- 11 Mar, 2021 30 commits
-
-
Andrzej Pietrasiewicz authored
struct v4l2_ctrl_h264_pps members obviously match picture parameter syntax, not sequence parameter syntax. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Bastien Nocera authored
Captured using a raw IR receiver. Manual linked in the remote definition itself. Signed-off-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Takashi Iwai authored
dvb_usb_device_init() copies the properties to the own data, so that the callers can release the original properties later (as done in the commit 299c7007 ("media: dw2102: Fix memleak on sequence of probes")). However, it also stores dev->desc pointer that is a reference to the original properties data. Since dev->desc is referred later, it may result in use-after-free, in the worst case, leading to a kernel Oops as reported. This patch addresses the problem by allocating and copying the properties at first, then get the desc from the copied properties. Reported-and-tested-by:
Stefan Seyfried <seife+kernel@b1-systems.com> BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181104Reviewed-by:
Robert Foss <robert.foss@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
dvb_usb_device_init() allocates a dvb_usb_device object, but it doesn't release the object by itself even at errors. The object is released in the callee side (dvb_usb_init()) in some error cases via dvb_usb_exit() call, but it also missed the object free in other error paths. And, the caller (it's only dvb_usb_device_init()) doesn't seem caring the resource management as well, hence those memories are leaked. This patch assures releasing the memory at the error path in dvb_usb_device_init(). Now dvb_usb_init() frees the resources it allocated but leaves the passed dvb_usb_device object intact. In turn, the dvb_usb_device object is released in dvb_usb_device_init() instead. We could use dvb_usb_exit() function for releasing everything in the callee (as it was used for some error cases in the original code), but releasing the passed object in the callee is non-intuitive and error-prone. So I took this approach (which is more standard in Linus kernel code) although it ended with a bit more open codes. Along with the change, the patch makes sure that USB intfdata is reset and don't return the bogus pointer to the caller of dvb_usb_device_init() at the error path, too. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Brad Love authored
Manufacturing has switched from ISOC to bulk transport, the pid has accordingly changed to signify this. 0x2013:0x0461 is an ISOC 461e v2 0x2013:0x8461 is a bulk transport 461e v2 Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Brad Love authored
Manufacturing has switched from ISOC to bulk transport, the pid has accordingly changed to signify this. 0x2013:0x0258 is an ISOC 461e 0x2013:0x8258 is a bulk transport 461e Signed-off-by:
-
Christian Hewitt authored
Add a keymap and bindings for the simple IR (NEC) remote used with Minix 'NEO' branded Android STB devices. Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Signed-off-by:
-
Sean Young authored
The in_use variable is set to true when a lirc file is opened, and ir transmit can only be done by writing to a lirc file descriptor. As a result when in_use is read, it is always true, so we might as well remove it. Signed-off-by:
-
Sean Young authored
It's best if this condition is reported. Signed-off-by:
-
Sean Young authored
The carrier, duty cycle etc are not device dependent, and they can be changed at runtime. By moving them into the allocated struct, we can make the device specific structures smaller, and we no longer need to copy the struct. Signed-off-by:
-
Sean Young authored
The lirc ioctls should be used for this, not module parameters. Signed-off-by:
-
Sean Young authored
Remove lots of superfluous debug messages which just log the function name. Also, there is no need to announce the various parameters of the device. This can be discovered via lirc ioctl if needed. Signed-off-by:
-
Sean Young authored
This ensure that the rc device shows up correctly in sysfs. Signed-off-by:
-
Sean Young authored
These fields are not referenced anywhere. Signed-off-by:
-
Daode Huang authored
It is redundant to do irqsave and irqrestore in hardIRQ context. Signed-off-by:
Daode Huang <huangdaode@huawei.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Sphinx doesn't allow placing those cross-reference identifies everywhere. Misplacing them cause those warnings: Documentation/userspace-api/media/v4l/hist-v4l2.rst:818: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/hist-v4l2.rst:853: WARNING: undefined label: reserved-formats (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst:47: WARNING: undefined label: reserved-formats (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/subdev-formats.rst:39: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/subdev-formats.rst:53: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/subdev-formats.rst:67: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/subdev-formats.rst:83: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/subdev-formats.rst:97: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/subdev-formats.rst:140: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst:75: WARNING: undefined label: decoder-cmds (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-dqevent.rst:234: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst:156: WARNING: undefined label: dv-bt-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst:41: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst:246: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst:269: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst:100: WARNING: undefined label: modulator-txsubchans (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst:119: WARNING: undefined label: tuner-rxsubchans (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst:167: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst:245: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst:396: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header) Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst:73: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header) Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Mauro Carvalho Chehab authored
At least at pdf output, part of the VBI drawings are not visible. Signed-off-by: -
Mauro Carvalho Chehab authored
It makes more sense to place the xvideo example at the body, keeping the footnote only to justify the design decision. While this makes the text better, it also fixes the PDF output. Signed-off-by: -
Mauro Carvalho Chehab authored
There are lots of tables that are not properly displayed in LaTeX/PDF. Fix the tablecolumns, add longtable where needed and LaTeX formatting macros, in order to address such issues. Signed-off-by: -
Mauro Carvalho Chehab authored
Add missing format macros for the tables there to be properly output. While here, also remove the empty ".. note::" markup. It should be noticed that ".. [1]" markups will generate footnotes, and not a note within the main text body. Signed-off-by: -
Mauro Carvalho Chehab authored
The Picture Parameter Set Flags table for H-264 doesn't output well on PDF. There are missing format instructions for LaTeX, and the columns are too long. Reduce the size of the second column, as 16 bits is more than enough for the current flags usage, and add the needed bits for it to be properly output in PDF format. Signed-off-by: -
Mauro Carvalho Chehab authored
Sphinx/LaTeX doesn't work well with literal blocks. Due to that, V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF ends being writing outside the table (and even outside the page). We need to not only change the table size and font size, but also to change the message, in order to avoid this bug. So, improve the text a little bit, while ensuring that the literal will be written at the beginning of the second line. Signed-off-by: -
Mauro Carvalho Chehab authored
The bayer formats have a subtitle, specifying how many bits they use. Add a title markup to those, as otherwise they look weird, specially at the PDF output. Signed-off-by: -
Mauro Carvalho Chehab authored
The text is repeating the name of the control, which causes it to be displayed outside the page with PDF output. Besides that, this is the only JPEG control doing that. Removing the name duplication doesn't affect the description, but, instead, make it nicer. Signed-off-by: -
Mauro Carvalho Chehab authored
Those tables nicely fits on PDF output without any hack. Yet, they are using a very small font, and have tabularcolumns. Clean it up, and convert it to an ASCII artwork, as it makes easier to see that no hacks are needed to display it ;-) Signed-off-by: -
Mauro Carvalho Chehab authored
One of the MPEG-4 profiles has a missing description. Add it. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of using "- 1", use "minus one". The reason is that, if the table is split like: V4L2_FWHT_FL_COMPONENTS_NUM_MSK 0x00070000 The number of color components - 1. One might not realize the meaning of the second line. As a side effect, using text instead of arabic numbers is more appropriate for formal documents like this spec. Signed-off-by: -
Mauro Carvalho Chehab authored
While fixing issues with PDF generation, I noticed that bit 8 was missing for WSS 625 format. While here, convert the literal block into a tables, as it becomes more visible. I opted to move the payload into a separate table, as Sphinx has troubles with complex nested tables. This way, it should work fine on both html and LaTeX/PDF formats. Signed-off-by: -
Mauro Carvalho Chehab authored
The default way to document control enums is via tables. Use one here too. As the table is simple, just use ASCII artwork. Signed-off-by: -
Mauro Carvalho Chehab authored
Those tables have small cells that fit nicely without requiring line beaks. So, they don't need tabular columns, as Sphinx/LaTeX can adjust the width on such tables. Signed-off-by:
-
- 06 Mar, 2021 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
- 05 Mar, 2021 6 commits
-
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy) - rsxx missing -EFAULT on copy_to_user() failure (Dan) - rsxx remove unused linux.h include (Tian) - kill unused RQF_SORTED (Jean) - updated outdated BFQ comments (Joseph) - revert work-around commit for bd_size_lock, since we removed the offending user in this merge window (Damien) * tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST. rsxx: Return -EFAULT if copy_to_user() fails block/bfq: update comments and default value in docs for fifo_expire rsxx: remove unused including <linux/version.h> block: Drop leftover references to RQF_SORTED block: revert "block: fix bd_size_lock use" -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A bit of a mix between fallout from the worker change, cleanups and reductions now possible from that change, and fixes in general. In detail: - Fully serialize manager and worker creation, fixing races due to that. - Clean up some naming that had gone stale. - SQPOLL fixes. - Fix race condition around task_work rework that went into this merge window. - Implement unshare. Used for when the original task does unshare(2) or setuid/seteuid and friends, drops the original workers and forks new ones. - Drop the only remaining piece of state shuffling we had left, which was cred. Move it into issue instead, and we can drop all of that code too. - Kill f_op->flush() usage. That was such a nasty hack that we had out of necessity, we no longer need it. - Following from ->flush() removal, we can also drop various bits of ctx state related to SQPOLL and cancelations. - Fix an issue with IOPOLL retry, which originally was fallout from a filemap change (removing iov_iter_revert()), but uncovered an issue with iovec re-import too late. - Fix an issue with system suspend. - Use xchg() for fallback work, instead of cmpxchg(). - Properly destroy io-wq on exec. - Add create_io_thread() core helper, and use that in io-wq and io_uring. This allows us to remove various silly completion events related to thread setup. - A few error handling fixes. This should be the grunt of fixes necessary for the new workers, next week should be quieter. We've got a pending series from Pavel on cancelations, and how tasks and rings are indexed. Outside of that, should just be minor fixes. Even with these fixes, we're still killing a net ~80 lines" * tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits) io_uring: don't restrict issue_flags for io_openat io_uring: make SQPOLL thread parking saner io-wq: kill hashed waitqueue before manager exits io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return io_uring: don't keep looping for more events if we can't flush overflow io_uring: move to using create_io_thread() kernel: provide create_io_thread() helper io_uring: reliably cancel linked timeouts io_uring: cancel-match based on flags io-wq: ensure all pending work is canceled on exit io_uring: ensure that threads freeze on suspend io_uring: remove extra in_idle wake up io_uring: inline __io_queue_async_work() io_uring: inline io_req_clean_work() io_uring: choose right tctx->io_wq for try cancel io_uring: fix -EAGAIN retry with IOPOLL io-wq: fix error path leak of buffered write hash map io_uring: remove sqo_task io_uring: kill sqo_dead and sqo submission halting io_uring: ignore double poll add on the same waitqueue head ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix the usage of device links in the runtime PM core code and update the DTPM (Dynamic Thermal Power Management) feature added recently. Specifics: - Make the runtime PM core code avoid attempting to suspend supplier devices before updating the PM-runtime status of a consumer to 'suspended' (Rafael Wysocki). - Fix DTPM (Dynamic Thermal Power Management) root node initialization and label that feature as EXPERIMENTAL in Kconfig (Daniel Lezcano)" * tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap/drivers/dtpm: Add the experimental label to the option description powercap/drivers/dtpm: Fix root node initialization PM: runtime: Update device status before letting suppliers suspend -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Make the empty stubs of some helper functions used when CONFIG_ACPI is not set actually match those functions (Andy Shevchenko)" * tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: bus: Constify is_acpi_node() and friends (part 2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Fix a sleeping-while-atomic issue in the AMD IOMMU code - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d driver - Fix status code definitions for Intel VT-d - Fix IO Page Fault issue in Tegra IOMMU driver * tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix status code for Allocate/Free PASID command iommu: Don't use lazy flush for untrusted device iommu/tegra-smmu: Fix mc errors on tegra124-nyan iommu/amd: Fix sleeping in atomic in increase_address_space()
-
