AC97 Codec
Fix stereo mutes on Surround volume control.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDA Codec driver
Fix ALC260 support on HP machines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

VIA82xx driver
Use DXS volumes as PCM control in cases with no volume control on codec
(e.g. C-Media).  'DXS Playback Volume' controls are removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

GUS Library
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Generic drivers,MPU401 UART,SB8 driver,Wavefront drivers,CS4281 driver
ENS1370/1+ driver,CS46xx driver,EMU10K1/EMU10K2 driver,RME HDSP driver
Use spin_lock_irqsave() instead of spin_lock() in places where we
could be interrupted by another hardware interrupt that could call
the rawmidi trigger callback that could try to take the same lock.

Additionally, remove locking code that is no longer needed now that
the trigger callback is no longer called recursively from the rawmidi
'event' handler.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

ALSA Core
Remove duplicate MODULE_ALIAS for the snd module.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

RTC timer driver,ALSA sequencer
Add snd-timer-1 and snd-seq-client-63 module aliases for the
snd-rtctimer and snd-seq-dummy modules.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Documentation
Add information about the rawmidi interface to the driver-writing
documentation.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

AC97 Codec
Replace simple_strtol with simple_strtoul for compatibility with
2.2.x kernels.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

RawMidi Midlevel
Move the event callback into a tasklet instead of calling it directly
from snd_rawmidi_transmit_ack/_receive to prevent recursive calls to
the trigger callback.  This means that drivers no longer have to
check that they're called inside their own spinlock.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

RawMidi Midlevel
Move the duplicated memory handling code for the rawmidi runtime struct
into the snd_rawmidi_init/_done_buffer functions and rename them to
snd_rawmidi_runtime_create/_free.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

PCM Midlevel
    This patch is against alsa-driver-1.0.8.
    It covers:
        alsa-kernel/core/pcm_lib.c
    The main changes are in the first listed file.

    It corresponds to bug description:
        <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=951>

    The patch does cosmetic change:

     -- Better, more universal and smaller wrapping to within
        0..runtime->boundary-1 in functions snd_pcm_lib_write1() and
        snd_pcm_lib_read1() in pcm_lib.c
Signed-off-by: Charles Levert <charles_levert@gna.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

PCM Midlevel
    This patch is against alsa-driver-1.0.8.
    It covers:
        alsa-kernel/core/pcm_lib.c

    It corresponds to bug description:
        <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=951>

    The patch fixes the following problem:

     -- Properly perform rounded-up integer division in
        snd_pcm_system_tick_set() in pcm_lib.c.

        This only had a minor impact.
Signed-off-by: Charles Levert <charles_levert@gna.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Documentation
Change the documentation about disabling the standard serial driver
to use 'uart none' instead of 'none' as setserial option.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

into suse.cz:/home/perex/bk/linux-sound/linux-sound

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into northbeach.davemloft.net:/home/davem/src/BK/sparc-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Support for s3c2400 uarts in the s3c2410.c driver,
to go with the s3c2410 and s3c2440 support already
in there.
Add PORT_S3C2400 to include/linux/serial_core.h

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Update info on supported CPUs, add Lucas to
the list of contributors.
Add section on adding new machines

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

I'm oopsing on shutdown on a machine that has a Via Rhine adapter in it:

Unable to handle kernel paging request at virtual address e0803003
[...]
EIP is at ioread8+0x2c/0x40
Call Trace:
 [<c0103d5f>] show_stack+0x7f/0xa0
 [<c0103efa>] show_registers+0x15a/0x1c0
 [<c01040ce>] die+0xce/0x150
 [<c0113406>] do_page_fault+0x356/0x692
 [<c01039ff>] error_code+0x2b/0x30
 [<c026b490>] rhine_shutdown+0x60/0x140
 [<c0253ad9>] device_shutdown+0x89/0x8b
 [<c012461c>] sys_reboot+0xac/0x200
 [<c0102f71>] sysenter_past_esp+0x52/0x75


Seems like it is the ioread8 in:

        /* Hit power state D3 (sleep) */
        iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);

that fails. StickyHW is 0x83. lspci says:

0000:00:07.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev 06)
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at ec00 [size=128]
        Memory at dfffff80 (32-bit, non-prefetchable) [size=128]

In other words, it's trying to read outside of the I/O range (0x80),
which matches the fauling address.

I'm guessing my chip revision doesn't support WOL, it's a crappy noname
card.

It does seem as if rhine_power_init checks quirks for rqWOL before
touching any registers. Should rhine_shutdown do the same? Proposed
patch below, which resolves the problem on my system.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

From: Herbert Xu <herbert@gondor.apana.org.au>

Fix bug #4223.

OK, this happened because we got preempted before sis900_mii_probe
finished setting the sis_priv->mii.  Theoretically this can happen
with SMP as well but I suppose the number of SMP machines with sis900
is fairly small.

Anyway, the fix is to make sure that sis900_mii_probe is done before
the device can be opened.  This patch does it by moving the setup
before register_netdevice.

Since the netdev name is not available before register_netdev, I've
changed the relevant printk's to use pci_name instead.  Note that
one of those printk's may be called after register_netdev as well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This moves us away from using the rwsem, although recursive adds and removes of class devices
is not yet possible (nor is it really known if it even is needed.)  So this simple change is
done instead.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If further finer grained locking is needed, we can add a lock to the sysdev_class to
lock the class drivers list.  But if you do that, remember the global list also is still
there and needs to be protected.  That's why I went with a simple lock for everything.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Heh, "global_drivers" as a static...
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Thanks to Alessandro Rubini <rubini@gnudd.com> for pointing this out.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Thanks to Alessandro Rubini <rubini@gnudd.com> for pointing this out.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This forces the caller to provide the lock, but as they all already had one, it's not a big change.
It also removes the now-unneeded cdev_subsys.  Thanks to Jon Corbet for reminding me about that.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

into suse.de:/home/greg/linux/BK/do/sh-2.6

This is needed if the class code is going to be made easier to use, and it makes the code
smaller and easier to understand.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Paul Mundt <paul.mundt@nokia.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The attached patch makes read/write semaphores use interrupt disabling
spinlocks in the slow path, thus rendering the up functions and trylock
functions available for use in interrupt context.  This matches the
regular semaphore behaviour.

I've assumed that the normal down functions must be called with interrupts
enabled (since they might schedule), and used the irq-disabling spinlock
variants that don't save the flags.
Signed-Off-By: David Howells <dhowells@redhat.com>
Tested-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adrian Bunk <bunk@stusta.de> writes:

> This patch contains the following cleanups:
> - make the needlessly global struct aoe_fops static
> - #if 0 the unused global function aoechr_hdump

Thanks for the patch.  The original patch leaves the prototype for
aoechr_hdump in aoe.h, but since this function is just for debugging,
it seems better to just take both prototype and definition out.


remove aoechr_hdump
make aoe_fops static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Suse 9.1 Pro doesn't put /sys in /etc/mtab.  This patch makes the
example aoe status.sh script work when sysfs is mounted but `mount`
doesn't mention sysfs.


aoe status.sh: handle sysfs not in /etc/mtab
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>