- 25 Oct, 2017 19 commits
-
-
Chris Wilson authored
The execlists emulation on top of the GuC (used for scheduling and preemption) depends on the MI_USER_INTERRUPT for its notifications and tasklet action. As we always employ the irq, there is no advantage in ever disabling it while we are using the GuC, so allow us to arm the breadcrumb irq when enabling GuC submission and disarm upon disabling. The impact should be lessened by the delayed irq disabling we do (we only disable after receiving an interrupt for which no one was wanting), but allowing guc to explicitly manage the irq in relation to itself is simpler and prevents an issue with losing an interrupt for preemption as it is not coupled to an active request. Internally, we add a reference counter (breadcrumbs.irq_enabled) as a simple mechanism to allow GuC to keep the breadcrumb irq enabled. To improve upon always enabling the irq while guc is selected, we need to hook into the parking facility of intel_engines so that we only enable the breadcrumbs while the GT is active (one step better would be to individually park/unpark each engine). In effect, this means that we keep the breadcrumb irq always enabled for the entire duration the guc is busy, whereas before we would try to switch it off whenever we idled for more than interrupt with no associated waiters. The difference *should* be negligible in practice! v2: Stop abusing fence signaling (and its auxiliary data structures) to enable the breadcrumbs irqs. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com>, Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>, Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
In the next patch, we will want to install a callback when the engines (GT as a whole) become idle and similarly when they first become busy. To enable that callback, first rename intel_engines_mark_idle() to intel_engines_park() and provide the companion intel_engines_unpark(). Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-2-chris@chris-wilson.co.uk
-
Rodrigo Vivi authored
This is heavily based on a initial patch provided by Ville plus all changes provided later by Ander. As Geminilake, Cannonlake also supports 2 pixels per clock. Different from Geminilake we are not implementing the 99% Wa. But we can revisit that decision later if we find out any limitation on later CNL SKUs. v2: Rebase on top of commit 'd305e061 ("drm/i915: Track minimum acceptable cdclk instead of "minimum dotclock")' v3: When fixing HDMI on CNL I noticed that I missed to convert back the doubled pixel rate to cdclk. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003223142.26264-1-rodrigo.vivi@intel.com
-
Joonas Lahtinen authored
When running under virtualization (vGPU active), we must disable the lazy PPGTT page table initialization optimization introduced by commit 14826673 ("drm/i915: Only initialize partially filled pagetables"). We must do this because GVT-g makes unduly assumptions about guest behaviour, which this optimization breaks. This results in following looking errors in the host: ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1 The real fix is to not to depend on i915 driver behaviour, but instead either rely on only the contracts that i915 has with the hardware, or add some paravirtualization. While the real fix is en route, it won't be finished in time for 4.15, so the best option is to disable the optimization for now when vGPU is active to avoid breaking 4.15 guests in existing VM environments. Fixes: 14826673 ("drm/i915: Only initialize partially filled pagetables") Suggested-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com
-
Chris Wilson authored
This reverts commit 6d0dbd30. timer_setup_on_stack() does not yet exist: In file included from drivers/gpu/drm/i915/i915_sw_fence.c:517:0: drivers/gpu/drm/i915/selftests/lib_sw_fence.c: In function ‘timed_fence_init’: drivers/gpu/drm/i915/selftests/lib_sw_fence.c:63:2: error: implicit declaration of function ‘timer_setup_on_stack’; did you mean ‘hrtimer_init_on_stack’? [-Werror=implicit-function-declaration] timer_setup_on_stack(&tf->timer, timed_fence_wake, 0); Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151344.GA104417@beastReviewed-by:
-
Chris Wilson authored
During evict, we wish to idle the GPU if we see that the GGTT is full. However, our test for idle in i915_gem_evict_something() and in i915_gem_switch_to_kernel_context() do not match leading to disappointment - we never believe that we are idle and keep trying to flush the GGTT ad infinitum. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103438Signed-off-by:
-
Chris Wilson authored
Instead of trying to create a timer with zero delay (i.e. with expires set to the current jiffies and not the future, an already expired timer), execute that request immediately. v2: Refactor list_del_init+signal into its own little function. v3: Reorder testing so as not to immediately signal a delayed request. Signed-off-by:
-
Chris Wilson authored
Insert a breakpoint, a chance to escape back to the scheduler and run something else for a bit, if we find that the GGTT is full and needs to be idled in order to make some room. In practice, this should only be an issue in stress tests as the wait itself will normally give the chance for the scheduler to intervene and make progress. References: https://bugs.freedesktop.org/show_bug.cgi?id=103438Signed-off-by:
-
Ville Syrjälä authored
WARN if the cdclk state doesn't match what we expect after programming. And let's remove the WARN from bdw_set_cdclk() that's trying to achieve the same thing in a more limite fashion. Also take the opportunity to refactor the code to use a common function for dumping out a cdclk state. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-11-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
chv_set_cdclk() sanity checks that the cdclk frequency is one of the legal values. Do the same in the VLV function. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
On CNL we may need to bump up the system agent voltage not only due to CDCLK but also when driving DDI port with a sufficiently high clock. To that end start tracking the minimum acceptable voltage for each crtc. We do the tracking via crtcs because we don't have any kind of encoder state. Also there's no downside to doing it this way, and it matches how we track cdclk requirements on account of pixel rate. v2: Allow disabled crtcs to use the min voltage Add IS_CNL check to intel_ddi_compute_min_voltage() since we're using CNL specific values there s/intel_compute_min_voltage/cnl_compute_min_voltage/ since the function makes hw specific assumptions about the voltage values v3: Drop the test hack leftovers from skl_modeset_calc_cdclk() v4: s/voltage/voltage_level/ (Rodrigo) Replace DPLL DVFS FIXMEs with an explanation why we don't do anything there (Rodrigo) Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: -
Ville Syrjälä authored
Track the system agent voltage we request from pcode in the cdclk state on CNL. Annoyingly we can't actually read out the current value since there's no pcode command to do that, so we'll have to just assume that it worked. v2: s/voltage/voltage_level/ (Rodrigo) Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Track the system agent voltage we request from pcode in the cdclk state on BXT/GLK. Annoyingly we can't actually read out the current value since there's no pcode command to do that, so we'll have to just assume that it worked. v2: s/voltage/voltage_level/ (Rodrigo) Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Track the system agent voltage we request from pcode in the cdclk state on SKL/KBL/CFL. Annoyingly we can't actually read out the current value since there's no pcode command to do that, so we'll have to just assume that it worked. v2: s/voltage/voltage_level/ (Rodrigo) Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Track the system agent voltage we request from pcode in the cdclk state on BDW. Annoyingly we can't actually read out the current value since there's no pcode command to do that, so we'll have to just assume that it worked. v2: Keep the WARN_ON (Rodrigo) v3: s/voltage/voltage_level/ (Rodrigo) Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Store the punit DSPFREQUAR value into cdclk_state->voltage on VLV/CHV. Since we can actually read that out from the hardware this can give us a bit more cross checking between the hardware and software state. v2: Don't break waiting for cdclk change on VLV/CHV v3: Split out the cdclk sanity check in vlv_set_cdclk() (Rodrigo) v4: s/voltage/voltage_level/ (Rodrigo) Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
For CNL we'll need to start considering the port clocks when we select the voltage level for the system agent. To that end start tracking the voltage in the cdclk state (since that already has to adjust it). v2: s/voltage/voltage_level/ (Rodrigo) Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Redo some switch statements in the cdclk code to use a common fall through for the default case. Makes everything look a bit more uniform Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024095216.1638-2-ville.syrjala@linux.intel.com
-
- 24 Oct, 2017 8 commits
-
-
Anusha Srivatsa authored
The latest version of DMC on CNL is 1.06. Update the version so as to load the latest firmware. Release Notes: Version: 1.06 1. DDI and AUX IO related fix. v2: Improve the prefixes in commit message. Add Release Notes directly. (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
On CNL, individual wake rate limit was added to each engine. GT can only go to RC6 if both Render and Media engines are individually qualified. So we need to set their individual wake rate limit. +-----------------+---------------+--------------+--------------+ | | GT RC6 | Render C6 | Media C6 | +-----------------+---------------+--------------+--------------+ | Wake rate limit | 0xA09C[31:16] | 0xA09C[15:0] | 0xA0A0[15:0] | +-----------------+---------------+--------------+--------------+ v2: - Tune Render and Media wake rate values according to some extra info I got from HW engineers. Value can be tuned, but for now these are the recommended values. - Fix typos pointed by James. Cc: Nathan Ciobanu <nathan.d.ciobanu@intel.com> Cc: Wayne Boyer <wayne.boyer@intel.com> Cc: Joe Konno <joe.konno@linux.intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:James Ausmus <james.ausmus@intel.com> Reviewed-by:
David Weinehall <david.weinehall@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023224612.27208-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
As we faced in BXT, on CNL DDI_A_4_LANES is not set as expected when system is boot with multiple monitors connected. This result in wrong lane setup impacting the max data rate available and consequently blocking modeset on eDP, resulting in a blank screen. Most of CNL SKUs don't support DDI-E. The only SKU that supports DDI-E is the same that supports the full A/E split called DDI-F. Also when DDI-F is used DDI-E cannot be used because they share Interrupts. So DDI-E is almost useless. Anyways let's consider this is possible and rely on VBT for that. This patch was initialy start by Clint, but required many changes including full commit message. So Credits entirely to Clint for finding this. v2: Extract all messy conditions into a helper function as suggested by Ville. Along with simplification I removed the debug message on the working case since now all conditions are grouped. v3: Split the conditions even more as suggested by Ville. Get's cleaner and easier to add new cases in the future. Suggested-by:Clint Taylor <clinton.a.taylor@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Lionel Landwerlin authored
The compat callback was missing and triggered failures in 32bits userspace when enabling/disable the perf stream. We don't require any particular processing here as these ioctls don't take any argument. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: eec688e1 ("drm/i915: Add i915 perf infrastructure") Cc: linux-stable <stable@vger.kernel.org> Reviewed-by:
-
Chris Wilson authored
Originally we set the priority to max upon inserting the request into the execlists queue (and removing it from the scheduler lists). We could then use the prio==INT_MAX as a shortcut within execlists_schedule() to detect the end of the dependency chain. Since commit 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") this is no longer true as we use the request completion as an indicator the schedule dependency chain is complete instead. (This allows us to then reschedule requests even when its context is in flight.) However, this makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change the rq->prio at the same time. As the assertion is useful, let's keep the assertion and remove the micro-optimisation. Fixes: 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com>
-
Chris Wilson authored
Back in commit a4b2b015 ("drm/i915: Don't mark an execlists context-switch when idle") we noticed the presence of late context-switch interrupts. We were able to filter those out by looking at whether the ELSP remained active, but in commit beecec90 ("drm/i915/execlists: Preemption!") that became problematic as we now anticipate receiving a context-switch event for preemption while ELSP may be empty. To restore the spurious interrupt suppression, add a counter for the expected number of pending context-switches and skip if we do not need to handle this interrupt to make forward progress. v2: Don't forget to switch on for preempt. v3: Reduce the counter to a on/off boolean tracker. Declare the HW as active when we first submit, and idle after the final completion event (with which we confirm the HW says it is idle), and track each source of activity separately. With a finite number of sources, it should aide us in debugging which gets stuck. Fixes: beecec90 ("drm/i915/execlists: Preemption!") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Chris Wilson authored
When we park the engine (upon idling), we kill the irq tasklet. However, to be sure that it is not restarted by a spurious interrupt after doing so, flush the interrupt handler before parking. As we only park the engines when we believe the system is idle, there should not be any interrupts to distrub us; so flushing the final in-flight interrupt should be sufficient. (However, we are still dependent on the HW behaving in an orderly and timely fashion, which we shall endeavour to improve upon later.) Signed-off-by:
-
Chris Wilson authored
In the idle worker we drop the prolonged GT wakeref used to cover such essentials as interrupt delivery. (When a CS interrupt arrives, we also assert that the GT is awake.) However, it turns out that 10ms is not long enough to be assured that the last CS interrupt has been delivered, so bump that to 200ms, and move the entirety of that wait to before we take the struct_mutex to avoid blocking. As this is now a potentially long wait, restore the earlier behaviour of bailing out early when a new request arrives. v2: Break out the repeated check for new requests into its own little helper to try and improve the self-commentary. Signed-off-by:
-
- 23 Oct, 2017 1 commit
-
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
- 20 Oct, 2017 4 commits
-
-
Rodrigo Vivi authored
Starting on CNL we now need to map VBT DDC Pin to BSPec DDC Pin values. Not a direct translation anymore. According to VBT Block 2 (General Bytes Definition) DDC Bus +----------+-----------+--------------------+ | DDI Type | VBT Value | Bspec Mapped Value | +----------+-----------+--------------------+ | DDI-B | 0x1 | 0x1 | | DDI-C | 0x2 | 0x2 | | DDI-D | 0x3 | 0x4 | | DDI-F | 0x4 | 0x3 | +----------+-----------+--------------------+ v2: Move defines to a better place. This is actually CNL_PCH not CNL only. v3: Accepting Ville's suggestions: enums and array to to make this future proof. v4: Protect the array access as Ville suggested. Also accepting all Jani's suggestions: - use already defined gmbus pin definitions. - use map_ddc_pin for disambiguation. - Add /* sic */ comment on inverted values so people can easily see it it nos a mistake we have the map 3 -> 4 and 4 -> 3 :/ Cc: Jani Nikula <jani.nikula@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Rodrigo Vivi authored
No functional change expected. Just let's use this enum when possible and also same standard pll_id name so we can rework gen9+ port clock later. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Madhav Chauhan authored
This patch re-use already parsed DSI backlight/cabc ports info for saving it inside struct intel_dsi rather than parsing it at the time of DSI initialization. V2: Remove backlight and cabc variable initialization (Jani N). Reviewed-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
-
Madhav Chauhan authored
This patch parse DSI backlight/cabc ports info from VBT and save them inside local structure. This saved info can be directly used while initializing DSI for different platforms instead of parsing for each platform. V2: Changes: - Typo fix in commit message. - Move up newly added port variables (Jani N) - Remove redundant initialization (Jani N) - Don't parse CABC ports if not supported (Jani N) V3: Patch restructure (Suggested by Jani N) Credits-to: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 19 Oct, 2017 8 commits
-
-
Chris Wilson authored
If the device is in runtime suspend, resuming takes time and reduces our powersaving. If this was for a small write into an object, that resume will take longer than any savings in using the indirect GGTT access to avoid the cpu cache. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171019063733.31620-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Only the DDI hook has some actual content. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
They're unused and unsupported. Leave the reduced_clock pointers in place still, should they prove useful later on. v2: go from nuking DDI lowfreq_avail to nuking it entirely (Ville) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
-
Ville Syrjälä authored
A bunch of functions are now exclusively used for HDMI, so naming the variables with hdmi prefix/suffix is redundant. Also use int rather than u32 for the translation level consistently. v2: Rebase due to hdmi_level=-1 avoidance Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Handle missing buf trans tables, or out of bounds buf trans levels the same way everywhere. These should never be hit under normal conditions, but let's play it safe for now. v2: Avoid the hdmi_level=-1 case (James) Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Ville Syrjälä authored
SKL DDI B/C/D only have 9 usable buf trans registers for DP/eDP. That matches the normal DP buf trans tables, but the low vswing eDP tables have 10 entries. Thus the eDP tables can only be used safely with DDI A and E. We try to catch cases where DDI B/C/D gets used with the wrong number of entires in some parts of the code, but not everywhere. Let's move the code to deal with that deeper into intel_ddi_get_buf_trans_edp(). And for sake of symmetry do the same in intel_ddi_get_buf_trans_dp(). That would also avoid explosions in the rather unlikely case that the DP tables would get revised to 10 entries as well. Signed-off-by:
-
Ville Syrjälä authored
default_index contained in the BXT buf_trans tables is actually useless. For DP we should always have a valid level selected (otherwise the link training logic would be buggy), and for HDMI we can just do what the other platforms do and pick the correct entry in intel_ddi_hdmi_level(). Signed-off-by:
-
Ville Syrjälä authored
encoder->type is unreliable for DP/HDMI, so pass it in explicity into cnl_ddi_vswing_sequence(). This matches what we do for BXT. v2: Pass intel_encoder down to cnl_ddi_vswing_program(), and clean up the argument types while at it Signed-off-by:
-
