blk_ioprio_exit.  Switch to
proper goto based unwinding to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

High-performance NVMe devices usually support a large hw queues, which
ensures a 1:1 mapping of hctx and ctx. In this case there will be no
remote request, so we don't need to care about it.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1663731123-81536-1-git-send-email-liusong@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

"tg->has_rules" is extended to "tg->has_rules_iops/bps", thus bios that
don't need to be throttled can be checked accurately.

With this patch, bio will be throttled if:

1) Bio is read/write, and corresponding read/write iops limit exist.
2) If corresponding doesn't exist, corresponding bps limit exist and
bio is not throttled before.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921095309.1481289-3-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Currently, "tg->has_rules" and "tg->flags & THROTL_TG_HAS_IOPS_LIMIT"
both try to bypass bios that don't need to be throttled, however, they are
a little redundant and both not perfect:

1) "tg->has_rules" only distinguish read and write, but not iops and bps
   limit.
2) "tg->flags & THROTL_TG_HAS_IOPS_LIMIT" only check if iops limit
   exist, read and write is not distinguished, and bps limit is not
   checked.

tg->has_rules will extended to distinguish bps and iops in the following
patch. There is no need to keep the flag.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921095309.1481289-2-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

START_USER_RECOVERY and END_USER_RECOVERY are two new control commands
to support user recovery feature.

After a crash, user should send START_USER_RECOVERY, it will:
(1) check if (a)current ublk_device is UBLK_S_DEV_QUIESCED which was
    set by quiesce_work and (b)chardev is released
(2) reinit all ubqs, including:
    (a) put the task_struct and reset ->ubq_daemon to NULL.
    (b) reset all ublk_io.
(3) reset ub->mm to NULL.

Then, user should start a new process and send FETCH_REQ on each
ubq_daemon.

Finally, user should send END_USER_RECOVERY, it will:
(1) wait for all new ubq_daemons getting ready.
(2) update ublksrv_pid
(3) unquiesce the request queue and expect incoming ublk_queue_rq()
(4) convert ub's state to UBLK_S_DEV_LIVE

Note: we can handle STOP_DEV between START_USER_RECOVERY and
END_USER_RECOVERY. This is helpful to users who cannot start new process
after sending START_USER_RECOVERY ctrl-cmd.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-7-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

UBLK_F_USER_RECOVERY_REISSUE implies that:
With a dying ubq_daemon, ublk_drv let monitor_work requeues rq issued to
userspace(ublksrv) before the ubq_daemon is dying.

UBLK_F_USER_RECOVERY_REISSUE is designed for backends which:
(1) tolerate double-write since ublk_drv may issue the same rq
    twice.
(2) does not let frontend users get I/O error, such as read-only FS
    and VM backend.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-6-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

With USER_RECOVERY feature enabled, the monitor_work schedules
quiesce_work after finding a dying ubq_daemon. The monitor_work
should also abort all rqs issued to userspace before the ubq_daemon is
dying. The quiesce_work's job is to:
(1) quiesce request queue.
(2) check if there is any INFLIGHT rq. If so, we retry until all these
    rqs are requeued and become IDLE. These rqs should be requeued by
	ublk_queue_rq(), task work, io_uring fallback wq or monitor_work.
(3) complete all ioucmds by calling io_uring_cmd_done(). We are safe to
    do so because no ioucmd can be referenced now.
(5) set ub's state to UBLK_S_DEV_QUIESCED, which means we are ready for
    recovery. This state is exposed to userspace by GET_DEV_INFO.

The driver can always handle STOP_DEV and cleanup everything no matter
ub's state is LIVE or QUIESCED. After ub's state is UBLK_S_DEV_QUIESCED,
user can recover with new process.

Note: we do not change the default behavior with reocvery feature
disabled. monitor_work still schedules stop_work and abort inflight
rqs. And finally ublk_device is released.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-5-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

With recovery feature enabled, in ublk_queue_rq or task work
(in exit_task_work or fallback wq), we requeue rqs instead of
ending(aborting) them. Besides, No matter recovery feature is enabled
or disabled, we schedule monitor_work immediately.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-4-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Define some macros for recovery feature.

UBLK_S_DEV_QUIESCED implies that ublk_device is quiesced
and is ready for recovery. This state can be observed by userspace.

UBLK_F_USER_RECOVERY implies that:
(1) ublk_drv enables recovery feature. It won't let monitor_work to
    automatically abort rqs and release the device.
(2) With a dying ubq_daemon, ublk_drv ends(aborts) rqs issued to
    userspace(ublksrv) before crash.
(3) With a dying ubq_daemon, in task work and ublk_queue_rq(),
    ublk_drv requeues rqs.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-3-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This check is not atomic. So with recovery feature, ubq_daemon may be
modified simultaneously by recovery task. Instead, check 'current' is
safe here because 'current' never changes.

Also add comment explaining this check, which is really important for
understanding recovery feature.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-2-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.1/block

Pull MD updates and fixes from Song:

"1. Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan.
 2. Raid10 performance optimization, by Yu Kuai."

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: Fix spelling mistake in comments of r5l_log
  md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d
  md/raid10: convert resync_lock to use seqlock
  md/raid10: fix improper BUG_ON() in raise_barrier()
  md/raid10: prevent unnecessary calls to wake_up() in fast path
  md/raid10: don't modify 'nr_waitng' in wait_barrier() for the case nowait
  md/raid10: factor out code from wait_barrier() to stop_waiting_barrier()
  md: Remove extra mddev_get() in md_seq_start()
  md/raid5: Remove unnecessary bio_put() in raid5_read_one_chunk()
  md/raid5: Ensure stripe_fill happens on non-read IO with journal
  md/raid5: Don't read ->active_stripes if it's not needed
  md/raid5: Cleanup prototype of raid5_get_active_stripe()
  md/raid5: Drop extern on function declarations in raid5.h
  md/raid5: Refactor raid5_get_active_stripe()
  md: Replace snprintf with scnprintf
  md/raid10: fix compile warning
  md/raid5: Fix spelling mistakes in comments

Fix spelling of dones't in comments.
Signed-off-by: Zhou nan <zhounan@nfschina.com>
Signed-off-by: Song Liu <song@kernel.org>

A complicated deadlock exists when using the journal and an elevated
group_thrtead_cnt. It was found with loop devices, but its not clear
whether it can be seen with real disks. The deadlock can occur simply
by writing data with an fio script.

When the deadlock occurs, multiple threads will hang in different ways:

 1) The group threads will hang in the blk-wbt code with bios waiting to
    be submitted to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        ops_run_io+0x46b/0x1a30
        handle_stripe+0xcd3/0x36b0
        handle_active_stripes.constprop.0+0x6f6/0xa60
        raid5_do_work+0x177/0x330

    Or:
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        flush_deferred_bios+0x136/0x170
        raid5_do_work+0x262/0x330

 2) The r5l_reclaim thread will hang in the same way, submitting a
    bio to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        submit_bio+0x3f/0xf0
        md_super_write+0x12f/0x1b0
        md_update_sb.part.0+0x7c6/0xff0
        md_update_sb+0x30/0x60
        r5l_do_reclaim+0x4f9/0x5e0
        r5l_reclaim_thread+0x69/0x30b

    However, before hanging, the MD_SB_CHANGE_PENDING flag will be
    set for sb_flags in r5l_write_super_and_discard_space(). This
    flag will never be cleared because the submit_bio() call never
    returns.

 3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe()
    will do no processing on any pending stripes and re-set
    STRIPE_HANDLE. This will cause the raid5d thread to enter an
    infinite loop, constantly trying to handle the same stripes
    stuck in the queue.

    The raid5d thread has a blk_plug that holds a number of bios
    that are also stuck waiting seeing the thread is in a loop
    that never schedules. These bios have been accounted for by
    blk-wbt thus preventing the other threads above from
    continuing when they try to submit bios. --Deadlock.

To fix this, add the same wait_event() that is used in raid5_do_work()
to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will
schedule and wait until the flag is cleared. The schedule action will
flush the plug which will allow the r5l_reclaim thread to continue,
thus preventing the deadlock.

However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING
from the same thread and can thus deadlock if the thread is put to
sleep. So avoid waiting if md_check_recovery() is being called in the
loop.

It's not clear when the deadlock was introduced, but the similar
wait_event() call in raid5_do_work() was added in 2017 by this
commit:

    16d997b7 ("md/raid5: simplfy delaying of writes while metadata
                   is updated.")

Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.comSigned-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>

This patchset tries to avoid that two locks are held unconditionally
in hot path.

Test environment:

Architecture:
aarch64 Huawei KUNPENG 920
x86 Intel(R) Xeon(R) Platinum 8380

Raid10 initialize:
mdadm --create /dev/md0 --level 10 --bitmap none --raid-devices 4 \
    /dev/nvme0n1 /dev/nvme1n1 /dev/nvme2n1 /dev/nvme3n1

Test cmd:
(task set -c 0-15) fio -name=0 -ioengine=libaio -direct=1 -\
    group_reporting=1 -randseed=2022 -rwmixread=70 -refill_buffers \
    -filename=/dev/md0 -numjobs=16 -runtime=60s -bs=4k -iodepth=256 \
    -rw=randread

Test result:

aarch64:
before this patchset:           3.2 GiB/s
bind node before this patchset: 6.9 Gib/s
after this patchset:            7.9 Gib/s
bind node after this patchset:  8.0 Gib/s

x86:(bind node is not tested yet)
before this patchset: 7.0 GiB/s
after this patchset : 9.3 GiB/s

Please noted that in the test machine, memory access latency is very bad
across nodes compare to local node in aarch64, which is why bandwidth
while bind node is much better.

Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier',
and io can't be dispatched until 'barrier' is dropped.

Since holding the 'barrier' is not common, convert 'resync_lock' to use
seqlock so that holding lock can be avoided in fast path.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-and-Tested-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>

'conf->barrier' is protected by 'conf->resync_lock', reading
'conf->barrier' without holding the lock is wrong.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>

Currently, wake_up() is called unconditionally in fast path such as
raid10_make_request(), which will cause lock contention under high
concurrency:

raid10_make_request
 wake_up
  __wake_up_common_lock
   spin_lock_irqsave

Improve performance by only call wake_up() if waitqueue is not empty
in allow_barrier() and raid10_make_request().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>

For the case nowait in wait_barrier(), there is no point to increase
nr_waiting and then decrease it.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>

Currently the nasty condition in wait_barrier() is hard to read. This
patch factors out the condition into a function.

There are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>

A regression is seen where mddev devices stay permanently after they
are stopped due to an elevated reference count.

This was tracked down to an extra mddev_get() in md_seq_start().

It only happened rarely because most of the time the md_seq_start()
is called with a zero offset. The path with an extra mddev_get() only
happens when it starts with a non-zero offset.

The commit noted below changed an mddev_get() to check its success
but inadvertently left the original call in. Remove the extra call.

Fixes: 12a6caf2 ("md: only delete entries from all_mddevs when the disk is freed")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>

When running chunk-sized reads on disks with badblocks duplicate bio
free/puts are observed:

   =============================================================================
   BUG bio-200 (Not tainted): Object already free
   -----------------------------------------------------------------------------
   Allocated in mempool_alloc_slab+0x17/0x20 age=3 cpu=2 pid=7504
    __slab_alloc.constprop.0+0x5a/0xb0
    kmem_cache_alloc+0x31e/0x330
    mempool_alloc_slab+0x17/0x20
    mempool_alloc+0x100/0x2b0
    bio_alloc_bioset+0x181/0x460
    do_mpage_readpage+0x776/0xd00
    mpage_readahead+0x166/0x320
    blkdev_readahead+0x15/0x20
    read_pages+0x13f/0x5f0
    page_cache_ra_unbounded+0x18d/0x220
    force_page_cache_ra+0x181/0x1c0
    page_cache_sync_ra+0x65/0xb0
    filemap_get_pages+0x1df/0xaf0
    filemap_read+0x1e1/0x700
    blkdev_read_iter+0x1e5/0x330
    vfs_read+0x42a/0x570
   Freed in mempool_free_slab+0x17/0x20 age=3 cpu=2 pid=7504
    kmem_cache_free+0x46d/0x490
    mempool_free_slab+0x17/0x20
    mempool_free+0x66/0x190
    bio_free+0x78/0x90
    bio_put+0x100/0x1a0
    raid5_make_request+0x2259/0x2450
    md_handle_request+0x402/0x600
    md_submit_bio+0xd9/0x120
    __submit_bio+0x11f/0x1b0
    submit_bio_noacct_nocheck+0x204/0x480
    submit_bio_noacct+0x32e/0xc70
    submit_bio+0x98/0x1a0
    mpage_readahead+0x250/0x320
    blkdev_readahead+0x15/0x20
    read_pages+0x13f/0x5f0
    page_cache_ra_unbounded+0x18d/0x220
   Slab 0xffffea000481b600 objects=21 used=0 fp=0xffff8881206d8940 flags=0x17ffffc0010201(locked|slab|head|node=0|zone=2|lastcpupid=0x1fffff)
   CPU: 0 PID: 34525 Comm: kworker/u24:2 Not tainted 6.0.0-rc2-localyes-265166-gf11c5343fa3f #143
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
   Workqueue: raid5wq raid5_do_work
   Call Trace:
    <TASK>
    dump_stack_lvl+0x5a/0x78
    dump_stack+0x10/0x16
    print_trailer+0x158/0x165
    object_err+0x35/0x50
    free_debug_processing.cold+0xb7/0xbe
    __slab_free+0x1ae/0x330
    kmem_cache_free+0x46d/0x490
    mempool_free_slab+0x17/0x20
    mempool_free+0x66/0x190
    bio_free+0x78/0x90
    bio_put+0x100/0x1a0
    mpage_end_io+0x36/0x150
    bio_endio+0x2fd/0x360
    md_end_io_acct+0x7e/0x90
    bio_endio+0x2fd/0x360
    handle_failed_stripe+0x960/0xb80
    handle_stripe+0x1348/0x3760
    handle_active_stripes.constprop.0+0x72a/0xaf0
    raid5_do_work+0x177/0x330
    process_one_work+0x616/0xb20
    worker_thread+0x2bd/0x6f0
    kthread+0x179/0x1b0
    ret_from_fork+0x22/0x30
    </TASK>

The double free is caused by an unnecessary bio_put() in the
if(is_badblock(...)) error path in raid5_read_one_chunk().

The error path was moved ahead of bio_alloc_clone() in c82aa1b7
("md/raid5: move checking badblock before clone bio in
raid5_read_one_chunk"). The previous code checked and freed align_bio
which required a bio_put. After the move that is no longer needed as
raid_bio is returned to the control of the common io path which
performs its own endio resulting in a double free on bad device blocks.

Fixes: c82aa1b7 ("md/raid5: move checking badblock before clone bio in raid5_read_one_chunk")
Signed-off-by: David Sloan <david.sloan@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>

When doing degrade/recover tests using the journal a kernel BUG
is hit at drivers/md/raid5.c:4381 in handle_parity_checks5():

  BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));

This was found to occur because handle_stripe_fill() was skipped
for stripes in the journal due to a condition in that function.
Thus blocks were not fetched and R5_UPTODATE was not set when
the code reached handle_parity_checks5().

To fix this, don't skip handle_stripe_fill() unless the stripe is
for read.

Fixes: 07e83364 ("md/r5cache: shift complex rmw from read path to write path")
Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>

The atomic_read() is not needed in many cases so only do
the read after the first checks are done.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>