- 22 Mar, 2017 40 commits
-
-
Martin KaFai Lau authored
This patch adds hash of maps support (hashmap->bpf_map). BPF_MAP_TYPE_HASH_OF_MAPS is added. A map-in-map contains a pointer to another map and lets call this pointer 'inner_map_ptr'. Notes on deleting inner_map_ptr from a hash map: 1. For BPF_F_NO_PREALLOC map-in-map, when deleting an inner_map_ptr, the htab_elem itself will go through a rcu grace period and the inner_map_ptr resides in the htab_elem. 2. For pre-allocated htab_elem (!BPF_F_NO_PREALLOC), when deleting an inner_map_ptr, the htab_elem may get reused immediately. This situation is similar to the existing prealloc-ated use cases. However, the bpf_map_fd_put_ptr() calls bpf_map_put() which calls inner_map->ops->map_free(inner_map) which will go through a rcu grace period (i.e. all bpf_map's map_free currently goes through a rcu grace period). Hence, the inner_map_ptr is still safe for the rcu reader side. This patch also includes BPF_MAP_TYPE_HASH_OF_MAPS to the check_map_prealloc() in the verifier. preallocation is a must for BPF_PROG_TYPE_PERF_EVENT. Hence, even we don't expect heavy updates to map-in-map, enforcing BPF_F_NO_PREALLOC for map-in-map is impossible without disallowing BPF_PROG_TYPE_PERF_EVENT from using map-in-map first. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Fix in verifier: For the same bpf_map_lookup_elem() instruction (i.e. "call 1"), a broken case is "a different type of map could be used for the same lookup instruction". For example, an array in one case and a hashmap in another. We have to resort to the old dynamic call behavior in this case. The fix is to check for collision on insn_aux->map_ptr. If there is collision, don't inline the map lookup. Please see the "do_reg_lookup()" in test_map_in_map_kern.c in the later patch for how-to trigger the above case. Simplifications on array_map_gen_lookup(): 1. Calculate elem_size from map->value_size. It removes the need for 'struct bpf_array' which makes the later map-in-map implementation easier. 2. Remove the 'elem_size == 1' test Fixes: 81ed18ab ("bpf: add helper inlining infra and optimize map_array lookup") Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joao Pinto authored
The dma operation mode configuration routine was wrongly moved to a function (stmmac_mtl_configuration) that is only executed if the core version is >= 4.00. Fixes: 6deee222 ("net: stmmac: prepare dma op mode config for multiple queues") Reported-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Tested-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joel Scherpelz authored
This commit adds a new sysctl accept_ra_rt_info_min_plen that defines the minimum acceptable prefix length of Route Information Options. The new sysctl is intended to be used together with accept_ra_rt_info_max_plen to configure a range of acceptable prefix lengths. It is useful to prevent misconfigurations from unintentionally blackholing too much of the IPv6 address space (e.g., home routers announcing RIOs for fc00::/7, which is incorrect). Signed-off-by:
Joel Scherpelz <jscherpelz@google.com> Acked-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: allow concurrency in core and minor fixes The first 10 patches of this series prepare nfpcore for concurrent accesses. This will be needed by upcoming hwmon and devlink patches. Most locking is already in place, the patches in this series iron out a few bugs. Last 5 patches are fixes and cleanups to the netdev code, including removal of doorbell pointers used only on old versions of the chip, removal of unnecessarily defensive code and flushing xmit_more more carefully on error paths. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Since we no longer need to keep the FW enabled for .ndo_close() to work we can always stop FW after reconfiguration failure. This seems to make most FWs more resilient to faults (at least in error injection scenarios). Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Device open and close handlers check if the device is already in the desired state. Thanks to our reconfig infrastructure this should not be necessary, there doesn't seem to be any code in the driver which depends on it. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
In case of ring full or DMA mapping error remember to flush xmit_more delayed kicks. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
NFP6000 doesn't use queue pointers/doorbells for RX, it uses 'done' bit in descriptors. Remove the pointers from data structures. Since we are saving space in rx_ring structure make fields we previously compressed to 16bits word size again. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Fix warning which was using netdev_warn() instead of dev_warn() to early. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
When acquiring an area fails we can't call function doing both release and free. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Core should detect when someone is trying to request an access window which is too large for a given type of access. Otherwise the requester will be put on a wait queue for ever without any error message. Add const qualifiers to clarify that we are only looking at read- -only members in relevant functions. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
When signal interrupts waiting for an area to become available we assume success. Pay attention to the return code. Unpack the code a little bit to make it more readable. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
msleep_interruptible() returns time left to wait, not error code. Return ERESTARTSYS when interrupted. While at it correct a comment and make the polling a bit more aggressive. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We shouldn't access area_cache_list without its lock even to check if it's empty. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Document which fields of nfp_cpp are protected by which locks. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
After mutex cache removal we can put the mutex code in a separate source file. This makes it clear it doesn't play with internals of struct nfp_cpp any more. No functional changes. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
CPP mutex cache was introduced to work around the fact that the same host could successfully acquire a lock multiple times. It used to collapse multiple users to the same struct nfp_cpp_mutex and track use count. Unfortunately it's racy. Since we now force all nfp_mutex_lock() callers within the host to actually succeed at acquiring the lock we no longer need the cache, let's remove it. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The global device lock is acquired to search the resource table. The lock is actually itself part of the table (entry 0). Therefore if someone asks for resource 0 we would deadlock since double locking is no longer allowed. Currently the driver doesn't try to lock that resource so let's simply make sure we fail graciously and not add special handling of this case until really need. Hide the relevant defines in the source file. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
NFP can be connected to multiple machines via PCI or other buses. Access to hardware resources is arbitrated using locks residing in device memory. Currently nfpcore only respects the mutexes when it comes to inter-host locking, but if we try to acquire the same lock again, on one host - it will simply return success because owner of the lock is already set to that host. This makes the locks useless for arbitration within one host and unfair because whichever host grabbed the lock will have a chance to reacquire it without others getting a shot. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The dma_mapping_error() returns true if there is an error but we want to return -ENOMEM and not 1. Fixes: 65e0ace2 ("net: dwc-xlgmac: Initial driver for DesignWare Enterprise Ethernet") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Jie Deng <jiedeng@synopsys.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Use the rtnl_dump_all to dump all netconf handlers that have been registered. Allows userspace to send a dump request for PF_UNSPEC and get all families. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== Clean up PHY MMD accessors This series cleans up phylib's MMD accessors, so that we have a common way of accessing the Clause 45 register set. The current situation is far from ideal - we have phy_(read|write)_mmd() which accesses Clause 45 registers over Clause 45 accesses, and we have phy_(read|write)_mmd_indirect(), which accesses Clause 45 registers via Clause 22 register 13/14. Generic code uses the indirect methods to access standard Clause 45 features, and when we come to add Clause 45 PHY support to phylib, we would need to make these conditional upon the PHY type, or duplicate these functions. An alternative solution is to merge these accessors together, and select the appropriate access method depending upon the 802.3 clause that the PHY conforms with. The result is that we have a single set of phy_(read|write)_mmd() accessors. For cases which require special handling, we still allow PHY drivers to override all MMD accesses - except rather than just overriding the indirect accesses. This keeps existing overrides working. Combining the two also has another beneficial side effect - we get rid of similar functions that take arguments in different orders. The old direct accessors took the phy structure, devad and register number, whereas the indirect accessors took the phy structure, register number and devad in that order. Care must be taken when updating future drivers that the argument order is correct, and the function name is not merely replaced. This patch set is against net-next. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Make mmd_phy_indirect() use the same terminology as the rest of the code, making clear what each address is - phy address, devad, and register number. While here, remove the "inline" from this static function, leaving it to the compiler to decide whether to inline this function, and get rid of unnecessary parens. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Remove the indirect MMD read/write methods which are now no longer necessary. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Convert micrel to the new read_mmd/write_mmd driver methods. This Clause 22 PHY does not support any MMD access method. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Switch everyone over to using phy_read_mmd() and phy_write_mmd() now that they are able to handle both Clause 22 indirect addressing and Clause 45 direct addressing methods to the MMD registers. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
lan78xx appears to use phylib in a rather weird way, accessing the PHY partly through phylib, and partly by making direct accesses to it, including to the Clause 45 registers. As the indirect MMD accessors are going away, update this driver to use the plain phy_(read|write)_mmd() accessors instead. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Make phy_(read|write)_mmd() generic 802.3 clause 45 register accessors for both Clause 22 and Clause 45 PHYs, using either the direct register reading for Clause 45, or the indirect method for Clause 22 PHYs. Allow this behaviour to be overriden by PHY drivers where necessary. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Move the phy_(read|write)__mmd() helpers out of line, they will become our main MMD accessor functions, and so will be a little more complex. This complexity doesn't belong in an inline function. Also move the _indirect variants as well to keep like functionality together. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thierry Reding authored
Prior to the recent multi-queue changes the driver would configure the queues to use the AVB mode, but the mode then got switched to DCB. The hardware still works fine in DCB mode, but my testing capabilities are limited, so it's safer to revert to the prior setting anyway. Signed-off-by:
Thierry Reding <treding@nvidia.com> Acked-By:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thierry Reding authored
Recent changes to support multiple queues in the device tree bindings resulted in the number of RX and TX queues to be initialized to zero for device trees not adhering to the new bindings. Restore backwards-compatibility with those device trees by falling back to a single RX and TX queues each. Signed-off-by:
Thierry Reding <treding@nvidia.com> Acked-By:
Joao Pinto <jpinto@synopsys.com> Tested-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thierry Reding authored
The MAC RX queues always need to be enabled in order to receive network packets. Remove the condition that this only needs to be done for multi- queue configurations. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Felix Manlunas authored
Fix Coverity scan errors by not dereferencing lio->glists_dma_base pointer if it's NULL. See http://marc.info/?l=linux-netdev&m=149002294305614&w=2Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gao Feng authored
When user_mss is zero, it means use the default value. But the current codes don't permit user set TCP_MAXSEG to the default value. It would return the -EINVAL when val is zero. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andy Zhou says: ==================== net-next sample action optimization v4 The sample action can be used for translating Openflow 'clone' action. However its implementation has not been sufficiently optimized for this use case. This series attempts to close the gap. Patch 3 commit message has more details on the specific optimizations implemented. --- v3->v4: Enhance patch 4. Fix two bugs pointed out by Pravin, Remove 'is_sample' variable. v2->v3: Enhance patch 4, Rafctor to move more common logic to clone_execute(). v1->v2: Address Pravin's comment, Refactor recirc and sample to share more common code ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
andy zhou authored
Added clone_execute() that both the sample and the recirc action implementation can use. Signed-off-by:
Andy Zhou <azhou@ovn.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-