- 01 Feb, 2017 10 commits
-
-
Yegor Yefremov authored
commit befa6011 upstream. In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). Also add error checking for clk_prepare_enable(). Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Einar Jón authored
commit c97c52be upstream. The priv->device pointer for c_can_pci is never set, but it is used without a NULL check in c_can_start(). Setting it in c_can_pci_probe() like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and without CONFIG_PM. This might also cause the pm_runtime_*() functions in c_can.c to actually be executed for c_can_pci devices - they are the only other place where priv->device is used, but they all contain a null check. Signed-off-by:
Einar Jón <tolvupostur@gmail.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 9dce990d upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. convert_vx_to_fp() is adapted to handle only a specified number of registers rather than unconditionally handling all of them: other callers of this function are adapted appropriately. Based on an initial patch by Dave Martin. Reported-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jack Morgenstein authored
commit b4cfe397 upstream. If IPV6 has not been enabled in the underlying kernel, we must avoid calling IPV6 procedures in rdma_cm.ko. This requires using "IS_ENABLED(CONFIG_IPV6)" in "if" statements surrounding any code which calls external IPV6 procedures. In the instance fixed here, procedure cma_bind_addr() called ipv6_addr_type() -- which resulted in calling external procedure __ipv6_addr_type(). Fixes: 6c26a771 ("RDMA/cma: fix IPv6 address resolution") Cc: Spencer Baugh <sbaugh@catern.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit 950eabbd upstream. With some gcc versions, we get a warning about the eicon driver, and that currently shows up as the only remaining warning in one of the build bots: In file included from ../drivers/isdn/hardware/eicon/message.c:30:0: eicon/message.c: In function 'mixer_notify_update': eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] The code is easily changed to open-code the unusual PUT_WORD() line causing this to avoid the warning. Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
commit ff9f8a7c upstream. We perform the conversion between kernel jiffies and ms only when exporting kernel value to user space. We need to do the opposite operation when value is written by user. Only matters when HZ != 1000 Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vlastimil Babka authored
commit d51e9894 upstream. Since commit be97a41b ("mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma") alloc_pages_vma() can potentially free a mempolicy by mpol_cond_put() before accessing the embedded nodemask by __alloc_pages_nodemask(). The commit log says it's so "we can use a single exit path within the function" but that's clearly wrong. We can still do that when doing mpol_cond_put() after the allocation attempt. Make sure the mempolicy is not freed prematurely, otherwise __alloc_pages_nodemask() can end up using a bogus nodemask, which could lead e.g. to premature OOM. Fixes: be97a41b ("mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma") Link: http://lkml.kernel.org/r/20170118141124.8345-1-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit fdf35a6b upstream. I noticed that the VT switch doesn't work any longer with a Dell laptop with 1366x768 eDP when the machine is connected with a DP monitor. It behaves as if VT were switched, but the graphics remain frozen. Actually the keyboard works, so I could switch back to VT7 again. I tried to track down the problem, and encountered a long story until we reach to this error: - The machine is booted with video=1366x768 option (the distro installer seems to add it as default). - Recently, drm_helper_probe_single_connector_modes() deals with cmdline modes, and it tries to create a new mode when no matching mode is found. - The drm_mode_create_from_cmdline_mode() creates a mode based on either CVT of GFT according to the given cmdline mode; in our case, it's 1366x768. - Since both CVT and GFT can't express the width 1366 due to alignment, the resultant mode becomes 1368x768, slightly larger than the given size. - Later on, the atomic commit is performed, and in drm_atomic_check_only(), the size of each plane is checked. - The size check of 1366x768 fails due to the above, and eventually the whole VT switch fails. Back in the history, we've had a manual fix-up of 1368x768 in various places via c09dedb7 ("drm/edid: Add a workaround for 1366x768 HD panel"), but they have been all in drm_edid.c at probing the modes from EDID. For addressing the problem above, we need a similar hack to the mode newly created from cmdline, manually adjusting the width when the expected size is 1366 while we get 1368 instead. Fixes: eaf99c74 ("drm: Perform cmdline mode parsing during...") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170109145614.29454-1-tiwai@suse.deReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Dave Martin authored
commit fd7c9914 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Kees Cook authored
commit 2dc705a9 upstream. Copying color maps to userspace doesn't check the value of to->start, which will cause kernel heap buffer OOB read due to signedness wraps. CVE-2016-8405 Link: http://lkml.kernel.org/r/20170105224249.GA50925@beast Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kees Cook <keescook@chromium.org> Reported-by: Peter Pi (@heisecode) of Trend Micro Cc: Min Chong <mchong@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
- 26 Jan, 2017 30 commits
-
-
Greg Kroah-Hartman authored
-
Mark Rutland authored
commit 7d9e8f71 upstream. Generally, taking an unexpected exception should be a fatal event, and bad_mode is intended to cater for this. However, it should be possible to contain unexpected synchronous exceptions from EL0 without bringing the kernel down, by sending a SIGILL to the task. We tried to apply this approach in commit 9955ac47 ("arm64: don't kill the kernel on a bad esr from el0"), by sending a signal for any bad_mode call resulting from an EL0 exception. However, this also applies to other unexpected exceptions, such as SError and FIQ. The entry paths for these exceptions branch to bad_mode without configuring the link register, and have no kernel_exit. Thus, if we take one of these exceptions from EL0, bad_mode will eventually return to the original user link register value. This patch fixes this by introducing a new bad_el0_sync handler to cater for the recoverable case, and restoring bad_mode to its original state, whereby it calls panic() and never returns. The recoverable case branches to bad_el0_sync with a bl, and returns to userspace via the usual ret_to_user mechanism. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Fixes: 9955ac47 ("arm64: don't kill the kernel on a bad esr from el0") Reported-by:
Mark Salter <msalter@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Madhavan Srinivasan authored
commit df21d2fa upstream. Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453 ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Marek Szyprowski authored
commit 5c9e6c2b upstream. PL330 DMA engine driver is leaking a runtime reference after any terminated DMA transactions. This patch fixes this issue by tracking runtime PM state of the device and making additional call to pm_runtime_put() in terminate_all callback if needed. Fixes: ae43b328 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Nicolas Iooss authored
commit 7ec03e60 upstream. Function ite_set_carrier_params() uses variable use_demodulator after having initialized it to false in some if branches, but this variable is never set to true otherwise. This bug has been found using clang -Wsometimes-uninitialized warning flag. Fixes: 620a32bb ("[media] rc: New rc-based ite-cir driver for several ITE CIRs") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Dan Carpenter authored
commit c9205e18 upstream. devm_pinctrl_get() can fail so we should check for that. Fixes: 0a6824bc ('[media] v4l2: blackfin: select proper pinctrl state in ppi_set_params if CONFIG_PINCTRL is enabled') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Linus Walleij authored
commit 90f92c63 upstream. The following patch was sketched by Russell in response to my crashes on the PB11MPCore after the patch for software-based priviledged no access support for ARMv8.1. See this thread: http://marc.info/?l=linux-arm-kernel&m=144051749807214&w=2 I am unsure what is going on, I suspect everyone involved in the discussion is. I just want to repost this to get the discussion restarted, as I still have to apply this patch with every kernel iteration to get my PB11MPCore Realview running. Testing by Neil Armstrong on the Oxnas NAS has revealed that this bug exist also on that widely deployed hardware, so we are probably currently regressing all ARM11MPCore systems. Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Fixes: a5e090ac ("ARM: software-based priviledged-no-access support") Tested-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Arnd Bergmann authored
commit f0e8faa7 upstream. This function clearly never worked and always returns true, as pointed out by gcc-7: arch/arm/mach-ux500/pm.c: In function 'prcmu_is_cpu_in_wfi': arch/arm/mach-ux500/pm.c:137:212: error: ?: using integer constants in boolean context, the expression will always evaluate to 'true' [-Werror=int-in-bool-context] With the added braces, the condition actually makes sense. Fixes: 34fe6f10 ("mfd : Check if the other db8500 core is in WFI") Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Gary Bisson authored
commit 6ab5c2b6 upstream. This patch fixes the following error: sgtl5000 0-000a: Error reading chip id -6 imx-sgtl5000 sound: ASoC: CODEC DAI sgtl5000 not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) The problem was that the pinctrl group was linked to the sound driver instead of the codec node. Since the codec is probed first, the sys_mclk was missing and it would therefore fail to initialize. Fixes: b32e7002 ("ARM: dts: imx: add Boundary Devices Nitrogen6_Max board") Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dave Martin authored
commit ad9e202a upstream. We cannot preserve partial fields for hardware breakpoints, because the values written by userspace to the hardware breakpoint registers can't subsequently be recovered intact from the hardware. So, just reject attempts to write incomplete fields with -EINVAL. Fixes: 478fcb2c ("arm64: Debugging support") Signed-off-by:
Will Deacon <Will.Deacon@arm.com> Signed-off-by:
-
Dave Martin authored
commit aeb1f39d upstream. This patch adds an explicit __reserved[] field to user_fpsimd_state to replace what was previously unnamed padding. This ensures that data in this region are propagated across assignment rather than being left possibly uninitialised at the destination. Fixes: 60ffc30d ("arm64: Exception handling") Signed-off-by:
-
Dave Martin authored
commit a672401c upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 5d220ff9 ("arm64: Better native ptrace support for compat tasks") Signed-off-by:
-
Dave Martin authored
commit 9dd73f72 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 766a85d7 ("arm64: ptrace: add NT_ARM_SYSTEM_CALL regset") Signed-off-by:
-
Dave Martin authored
commit 9a17b876 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 478fcb2c ("arm64: Debugging support") Signed-off-by:
-
Fabien Parent authored
commit 43849785 upstream. Read access to the SPI flash are broken on da850-evm, i.e. the data read is not what is actually programmed on the flash. According to the datasheet for the M25P64 part present on the da850-evm, if the SPI frequency is higher than 20MHz then the READ command is not usable anymore and only the FAST_READ command can be used to read data. This commit specifies in the DTS that we should use FAST_READ command instead of the READ command. Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Fabien Parent <fparent@baylibre.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Jeff Layton authored
commit 6df8c9d8 upstream. sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Mark Rutland authored
commit ddc37832 upstream. On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an undefined instruction trap within write_wb_reg. This is because Scorpion CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if the core is not powered down. When DBGPRSR.SPD is set, breakpoint and watchpoint registers are treated as undefined. It's possible to trigger similar crashes later on from userspace, by requesting the kernel to install a breakpoint or watchpoint, as we can go idle at any point between the reset of the debug registers and their later use. This has always been the case. Given that this has always been broken, no-one has complained until now, and there is no clear workaround, disable hardware breakpoints and watchpoints on Scorpion to avoid these issues. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
-
Sriharsha Basavapatna authored
commit ce1ca7d2 upstream. In rdma_read_chunk_frmr() when ib_post_send() fails, the error code path invokes ib_dma_unmap_sg() to unmap the sg list. It then invokes svc_rdma_put_frmr() which in turn tries to unmap the same sg list through ib_dma_unmap_sg() again. This second unmap is invalid and could lead to problems when the iova being unmapped is subsequently reused. Remove the call to unmap in rdma_read_chunk_frmr() and let svc_rdma_put_frmr() handle it. Fixes: 412a15c0 ("svcrdma: Port to new memory registration API") Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Joonyoung Shim authored
commit bc7c36ee upstream. When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Richard Weinberger authored
commit 1cb51a15 upstream. When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by:
Rock Lee <rockdotlee@gmail.com> Reviewed-by:
David Gstir <david@sigma-star.at> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Quinn Tran authored
commit fc1ffd6c upstream. During code inspection, while investigating following stack trace seen on one of the test setup, we found out there was possibility of memory leak becuase driver was not unwinding the stack properly. This issue has not been reproduced in a test environment or on a customer setup. Here's stack trace that was seen. [1469877.797315] Call Trace: [1469877.799940] [<ffffffffa03ab6e9>] qla2x00_mem_alloc+0xb09/0x10c0 [qla2xxx] [1469877.806980] [<ffffffffa03ac50a>] qla2x00_probe_one+0x86a/0x1b50 [qla2xxx] [1469877.814013] [<ffffffff813b6d01>] ? __pm_runtime_resume+0x51/0xa0 [1469877.820265] [<ffffffff8157c1f5>] ? _raw_spin_lock_irqsave+0x25/0x90 [1469877.826776] [<ffffffff8157cd2d>] ? _raw_spin_unlock_irqrestore+0x6d/0x80 [1469877.833720] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.839885] [<ffffffff8157cd0c>] ? _raw_spin_unlock_irqrestore+0x4c/0x80 [1469877.846830] [<ffffffff81319b9c>] local_pci_probe+0x4c/0xb0 [1469877.852562] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.858727] [<ffffffff81319c89>] pci_call_probe+0x89/0xb0 Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [ bvanassche: Fixed spelling in patch description ] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Ruslan Ruslichenko authored
commit 020eb3da upstream. commit d32932d0 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. Unfortunately the software resend fallback is not enabled on X86, so edge interrupts which are received during the lazy disabled state of the interrupt line are not retriggered and therefor lost. Restore the callbacks. [ tglx: Massaged changelog ] Fixes: d32932d0 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by:
Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.comSigned-off-by:
-
Hauke Mehrtens authored
commit 73529c87 upstream. The xway_nand driver accesses the ltq_ebu_membase symbol which is not exported. This also should not get exported and we should handle the EBU interface in a better way later. This quick fix just deactivated support for building as module. Fixes: 99f2b107 ("mtd: lantiq: Add NAND support on Lantiq XWAY SoC.") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Stefan Schmidt authored
commit 05a974ef upstream. From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes the buffers already being present in time of 4.9 being released. This should go into stable as well. Reported-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Stefan Wahren authored
commit 01167c7b upstream. According to the code the intention is to append 8 SCK cycles instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this will never happened because it's an AC command not an ADTC command. So fix this by moving the statement into the right function. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: e4243f13 (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 7a546af5 upstream. Make sure to check for short control transfers in order to avoid parsing uninitialised buffer data and leaking it to user space. Note that the backlight and macro-mode buffer constraints are kept as loose as possible in order to avoid any regressions should the current buffer sizes be larger than necessary. Fixes: 6f78193e ("HID: corsair: Add Corsair Vengeance K90 driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Johan Hovold authored
commit 6d104af3 upstream. Not all platforms support DMA to the stack, and specifically since v4.9 this is no longer supported on x86 with VMAP_STACK either. Note that the macro-mode buffer was larger than necessary. Fixes: 6f78193e ("HID: corsair: Add Corsair Vengeance K90 driver") Signed-off-by:
-
Bjorn Helgaas authored
commit 51ebfc92 upstream. A PCI-to-PCIe bridge (a "reverse bridge") has a PCI or PCI-X primary interface and a PCI Express secondary interface. The PCIe interface is a Downstream Port that originates a Link. See the "PCI Express to PCI/PCI-X Bridge Specification", rev 1.0, sections 1.2 and A.6. The bug report below involves a PCI-to-PCIe bridge and a PCIe switch below the bridge: 00:1e.0 Intel 82801 PCI Bridge to [bus 01-0a] 01:00.0 Pericom PI7C9X111SL PCIe-to-PCI Reversible Bridge to [bus 02-0a] 02:00.0 Pericom Device 8608 [PCIe Upstream Port] to [bus 03-0a] 03:01.0 Pericom Device 8608 [PCIe Downstream Port] to [bus 0a] 01:00.0 is configured as a PCI-to-PCIe bridge (despite the name printed by lspci). As we traverse a PCIe hierarchy, device connections alternate between PCIe Links and internal Switch logic. Previously we did not recognize that 01:00.0 had a secondary link, so we thought the 02:00.0 Upstream Port *did* have a secondary link. In fact, it's the other way around: 01:00.0 has a secondary link, and 02:00.0 has internal Switch logic on its secondary side. When we thought 02:00.0 had a secondary link, the pci_scan_slot() -> only_one_child() path assumed 02:00.0 could have only one child, so 03:00.0 was the only possible downstream device. But 03:00.0 doesn't exist, so we didn't look for any other devices on bus 03. Booting with "pci=pcie_scan_all" is a workaround, but we don't want users to have to do that. Recognize that PCI-to-PCIe bridges originate links on their secondary interfaces. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189361 Fixes: d0751b98 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") Tested-by:
Blake Moore <blake.moore@men.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Tahsin Erdogan authored
commit a8a86d78 upstream. fuse_abort_conn() moves requests from pending list to a temporary list before canceling them. This operation races with request_wait_answer() which also tries to remove the request after it gets a fatal signal. It checks FR_PENDING flag to determine whether the request is still in the pending list. Make fuse_abort_conn() clear FR_PENDING flag so that request_wait_answer() does not remove the request from temporary list. This bug causes an Oops when trying to delete an already deleted list entry in end_requests(). Fixes: ee314a87 ("fuse: abort: no fc->lock needed for request ending") Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit 78794d18 upstream. Context expiry times are in units of seconds since boot, not unix time. The use of get_seconds() here therefore sets the expiry time decades in the future. This prevents timely freeing of contexts destroyed by client RPC_GSS_PROC_DESTROY requests. We'd still free them eventually (when the module is unloaded or the container shut down), but a lot of contexts could pile up before then. Fixes: c5b29f88 "sunrpc: use seconds since boot in expiry cache" Reported-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
